BSOD error - Win 7 - Stop error/Bug Check Information

Similar Questions

• BSOD problem error bug check code is 0xd1.

  Original title: BSOD issue.

  Hello

  I'm having consistent BSOD issues and have not recently installed new hardware other than a new keyboard. Might help you to check what the problem is please?

  minidmp files have been downloaded below

  https://onedrive.live.com/redir?RESID=3F8A3757B75723FF! 275 & authkey =! AJLWy31mgYj0vXE&ithint=folder%2c.rar

  Thank you for your help.

  Nick

  These accidents were caused by the cmudaxp.sys (description of the driver below.)  The bug check code is 0xd1.

  The debugging session: 20:46:57.022 Sun may 4, 2014 (UTC - 04:00)
  System Uptime: 0 days 1:17:13.657
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .................................
  Loading user symbols
  Loading unloaded module list
  ..........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck D1, {fffff86c052b3410, 2, 0, fffff88005298e8b}

  Failed to load image \SystemRoot\system32\drivers\cmudaxp.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for cmudaxp.sys
  ERROR: Module load completed but symbols can be loaded for cmudaxp.sys
  Probably caused by: cmudaxp.sys (cmudaxp + 1c0e8b)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If the kernel debugger is available, get a stack backtrace.
  Arguments:
  Arg1: fffff86c052b3410, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
  Arg4: fffff88005298e8b, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff802b1bc6168
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  fffff86c052b3410

  CURRENT_IRQL: 2

  FAULTING_IP:
  cmudaxp + 1c0e8b
  fffff880'05298e8b ff9080000000 call qword ptr [rax + 80 h]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XD1

  Nom_processus: chrome.exe

  TRAP_FRAME: fffff802b0d7e700-(.trap 0xfffff802b0d7e700)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff86c052b3390 rbx = 0000000000000000 rcx = fffffa8003c103e0
  RDX = fffffa8003c43130 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88005298e8b rsp = fffff802b0d7e890 rbp = 0000000000000080
  R8 = 0000000000000040 r9 = fffffa8003c5eaa0 r10 = fffff880052b59f0
  R11 = fffff802b0d7e948 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  cmudaxp + 0x1c0e8b:
  fffff880 "05298e8b ff9080000000 call qword ptr [rax + 80 h] ds:3500:fffff86c" 052 b 3410 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff802b18ea369 to fffff802b18eb040

  STACK_TEXT:
  fffff802 'b0d7e5b8 fffff802' b18ea369: fffff86c' 00000000 0000000 a ' 052b 3410 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff802 'b0d7e5c0 fffff802' b18e8be0: 00000000 00000000' fffffa80 '03c103e0 00000000' fffff802 00000000' b0d7e700: nt! KiBugCheckDispatch + 0 x 69
  fffff802 'b0d7e700 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0 x 260

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  cmudaxp + 1c0e8b
  fffff880'05298e8b ff9080000000 call qword ptr [rax + 80 h]

  SYMBOL_NAME: cmudaxp + 1c0e8b

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: cmudaxp

  Nom_image: cmudaxp.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51669462

  FAILURE_BUCKET_ID: X64_0xD1_cmudaxp + 1c0e8b

  BUCKET_ID: X64_0xD1_cmudaxp + 1c0e8b

  Follow-up: MachineOwner
  ---------

  0: kd > lmvm cmudaxp
  start end module name
  05406000 fffff880 '050 d 8000 fffff880' cmudaxp T (no symbol)
  Loaded symbol image file: cmudaxp.sys
  Image path: \SystemRoot\system32\drivers\cmudaxp.sys
  Image name: cmudaxp.sys
  Timestamp: Sat Apr 11 06:45:54 2013 (51669462)
  CheckSum: 002A485F
  ImageSize: 0032E000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Driver Description: C-Media Audio Interface Driver (WDM) C-Media
   Interface driver Audio ASUS Xonar DG
  HTO CLARO Audio Interface Driver

  Driver update site: http://www.cmedia.com.tw/EN/DownloadCenter_Detail.aspx?pserno=0&dtype=ALL
  http://support.ASUS.com/download/download.aspx
  http://www.htomega.com/downloads.html

  Uninstall and reinstall after a repair KB2862330, noted below.

