BSOD install Windows 8

Similar Questions

• Portege M200 - problem installing Windows Xp - BSOD

  I recently got 2 computers Portege M200 laptops, but previous users had wiped the hard drive.
  So now im trying to install windows Xp via cd-rom drives externel accompanying.
  But when its load to the top of the windows Xp cd it gives me a BSOD somewhere near the end of loading the CD (it always stops on 'Setup starts windows').

  Now, I thought that this could be a hard drive problem, so I have a drive hard "nine", but this still does not work (this problem exists on two laptops).

  Now im wondering if theres some sort of special installation process or something of the sort for the M200?

  I hope someone can help me with my problem.
  Thank you... DG

  Hi mate,

  What version of Windows XP you are trying to install? Windows XP Professional or Tablet edition? You have the available recovery? If Yes, then you should use it :)

  If not, you should check if there could be maybe something with the Tablet thing. It s just a hint, so I'm sorry that I Don t have a real good solution...

  Good luck

• Satellite L510 - BSOD when you try to install Windows XP SP2

  I have a Satellite L510 purcahsed with Vista home premium, but when I try to install XP Professional it screens just as it tries to start windows and blue right after the installation of the part of pilots to the beginin.

  Anyone has an idea why this would happen?

  Thank you very much

  Hello

  I m a bit confused now... When you get exactly the BSOD? After complete installation of Windows or after that?
  By the way: BSOD code what you get exactly?

  I often read on codes of BSOD when installing XP so I guess that you didn't use the correct driver SATA. You need the Storage Manager to properly install Windows and you can find this driver on the Toshiba site.

  By the way: you can also use the forum search to find similar topics.

• laptop HP 2000: friends, I have laptop hp 2000. When I go to install windows xp on it then BSOD takes place.

  Friends, I have 2000 hp laptop. When I go to install windows xp on it then BSOD takes place.
  I have the motherboard intel with HM70.
  I have windows xp sp3.
  Please, help me to install xp on it.
  I hope that you will all help me...

  Hello:

  You must integrate the drivers for XP sata controller to be installed.

  I zipped and tied the drivers you need below.

  Unpack the drivers that I have attached to their record.

  Then, read the section Intel the link below and the downloadable document that explains how to integrate the drivers that I've fixed it so that XP will be installed.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• Repeatedly to get BSOD on Windows 8, even after the new re - installed.

  Hello

  I installed a new copy of Win8 about 3.5 months ago, and last week I started having these BSOD errors (possibly after a windows update):

  1. NTFS FILES for error SYSTEM
  2. IRQL NOT LESS OR EQUAL
  3. LIST OF CORRUPT NFP
  4. SYSTEM SERVICE EXCEPTION

  Everytime I restarted my computer, I had another of these errors. So I decided to update the installation of Windows 8, and because the update remained stuck on 39% more day I left it. At this point, it was simply impossible to connect to windows whenever I tried because the BSOD would leap upward before that windows won't even load.

  Attempts at recovery:

  1. Fully formatted HARD drive, installed Windows 8, but it was just a matter of time until that the BSOD was back again after a windows update. I suspect that these errors are all drivers related issues, but how can we know which driver is causing the conflict exactly? What can I use to read the Dump files easily?
  2. Research showed it could be things like adapters wireless usb etc, and I noticed that my usb adapter list win8 as a compatible platform. I went to the store and bought a usb adapter which is 8 compatible windows. I also bought a HARD disk that is compatible win8 just to be sure. I tried another new facility at the new disk and he succeeded. I installed the driver of usb wireless network card compatible win8 since the accompanying CD and the BSOD was back.
  3. Completely re-formatted the HARD drive tries again, another installation, but once it has reached "Installing updates" IRQL LESS or DIFFERENT error popped up again. I don't think it actually installed updates because the computer was not connected to the network somehow, because the usb adapter is no longer connected to the computer.
  4. I tried to install another after a quick format once again, and when she reaches the "Install updates" step the BSOD came back (no cable Ethernet or a wireless connection to internet).

  Issues related to the:

  1. A full format really helps the situation?
  2. Is it possible to have driver problems during the installation of windows on a hard drive completely wiped out?
  3. Why it would fail to step "Install updates" even if there is no connection to the network, so no way to download the updates?
  4. Is it possible that the other components of my machine cause conflicts?
  5. If not, how can I solve this problem? What are some other things to try?

  Here are the specs of my machine:

  • Graphics, GTX 670 1 800 MB of memory.
  • 16 GB of RAM DDR3 Corsair Vengeance.
  • Processor 3.5 GHz Intel core i7 - 3770 k

  Thank you

  Hello

  It turns out one of my RAM chips was defective.

  I ran a diagnosis of memory, which has detected hardware problems, then I ran my computer with each piece at a time to determine the defective one.

  My computer works fine now. I think that everything else is fine as well.

  I thank very you much for all the help. I'll reach out again if something else happens.

  Edmar - G.

