BSOD error - included file link

Similar Questions

• 'include the linked files '.

  In Illustrator 6, you should check 'include linked files' whenever you save a document.  If you do not, the next time you open it, you are looking for the missing link.  Is it possible that I can put a value by default so that it automatically checks each time?

  Include files linked automatically incorporates the files. They are no longer bound. The best way is to have the linked file in the same folder that it HAVE original.

• Bad Pool Caller error (Windows 8) - including the link to my Minidump file

  Hello!

  I recently received 4 blue screens; the first three were probably related to Avast, so I uninstalled ( Memory_managementerror)

  Later, says error Bad_Pool_Caller

  I have already travelled through further discussion, so here is the link to my Minidump file

  https://www.dropbox.com/s/sinr1qwyjjj43qw/dump.zip

  Also, here are the results of WhoCrashed

  
  

  Thank you very much!

  
  

  (Local) information system
  computer name: KISS
  Windows version: Windows 8, 6.2, build: 9200
  Windows dir: C:\Windows
  CPU: GenuineIntel Intel (r) Core i7-3630QM CPU @ 2.40 GHz Intel586, level: 6
  8 logical processors, active mask: 255
  RAM: 21425922048 total
  VM: 2147352576, free: 1917325312

  Crash Dump Analysis
  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Wednesday, October 29, 13 16:57:33 this computer crashed
  crash dump file: C:\Windows\Minidump\102913-8937-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
  Bugcheck code: 0xC2 (0x7, 0x11C1, 0x11AC6DA0, 0xFFFFFA8011AC6DB0)
  Error: BAD_POOL_CALLER
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the current thread is doing a bad pool request.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 29, 13 16:57:33 this computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: gdi32.sys (GDI32! D3DKMTPresent + 0xA)
  Bugcheck code: 0xC2 (0x7, 0x11C1, 0x11AC6DA0, 0xFFFFFA8011AC6DB0)
  Error: BAD_POOL_CALLER
  Bug control description: This indicates that the current thread is doing a bad pool request.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: gdi32.sys.
  Google search: gdi32.sys BAD_POOL_CALLER

  Wednesday, October 29, 13 12:15:41 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\102913-13828-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
  Bugcheck code: 0x1A (0xFFFFF70001080000, 0x1C03, 0 x 5003, 0x1C0400003846)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.

  
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 29, 13 11:42:59 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\102913-23578-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x40C90)
  Verification of error code: 0 x 24 (0xFFFFF8800ACAE0C8, 0xFFFFF8800ACAD900, 0xB50019060B, 0xFFFFF8800197C552)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Tuesday, October 28, 13 18:22:31 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\102813-13562-01.dmp
  This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0x263E7)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880049B53E7, 0xFFFFF8800975A4E8, 0xFFFFF88009759D20)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\dxgmms1.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: DirectX Graphics MMS
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Conclusion
  5 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  Gdi32.sys

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP!  
  If you don't know what it means that you're probably not

  1-Memtest. (You can learn more about running memtest here)
  Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
  Boot from the CD and let it run at least 5 or 6 passes.
  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  Test the sticks individually and if you find a good, test it in all slots.

  If a well-known stick fails in a card mother slot but not an another is probably the slot.
  
  
  2-Driver Verifier (for full instructions, see our wiki here)
  Using Driver Verifier is a dubious proposition.
  Most of the time it will crash and it will tell you what is the driver, but sometimes, it will crash and will not tell you the driver.
  Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
  Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  Go to Start and type "auditor" (without the quotes) and press enter
  Select "create of the custom settings (for code developers)" and click "Next".

  Select "Select individual settings from the list complete" and click "next".
  Select all elements EXCEPT FOR "Low Resource Simulation"
  Do not check to win 8 Concurrency stress test and the verification of the conformity of DDI, click "next".
  Select "Select the driver names from a list", then click on "next".
  Select all drivers NOT supplied by Microsoft, and then click "Next".
  Select 'Finish' on the next page.
  
  Restart the system and wait as he crashed to blue screen.
  Continue to use your system normally and if you know what are the causes of the crash, do it several times.
  The objective here is to get the system crash because Driver Verifier is stressing out the drivers.
  If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  
  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

• Server file throwing error include

  http://www.sdmconsultingllc.com/philosophy/manage-digital-media-solution.html

  Original HTML:

  < /tr >

  < b >

  "" < td bgcolor = "#000033" > <!-#include = file '... /includes/Bottom-links.php '-->

  < table >

  < /tr >

  < /table >

  Last Source URL above

  < /tr >

    <tr >

  " <td bgcolor="#000033">[an error occurred while processing this directive] '.