  ================================================================================================
  Please delete Hotspot shield.
  ERROR: Module load completed but symbols can be loaded for hssdrv6.sys
  WARNING: Unable to verify timestamp for taphss6.sys
  ERROR: Module load completed but symbols can be loaded for taphss6.sys

  Driver Description: Hotspot shield
  Cause possible BSOD seen in mid-2012

  Driver update website: http://hotspotshield.com/
  ================================================================================================
  Please remove immediately update utility. This software is problematic and may corrupt your system

  Unloaded modules:
  fffff880 ' 17747000 fffff880' 1774f000 TuneUpUtilities
  Timestamp: unavailable (00000000)
  Checksum: 00000000
  ImageSize: 00008000
  ================================================================

  Check updates systems installed to KB2862330. Is it installed?

  This security update was initially released on 8 October 2013. The security update was re-released on January 14, 2014, for computers that are running Windows 7 Service Pack 1 (SP1) or Windows Server 2008 R2 SP1. The reissue resolves an issue in which one of the pilots of the stack kernel USB 2.0 is not updated in some specific computer configurations.

  http://support.Microsoft.com/kb/2862330/en-us

  Note: compare the versions of your file in the link above. I suspect you've found BCCode 0xD1 due to improperly installed or missing update.

• BSOD on win server 2008 r2 std PAGE_FAULT_IN_NO_PAGED_AREA bug check code 0 x 50

  Hi all, I have this problem:

  My server gets a BSOD evrytime I try to log in, I can only log in safe mode.

  I've seen so many pages saying that this error is caused by a hardware failure, but I have not intall anything new on this, I guess an update caused the problem, I already ran the unsuccessful memory test, also had executed tools hard disk without finding anything to help solve the problem I have also updated the BIOS without success, I also uninstalled the latest updates but the problem persists. Can someone help me?

  • Server: DELL PowerEdge 310
  • OS: Windows 2008 R2
  • bug control chain: PAGE_FAULT_IN_NONPAGED_AREA
  • bug check code: 0 x 00000050
  • caused by the address: ntoskrnl.exe + 73c00

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: ntoskrnl.exe

  PAGE_FAULT_IN_NONPAGED_AREA

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0 X 00000050 (0XFFFFF8A0103AF000, 0 X 0000000000000000, 0XFFFFF8000235FDFF,)
  0 x 0000000000000000)

  Ntoskrnl.exe - address 0xfffff800020c9c00 base at 0xfffff80002056000 DateStamp
  0x5684191c

  Thank you very much for your help!

  Oscar

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Computer restart and display BSoD error constantly

  My computer restarts and gives me a blue screen error message.

  Minidump:
  https://SkyDrive.live.com/redir?RESID=27EED93B82BAB133! 120 & authkey =! AFPe1f7a4LP64IA
  
  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• Windows BSOD error 8

  WHEA_UNCORRECTABLE_ERROR (124)
  A fatal hardware error has occurred. Parameter 1 identifies the type of error
  source that reported the error. Parameter 2 holds the address of the
  WHEA_ERROR_RECORD structure that describes the error conditon.
  Arguments:
  Arg1: 0000000000000000, Machine Check Exception
  Arg2: fffffa80059cb028, Address of the WHEA_ERROR_RECORD structure.
  Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
  Arg4: 0000000000010019, Low order 32-bits of the MCi_STATUS value.
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  BUGCHECK_STR:  0x124_GenuineIntel
  
  CUSTOMER_CRASH_COUNT:  1
  
  DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
  
  PROCESS_NAME:  chrome.exe
  
  CURRENT_IRQL:  f
  
  STACK_TEXT:
  fffff880`0148b868 fffff802`31e3e965 : 00000000`00000124 00000000`00000000 fffffa80`059cb028 00000000`b2000000 : nt!KeBugCheckEx
  fffff880`0148b870 fffff802`31fddeb3 : 00000000`00000001 fffffa80`042a7850 00000000`00000000 fffffa80`059cb028 : hal!HalBugCheckSystem+0xf9
  fffff880`0148b8b0 fffff802`31e3e703 : 00000000`00000728 00000000`00000003 fffff880`0148ba10 fffffa80`042a7850 : nt!WheaReportHwError+0x253
  fffff880`0148b910 fffff802`31e3e020 : 00000000`00000010 fffffa80`042a7850 fffff880`0148bac8 fffffa80`042a7850 : hal!HalpMcaReportError+0x53
  fffff880`0148ba70 fffff802`31e3df1b : fffffa80`0435fd50 00000000`00000001 00000000`00000003 00000000`00000000 : hal!HalpMceHandlerCore+0xd4
  fffff880`0148bac0 fffff802`31e3dd78 : 00000000`00000004 00000000`00000001 00000000`00000000 00000000`00000000 : hal!HalpMceHandler+0xe3
  fffff880`0148bb00 fffff802`31e3ef0f : fffffa80`0435fd50 fffff880`0148bd30 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0xd4
  fffff880`0148bb30 fffff802`31ed577b : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
  fffff880`0148bb60 fffff802`31ed552e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x7b
  fffff880`0148bca0 00000000`647109db : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x16e
  00000000`0727ede0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x647109db
  
