DRIVER_POWER_STATE_FAILURE, caused by ntkrnlpa.exe, caused by the address ntkrnlpa.exe + debf0

Similar Questions

• What doesWhat is the cause of the msg blue screen error stop: 0 x 90909220, 0xBF94BAD1, 0 x 00000000, 0 x 00000000?

  Under XP SP3

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Your system seems to start OK and then crash or didn't he start not at all?

  Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.

  Sometimes BlueScreenView will involve XP files as being the cause of the accident (ntoskrl.exe, win32k.sys, hal.dll etc.) but they are probably not the real cause of the accident (BSV is doing the best he can).  You will need to either pick up some example crashes over and look through them, or find somewhere the XP files are not the 'cause' or you can upload your files to your SkyDrive crash dump and someone with the windows debugging tools can help take a look at them more closely.

  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

  Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

  ==================================================
  Dump file: Mini102911 - 02.dmp
  Crash time: 2011-10-29 04:54:36
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 22f43
  Stack address 1: i8042prt.sys + 27fb
  Stack address 2: i8042prt.sys + 2033
  Battery 3 address: ntoskrnl.exe + 6e715
  Computer name:
  Full path: C:\WINDOWS\Minidump\Mini102911-02.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 2600
  Size of the dump file: 94 208
  ==================================================

  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

• Windows 8 blue screen - DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe

  I have a new Sony Vaio Pro and have experienced outages of system 3 times.  All the accidents that happened after I've restored from hibernation and were related to the bug check DRIVER_POWER_STATE_FAILURE.  After the first two accidents, I ran Sony diagnostics on the memory and hard drive SSD and they passed the test.  I even sent my Vaio Pro to the repair depot to Sony for a test on the memory, hard drive and other hardware and they all passed.

  I found my Vaio Pro last Wednesday and updated the Windows 8 from scratch.  This morning, after the resumption of hibernation, I realized my Bluetooth mouse did not work.  So I stop the laptop hoping a restart could solve the problem.  However, it took almost 5 minutes before they would stop and restart Windows gave a warning:

  "Experienced problem with closed Windows.  Your PC fell on problem.  This problem case your PC to restart.

  BlueScreen Viewer it pointing DRIVER_POWER_STATE_FAILURE caused by driver ntoskrnl.exe.

  BlueScreen details as follows:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  The problem seems to be caused by the following file: ntoskrnl.exe

  DRIVER_POWER_STATE_FAILURE

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.

  If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading.

  If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options and then

  select Safe Mode.

  Technical information:

  STOP: 0X0000009F (0X000000000000012C, 0XFFFFFA80196707C0, 0 X 0000000000000004, 0XFFFFF880009EC810)

  Ntoskrnl.exe - address 0xfffff80189072106 base at 0xfffff8018901e000 DateStamp

  0x51a966cd

  Here's my minidump file:

  https://DL.dropboxusercontent.com/u/1928780/093013-7531-01.dmp

  File Msinfo32.NFO:

  https://DL.dropboxusercontent.com/u/1928780/Msinfo32.nfo

  Dump file memory (do not know why this file is nearby big 550MO):

  https://DL.dropboxusercontent.com/u/1928780/memory.dmp

  p.s. I think this may have something to do with my Bluetooth driver I had experienced many times the Bluetooth driver has been disabled by Windows and the event viewer reported "the Local Bluetooth is not indeterminate way and will not be used.  The driver has been unloaded. "

  Thanks in advance,

  William

  Hi William,.

  The attached file of the DMP is the error checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  9F, {4, 12 c, fffffa80196707c0, fffff880009ec810} error checking

  Parameter 1 of the bugcheck is 4 , which indicates that the transition of power over waiting to synchronize with the Pnp subsystem.

  The 2nd setting is 12 c , which indicates that it is exceeded for a total of 12 seconds.

  By default, the crash dump is failing UsbHub3.sys who is the pilot of HUB-USB3 (System driver and not the true cause, and is due to the fault by something else).