• Satellite Pro U400 - 15 p - BSOD if I install Windows XP

  Hello

  I bought a Toshiba Satellite Pro U400 - 15 p. Unfortunately I can't install Windows XP Home Edition, because the error pops up on the beginning of the installation (nr of error: STOP: 0x0000007B (0xC0000034, 0x00000000, 0x00000000).) I couldn't install Linux as well.
  Is this normal?

  What should I do before installing Windows? Should I first all the drivers? And how to install without Windows?
  Maybe it is some property damage?

  PS. I'm not very good with computers, so I need simple explanation (step by step - how to install Windows). ;)

  Use NLite software and include files
  iaAhci.cat
  iaAHCI.inf
  iastor.cat
  iaStor.inf
  IaStor.sys

  on the Windows XP disc
  Then take this new drive and use it for booting and Installing Win XP.

• Satellite A100 (PSAANE) - BSOD if I install Windows XP

  I am the owner of the laptop listed in the title (* Toshiba Satellite A100 PSAANE). *
  Inittialy that the laptop was sold with Win Vista preinstaled as operated system.
  My intention is to install Win XP on this computer. I am an experienced user in installing XP on computers but not on the laptop, and this is the first time when I tried.

  I have a big problem:

  immediately after the restart on the bootable CD with XP SP1, I received the following message on a blue screen:

  + "A problem has been detected and Windows has shut down to prevent damage to your computer. +

  + If this is the first time you've seen this Stop error screen, restart your computer. If this screen appeears again, follow these steps: +.

  + Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer to update the driver. Try changing video cards. +

  + Check with your hardware vendor for updates to the bios. Disable the Bios memory options such as implementing caching or shading. If you need to use the Safe Mode to remove or disabled components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe mode. +
  + Technical information +.
  + * STOP: 0X0000007E (0XC0000005, 0XF76450BF, 0XF7A91208, 0XF7A90F08) +.
  + * pci.sys - address F76450BF base at F763E000, DAteStamp 3b7d855c ' + '.

  You should know that I have the latest version of the bios update on this machine.
  WHAT CAN I DO? ANY HELP?

  Hello

  As far as I know the Satellite A100 is equipped with a SATA HDD and so you need the SATA drivers before installing Windows XP.

  It is a known issue and you will find hundreds of discussions here in the forum about this Yes, you can take a few minutes to use the forum search.

  On your laptop, you need the Storage Manager you can download from the Toshiba site. Then, you can create a new installation with nLite disk or you are using an external floppy drive. I think that this document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  But don t forget the Windows XP disk must contain at least SP2!

  Welcome them

• BSOD occurs when I try to install Windows XP Home on the Satellite A100-VA5

  I got a brand new Toshiba A100 - VA5 Notebook, here in Toronto in the Canada.

  Laptop came with Vista. I don't have a problem with vista, but there are some software that I need for my work and they do not work on Vista.
  I decided to install Windows on a partition, but when I run the XP installation CD, it errors on a blue screen with the error below

  The Blue error screen I get when installing WXP stop is

  Stop: 0X0000007E (0XC0000005, 0XF76450BF, 0XF7A91208, 0XF7A90F080)

  I searched on Internet forums, some people have had similar problems on a computer no-Toshiba with XP and the problem was caused because the XP installation CD does not have S - ATA Raid Controller drivers? Which after pressing F6 at the start-up of the plant, solved the problem.

  However, I was unable to find the drivers for the controller S - ATA Raid on Toshiba support site, and I don't know where to find them. Someone knows something like that and it is due to S - ATA Raid Controller drivers? And if the answer is Yes, where can I find them since?

  Thank you

  Omer

  Hello

  Everything you need you can find on Toshiba Canada support page http://209.167.114.38/support/Download/ln_byModel.asp#
  When you choose your part number do not forget, you use PSAANC-VA505C number (check also on the laptop label in the lower corner of your laptop).

  Now, back to the blue screen. As far as I know for this model of laptop is not necessary to install the S - ATA Raid Controller at the beginning of the procedure of the facilities. For laptops with RAID driver this driver is available on the download page. This driver is not available for your laptop model.

  You try to install latest Windows XP Home with Service Pack 2?

• Qosmio G30-176: BSOD when installing Windows Vista Edition full

  I have my wisdom(??!!) I bought a Toshiba Qosmio g30-176 with preinstalled Windows XP MCE 2005. The plan was to install Windows Vista Ultimate on drive D: (do the dual machine boot XP & Vista). I've updated the BIOS today on the Toshiba site and I ran Windows Vista Upgrade Advisor.

  I started the upgrade of Vista (custom) and installed the Toshiba RAID drive C: Qosmio (driver C:\toolscd\raid) driver. Installation starts copying the files from the Vista installation disc. This completes OK.

  The upgrade then continues to "unpack"(?) ". files - part way through this restarting of the o/s.
  To restart the Qosmio stop with the blue screen of death and the "SESSION3_INITIALIZATION_FAILED" message "STOP: 0x0000006f (0xC000009D, 0x00000000, 0x00000000, 0x00000000).