  STACK_COMMAND:  kb
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: GenuineIntel
  
  IMAGE_NAME:  GenuineIntel
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  0
  
  FAILURE_BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB
  
  BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_TLB
  
  Followup: MachineOwner
  

  SR

  This is called a BCC124 and is linked to the material.  Since "genuine Intel" is referenced in your, I would run a cpu stress test.

  

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• Watch DRIVER BSOD error - STATE-FAILURE of CURRENT

  Hi, I have Windows 8 in HP Pavilion G6. Problem and a large number of errors are occurring in my laptop. I have refreshed, restored, reset and re-installed my Windows several times. Most of the problems occurred in the Bluetooth driver. Every time after that resetting or refreshing, Bluetooth my work for 2-3 days and then she also stops working. Also scanned my system with Norton internet security and Microsoft Windows Defender and Third-software No. third are installed in my system. Can someone help me with this problem? I downloaded the Minidump files on SkyDrive ( https://onedrive.live.com/redir?resid=22D347B8F78B247D%21167 ) caused due to the blue screen (BSOD error shows PILOT - STATE-FAILURE of CURRENT)

  Original title: blue screen of death in Windows 8

  9F error checking, {4, 12 c, fffffa8007b4e200, fffff8015e8a8780}

  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000004, the change in diet has expired waiting to synchronize with the Pnp
  subsystem.
  Arg2: 000000000000012c, the time-out in seconds.
  Arg3: fffffa8007b4e200, the thread that currently holds the lock of Pnp.
  Arg4: fffff8015e8a8780

  Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE.

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559329 (v = vs. 85) .aspx

  Resolution error blue screen in Windows.

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Uninstall Norton and turn on Windows Defender.

  Norton Removal Tool.

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  How to turn Windows Defender real-time Protection on or off in Windows 8 and 8.1.

  http://www.eightforums.com/tutorials/21967-Windows-Defender-protection-turn-off-Windows-8-a.html

  Uninstall and reinstall all the network drivers, including Bluetooth.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5189545#n617

  Note: Please confirm that the model in the above link is yours, before continuing.

  In addition,

  Please download a copy of your system information file. Click 'Start' , type "msinfo32" , click on "file" at the top of the page, select "Export" and enter a name for the file and click 'Save'. " Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.

• Satellite Pro A100 - NMI memory parity error parity check

  Sometimes I get this BSOD error during 2 months.
  Hardware malfunction call your provider for support NMI: Parity Check / Memory Parity Error * the system stopped *.

  It can occur if the laptop is asleep, or even refreshing a screen save or Stand-By condition.
  Model PSAAPE - 00s00KEN 2 GB installed. I checked that the memory is installed correctly. It's a laptop very clean with no dust clutter things. Aside from the Ram "goes wrong" and developing a fault, can anyone suggest another cause? It doesn't seem to be an obvious solution to this problem on a forum I've seen so far. Maybe it's my RAM that fails (but it seems to do it when he is not be underlined!) It could be the video drivers... who knows? I hope somebody.

  Hello!

  In your case, I would check the RAM, I think that's the problem.

  You can do this with Memtest86:
  http://Memtest86.com/
  Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
  It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

  Good bye

• "Windows 7 x 64 BSOD error" BCCode: 3B.

  Hey guys. I just started using this new laptop and did a few mines gold intensive CPU with it.

  My laptop in general is idling at 140 degrees F but it seems to hold up. These blue screens seem to happen at random times while botting, usually 6 to 12 hours in it.

  I recently installed Windows 7 Ultimate on this disc have previously windows 8. This laptop really doesn't have a lot of programs too, I just have the basics and use it for heavy agriculture.

  BSOD error

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960001D07AB
  BCP3: FFFFF8800BFDB1B0
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0

  Product: 256_1

  Thanks for reading

  First step is to upgrade to Service Pack 1.  In itself, that can solve the problem.  If she does not see below

  Service pack 1 update.
  
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.

