BSOD Endless. Cannot boot to the desktop.

Similar Questions

• Cannot boot to the desktop after Windows Update

  Original title: windows vista startup

  I recently downloaded IE9 to my laptop and updates of windows (prereqs) now my laptop does not open in Windows, when I turn it on, it also says start windows repair but all I get is a blank desktop with a bar and microsoft Corp. under any suggestions

  Hello

  Try to follow the steps in this link and do a system recovery: http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7 (steps are also applicable for Windows Vista)

• "Configuring updates: stage 3 of 3-0% complete" start-up cirque. CANNOT BOOT TO THE DESKTOP

  Hello there,
  I desperately need help... I don't want to have to reload Vista Home Premium and all my software and get all authenticated (which total galley is the procedure!) once again. I installed the latest Java today from Java.com and everything seems to work very well. Latyer on I started the installer of my software to sync Western Digital and after that I said which files to sync to my removable drive from the hung computer. I thought that after 1/2 hour It sinply would not go anywhere, so I used Ctrl-alt-del to cancel then restarted and Western digital software.

  Now my computer is going in circles. It goes like this:

  -power on
  -beep system
  -Microsoft animation line starts
  -screen goes black
  -Orb appears
  -"Curtain" screen comes on saying:

  Configuring updates: stage 3 of 3-0% complete
  Do not turn off your computer

  -system reboots

  And it just happens again and again and again. He never at my office. I tried starting with the last start of 'good', safe

  mode and I went to my vista cd and made routine repairs, but all without success.

  Can it be fixed without having to do a major resettlement me?

  Thanks for your help.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.

• Quick access Acer/turn off the option to boot to the desktop

  I am running Windows 10 on my Aspire AIO. Quick access Acer has a power button to boot to the desktop. I don't know what it's really like Windows 10 boots already straight to the desktop. If I choose to - boot to the desktop, what will do?

  Thank you

  John

  JohnBobin,

  This feature was something set up for Windows 8 really, since it starts up the screen of the tile when it entered in Windows. Since you have 10 Windows and it starts on the screen in any case, you have really no need to switch it on.

  I can't access an AIO which has this feature currently, but I'd be willing to say that if you the activated, the value your AIO tablet mode and rebooted, it would probably start in desktop mode. It's something you can test, if you wish, but I think that this feature can only be ignored at this stage.

• How to boot to the desktop instead of metro?

  How to boot to the desktop instead of metro?

  You do not have. If you place the tile Office upstairs to the left of the position of the beginning of the screen, you can press ENTER after the connection to go straight to the office.

• cannot connect to laptop - boots to the desktop, then log out automatically

  Original title: laptop, connect to the computer

  My laptop will go to the sign in screen, but when I connect it shows my desktop but then said disconnection and goes back to the login screen.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are able to boot into safe mode without any problem?

  Method 1:

  Step 1:

  I suggest to start in safe mode and check if the problem is resolved. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Check if the problem persists. If the problem does not persist then, it might be that some startup item causes this problem. I suggest you perform a clean boot and check.

  Step 2:

  To perform a clean boot follow the steps mentioned in the link given below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M40 - cannot boot from the recovery cd after format HARD drive

  Hello

  After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

  After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

  Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

  Hello

  Can you see the HARD drive with all the details in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
  If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

  But this should not affect booting from a bootable CD.
  Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

  The question is; Why you are unable to boot from any CD?
  Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
  If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.

• Satellite A200 - cannot boot from the recovery disc - code 1

  I have Vista business and my laptop is running slow and is full of rubbish.
  I have in the past used my drive recovery to completely re - install vista and start from a fresh version.

  However, I tried this once and it says that it cannot boot from cd - code 1.

  Can someone tell me what it is and how to reinstall vista?

  Hmm. strange.
  Are you sure you have the right recovery disk?
  Are you abele to boot using another drive as MS Win XP CD or Linux CD bootable?

• Cannot access on the desktop, the laptop readers.

  I have two computers running Win 7 Ultimate. 1 desktop and 1 laptop. I'm running through a Netgear wireless router. Office is hard wired to the router via an ethernet connection. The laptop has a wireless connection. I also have a cable for color laser printer to the router via an ethernet connection.

  The laptop can see the desktop and can access the printer and some of the hard disks on the desktop. The laptop can detect and access G: and H: drives on the desktop but not C: D: E: and Z: drives. G: and H: drives are located on an external USB disk door. The other drives are connected internally to the desktop. Trying to access drives unaccessable to the desktop, I get the following error message.

  "Windows cannot access \\DESKTOP\Desktop C:.  You are not allowed to access \\DESKTOP\Desktop c. contact your network administrator to request access. »

  The office displays the icon of the laptop in the network, but I get the same error message when I try to access the laptop, but the laptop is overridden to desktop in the above error message. The error code is: 0 x 80070035.

  All readers have enabled file sharing and permissions set for everyone. In fact each player is set up exactly the same thing, and both computers are set up exactly the same except for the name of the computer (eg. Mobile - Office).

  Does anyone have any suggestions?

  Thanks for any help.

  Ed Wood

  Hello Edawood,

  I suggest check to ensure that all services of collective housing began and then retry the connection:

  Open the services menu by clicking Start and then type "services.msc" then on enter.

  Locate the following services in the list:

  ·         DNS client

  ·         Function Discovery Provider Host

  ·         Function Discovery Resource Publication

  ·         Peer networking grouping

  ·         HomeGroup provider

  ·         HomeGroup listener

  ·         SSDP Discovery

  ·         UPnP device host

  Sure they were launched and retry the connection.