  < /td >

    < /tr >

  < /table >

  Include the URL

  http://www.sdmconsultingllc.com/includes/bottom-links.php

  Of in dreamweaver, it seems good. When loading it does not work.

  Ideas?

  I was duplicate what I did when making the Digital system of concession site.

  HTML is the home page

  PHP is that server side include

  Most of the servers did not analyse include files in default .html files.  Check with your host.

  If you are on a Linux server, rename the parent with the extension .shtml or .php pages.

  If you are on a Windows Server, use .asp or .shtml (if supported).

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I found the error of => niincludes.h (18) : fatal error C1083: cannot open include file: 'NiVisaComponent.h': no such file or directory

  I checked a few path, "C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2005\VCNET\Include.
  I found a lot of files, but only does not NiVisaComponent.h, anyone know how to download or is this file has changed the name?

  I already install the driver NI-VISA v15.0 but still does not have this file.

  I have not "C:\Program NIUninstaller Instruments\MeasurementStudioVS2005\VCNET\Include" because my laptop is 64-bit.

  Hello

  If you see the file Readme VISA 15, you'll see that Visual Studio 2005 is not supported. It seems that the most recent version of VISA that supports VS 2005 is Version 5.2 for c# / VB.NET and 5.0.2 for MFC C++ (with Measurement Studio 2009).

• Partition to opt on fabric interconnect an includes file system errors

  After a downgrade from painful recovery (failed upgrade from 2.2.3d to 2.2.6d) everything works again, but I see

  Partition to opt on fabric interconnect an includes file system errors (see attachment)
  

  To remedy this unpleasant error advice are appreciated.

  Hello Walter.

  The bug that you run is;

  https://Tools.Cisco.com/bugsearch/bug/CSCus79160/?reffering_site=dumpcr

  I stumbled upon this problem in the past, the TAC will load the debugging plugin and just check a few blocks. Anika, a system launch is another fix but it is a longer process, if you open a TAC case don't forget to mention the bug above and they can try this work around first.

  I would like to know if you have any other questions or need help.

  Qiese Sa'di

• Update PT8.52 to 8.53 for cause of functional database HRCS90: dbtsfix.sqr # include file error

  People,

  Hello. I was installing Human Capital and Campus Solution 9.0 with PeopleTools 8.53 with Oracle Linux 5. My database server is Oracle 11 GR 1 material. Because the human database functional and 9.0 Solution Campus is written with 8.52 PeopleTools, I need to upgrade to 8.53.

  When I run the Task 4-1-3 script dbtsfix.sqr as below:

  Double-click the C:\PT8.53\bin\sqr\ora\BINW\sqrw.exe file and fill in the message:

  Report a name: C:\PT8.53\sqr\dbtsfix.sqr

  Username: MyName

  PWD: mypass

  Database: HRCS90

  Arguments of report:-ZIFC:\PT8.53\sqr\pssqr.ini-iC:\PT8.53\sqr-oC:\PT8.53\log\dbtsfix.log-garder

  After you click OK, the error message is as below:

  Cannot open # include file:'setenv.sqc'. No such file or directory. For PeopleSoft SQR: abandonment of the program.

  I checked and opened all # include files with Notepad in the C:\PT8.53\sqr directory, but still not the error message above.

  My question is:

  How to run the script dbtsfix.sqr in a correct way and solve the above error?

  Thank you.

  I usually have the following parameters in a shortcut to SQRW.exe on my desktop.

  [PS_HOME]\bin\sqr\ora\BINW\sqrw.exe-ZIF[PS_HOME]\sqr\pssqr.ini-i [PS_HOME] \sqr\-fC:\temp\output.htm-keep - printer: ht]

  If we take a glance at PeopleBooks, the-i parameter indicates where to look for include files:

  -Idir_list

  Specifies the list of directories looking for PeopleSoft SQR during the processing of the #INCLUDE directive when the include file does not exist in the current directory, and no path is specified for the file. Directory names must be separated by commas (,) or semicolons (;). For UNIX/Linux-based systems, if your shell uses semicolons as the command delimiter, you must precede each semicolon with a backslash (\). Always add the directory at the end of each directory name character. See the F indicator for a list of characters in the directory, sorted by operating system.

  When compared with your settings, I see a difference in this i - parameter

  -ZIFC:\PT8.53\sqr\pssqr.ini-IC:\PT8.53\sqr-OC:\PT8.53\log\dbtsfix.log-garder

  You may want to try adding a------after the path of the i - parameter. So that would be

  -IC:\PT8.53\sqr\

  Also, take a look on:

  SQRW.exe settings

  SQR - PeopleSoft Wiki error codes

• How to link to an another spry tab in the include file.