  In other words STOP! If you don't know what it means that you're probably not  

  
  

  
  

  1-Driver Verifier (for full instructions, see our wiki here)

  
  2-Memtest. (You can learn more about running memtest here)

• BSOD error: IRQL GT ZERO at THE SERVICE of the SYSTEM

  Hello

  I have known many BSOD errors since last year. I tried to install a new copy of Windows, but the problem is still going.

  I read some responses who blame Bitdefender here, but I want to confirm by sending my dumpfiles before complaining to them, can you help me?

  I also read something related to this on Bitdefender forum http://forum.bitdefender.com/lofiversion/index.php/t48376.html, but I think that's exactly my problem. However, I installed the patch mentioned, but still have not tested its effectiveness... Could this hotfix (http://support.microsoft.com/kb/2664888) solve my problem?

  Here is the link to my dump files and msinfo32: http://www.4shared.com/rar/J0al3nomba/Minidump.html

  Thank you in advance.

  Renato Rigotto.

  Hello Renato.

  Thank you for the update on the issue and if problem continues try to follow these methods and check if it helps.

   

  Method 1:

   

  Select last good known in Windows Advanced options and check if that helps. To do this, restart the computer and press the F8 key for about four to five times. You will see the that last known good Configuration in the advanced options of windows. Please select last known good Configuration and then press enter.

   

   

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

   

   

  Method 2:

   

  You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.

  To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.

  See this link to start your computer in Advanced startup options.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

   

   

  Method 3:

  I suggest to follow the steps described in the article and check if this can help resolve the issue:

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• BSOD error - included file link

  Hello, I never tried to fix a BSoD for me so hoping that I can get through it.

  Here is the link to my Minidump and MSinfo32 files - https://onedrive.live.com/redir?resid=903F8B851E866942! 5988 & authkey =! AH-5Enin745phQ8 & ithint = the file % 2czip

  I use a desktop with Windows 7 Asus computer. PC configuration very standard which belongs to non-technical brother and I use it for the basic work of small business 2 days a week.  The only changes that I made recently are to renew my Kaspersky Internet Security license.

  For the past 2 weeks I got a BSoD error once per day. There is no consistency in what I'm doing at the time of the error, time of day etc that I've been able to think.

  Any help is appreciated with gratitude. If there is more information, I can provide to help determine the problem, please let me know.

  Fiona

  Fiona

  These accidents were related to the corruption of memory (probably caused by Kaspersky).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & win 7 (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• BSOD error "" BCCode: 3B ""

  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF9600012F2EB
  BCP3: FFFFF880069073A0
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  System
  Processor: amd athlon 64 x 2 4400 +
  GPU: nvidia 9400gt
  RAM: ddr2 samsung

  You have done, thank you!

  All attached files of the DMP are bug check SYSTEM_SERVICE_EXCEPTION (3B).

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  If we take a look at the call stack:
  
  1: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '07ef7ad8 fffff800' 028d5be9: 00000000' 0000003b 00000000' c0000005 fffff960 '0014f2eb fffff880' 07ef83a0: nt! KeBugCheckEx
  "fffff880 '07ef7ae0 fffff800' 028d553c: 00000000 ' 00000001 fffff880 ' 07ef7d50 fffffa80 '03a512d0 fffff880' 0175cd1e: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '07ef7c20 fffff800' 02901f6d: fffff960 ' 00306a 04 fffff960 ' 002 d 1644 fffff960' 00020000 fffff880 ' 07ef8b48: nt! KiSystemServiceHandler + 0x7c
  fffff880'07ef7c60 fffff800'02900 d 45: fffff800'02a1d788 fffff880 '07ef7cd8 fffff880' 07ef8b48 fffff800'02856000: nt! RtlpExecuteHandlerForException + 0xd
  "fffff880 '07ef7c90 fffff800' 02911dc1: fffff880 '07ef8b48 fffff880' 07ef83a0 fffff880 ' fffff900 00000000 ' c0630ca0: nt! RtlDispatchException + 0 x 415
  fffff880 '07ef8370 fffff800' 028d5cc2: fffff880'07ef8b48 fffff900 'c0625320 fffff880' 07ef8bf0 00000000' 00000000: nt! KiDispatchException + 0 x 135
  fffff880 '07ef8a10 fffff800' 028d483a: fffff900 00000000'00000001 00000000'00000008 00000000'00000000 ' c0625320: nt! KiExceptionDispatch + 0xc2
  fffff880 '07ef8bf0 fffff960' 0014f2eb: fffff900 ' c0625320 fffff900 'c020cd38 fffff900' c1ef5630 fffff960 ' 000e4712: nt! KiPageFault + 0x23a (TrapFrame @ fffff880'07ef8bf0)
  "" fffff880 '07ef8d80 fffff960' 0014f690: 00000000 ' 00000000 fffff900 ' c0630ca0 00000000 ' 1201088 d fffff900 ' c0625320: win32k! xxxSendMenuDrawItemMessage + 0 x 253
  fffff880 '07ef8e80 fffff960' 00150ca 8: fffff900'c0630ca0 00000000'00000000 00000000'00000000 00000000'00000000: win32k! xxxDrawMenuItem + 0x1a8
  fffff880 '07ef8f40 fffff960' 00151b2d: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: win32k! xxxMenuDraw + 0 x 294
  fffff880 '07ef8ff0 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: win32k! xxxPaintMenuBar + 0xf1