  If we look further into the dump:

  ERROR: Module load completed but symbols could not be loaded for btmhsf.sys

  FAILURE_BUCKET_ID: 0x9F_4_btmhsf_IMAGE_UsbHub3.sys

  Implicit thread is now fffffa80 196707 c 0

  ^^ If we run one! thread on the address fffffa80 196707 c 0:

  Child-SP RetAddr: Args to child: call Site
  fffff880 '20b42f20 fffff801' 890bb7cb: fffffa80'00000001 00000000'00000000 00000000'00000003 00000000'00000000: nt! KiSwapContext + 0 x 76
  fffff880 '20b 43060 fffff801' 890ba60f: fffffa80'18b23ef8 fffff880 '0115a 178 00000000 00000000' fffff880' 0622a 202: nt! KiCommitThreadWait + 0x23b
  fffff880'20 b 43120 fffff880'06114700: fffffa80 '16115fd8 fffff880' 00000001 00000000' 00000000 00000000'00000000: nt! KeWaitForSingleObject + 0x1cf
  "fffff880 '20b431b0 fffff880' 06117ef0: 00000000 ' 00000018 fffff880 ' 0622a2f8 00000000'00000000 00000000'00000018: btmhsf+ 0 x 33700
  fffff880 '20b431f0 fffff880' 060fb1e4: fffffa80'17 has 00030 fffff880 '20b433b0 fffff880' 0622a2f8 00000000' 00000000: btmhsf+ 0x36ef0
  fffff880 '20b 43260 fffff880' 060e2b84: 0000057f 'e9eaddd8 00000000' 00000127 fffff880 '0622a2f8 fffff880' 0115 has 178: btmhsf+ 0x1a1e4
  fffff880 '20b432b0 fffff880' 060e2cce: 00000000'00000008 fffff880 '20b 43370 00000000'00000008 fffff880' 20b 43378: btmhsf+ 0x1b84
  fffff880 '20b432e0 fffff880' 0114ecb0: fffffa80'16153860 00000000 00000000' fffff8a0 '04c3a748 fffff801' 89403cfe: btmhsf+ 0x1cce
  "fffff880 '20b 43310 fffff880' 010e881d: 00000000 ' 00000127 fffff880 ' 20b433b0 00000000'00000119 fffffa80'16153860: Wdf01000! FxPkgPnp::PnpEventSurpriseRemoveIoStarted + 0x2c
  "fffff880 '20b 43340 fffff880' 010e9032: fffffa80 ' 16153980 fffffa80' 16153988 fffffa80 ' 16153860 fffff880 ' 20b434c0: Wdf01000! FxPkgPnp::PnpEnterNewState + 0x1a1
  "fffff880 '20b433e0 fffff880' 010e8cdd: 00000000 ' 00000000 fffff880 ' 20b434c0 fffffa80 ' 16153970 fffffa80' 16153860: Wdf01000! FxPkgPnp::PnpProcessEventInner + 0 x 122
  fffff880'20 b 43450 fffff880'0114 701 d: 00000000 00000000' fffffa80 '16153860 fffff880' 00000000 00000000 00000000': Wdf01000! FxPkgPnp::PnpProcessEvent + 0x18d
  fffff880 '20b434f0 fffff880' 010d1ecf: fffffa80'16141 b 30 fffff880 '20b 43570 00000000 00000000' fffffa80' 1615d1d0: Wdf01000! FxPkgFdo::_PnpSurpriseRemoval + 0 x 25
  fffff880 '20b 43520 fffff880' 010c99da: fffffa80'197 b 9010 fffffa80 '197b 9010 fffffa80' 197b 9010 00000000 00000000': Wdf01000! FxPkgPnp::Dispatch + 0x18f
  "fffff880 '20b 43580 fffff880' 010c9aa6: fffffa80' 197b 9010 00000000'00000005 fffffa80 ' 161531 c 0 fffff880 ' 062fca20: Wdf01000! FxDevice::Dispatch + 0x19a
  fffff880 '20b435c0 fffff880' 062e3cbe: fffffa80 '197b 9010 00000000 00000005' fffffa80' 1615e190 00000000' 00000000: Wdf01000! FxDevice::DispatchWithLock + 0xa6
  fffff880 '20b 43600 fffff880' 062e3484: fffffa80 '197b 9010 00000000 00000000' fffffa80' 1615e190 00000000' 00000000: bthport! BthDefaultPnpHandler + 0x2a
  fffff880 '20b 43630 fffff880' 062e2cc1: fffffa80 ' 1615e190 fffff880 '062fca17 fffffa80' 1615e190 fffffa80 ' 197b 9010: bthport! BthHandleSurpriseRemoval + 0xc4
  fffff880 '20b436b0 fffff880' 062e2b04: fffffa80' 197b 9010 00000000'00000701 fffff880 '062fca20 fffff880' 20b 43800: bthport! BthHandlePnp + 0x16d
  fffff880 '20b 43700 fffff801' 8940a8f7: fffffa80 '1615e040 00000000' c00000bb 00000000 00000000' fffff880' 00a 82180: bthport! BthDispatchPnp + 0 x 68
  "fffff880'20 b 43750 89526 fffff801 39 d: 00000000 ' 00000017 fffff880 ' 20b 43819 fffffa80 ' 16137710 fffffa80' 16137060: nt! IopSynchronousCall + 0xc7
  fffff880 '20b437c0 fffff801' 895265e6: fffff8a0 ' 04069710 00000000'00000308 fffffa80' 16137060 00000000 00000000': nt! IopRemoveDevice + 0xd9
  fffff880'20 b 43880 fffff801'89526501: fffffa80'16137710 00000000 00000000' fffff8a0 '0c432a01 fffff880' 20b 43930: nt! PnpSurpriseRemoveLockedDeviceNode + 0xaa
  fffff880'20b438d0 fffff801'89526468: fffff8a0 00000000'00000000 00000000'00000000 ' 0c432a70 fffffa80'16137710: nt! PnpDeleteLockedDeviceNode + 0x5d
  fffff880 '20b 43910 fffff801' 89525bcb: 00000000 00000000' fffff880 '20b43a70 fffff8a0' 0b89e6f0 00000000'00000005: nt! PnpDeleteLockedDeviceNodes + 0 x 98
  fffff880 '20b 43970 fffff801' 893b52e5: fffff880'20b43b88 00000000 00000000' fffff8a0 ' 05764100 fffff8a0' 00000000: nt! PnpProcessQueryRemoveAndEject + 0x2c3
  fffff880'20b43ae0 fffff801'89418346: fffff8a0'04069710 00000000'00000000 00000000'00000001 00000000'00000000: nt! PnpProcessTargetDeviceEvent + 0x9d
  "fffff880 '20b43b20 fffff801' 890b62a1: fffffa80 ' 196707 c 0 fffff8a0 ' 0b89e6f0 fffff801 ' 8941805 c fffffa80' 16748130: nt! PnpDeviceEventWorker + 0x2ea
  "fffff880 '20b43b80 fffff801' 8904afd9: fffffa80 ' 00180000 00000000 00000080' fffff801 ' b 890, 6160 fffffa80 196707 c 0: nt! ExpWorkerThread + 0 x 142
  fffff880 '20b43c10 fffff801' 890ff7e6: fffff880 ' 00a 82180 fffffa80 ' 196707 c 0 fffffa80 ' 06741b 00 fffffa80' 06765940: nt! PspSystemThreadStartup + 0 x 59
  fffff880'20b43c60 00000000' 00000000: fffff880 '20b 44000 fffff880' 20b3e000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  We can see the various routine calls BTHUSB Device bthport.sys (Bus Bluetooth driver) who then finally enter various before btmhsf.sys some error checking.

