BSoD * STOP 0X000000F4 after Windows Update in February

Similar Questions

• laptop keyboard stopped working after Windows update.

  have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

  As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

  It suits it much of the time.

• X 500 - 10W QOSMIO webcam stop working after Windows updates

  Hello.

  I have a Toshiba QOSMIO X 500 - 10W PQX33E-00R00CIT.

  When I format my laptop and you reinstall the operating system Windows 7 Ultimate 64 bit, the webcam works perfectly.
  After I updated windows via windows update webcam stops working. Also with Windows 10 company LTSB. What should I do? Thank you.

  P. S.
  According to me, is just a problem of software, not hardware. The webcam works perfectly until I do the windows updates! ' * ' Microsoft!

  I find the problem. Do not install the latest version of Microsoft Silverlight. I hope that I formatted my computer for the last time!

• Outlook 2010 has stopped working after Windows updates

  November 11, 2015, my desktop, operating system Windows 7, installed about 28 updates to Windows. When I then put running the computer and open Microsoft Outlook 2010, Outlook closed almost immediately and this message appeared: "Microsoft Outlook has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "(I don't check other office software).

  After the problem with Outlook 2010, I rebooted the computer several times and each time has experienced the same problem with Outlook 2010.

  I used system restore to restore the system to before the updates of Windows, which included a critical update. Outlook, then worked correctly. I changed the settings for Windows Update to "Never check updates" so that Outlook is not yet damaged.

  Was it something wrong with the Windows updates?

  The problem was solved when Microsoft released a revised version of the KB3097877 update. Maxwell Joseph, moderator of the Forum Microsoft, announced this in the post, he created at 23:22:03 on November 12, 2015, on the thread titled "update KB3097877 crash.

  He said ' Microsoft has released a revised update, so we suggest you go ahead and uninstall Windows updates KB3097877 > installed updates. Restart the system and run the updates check and reinstall it back. »

• Broadcom Wireless stopped working after Windows updates

  Hello, everyone!

  I have a Pavilion dv6000 with wireless network. Everything was OK, but last Monday the blue wireless light was suddenly always amber and me did not have wireless access. These are the facts about my problem:

  * I reset my laptop to factory - wireless configuration works very well

  * Windows Update all installed, but one, updates - wireless works fine

  * I installed the new Windows Live Messenger - WIRELESS STOPED working

  * I uninstalled Windows Live Messenger - wireless works fine

  * Windows Update installed .NET Framework 3.5 (it was the update of Windows I jumped at step 2)-without WIRE EFFONDRES WORKING

  And now, my problem is that even if I try to "roll back" to a "restore point" before installing .NET, I get an error and I don't seem to be able to "Uninstall".NET 3.5. On the other hand, the pilot "Broadcom Wireless 802.11 g" has disappeared from the Device Manager and I don't seem to be able to reinstall it, or not reinstalling patches 'HP Wireless Manager' the problem.

  Can you help me, please?

  Thanks in advance,

  Nuno

  Work on laptop of my boss's son is having the same issue... I got to work by going into safe mode device manager and delete all references to pci bridge and restart... xp detects the wireless card as well as all pci bridge components and everything is golden... update XP sp3 now and go see if only the pipes still wireless card... will put in day this post when finished... im on xp, but I'm sure it would work for vista too many... questions you can email [email protected]

  * Update *.

  Installation of XP Service Pack 3 has made clear the wireless card again... is returned in Manager mode and the security apparatus and remove all references to the PCI subsystem devices except Bus PCI and ISA standard PCI bridge and rebooted and bam wireless card is back... it is quite boring... my recommendation would be to turn the builtin wireless power off and go buy a wireless usb card and do with it...

  Message edited by Akrifay on 02/20/2009 14:16

• game stops responding after Windows update

  Windows update affects the game

  Hello
  yesterday, I was prompted to install an update prior to the stoppage of my laptop.
  Today, when I turned on my laptop to play games, I noticed that the sound is not synchronized with the video.
  I also get stutters and random videos from lag smooth transitioning States.
  any ideas on which updates caused this?

  * In addition, I downloaded a demo of the game and it was working fine before, I was prompted to install an update. to my great disappointment, the game did not have this morning. I checked if it was blocked in the firewall, and no, it is not blocked. I run as admin. nothing works. in the end, I uninstalled the demo.

  Thanks in advance

  Once again...

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  It shows you the story - give all the updates that have been installed * before * the problem started.  He must always list if I remember correctly.

  It could be an update - but given that it could be one of many, we need a list.  ;-)

  Your other option... Install the updates individually...  Reboot between each of them and try your games.  If everything works, repeat until you have all updates installed without any problems or you have discovered the update that caused the problem and anyway - report back here with this information.  ;-)

• Task Scheduler stopped working after Windows updates

  This just happened to one the many updates just installed.  Microsoft does not identify the Console as being updated but I did a restore + the task manager has been fine.

  Installed November put up-to-date and Scheduler of tasks is still a Virgin is in one of the updates. hidden of course.  If someone found the number of update, please send along!

  Hello

  Unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Satellite L350-262 - WLAN stopped working after Windows update

  Hi - help please!

  Everything was fine until an automatic update on windows 7 applied about 14/15 December 2010. After that I turned off the wireless LAN to save battery while off line, then the wire will not pass on, I am currently connected via a cable connection 10/100.

  I tried a restore when this problem first occurred, and it worked. However, the updates have applied new themselevs and I cannot now restore the update that seems to have caused the problem before the date on which took place.

  I updated the driver that the adapter is realtek adapter and I have applied this update - realtek_wlan_win7_20100702, it did not work.

