BSoD (System_thread_exception_not_handled) error on acer Z5771

Similar Questions

• Pavilion g6: BSOD BUGCODE_USB_DRIVER error

  I have a HP Pavilion g6-1b60us running Windows 7.  Recently, I've been doing the BSOD with error code BUGCODE_USB_DRIVER at least once a day, sometimes several times a day. I tried updating the drivers, but am still affected by the same problem. Your help would be greatly appreciated!

  Hi there @reCATcha1 
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have found an error on blue screen BUGCODE_USB_DRIVER. I'm happy to help you.

  Have you tried to scan your system for what as malware, viruses etc?  If you do not I would recommend doing this first and as a result, clean your system.

  If you know approximately when the problem started, you can try to do a system restore to a point before it all started.

  Using Microsoft System Restore (Windows 7)

  Otherwise, I recommend you back up the contents of your hard drive and then look at the system recovery, I would start with just the drivers, and if it does not help, then a factory restore.

  Performing a recovery of system HP (Windows 7)
  Troubleshooting problems of recovery HP System (Windows 7)

• Windows Vista SP2, random BSOD with error checking code 0 x 19

  Hi all

  I have seemingly random crashes on my old laptop 3 years recently - BSOD with error checking code 0 x 0000019 (0x00000020, 0xe92f4780, 0xe92f48d0, 0x0a2a0440), and BlueScreenView says that accidents are caused by ntkrnlpa.exe and Ntfs.sys. I have absolutely no idea why it happened--unusual does update, none of the material changes & software installations. The system hangs especially after maybe one or two days after starting with some sleep & wake ups inbetween and the only accidents while there are prominent running shows - namely, all the accidents that happened while I was running Firefox. Seconds before the BSoD (shell & all) system simply freezes and does not respond to ctrl + alt + delete, but is still running (as indicated by the fact that once, I forced a power off and after that restart the event log indicates the previous stop at was not planned), then watch the usual BSoD screen.

  After doing some googling, I began to suspect that this should be a memory or a hard drive problem, or maybe an overheating causing the two since he not there no significant change of software on my computer recently again issues just appeared without reason. So I cleaned my laptop fan and the heatsink and ensured that the hot air can leave the chassis without being blocked, did some checking of memory with memory auditing Windows - no problems in 5 innings and ran chkdsk on my system partition with all available options - perfectly normal, but the chkdsk has acted quite strangely that check all took about 30 seconds and no normal as the ID information of partition, size etc. that should be there never appeared; is this a normal behavior? or something is wrong with my chkdsk?

  I'm still (lol) impatiently waiting for the next crash, not sure whether the problem is still there or not. Meanwhile could you please help me understand what is the problem with my system?

  It seems that the disc is the most likely cause. If it is intermittent, it may be difficult to diagnose.

  The manufacturer of the laptop provides any diagnosis?  Several manufacturers have a key at startup to access the diagnostics.

  CHKDSK should last several minutes. There is information about the different ways to run chkdsk here:

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You can try this disc test program:

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/

  If the version of WIndows does not find anything. Try to use the version BACK from a CD.

• BSOD BAD_POOL_CALLER error with my acer E1 - 572G laptop computer running Windows 8

  Hello

  Nice day

  I also have a problem with my acer E1 - 572G laptop computer running Windows 8.

  Only during the restart of my laptop, it's always show the BAD_POOL_CALLER error code

  and a blue screen.

  She does whenever I want to restart. Stop and then put on now displays errors.

  I encountered this error several times.

  I downloaded the minidump files.

  The link to the files is:

  https://www.mediafire.com/folder/3nn883rs78p4qqe,bfcx73m2a3dodp6,edk1ebfdmezdakt,ce7mbir7enbznjr,qzdxpddiurioywy,mctv8lmlptdr86t,aae9dt4xxhwkq36,4ncglnqhedwuwnp,vjaejk18xob2b2w,03cjeaaanxyfs6a,ltrnk3oh4jq3e00,v2l8kyaawhnyluq,ttt1t5obw5gcayc,8oobh626v64sp0h,wmkwawbugww12et,qgrrwp1xrp3w2yk/shared

  Kindly let me know if all minidump files all belong to the same problem.

  Please please help me.