  btmhsf.sys is the Intel Proset Bluetooth HighSpeed filter driver and probably the culprit here. Update this driver ASAP - http://downloadcenter.intel.com/default.aspx?iid=gg_support-EN_01+home_downloadctr
  or uninstall it if you do not plan to use BlueTooth.

  ---------------------------------------------------------------------

  If after doing the above, you are still blocked, remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes:

  -AVG removal tool http://www.Avg.com/us-en/utilities

  In addition, to answer your question as to why the MEMORY. DPM is so important because it's a dump of memory rather than a small kernel. Kernel memory dumps contain all the kernel memory was working with and that was in use at the time of the accident, that is why it is larger and provides much more information.

  Kind regards

  Patrick

• Stop: 0x000000d1 the problem seems to be caused by the following file: ntoskrnl.exe DRIVER_IRQL_NOT_LESS_OR_EQUAL

  I get the BSOD every once in a while during a variety of programs. I've updated all my drivers. I use bluescreenview watching dump files and that's what I have.

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.
  The problem seems to be caused by the following file: ntoskrnl.exe
  DRIVER_IRQL_NOT_LESS_OR_EQUAL
  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:
  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.
  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.
  Technical information:
  STOP: 0X000000D1 (0XFFFFB880018FA1A0, 0 X 0000000000000002, 0 X 0000000000000008,
  0xffffb880018fa1a0)
  Ntoskrnl.exe - address 0xfffff800030dc1c0 base at 0xfffff8000305d000 DateStamp
  0x4fa390f3

  Hello

  Ntoskrnl.exe is a component of Windows which means than anything else he has led astray.