  To start the service, double click on it and press the 'start' button in the dialog box that appears.

• How to remove the login screen. I removed the password and always get log on screen. How can I return to boot to the desktop?

  I have temporarily protected password and have since removed the password to none. I always get the log on screen, while it does not require a password, I would like to remove all together and just boot the desktop, with no sign of user in.

  Click Start and in the search for box netplwiz type press enter.

  Uncheck users must enter a user name and password to use this computer.

  Click apply.

  When the automatically log on dialog box appears, enter the user name desired for automatically to connect to Windows 7 with. Then enter your password. If your password is blank then leave these fields empty.

  Click on OK.

  Let me know if you need more assistance.

  -Josh

• Cannot boot from the HARD drive in AHCI on Satellite C mode

  I tried to get this satellite working for these past two weeks. I think I've tried all of the suggestions I found on this forum and others.

  My problem: I can not boot from drive c: in AHCI, only in compatibility mode. I can boot from the D: (recovery partition) in AHCI mode. When the recovery is complete, and when it gets to the first reboot, try to boot from the system newly created on the C:, I return the compatibility mode.

  I replaced the drivers on the C: drive.

  I extracted the AHCI drivers and copied in the root of a USB bootable. I try to do a clean install of windows 7, I get to where it shows the partitions. He tells me that it can not load the system on any of the partitions, I the AHCI mode (if the mode is set to compatibility it will load the system in one partition).
  I select "load drivers" and select the driver in the root directory, it loads the driver and then reports that it can not load the system on any of the partitions.

  I'm puzzled. I acquired pilots everywhere, the last set of drivers I used to try to do a clean install, I have acquired the Canadian official Toshiba site.

  Does anyone have any suggestions?

  Concerning
  Boyde

  BTW, this is Windows 7, I'm trying to get back to.

  Can someone help me with this?

  Boyde

• Portege A200 - cannot boot from the recovery disc

  Hi, I have a Portege A200 and an original unused Toshiba Recovery CD.

  When I go to recover, the DVD drive just turns and turns and nothing happens. I have tried different methods of booting with the disk to like, by pressing the C key, select boot from CD/DVD or just turn it on with the DVD in the drive. Same problem, the disc turns right away.

  I also checked the drivers TOshiba download page and let down when I found out that there are several drivers for the same thing, like the 3 drivers LAN! Which should I use? Also, I can confirm that the CD/DVD drive works fine because I already loaded windows XP, no problem.

  Any suggestion is appreciated.

  Kieran99.

  Hey Kieran99,

  I also think that s is not a problem of the CD/DVD drive. If it turns over and over again once he recognizes a disc but it can t be read correctly.

  Regarding your question about drivers I think that it of fairly easy. I can recommend the vendor and device ID in Device Manager. With these identification numbers, you can search on this website http://www.pcidatabase.com/ to determine the LAN controller. All that s! :)

  In addition, you can check the ID s in Device Manager, if you click the LAN card properties > Details > PCI\VEN_xxxx & DEV_xxxx

• Cannot boot from the CDROM on a satellite A100-549

  Hello.

  I think I have a problem with my BIOS because I can't start something of my CDROM.

  I removed the recovery off the DVD-ROM drive CD and restarted my computer.

  Then set up the boot sequence to boot from the CD, and nothing happened.
  My laptop just start with the normal boot sequence, I mean from the hard drive.

  I put a livecd for the CDROM drive and the effect was the same, the cd does not start and the computer began the ususal boot sequence.

  Can someone tell what is the problem?

  Thank you

  Hello

  Try to use all possible methods to set ODD as first boot device:
  1. press the key C immediately after switching on the unit, keep it down for a few seconds
  2 put in the BIOS
  3. choose F12 after departure upward and choose the CD/DVD device

  Honestly, it's very strange and if nothing helps, maybe you should contact your dealer or authorized Toshiba service partner directly. They check the disc.

  BTW: have you noticed any other problems with ODD Windows?

• Satellite A10: Cannot boot from the recovery CD after the replacement of the motherboard

  Heres one in your brain is going...

  I recently started a format hard drive via the normal recovery CD, but it never finished as long as the power cut.

  Not to worry I thought, I kept all my data and a new motherboard was on order.

  The fitting of the new Council, I tried to boot from the recovery disc and all I get is 'non-system disk '.

  Then I replaced the HARD drive with a former to check the functionality of the Cd. The old disks (I tried two) both still booted from the cd and their HDs has worked fine once in windows.

  However...

  When I try to start any of these 'good' HDs from the cd nothing happens, nada zilch. In fact they will not start even to a 'Beginner PC' recovery disk either, so it's not the Toshy recovery disk.

  Another weird thing is when I go into the bios by pressing ESC the power upward and then F1 and try to change the boot sequence and press end to exit and save, nothing happens.

  If the CD is not defective because it is recognized in windows
  The recovery disks may not be at fault because the other disks also fail to start.

  This is not a drive problem hard as other HDs start normally (but not Cd)

  This could be a fault on the new motherboard, perhaps a problem with bios, or the sequence of events suggests something else?

  Any suggestions would be welcome

  Paul h

  Hello

  Long story. In my opinion you should write is a little shorter but with more useful information.
  I am interested in one thing: have you got a new mainboard or used one?

  To be honest, I'm also confused with the recovery disc you are using. The history is confusing.

  > so this isn't the Toshy recovery disk.
  Can you please tell us what kind of recovery CD are you using exactly?