  Kind regards

  Ashaikhd

  Separated from: https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/badpoolcaller-BSOD/202df5d4-b74c-4489-b773-ac40e286aec7

  These were related to bScsiSDa.sys SD 3.0 Controller of Broadcom Corporation in conflict with your two applications of malicious software.  I remove both (the Defender built in use) and install the latest broadcom driver available, even if it is the same date that drivers become corrupt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\070514-45203-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9600 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9600.17085.amd64fre.winblue_gdr.140330 - 1035
  Computer name:
  Kernel base = 0xfffff800 'f1e05000 PsLoadedModuleList = 0xfffff800' f20cf2d0
  The debugging session: Fri Jul 4 20:21:13.557 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:20.332
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck C2, {7, 1200, 247c894c, fffff801d2f6a733}

  WARNING: Unable to verify timestamp for bScsiSDa.sys
  ERROR: Module load completed but symbols can be loaded for bScsiSDa.sys
  Probably caused by: bScsiSDa.sys (bScsiSDa + e656)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  BAD_POOL_CALLER (c2)
  The current thread is doing a bad pool request.  In general, it is an IRQL bad or double freeing the same allocation, etc.
  Arguments:
  Arg1: 0000000000000007, attempt to free pool which was already freed
  Arg2: 0000000000001200, (reserved)
  Arg3: blocking content from the memory of the 00000000247c894c pool.
  Arg4: fffff801d2f6a733, address of the block of pool is released

  Debugging information:
  ------------------

  BUGCHECK_STR: 0xc2_7

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  LAST_CONTROL_TRANSFER: from fffff800f209b42a to fffff800f1f58fa0

  STACK_TEXT:
  ffffd000 '784b26a8 fffff800' f209b42a: 00000000'000000 c 2 00000000'00000007 00000000'00001200 00000000' 247c894c: nt! KeBugCheckEx
  ffffd000 '784b26b0 fffff800' f2253ee8: fffff800 'f20a8300 00000000' 00000082 ffffd000 '784b27a8 fffff800' f1e35711: nt! ExFreePoolWithTag + 0x114a
  ffffd000 '784b 2780 fffff801' d2f6a656: 00000030' ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 00000000 b 784, 2910: nt! RtlFreeUnicodeString + 0x18
  ffffd000 '784b27b0 00000000' 00000030: ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 784b 2910 00000000 00000000': bScsiSDa + 0xe656
  ' ffffd000 '784b27b8 ffffe001' d7fcfaa0: 00000000 ' ffffd000 00000000 ' 784b 2910 00000000 00000000' 00000000': 0 x 30 fffff800
  ffffd000'784b27c0 00000000' 00000000: ffffd000' 784b 2910 00000000 00000000' fffff800'00000000 00000000 00000000': 0xffffe001'd7fcfaa0

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  bScsiSDa + e656
  fffff801'd2f6a656 488b8df0000000 mov rcx, qword ptr [rbp + 0F0h]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: bScsiSDa + e656

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: bScsiSDa

  Nom_image: bScsiSDa.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51e9aefb

  FAILURE_BUCKET_ID: 0xc2_7_bScsiSDa + e656

  BUCKET_ID: 0xc2_7_bScsiSDa + e656

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0xc2_7_bscsisda + e656

  FAILURE_ID_HASH: {cff94011-1a4c-5d32-9ebb-2de22db811dd}

  Follow-up: MachineOwner
  ---------

• BSOD no error checking for does not aspire VN7 - 792G

  Hello world

  I got my aspire VN7 - 792G (v17 nitro Black edition) since November 2015 and since last week, I was doing some odd BSOD bugcheck (0x000001d3) without errors. Using BlueScreenView I noticed that the error came from QCAMainx64.

  This happened last week and so I did a system restore and then updated my drivers wireless at 11.0.0.471. I've also updated my Nvidia drivers to the latest version in the case who had problems.

  I did a sfc scannow which gave rise to no error, I did a check of windows memory which gave rise to no problem and a disk check which resulted without any problem.

  The strangest thing was that the BSOD is produced especially when my laptop was being called in the upper left corner. But after a week of no BSOD they now returned at random moments.

  The first BSOD happened on cdrom.sys and netio.sys (also 0x000001d3) and then 2 other BSOD's happened (one while doing a system restore point) and the other so I just browsing youtube, which happened on the QCAMainx64 again.

  I left the Netherlands in Dubai and I left my receipt to the Netherlands, so I only have a scan of my warranty paper and ordering the product emails to prove that the laptop is mine. I was not able to repair yet because I need my laptop for work as well.