  I ran the diagnostics which indicates the following:-Please note the wireless switch on the before the computer is on, and shows on the page of diagnostic, Diagnostics tool recognizes also when the switch is off, so it doesn't seem to be a physical problem with the wireless LAN switch, but something software related that has disabled the wireless LAN

  Network card diagnostics information:

  Network adapter wireless network connection driver information:

  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Reference of the manufacturer.... : Realtek Semiconductor Corp.
  Provider of...: Microsoft
  Version...: 6.1159.323.2009
  INF file name... . : C:\Windows\INF\net8187bv32.inf
  Date of the INF.... July 13, 2009 20:46:35
  Name of the section.... : RTL8187B.ndi
  Hardware... ID: usb\vid_0bda & pid_8198 & rev_0200
  Instance... state flags: 0x180200a
  Status code of Device Manager. . : 0
  IfType...: 71
  Type of physical support...: 9

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  Information for a diagnosis of connection
  The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
  Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Interface type: Native WiFi

  Connection incident diagnosed

  List of visible access points: 0 item (s) total, 0 article (s) poster

  History of connection

  Information for Auto Configuration ID 1

  List of visible networks: 0 item (s) total, 0 article (s) poster

  List of favorite networks: 0 item (s)

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  For all the info on this session, see the event information of wireless connectivity.

  Helper class: Auto-Configuration
  Initialize status: success

  Information for a diagnosis of connection
  The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
  Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Interface type: Native WiFi

  Result of diagnosis: problem found

  Root cause:
  WiFi is disabled

  Detailed root cause:
  Radio is off (SW switch)

  Repair option:
  Turn on wireless capability

  Network Diagnostics log
  File name: 3E316BFA-A7C3-496A-8FF9-810B3E247842. Diagnose.0.ETL

  Collection information
  Computer name:
  Windows Version: 6.1
  Architecture: x 86
  Time: Wednesday, December 29, 2010 08:56:08

  Anyone has any ideas I would be very grateful, thank you

  Hello

  as I remember, there was the user with the same question in this forum. I don't know if he could solve it... I recommend:

  1 remove all WiFi drivers installed on your system and restart the round, then. Afterwards, go to the driver page and download wlan driver http://aps2.toshiba-tro.de/wlan/?page=downloads
  2. If it still does not, restore to previous operating system

• LabVIEW stopped working after windows update

  Windows XP 32 bit with Labview 2012 Service Pack 1 - Windows Auto-implementation to date 11 may 2013.  After update, Labview crashes at startup, nothing suits him.  I tried to restart and all the usual nonsense.  You can open the screw, but then the CPU enters a State of usage of 50% or 100% (which seems to be random) and Labview hangs just w / of the hourglass icon and never answers.  I can open NI MAX and querry various instruments, but crashes just Labview itself (start or any what VI).

  I need fix as soon as POSSIBLE, very tight edge scientist, cannot wait TO open their doors Monday morning.

  Help, please!

  
  

• The mouse scroll wheel stopped working after windows updates

  I have a Targus optical mouse with a scroll wheel; and he recently worked like this: when you use the scroll wheel in multiple windows, it would scroll the window (to move the vertical scroll bar) goes up and down.  It was a huge time saver, and I was used to it.

  I installed recently a whole bunch of patches from microsoft, including Windows 7 SP1 and Microsoft Mouse and keyboard Center.  The device is not listed in the center of the keyboard and mouse MS, but there is always a control-> mouse Panel.

  In Control Panel-> mouse, it has still the tab saying "wheel" roll the mouse to a notch wheel to scroll the rows x number of rows (it is selectable, I had 3, but tried to change as well); but it no longer works.  Now, it seems, I have to press the wheel to click, which then shows a circular scroll up/down, icon, and then I physically move the mouse up and down, and if I push down to click again on the wheel, I'm back to a regular movement of the mouse pointer.  It's MUCH more inefficient than the use of the wheel, so I'll try to figure out how I can get the drive working again.

  Should I uninstall MS Mouse and keyboard Center?  I thought about uninstalling and reinstalling the driver; but there is no mouse listed in the Device Manager (only has my touchpad there...)  It's a Targus optical mouse amu10usz; and even once, it was working fine before the installation of upgrades...

  Thanks for any help,
  A.J.

  Hello

  What is the number and the model of the computer?

  I will suggest you to check the mouse with different USB port or another computer, still question remains the same! Follow the mentioned methods:

  Method 1:

  Step 1:

  Update driver mouse

  a. click on start.

  b. click on Panel.

  c. using the drop down next to the opinion of: in the upper right, select large icons.

  d. click on mouse.

  e. click on hardware tab, click the Properties button.

  f. click on the driver tab, click set to update driver.

  Step 2:

  Uninstall the recent update and look for the question. You can first of all uninstall the update MS Mouse and keyboard Center and check.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  Method 2:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  I hope that helps!

• Sudden appearance of error STOP C000021A after automatic update of Windows

  Everyone knows a sudden STOP errors after that update Microsoft has done for his actions in the background? I'm setting up a SL500 for a client who has crashed all of a sudden with a STOP C000021A error. This error number (and the minidump file) point about csrss.exe crashing. The machine is no longer usable in 'normal' mode but it does not start in "safe" mode A review of the microsoft update log file reports the accident happening right after that the update ran. Before I nuke XP and opt for a restore to factory (as well as reinstall/configuration) I would like to know if others have seen this happen recently.

  In response to my own question here: I managed to do that work again. It turns out that the automatic update is more or less malware Microsoft's "Office Genuine Advantage". Remember, once again, why people accept this type of behavior of a business entity... No, not only to accept but reward in continuing to do business with them. Something in the water maybe?

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

  My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

  NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

  olou,

  If the suggestion on possible recording by Larry fails, see this page

  https://www.Adobe.com/account/my-products-services.html

  I'll try to ask a personal forum friend who knows what to do.

  For download, read this

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  and update, see

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?