  What is the error?
  What should I do to fix it?
  Thanks - Alan E

  Hello

  You perform an upgrade or a new installation of OS?
  If you have tired to upgrade XP to Vista you must first remove some utilities Toshiba XP because some XP tools are not compatible with the new Vista operating system

• Qosmio X 300 BSOD after installing Windows

  Hello

  I have a laptop x 300-11 t Qosmio.
  I tried to install Windows XP by "slipstreaming" good hard drive SATA/RAID drivers and others on the installation CD. Windows through the installation process, but when it restarts for the first time, the sign of Windows load for about 1 second and then gives me a blue error screen (HDD error)

  STOP: 0X0000007B (0XBACCF524, 0XC0000034, 0X000000 0X000000)

  The BIOS also doesn t allow me to change the compatibility thing AHCI mode is
  Don t know what else to do?
  I need to integrate the SATA/RAID driver specific to the installation CD?
  Boot sector virus?
  Can it really be installed?

  Help, please

  I'm pretty sure that you have installed the wrong driver SATA/RAID.

  On the Toshiba site are no XP drivers available so that you download on Intel: [www.intel.com]
  You need the Intel Matrix Storage Manager.

  The Microsoft Knowledge Base explains to this might be a bad driver:
  http://support.Microsoft.com/kb/324103

• Re: Install Windows XP x 64 on L500-1UU

  Hi all.

  I had problem with installing Windows XP on L500-1UU. After checking hardware Windows settings are BSOD. I read the need sata drivers to install in pack Windows installation using nlite. Please tell me where I can get this driver.

  Wait for the answer.
  Best regards.

  Hello

  Go to the Bios. put, Comaptible, in Sata controller, press F10 - save and exit. Then, start the Windows installation, no BSOD occurred. After installation, you can install the Storage Manager, reboot and reseating, AHCI, the Sata controller.

  But before the installation, go to the driver page to check if all the drivers are available:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Post edited by: Jeka-HE

• Pavilion model 11-n001sa: installing Windows HP pro on the HP Pavilion model No. 11 - n001sa

  I replaced the original hard disk, it was windows 10 installed.

  This small laptop is idea for my Renault Clip software, so we need to install Windows XP pro.

  I tried different setting in the bios, XP is listed, theres so no reason for it not install it!

  Using windows XP pro sp 2 & 3 installation disc, but keep the blue screen dreaded towards the end of the installation.

  Come on HP, I need your advice please.

  Hello:

  There is a very good reason that XP does not install.

  Intel did not provide any sata ahci drivers for the chipset that has your laptop.

  That's why you got the BSOD.  XP cannot find the hard drive.

  The latest processors from Intel-based notebook chipsets which had support for XP have laptops with the 7 Series chipsets.

  Not to mention the fact that you wouldn't find any graphic or wireless drivers for XP even if you can get it (that you can't) install.

• Satellite M305-S4907 - cannot install Windows XP

  Hello

  I want to get help with my Toshiba problem. I tried to install Windows XP Professional on my computer Toshiba Satellite M305-S4907. When I use my Windows XP Pro CD to start Windows Setup on all load as it should. Then, I get a bluescreen error message saying:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000"

  This Toshiba came with Windows Vista x 64 already installed.

  Please help me. I'm more comfortable using Windows XP Professional, and that's why I want to change my OPS.

  Thank you

  Wasabi24

  Hello

  Please see the Knowledge Base Microsoft for all BSOD codes:
  http://support.Microsoft.com/kb/324103

  In any case, this means that you have integrated a bad driver AHCI or you don t use a.
  The point is before installing Windows XP, you need the right driver AHCI because otherwise you will get a BSOD or your HARD drive will not be recognized.
  On laptops equipped with Intel chipset, you need the Intel Storage Manager driver package because it contains the correct driver for you. You can download it on the Toshiba site or the Intel Web site.

  The drivers, you can copy on an external floppy drive and then you load it after booting from the XP disc by pressing F6. Or you create a new installation with our own drivers disc, and then you don't need an external floppy drive. For this, you can use nLite.

  Finally and most importantly, I think that this Toshiba link might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Welcome them

• I have a problem when I install windows xp

  I need to install windows xp on my laptop

  When I tried to install windows cp on my laptop, I got the problem below

  http://i333.Photobucket.com/albums/m375/RCP-Pro/RCPddd.gif

  Windows could not find my hard drive

  is my laptop: compaq presario cq57-401se

  I need to install windows xp somehow

  and I need to download my sata device driver... and I could not find

  Read the article from AMD on the link below and then read the downloadable PDF to find out how to integrate the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• Can I install Windows XP on a Satellite A300D - 14 p

  Can I install Windows XP on a Satellite A300D - 14 p?

  .. .thx for any info and/or messages...

  Hello

  Just to clarify something:

  -If you want to install Windows XP Home edition, but do not change the BIOS settings (leave it in AHCI mode) at the beginning of the procedure of facilities you must load a SATA driver by pressing F6. That's only way to install Windows XP Home edition with success
  -You can install WXP without driver SATA, but you must change the compatibility settings. Everything works fine, but if you change the settings on back ACHI you get BSOD every time when you try to start Windows XP Home edition

  If you want to install the SATA driver please install WXP if you use SATA starts the driver before installing Windows XP Home edition.