  BlueScreenView is a great tool for searching for information on minidumps. In particular
  the bottom panel where display the information on 3rd party drivers is useful. Of course
  other debuggers, such as WinDBG, might be able to glean information from minidumps.

  ------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  in this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ==============================================================

  BCCode: D1 0x000000D1

  Check these KB

  Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
  from sleep or standby extended: "STOP: 0x000000D1".
  http://support.Microsoft.com/kb/978982

  Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
  system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
  http://support.Microsoft.com/kb/2320550

  Those 7 other KB Articles are available
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

  --------------------------------------------------

  Think video drivers especially if it may be others. Refer to the section of driver in my credits
  methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
  antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
  When you arrive at the driver and tests of memory sections do reference to generic methods in following
  message and then back to the if necessary troubleshooting tool.

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  
  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the professional, full and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Equium A60 - error caused by the RAM problem - Windows tool does not work!

  Hi all

  When closing my laptop, I got the blue "screen of death" and it restarts, windows came with this analysis of the accident: "error caused by the memory problem to live: run the Windows tool". I downloaded diagnostic tool (mstinst.exe), he opened so I got "windiag.iso" and he burned on a CD like they told me (the use of 'Record Now') and then I put in the CD drive and rebooted my computer. But it did not launch the tool! Does anyone know why it went wrong and how can I make it work? Even if I got the tool to work, I would be able to solve the problems of RAM anyway, just taking my laptop to a repair center?

  Thanks :)

  Hello

  I put t know if you have seen this page http://oca.microsoft.com/en/windiag.asp but there you can find a detailed explanation of how to use the Windows Memory Diagnostic tool.

  Good luck!

• What is the cause of the message "Waiting for Service ' Console CVD activity

  I have two related questions.

  basis, I just started centralizing 200 computers ish, all except 2 appears fine, 2 questions, one below and another with VSS errors.  This message is just for the question "in waiting for the Service.

  1. What is the cause of the message "Waiting for Service ' Console CVD activity and is there anywhere that documents these meanings of status.
  2. No idea where I should start troubleshooting the message "Waiting for Service ' I get to the computer below.

  I have a computer with this status which comes to have installed the client and will not be to centralize.  Other computers seem to work properly (centralized).

  The computer is to ping requests, but appears as disconnected in the console.

  I deleted the CVD and restarted the centralization CVD using a different policy on a different volume without change.

  Journal of the history of CVD below

  Description of the Type of weather

  31/01/2014-08:52:32 AUDIT_EVENT assign device, device: PC30866 (1995), cardiovascular disease: 11614, political CVD: don't Default - every 4hrs - no drive D (1.1)

  02/05/2014-13:53:58 politics AUDIT_EVENT assign CVD, CVD: PC30866 (11614), CVD policy: Migration Post-quotidien (1.0)

  31/01/2014 General Office EVENT 20:44:46 service error

  31/01/2014 General Office service EVENT 17:39:04 error

  31/01/2014 14:44:34 EVENT has not finished downloading, internal error, exception attached

  31/01/2014 General error from the EVENT 13:05:15 service office

  31/01/2014-12:30:37 TRANSACTION_START PC30866 - centralize endpoint

  the transaction log has an inscription mentioning a failure (not sure if it is the server or PC related) disc.

  Diseases cardiovascular diseases cardiovascular name Type State layer size (MB) data transferred (MB) branch reflector savings start time end time transfer (MB)

  Of the endpoint PC30866 centralize 11614 reading disc failed 169648 1531 0 31/01/2014 12:30:37 05 d 04:16:52

  The next event is in the application event log and the Mirage event log for the failed computer. (there were not all other errors in the paper since the deployment of mirage customer and there is no errors in the system event log)