  I'll add my minidump files to this post. If anyone knows anything I might have missed or which is better I can do to avoid BSOD.

  I am running Windows 8.1. It seems that, on the acer site, that I can not download more updates to driver for windows 8.1 because they offer only win 10. And I'd rather not updated for windows 10 in all.

  Thank you for your time.

  http://www.filedropper.com/desktop_27

  Try to update the driver with this version:

  http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=FileInfo&ID=2011&lang...

  Click Download, double-click the auto unpacking package and look for a configuration or install the file.

  Web site is 100% reliable.

  have an update on nvidia drivers too:

  http://www.GeForce.com/drivers/results/99508

• After uninstalling and reinstalling 42.0 FF, I get BSOD 0x000000F4 error

  FF has been excruciatingly slow and constantly crashed. I tried to reset, but does not solve the problem, so I did a uninstall and reinstall. Now, I get the BSOD every day, stating that "a process or thread crucial to system operation has unexpectedly released or terminated" and noting that the problem is often caused by the problem with newly installed hardware or software. FF is the only new software that I installed it. I have not installed new hardware. The stop error is always the same: 0x000000F4. Thanks for your suggestions you may have.

  Thanks for the suggestion, Kyle. I uninstalled and reinstalled FireFox and did not get a BSOD. It only 24 hours since I've done this, but so far, everything is fine. Thanks again!

• V3 - 722G several BSOD after return to Acer repair

  Hello guys,.

  Short version:

  I'll be back just my laptop ACER repair center and I just did a complete reinstall of windows 8 with my USB stick recovery.  I spend about 15 to 30 seconds in the home screen accepting the agreement, computer name, etc., and the computer restarts with a BSOD.  I've seen 2 different BSOD so far:

  DRIVER_VERIFIER_DETECTED_VIOLATION

  UNEXPECTED_KERNEL_MODE_TRAP (nvlddmkm.sys)

  I really want to avoid sending this laptop to a 2nd repair, any ideas?

  Long version:

  I sent my laptop in for repair 2-3 weeks after the purchase when I noticed the 750 M from NVIDIA had stopped working a FAILURE of TDR video associate and I could no longer access NVIDIA settings.  The computer was essentially back to entirely using integrated graphics card intel (and it was very obvious of games with epic FPS loss). I've tried every driver wipes, reinstalls, different versions, spyware scans, analyses anti-virus, OS repairs, even tried wiping the computer clean with my recovery USB and reset the laptop back to finish on the default values of the box.  No luck, so I sent it to Acer repair center and they supposedly don't set.

  Well a month later, when I get it back, I turn it on and everything seems to work fine, so I'm going to update NVIDIA drivers to the latest version and Ottoman.  Computer BSOD over and over.  Tried to go back to older drivers and other versions with no luck.  I finally gave up and AGAIN completely erased and restarted my computer from scratch using my USB recovery.  But this time, I can't get past the screen of welcome/configuration windows 8 without it BSOD'ing with the above mentioned messages.  I tried to reset/wipe the computer AGAIN, I have tried refreshing, I tried running and disabling driver verification command line.  I tried to start windows with a low resolution.  I tried to boot into safe mode (cannot do installation in safe mode).  I tried to disable driver signature checking.  I tried over and over to auto repair.  I tried to isolate / removal / replacement of the RAM.  Heck, I even tried removing the WLAN card.  I'm out of ideas.  I was Googling for hours trying to find similar problems and have not met many solutions where people are stuck on the welcome/configuration with BSOD screen.

  The worst part is that I wrote on the box, I sent to the repair center I troubleshoot-performed and concluded that a video card failure or breakdown.  When they sent the laptop to me, the video card is not replaced.  In fact, no hardware has been replaced.  I would be not sent the laptop in a repair center after hours of troubleshooting if I didn't think it was a hardware problem.  The real diagnosis on my repair slip read: 'enabled Intel graphics.  All video past card tests. "Oh really?  Graphics card intel enabled?  I don't want graphic card intel, I want my paid for NVIDIA GRAPHICS!  You're killing me, Acer.

  This is my first purchase from Acer and I'm banging my head on the walls.  I'd like some suggestions.