  Hi all

  I am new to using spry tabed panels, acordians, etc.  I was wonding if something is possible.  You can link to a different panel of spry tabed another where both are include files?

  Here is an example of what I am asking:

  <! - what is main.inc.php which is an include file in index.php - >

  < div id = "TabbedPanels1" class = "TabbedPanels" >
  < ul class = "TabbedPanelsTabGroup" >
  < class li = "TabbedPanelsTab" tabindex = "0" > tab 1 < /li >
  < class li = "TabbedPanelsTab" tabindex = "0" > tab 2 < /li >
  < class li = "TabbedPanelsTab" tabindex = "0" > tab 3 < /li >
  < class li = "TabbedPanelsTab" tabindex = "0" > tab 4 < /li >
  < class li = "TabbedPanelsTab" tabindex = "0" > tab 5 < /li >
  < /ul >
  < div class = "TabbedPanelsContentGroup" >
  < div class = "TabbedPanelsContent" > <? PHP include(content_page_1.inc.php');? > < / div >
  < div class = "TabbedPanelsContent" > Content 2 < / div >
  < div class = "TabbedPanelsContent" > <? PHP include ('content_page_2.inc.php');? > < / div >
  < div class = "TabbedPanelsContent" > 4 content < / div >
  < div class = "TabbedPanelsContent" > <? PHP include(content_page_3.inc.php');? > < / div >
  < / div >
  < / div >

  So if main.inc.php is included in the index.php with content_page_1 and content_page_2 set up identically to main.inc.php...  You can have text in tab 4 of the content_page_1 will take you to tab 2 in content_page_2?

  If it is possible, does anyone know of a tutorial where I can learn how to do this?

  Thank you

  Your description is a little hard to follow, but it seems that you have with tab panels nested inside each other.

  The fact that you use include files makes no difference whatsoever. Include files are assembled on the server to create a web page. Therefore, the important thing is that your panels with tabs should have a unique ID. So, if you are nesting inside the TabbedPanels1 tabbed panels, the other panels should be TabbedPanels2, TabbedPanels3, etc.. Each set of tabs panels will also be initialized by the constructor Spry at the bottom of the parent page.

  The best way to implement is to create a simple page that does what you want, then skinning in the include files.

  Use the showPanel() method to open a different tab. For example, to create a link to open the third tab in TabbedPanels1, you create a link like this:

  Open panel 3
  

  The panels are numbered from 0, so 2 represents the third tab.

  I have not tested, but in theory, the following should open a specific tab in a nested set of tabbed panels:

  Open panel 4 inside the second tab
  

• HP dv7-1285dx Win7 BSOD errors

  My dv7-1285dx worked perfectly until a few weeks before, now he wants bsod on me at least every other day, sometimes twice a day or more. Various bsod error messages (STOP, IRQ, etc.). No indication of something. At one point last week, I had to use the restore application to return two registry saved back to just run - before that it would not boot.

  Error with nvlddmkm.sys are related to driver Nvidia but that only happened once. The last was something with a pilot and an IRQL is not an error (I'll follow upward with more detailed messages on this subject when they occur - sorry to be vague).

  I have run all equipment, disc tests and memory that are included in the suite of Win7 and run standalone versions similarly people to Acronis. Nothing seems abnormal. I hope that someone can read these dmp files and tell me if something stands out.

  Here is the link to the dmp files: http://www.mediafire.com/rsattler

  Thank you!

  Problem solved by replacing SoDIMM defective.

  Tests with Memtest86 + was very helpful in tracking down the memory defective barrette. I ran the test 4 times to determine which module was the absence of ata and eliminate any hardware problem module slot;

  1. 4 GB SoDIMM in slot 0
  2. 4 GB SoDIMM in slot 1
  3. 2 Gb SoDIMM in slot 0
  4. 2 Gb SoDIMM in slot 1

  I ran each test for ~ hour or two. I thought that I had a problem with the 4 GB SoDIMM but it turned out that the 2 Gb SoDIMM was the culprit with this testing methodology.

  Replaced the 2 GB SoDIMM and revived the test overnight (~ 10 hours) with two SODIMM modules in the machine and found no errors.

• BSOD error: IRQL GT ZERO at THE SERVICE of the SYSTEM

  Hello

  I have known many BSOD errors since last year. I tried to install a new copy of Windows, but the problem is still going.

  I read some responses who blame Bitdefender here, but I want to confirm by sending my dumpfiles before complaining to them, can you help me?