  Event type: error
  Event source: VMware Horizon Mirage customer
  Event category: no
  Event ID: 0
  Date: 31/01/2014
  Time: 20:44:46
  User: n/a
  Computer: PC30866
  Description:
  Error general service office
  Unexpected exception taken (sender Name:Wanova.Desktop.Service.exe
  There is no policy context.
  , the object exception System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
  System.Collections.Generic.List to ' 1.set_Capacity (Int32 value)
  System.Collections.Generic.List to ' 1.EnsureCapacity (Int32 min)
  to System.Collections.Generic.List' 1. Add (T item)
  at Wanova.Net.DataTransfer.TransferStreams.SignatureResponseStream.ProcessChunk (ChunkInfo chunkInfo)
  at Wanova.Net.DataTransfer.TransferStreams.ChunkInfoDecodingStream.BeginWrite (Byte [] buffer, TransferStreamWriteCallback onWriteComplete)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteDataStreamTask (DataHandlerExecutionTask task, MarkCompletionCallback markCompletionCallback)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteTask (IExecutionTask task, MarkCompletionCallback markCompletionCallback)
  Wanova.Net.DataTransfer.ExecutionController.QueueListener (Group IExecutionTask)
  to Wanova.Common.ThreadUtils.ParamaterizedWorkItem'1.Run (object fakeParam)
  at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context (Object state)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
  at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem)
  at System.Threading.ThreadPoolWorkQueue.Dispatch)
  at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback (), ends at True)

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  It turns out that this computer seems to have hard drive errors, so not a matter of mirage.

• FF 40 for Linux. Blank white page without control. Own profile fixed but causes blocks colored instead of the text in the address bar.

  Because the update to 40 FF lance a blank white screen with no controls, no toolbar or address bar. I can create a new profile in the Profile Manager and then launch firefox functional but a previous bug still exists, the text in the address bar is replaced by blocks of solid colors. The only solution I know because this is: config > gfx.xrender > toggle true to false, but on the relaunch firefox returns the white screen.

  2 should I proceed to report a bug, and where should I report it? On bugzilla? Is it easy to report a bug or find out if she is already underway on?

  The system I use is Lubuntu 14:04

  I found my own solution to the problem, which was caused by the incompatibility of the 40 FF with the Lubuntu versoin I used 14:04, so I've updated at 15:04 and FF still works, though only after the creation of another new profile.

• The printer receives do not all data. It is caused by the MAC address filtering.

  How can I solve this problem.

  The printer attempted to join the network but does not receive any data.  This may be caused by the MAC address filtering. If MAC address filtering is enabled and you want to keep enabled, add the MAC address of your printer in the list of devices allowed for your wireless access point or router before continuing.

  HP Officejet 4500 - G510n wireless all-in-one printer

  Not at all use MAC filtering.  Make sure it is off in your router.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• option not iOS 9.2 caused all the music offline to disappear and "make available offline".

  iOS 9.2 caused all the music offline to disappear - where the option "make available offline"?

  The worst part of this is that iOS 9.2 was supposed to solve problems by making playlists in offline mode. This update is a disaster! All the playlists or albums that I try to do in offline mode are partially downloaded... Apple music is going from bad to worse.

• How to check defective R50e caused by the Panel or the cable of the Panel?

  It's been long that I couldn't see my windows on the screen. I have to hook it up to an external monitor to display the content in my windows. Everything works well except the Panel screen does not display anything, but only dull black screen. It is more under warranty and I do not extend the warranty at all because it is old enough. In addition, I already have more recent laptop Y410. I just want to know if I can fix it by myself, rather than putting this side into dust lol

  How to check if this is the faulty Panel or it is caused by the cable of the Panel? I have to keep count when perform you a health check?

  your backlight on the screen has failed, you need to replace the LCD itself.

  The manual is here.

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-53169.html

• The power spectral density function counts inaccurate amplitude caused by the window function?

  I'm new to this forum, so please let me know if this would correspond better to a different discussion forum.

  Here's the question:

  I would like to know if the power spectral density function ("FFT PSD for 1 Channel.vi") automatically compensates for the loss of the amplitude of entry caused by the window function.  In other words, is a specific window correction factor applied within the PSD vi or do I apply manually?

  Details of the background:

  I tried to answer the question myself by generating a sine wave sampling, it as it is periodic in record time (i.e. 0 to each end of recording time).  The frequency of the sine wave was such that the frequency would exactly correspond to a spectral line in the PSD.  Then I generated the PSD of the sine wave twice: once using a Hanning window and once using a rectangular window (not on average in both cases).  The rectangular extent of the PSD with windows to the frequency of the sine wave is 1.5 times the size of the PSD with a Hanning window applied.

  The experience above indicated to me that a manual setting of the PSD output for the function of window was necessary, however, I repeated the above experiment using random vibration data and does not clear 1.5 x factor.  I have also been informed by his colleagues that the PSD should set for the window function.

