BSOD computer / Multiple tests to the beginning of

Similar Questions

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Having multiple computers using the server POPS via Thunderbird. A new computer has IMAP server and cannot send or receive emails via Thunderbird. Help

  With the help of Mozilla Thunderbird - multiple computers use the POP server, but a new computer uses the IMAP server. Mail or back does not work
  Can we change the IMAP POP server to make it easier. All my other computers POP and mail is perfect.
  What can I do?

  First question is your email provider does support IMAP protocol?
  If this isn't the case, that is why it does not work.
  If they do, IMAP is a protocol much better use to check email from multiple devices.
  There are a lot of good tutorials on the differences between POP and IMAP if you can do your own research on this.

  You don't change an account from one protocol to another.
  You delete the account and add back with the correct protocol.
  Thunderbird has a tendency to select IMAP as a default value. You need to stop right there and make the POP changes if that's what you want or need.

• IMac is not able to share multimedia files with multiple users on the same computer.

  We just bought a new IMac that we were very excited.  We have phones Apple and iPads, replacement and ten year with a new Mac old PC made since.

  Now, the trouble begins. For more than ten years Windows had several usernames on the same machine and have been able to have a shared folder only for music, pictures and video that my iTunes program and others could acsess and share from several user names. This kept all in one place for new photos families by me or my wife and our 30 gigabytes of music that comes from our CDs was available at bolt of us. Now in train to implement on IMac should be easy but is impossible.  after transferring the music to my login information, it cannot acsess all files on my login. I am not even able to share or provide his acsess. I can move the iTunes folder to my shared folder. She can get acsess now but iTunes says that the library file is locked. I worked with care from Apple on the phone for that sold, but they believe it will not be possible without creating two copies of the 30 gigabytes of music for each of us. who would take more hard drive when it failed too.  Sharing is not any help. These files were before iTunes. I'm not pay 30 dollars a month to store in icloudcor use a google reader slow to the Internet connection when everything's fine here. Apparently Applow programmers do not believe in sharing of multimedia files between two users on the same device, even if a PC does that very well. My choice here is so far have duplicates of all the photos, music and videos loaded on the disc for me and my wife, charge all the media for an external hard drive which for some reason any all Apple programs will share, or return the mac to another PC that will be able to make several connections with sharing music and photos. Apple if you are reading this you are 10 years behind on that. Not everyone is born in the last five years and bought their music on iTunes to be able to use home sharing. Home sharing cannot help this. your applications should be able to be told to use the media files shared without import copies to readers of the user. I am very disappointed. Someone else has any ideas for that?  I have pictures, not iPhoto. I have a week more to be able to return it. I'm not interested in making a fake account that is always connected to share or maintaining of me constantly connected. It should have been easy, I had to be happy to play with new software.

  Photos, iPhoto and iTunes libraries must appear on an external hard drive that is formatted as shown below to be used by multiple users on the same Mac:

  

  So get a properly formatted external HD and move your iPhoto/pictures of her as well as your iTunes library.  This way all your iMac users can access and use both libraries.

  An alternative to the external HD method is to partition your internal hard drive into two partitions, one for libraries.  It is formatted as shown above and be large enough to contain the libraries and allow the expansion of libraries.

  

• Scan multiple pages in the same file on the computer

  How can I scan multiple pages on the same computer file on my HP Officejet Pro 8600 Plus?  Currently, it will scan each page to a separate computer file only.  Scan a document and then when asked if I want to scan another page I say Yes and the scanner.  However, they still attend separate computer files.

  Thank you!

  Thank you very much!

• A custom step of multiple digital limit test | Hide the limit tab

  Hi all

  I am trying to create a custom step of multiple digital limit test. The custom step by itself poplulates the value of the limits of the measure. So I plan on Hide tab limits within the parameters of the step. Can someone guide me on how to do it?

  Thank you

  Prasaanthan

  Make sure that you have checked the box 'Show hidden properties' in the StationOptions > preferences. Otherwise, you will never find the table refers to erik.

  Norbert

• Zero readings of strain at the beginning of a test using the Daq Assistant

  I worked on code that uses the wizard daqmx for reading and writing of strain, temperature and voltage of a cdaq-9174, with NI 9211 and NI 9237 cards.  Everything works fine in the code, but I want to be able to zero distortion at the beginning of a test data.

  I tried to create a way to make sure I click a button, and it will be zero only strain as an autobalance data.  Anyone have any suggestions on how to achieve this?

  Hi Fwowe,

  As I understand it, you're trying to have is a flaw. I have programmed a small VI than acomplishes this task.

  Take a look and tell me what you think.

  Best regards!

  Carlos O

  Technical sales engineer

  National Instruments

• Is it possible to set up for multiple users on the same computer to avoid entering the e-mail and the password

  Original title: Multi users

  Is it possible to set up for multiple users on the same computer to avoid entering the email and password every time that a new user want to check emails?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, you need help in the creation of multiple user accounts. I've surely you will help find a solution on the issue.

  What is the operating system installed on the computer?

  User accounts, several people can easily share a single computer. Each person can have a separate user account with unique settings and preferences, such as a screen saver or desktop background. User accounts control files and programs users can access and what types of changes users can make to the computer. As a general rule, you'll want to create standard accounts for most computer users.

  If you use Windows Vista or Windows 7, see the article below:

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account

  For Windows XP users:

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783?WA=wsignin1.0

  Hope this information helps. Answer please if you have more queries about Windows.

• Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

  Question asked by Neil Clark (me)
   
  I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   
  Sunday, August 22, 2010 01:54

   

  Windows Live K - Ann C response.

   

  Hi Neil,

  This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:

  
  Important: before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

  Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.