  I also read something related to this on Bitdefender forum http://forum.bitdefender.com/lofiversion/index.php/t48376.html, but I think that's exactly my problem. However, I installed the patch mentioned, but still have not tested its effectiveness... Could this hotfix (http://support.microsoft.com/kb/2664888) solve my problem?

  Here is the link to my dump files and msinfo32: http://www.4shared.com/rar/J0al3nomba/Minidump.html

  Thank you in advance.

  Renato Rigotto.

  Hello Renato.

  Thank you for the update on the issue and if problem continues try to follow these methods and check if it helps.

   

  Method 1:

   

  Select last good known in Windows Advanced options and check if that helps. To do this, restart the computer and press the F8 key for about four to five times. You will see the that last known good Configuration in the advanced options of windows. Please select last known good Configuration and then press enter.

   

   

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

   

   

  Method 2:

   

  You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.

  To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.

  See this link to start your computer in Advanced startup options.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

   

   

  Method 3:

  I suggest to follow the steps described in the article and check if this can help resolve the issue:

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Watch DRIVER BSOD error - STATE-FAILURE of CURRENT

  Hi, I have Windows 8 in HP Pavilion G6. Problem and a large number of errors are occurring in my laptop. I have refreshed, restored, reset and re-installed my Windows several times. Most of the problems occurred in the Bluetooth driver. Every time after that resetting or refreshing, Bluetooth my work for 2-3 days and then she also stops working. Also scanned my system with Norton internet security and Microsoft Windows Defender and Third-software No. third are installed in my system. Can someone help me with this problem? I downloaded the Minidump files on SkyDrive ( https://onedrive.live.com/redir?resid=22D347B8F78B247D%21167 ) caused due to the blue screen (BSOD error shows PILOT - STATE-FAILURE of CURRENT)

  Original title: blue screen of death in Windows 8

  9F error checking, {4, 12 c, fffffa8007b4e200, fffff8015e8a8780}

  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000004, the change in diet has expired waiting to synchronize with the Pnp
  subsystem.
  Arg2: 000000000000012c, the time-out in seconds.
  Arg3: fffffa8007b4e200, the thread that currently holds the lock of Pnp.
  Arg4: fffff8015e8a8780

  Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE.

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559329 (v = vs. 85) .aspx

  Resolution error blue screen in Windows.

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Uninstall Norton and turn on Windows Defender.

  Norton Removal Tool.

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  How to turn Windows Defender real-time Protection on or off in Windows 8 and 8.1.

  http://www.eightforums.com/tutorials/21967-Windows-Defender-protection-turn-off-Windows-8-a.html

  Uninstall and reinstall all the network drivers, including Bluetooth.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5189545#n617

  Note: Please confirm that the model in the above link is yours, before continuing.

  In addition,

  Please download a copy of your system information file. Click 'Start' , type "msinfo32" , click on "file" at the top of the page, select "Export" and enter a name for the file and click 'Save'. " Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.

• 8 windows multiple BSOD errors

  I had a HARD drive on my system to Windows 7. I wanted to install a SSD and move to Windows 8. I bought a Samsung EVO 250 GB Solid State Drive and have had any other problems with Windows 8. I can still update Windows without having a BSOD. Here is a list of the BSOD errors I received in 24 hours:

  PAGE_FAULT_IN_NONPAGED_AREA (Ntfs.sys) (fltmgr.sys)

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (dxgmms1.sys) (nvlddmkm.sys)

  System_service_exception (no data) (nvlddmkm.sys)

  Each parenthesis is a different phenomenon and there are many others. I don't know if it's my real SSD which is a failure or if the controller is not compatible with Windows 8, or if any other piece of hardware is not. I tried updating, deleting, adding updates, firmware and drivers and nothing is.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  You can learn more about BSOD here
  You will learn how to test your memory here 
  An effective question gets help more quick read how here

• TDMS C DLL error 6210 file is read only

  I try to use VS2015 to extract the data from the TDMS files, but I get this error when I try to open the file.

  6210

  DDC_CannotWriteToReadOnlyFile

  The file forwarded to the library is read only and cannot be changed.

  This happens in both DDC_OpenFile and DDC_OpenFileEx.

  ddcChk (DDC_OpenFileEx (false \\server\share\file_path, "TDMS", &file));))

  ddcChk (DDC_OpenFileEx (file_path, "TDMS", true, &file));))

  ddcChk (DDC_OpenFileEx (file_path, "TDMS", 0, &file));))

  ddcChk (DDC_OpenFileEx (file_path, "TDMS", 1, &file));))

  ddcChk (DDC_OpenFile (file_path, "TDMS", &file));))

  Is it possible to open only read files in VS or modify access VS before opening?