  ^^ We have different routines before win32k.sys Windows through its error handling, etc. for the bug control itself.
  
  If we run a ln on the 2nd parameter of the verification of bug:

  1: kd > fffff9600014f2eb ln
  (fffff960'0014f098)   win32k! xxxSendMenuDrawItemMessage + 0 x 253 |  (fffff960'0014f34c) win32k! xxxSendUAHMenuMessage

  ^^ The exception occurred in win32k! xxxSendMenuDrawItemMessage + 0 x 253.

  -Nom_processus: Project64.exe

  All accidents occurred when PJ64 was running. What version are you using (the most recent is 2.x.x etc... AS FAR AS I KNOW). If you are, try 1.6 instead, or if you're running 1.6, try 2.x.x (later). In addition, it is perhaps a video driver issue.

  ------------------

  1 make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2. don't use PJ64 for awhile and see if the crashes stop. If they do, PJ64 is the question and you will need to understand why (plugin possible licensing, etc.).

  Kind regards

  Patrick

• Equium L20-198: error 0271 check date and time settings.

  My apologies if this appears twice, I tried to change and I somehow lost my thread.

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  > Is it possible that the CMOS battery charge the main battery and this is my problem?
  Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
  It s not I known if battery CMOS takes the power of the main battery
  Usually the CMOS battery should always charge in work and when the laptop is plugged in
  So, theoretically the main battery has no influence on the CMOS battery.

  I think it might be a mobo problem, I think this could be a reason for it

  By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

• L20-198 error 0271 check date and time settings

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

• BSOD errors on portable satellite

  Equium Laptop crash with BSOD errors.

  Tried to install from the DVD of Vista, but I receive the random BSOD messages
  who will stop the installation. They are:-

  IRQL NOT LESS OR EQUAL
  0x0000AC88, 0x0000001B, 0 x 0, 00000001 00000005, 0x895080BF

  and

  0xc0000005, 0x8ACF2060, 0x87DD4B5C, 0 x 00000000, 0 x 00000000
  Win2K.sys

  Can you please choose the wire where you want to continue the discussion on the BSOD computer satellite phone?
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=159338

• HP dv7-1285dx Win7 BSOD errors

  My dv7-1285dx worked perfectly until a few weeks before, now he wants bsod on me at least every other day, sometimes twice a day or more. Various bsod error messages (STOP, IRQ, etc.). No indication of something. At one point last week, I had to use the restore application to return two registry saved back to just run - before that it would not boot.

  Error with nvlddmkm.sys are related to driver Nvidia but that only happened once. The last was something with a pilot and an IRQL is not an error (I'll follow upward with more detailed messages on this subject when they occur - sorry to be vague).

  I have run all equipment, disc tests and memory that are included in the suite of Win7 and run standalone versions similarly people to Acronis. Nothing seems abnormal. I hope that someone can read these dmp files and tell me if something stands out.

  Here is the link to the dmp files: http://www.mediafire.com/rsattler

  Thank you!

  Problem solved by replacing SoDIMM defective.

  Tests with Memtest86 + was very helpful in tracking down the memory defective barrette. I ran the test 4 times to determine which module was the absence of ata and eliminate any hardware problem module slot;

  1. 4 GB SoDIMM in slot 0
  2. 4 GB SoDIMM in slot 1
  3. 2 Gb SoDIMM in slot 0
  4. 2 Gb SoDIMM in slot 1

  I ran each test for ~ hour or two. I thought that I had a problem with the 4 GB SoDIMM but it turned out that the 2 Gb SoDIMM was the culprit with this testing methodology.

  Replaced the 2 GB SoDIMM and revived the test overnight (~ 10 hours) with two SODIMM modules in the machine and found no errors.