  
  BACKUP REGISTRY KEYS:

  1. click on Start, click on run

  2. type regedit and click Ok

  3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

  4. click on file and click on export

  5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

  6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

  7. navigate to the location and find the name of the file with the .reg extension and click Open.

  Note: you will be prompted that importation has been properly registered in the register.

  
  TROUBLESHOOTING STEPS:

  1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

  2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

  a. click on the [] sign + next to HKEY_CURRENT_USER

  b. scroll and click on the [] sign + next to Software

  c. scroll down and click on the [+] sign next to Microsoft

  d. scroll down and click on the [+] sign next to Windows

  e. scroll down and click on the [+] sign next to CurrentVersion

  f. scroll and click on the [] sign + next to the Explorer

  3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

  4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

  5. close the Windows Registry Editor and restart your computer.

  Thank you

  K Ann C.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

   
  Thursday, August 26, 2010 09:27

   

  Response from Neil Clark

   

  Hi K - Ann,

  Thank you for the above information.

  I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.
  
  So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

  Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  Can you tell me what I need to do to work around this problem of backup of the registry?

  I look forward to receiving your response.

  Thank you

  Neil Clark.

   
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Monday, August 30, 2010 22:19

   

  Response of Windows Live Mechell P.

  Posted by Neil Clark

   

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  For this error, you must contact the Support Windows via Microsoft answers Forum link below:
  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Thank you
  Mechell P.

  Hi NeilRClark,

  When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

  Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

  To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

  Check out this link to do the same thing:

  How to capture a file or a folder in Windows XP

  To take ownership of a file or folder

• I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled.

  I have problems activating windows x 64 bits.

  I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled. Recently, I updated my motherboard and changed to a quad core. I would appreciate help from the administrator. Legitimately, I bought my version of Vista x 64 tiger direct for years and relied on it as my OS for a while now. Any live medium or other assistance, advice, etc., would be appreciated. This operating system has been reinstalled several times, and the last time I had to reinstall it is because I closed windows because he wasn't updated correctly, and then restarting the operating system has not yet worked so I HAD to reinstall. Now windows says that my code is already used. I'm ready to take pictures, show my keycode and do anything to get my system online. Vista is saying I need to activate within 3 days. Also, I have problems installing Service Pack 1. Which maybe has something to do with my questions? Please, someone help me!

  Mark,

  In this case, you will need to contact Microsoft by phone for your landline number. Usually, most product keys have some time, they can be turned on before you reach this State.

  Best,

• What should I do when my computer is to do the diagnostic test, what happens with missing \windows\system,32\winload,exe?

  Please help my friend

  When my computer is to do the diagnostic test, what happens with \windows\system,32\winload,exe lack what should I do now, it's for a friends computer

  Please see: Missing file \Windows\system32\winload.exe

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• Cannot copy of my printer, but not able to print from my computer to test the page,

  I have a photosmart printer 310a all-in-one. I run on windows 7 64 bit using a dell xps desktop computer.  I used the hp doctor capable of printing the test page with accuracy but cannot print from my computer.  Wireless network works fine.  I check connectivity.  According to the solutions of hp, the printer is online and working properly, but when I try to print it is unable to do.

  Thank you for your help.  I decide to try another computer to see if it is printed.  He did it wasn't the hp printer that was causing the problem. It was the new version of mcafee on my desktop that is causing the problem.  Also, I disabled mcafee found out that I was able to print without difficulty.  I hope this helps other people with the problem.  I tried to fix my mcafee but decide to go with another company for the antivirus and spyware

• BSOD and how to refresh the computer

  I have a gateway to window computer 8 I've had for a year now and never restarts time I try to put on my computer it won't let me because it goes to the home page and comes up with a message with different types of BSOD errors and then force, then whenever the computer load it keeps then me on reviews and it never let's me back to my original account and I need a way of doing things to normal or if someone can tell me how to reset the computer that would also be very useful.

  Original title: my computer problems

  Hey Nasir,

  I understand that your computer gives error BSOD and your user account is signing you as a guest user and you also want to know about reset.

  Sorry to hear about the embarrassment caused and thank you for the detailed description.

  To help you better please answer the following questions:

  1. What is the brand of computer?
  2. You have a third-party security program installed on the computer?
  3. You recently made any changes to the computer?

  This issue could be due to the following issues:

  • Drivers are corrupt.
  • Damaged user account.
  • Problems of virus and malware.

  Learn more about BSOD please refer to the article:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

  Follow the suggestions below and check if this can help:

  Method 1: Safe Mode

  Follow the bottom of the article which will help you to start the computer in safe mode and check if it works fine in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Search your computer in safe mode, all the third-party program installed on the computer are disabled in this mode.

  Method 2: steps can be followed to BSOD

  This article will help you solve the BSOD errors on the computer:

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  How to reset the computer

  Please follow the article below and this will give you the procedure step by step to start the reset of the computer:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Refer to: refresh your PC without affecting your files.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I was converting pdf to word. I tried to download multiple documents, but the system froze.  I closed the Acrobat Reader. Now, I see no export tools more.  I even tried to restart the computer.  I am currently with my account.

  I was converting pdf to word. I tried to download multiple documents, but the system froze.  I closed the Acrobat Reader. Now, I see no export tools more.  I even tried to restart the computer.  I am currently with my account.

  Hi bulldogcl1,

  Please perform this cleanup tool to uninstall the reader Download Adobe Reader and Acrobat cleaning - Adobe Labs tool, reboot your system & install the latest Adobe Acrobat Reader DC Acrobat Reader DC Learn & support , sing with your Adobe ID to use the export to service PDF format using Acrobat Reader. Export PDF to Acrobat Reader DC.

  You can also use this online https://cloud.acrobat.com/exportpdf service

  Let me know if it solves your problem.

  Kind regards
  Nicos