  The previous reviews were correct, using an old dll package does not work. For anyone who seeks the solution or how to configure tdms c dll in visual (VS 2015 here, Win32) studios:

  (1) take the new dll c since the above comment.

  (2) make a new empty win32 application project.

  (2) move the contents of \c_dll_tdm\TDM C DLL\dev\bin\32-bit in the working directory

  (3) move the \c_dll_tdm\TDM C DLL\dev\include file in the working directory

  (4) move the \c_dll_tdm\TDM C DLL\dev\lib file in the working directory

  (5) content move/copy the code \c_dll_tdm\TDM C DLL\samples\readFile.c in your working directory/source file. (The variable length must be replaced by an unsigned int so that it works with c ++).

  (5) follow these instuctions here to include your working directory (step 7 +). Add the working directory to your source file properties, but the addition of the library to the project properties

  Has it done for me I can successfully open the TDMS files. Thank you for the help and a link to the new DLL! I hope this can help some people who are also new to VS.

• BSOD errors, seeking help narrowing of the cause

  A quick overview - I've been "gifted" a site with about 250PCs to manage.  From the beginning of the contract (before my time), they have random BSOD errors and a few other programs that I am trying to sort now that I'm responsible for everything.

  The issue is that when the user to log in and begin to open programs, or sometimes during the initial connection, the system will blue screen and they reboot.  To restart the system in general will allow them to connect you and start working.  Other times it can happen 2 - 3 times before the system decides to cooperate.

  I started the collection of mini dumps memory.dmp and msinfo for systems after sorting what I could of BSOD Viewer (which only the States, it's a question about memory, but all searches are futile determine exactly what the cause.)

  Here is a link to the 2 systems, that I'm watching, hoping someone can do the same a fraction of light to help solve this problem.  Users have dealt the question, at least 1-2 years, I've been here since February and I'm about to start pulling my hair (what little I have excluded).

  Thank you all!

  fffff880 '066 d 3398 fffff880' 04c 48130 * ERROR: Module load completed but symbols could not be loaded for mfeaack.sys
  mfeaack + 0 x 48130

  fffff880 '066cde68 fffff880' 01151c4a * ERROR: symbol file could not be found.  Defaulted to export symbols for mfehidk.sys-
  mfehidk + 0x68c4a

  McAfee and graphics card intel are mentioned in the two systems. I suggest you uninstall mcafee and running the tool of cleaning, found in the link below.

  Recommended methods of removal of Windows: Windows 7

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Download the tool Development http://us.McAfee.com/apps/SupportTools/MCPR/MCPR.asp

  If you continue to have problems after you remove Mcafee, uninstall and reinstall your driver intel graphics.

• BSoD - error DRIVER_OVERRUN_STACK_BUFFER and chart use disc in the Task Manager showing constant 100% graphic

  All of sudden it began to show "BSoD - error DRIVER_OVERRUN_STACK_BUFFER" and while the system is turned on, it displays "chart use disc in the Manager of tasks showing constant 100% graphic.

  Friends, this is

  IT HAS THE FILE INFO MINIDUMP AND ZIPPED SYSTEM.

  Please go through it and help me friends :(

  SkyDrive link: https://onedrive.live.com/redir?resid=3CFADFC6344DFA0A%21263

  It worked, thanks!

  All attached files of the DMP are the verification of bug DRIVER_OVERRAN_STACK_BUFFER (F7) .

  This indicates that a driver has saturated a stack-based buffer.

  A driver invaded a buffer based on the stack (or a local variable) in a way that would have replaced the function's return address and jumped to an arbitrary address when the function returned.

  2: kd > k
  Call child-SP RetAddr site
  fffff880 '192edc58 fffff880' 03da0f6e nt! KeBugCheckEx
  fffff880 '192edc60 00000000' WinFLAdrv + 0x3f6e 000000f7
  fffff880 '192edc68 00fff880' 6d2ebda0 0xf7
  fffff880 '192edc70 0000f880' 03da3019 0x00fff880'6d2ebda0
  fffff880 '192edc78 ffff077f' fc25cfe6 0x0000f880'03da3019
  fffff880 ' 192edc80 00000000 00000000 of ' 0xffff077f ' fc25cfe6

  WinFLAdrv.sys invaded a buffer based on the stack, so called bug control. It is a pilot

  associated with the Service of NewSoftwares.net WinFLAdrv.sys Application. Uninstall ASAP!

  Kind regards

  Patrick