  Thank you for your comments.

  Spectral leakage.  When you use a finished sample data from the spectrum resulting is the convolution of the spectrum of the signal as if it extended indefinitely in time with the spectrum of the window.  Even if you do not use a window function, you actually have a rectangular window the same width as the sample size.

  Draw out of the VI PSD with all style of trace to show points to the data points. Turn off Auto scale on the X axis, and expand the graph around your pic. Look at the results of different windows.  In any case, there are several values non-null.  With actual sampled data of limited duration, you will never get the idealized line spectrum.

  If summarize you the output spectral value remains close to 3.2 for all windows.

  Lynn

• Error caused by the remote control?

  Hello

  I just got a great help here, and everything worked.  However, now when I run the code, I get error caused by the remote command on my counter (Agilent 34461).  However, when I run in debug mode by clicking on the light bulb, this error occurs.

  The change I made was that I initialized the measure outside the while loop so that I didn't have any initiialize it for each iteration, and I added a reading?

  Any ideas why this would cause this error?

  After reading the Manual , I found that you really want to use "configures: currentC ' for your installation command.  Apparently, the measurement system causes playback to occur.

• Using XP Professional... problems caused after the download of Service Pack 3

  Using XP Professional... problems caused after the download of Service Pack 3

  Using XP Professional... problems caused after the download of Service Pack 3

  Only these security updates are not downloaded successfully:

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2742596)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2756918)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2789643)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2804577)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2833940)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2844285)

  Microsoft Fix - It ran... computer & rebooted... closed repeatedly...

  Problem persists... Help!

  Lane

  It is a common problem with updates of .NET. Here are the steps I follow

  First try this...

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If the above does not make it...

  Open Add or remove programs, click on .NET 3.5 and choose repair. I got around to test if this fix actually .NET 2.0 and 3.0 of the .NET also, but it's worth it. I do not know if it can also cancel updates already installed .NET. If so, they will reinstall when you perform a Windows update that is the next step after the repair.

  If the repair does not fix it, will add and remove programs and uninstall the .NET Framework 3.5, 2.0, then 3.0.
  Visit Windows Update, select Custom scan and under software, optional install this...

  

  It must be installed by itself. Windows Update will not let you do otherwise.

  When he did install (I forgot if she asks for a restart or what not), scan again and all updates for .NET 2.0, 3.0 and 3.5 of the .NET .NET must appear. Choose to install.
  A new analysis to ensure that they properly installed.

  If all goes well, that will solve the problems you face.

  Make sure you come back and let us know which method worked for you or if you still have problems, I have to run a cleaning tool.

  Good luck!

• How to analyze a crash dump to determine the root cause of the dump?

  Hello, I have a desktop computer that breaks down frequently.  EventViewer showed that blue screens keep on occurring.  We suspect it is a new software that has been installed and have a few dumps, but would appreciate any advice on playing the dumps to make sense.  Thank you
  \|/

  Hello

  BlueScreenView execution and it displays the information in a very readable format.
  is simple and fast. BlueScreenView is not as accurate for the specific CAUSE
  WinDBG however it brings a wealth of information - and it's still very
  simple to use,

  BlueScreenView - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  When you click on each top of the article Bug_Check the lower part displays the
  Names of files containing more information. Sometimes, the CAUSE is the real cause
  but more likely, it's what has been assigned (or pushed to the fault) by something
  on the other. Check commands/options menus, and right-click
  While in BlueScreenView.

  How read partial memory dump files that Windows creates for debugging
  http://support.Microsoft.com/kb/315263/en-us?p=1

  Check this thread for more information using BlueScreenView, MyEventViewer and
  other methods of troubleshooting BlueScreens - answers top 3 (+ 1 more). This
  Convenience store is for Windows 7, however, she also works for XP and Visa.
  the main differences are using RUN instead of start - search (for XP).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  WinDBG is a more complete debugging tool.

  How to read the memory dump file that is created by Windows if an incident occurs
  http://support.Microsoft.com/kb/315263/en-us

  Using the Microsoft Windows Debugger (WinDbg)
  http://kipirvine.com/ASM/4th/debug/WinDbg/index.htm

  WinDbg
  http://en.Wikipedia.org/wiki/WinDbg

  Download and install the debugging tools for Windows (use the SDK)
  http://www.Microsoft.com/whdc/devtools/debugging/default.mspx

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">