  --------------------------------

  System:

  Aspire V3 - 722 G-9829

  All of the components that are currently in stock

  Hi simplifies

  I'm sorry to hear about the problems you've had, but I think that the only solution is to speak to press again for a 2nd repair.

• BSOD (Stop error) on commissioning. Help, please!

  Stop 0x0000000A (0x00000002, 0x00000001, 0x00000000, 0x804DC11D)
  IRQL_Less_or_Equal

  First time this has happened only a few days ago. I had Windows XP Edition SP3 family.

  I could not understand the problem and eventually reformat my C: drive and everything seemed fine. Then suddenly alluva the error again.

  It begins one minute after I connect to my office, then after that I have to the windows startup screen and he mistakes for the BSOD.

  Each time, it's the exact same error, so I don't know it's coming from the same source. And I don't know how it would be a virus that I have a virus scanner. All I hope is that this is something I can fix it for a few months without constantly reformatting or wipe my D: drive as there are things there I need and don't want to spend a whole day backup stuff.

  An overview of this problem would be appreciated. And I can't log in to get a minidump. The stop error is all what I have.

  I checked the PCI (my gfx and 2 wireless cards) cards by taking out them and the problem persists. I also checked the RAM sticks last time it happened by removing one and try. the problem persisted. I think it may be the motherboard or hard drive related... which I am dreading.

  --------------------------------------------------------------------------------

  >.

  I googled and found this... Sorry if I'm not allowed to post outside links, but I'm 99% positive it's that one. Laughing out loud.

  http://www.ascendtech.us/ITEMDESC.asp?IC=MB4DELDIMEN3000

  Heck. It's so much more enjoyable when things are easy. ;-) Well, since you have reinstalled Windows make sure you have installed the updated for all your hardware drivers. You won't get the since the Dell for your Dell Dimension 3000 website. The best way to do is to enter your Service tag in the Dell support page.

  Once you have installed the updated drivers (and don't forget Desktop Software from Dell if this model has), if the problem recurs, then you for lack of material. Just get out the bits and putting them again - then it won't do not a complete waste of time. You need solve the material problems systematically. Dell has diagnostics which reach you by pressing F12 when the computer starts. You will see the start of the diagnostic utility option. Run full diagnostics on everything. It takes some time. If all goes, I would always test the RAM with Memtest86 +. We have seen many machines that passed the Dell diagnostics, but which had hardware problems. However, if the diagnostics show failures don't bother. Replace defective components.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  One thing to note - it is an old machine. If the motherboard is the bad part, it's time to just buy a new computer. It will be uneconomic to put hundreds of dollars into this old machine. Wait next week and buy a new Dell running Windows 7. MS - MVP - Elephant Boy computers - don't panic!

• BSOD 0x000000D1 Error.

  Original title: several BSOD and not the more Tech savvy person.

  I installed a new processor a few days ago an am3 + FX 6350 6 core and I had problem after problem with drivers and other things.

  I get

  0x000000D1 with RTLH64.sys

  0x0000000A IQRL_Not_Less_Or_Equal

  I've been reading around for awhile now and I need to show you my error logs, but I don't know how.

  Someone would ask me what to do?

  Thank you!

  The attached kernel dump file is IRQL_NOT_LESS_OR_EQUAL (a) bug check.

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  --------------------

  1. AsrAppCharger.sys is listed and which is ASRock App Charger, very known to cause BSOD. Uninstall as soon as possible.

  2 remove and replace AVG with Microsoft Security Essentials for purposes of troubleshooting temporary, as it is most likely cause conflicts:

  -AVG removal http://www.Avg.com/us-en/utilities

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  Kind regards

  Patrick

• HP laptop: BSOD, «SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ATIKMDAG.» (SYS).

  I recently bought a HP laptop.  The product number is F9H90UA #ABA and the model is 15-g071nr.

  Whenever I run online of youtube videos, the computer will crash.  I get the error, SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ATIKMDAG. (SYS).    Is this a common problem with this model?  Thank you.

  Invoke the charm of the search and type in HP. You should see an icon that says HP Recovery or Recovery Manager. Click on it.

  That should start the HP Recovery Manager.

  Click on drivers and Applications reinstallation

  

  Now find the NVIDIA driver on the list. Click on the box to the left and tyhen, click on install, down, down to the right.

  The image is only an example of a loan recovery Manager product formaer.

  

• BSoD 0x9f error code

  In recent weeks, my computer started showing a BSoD, titled State pilot failure, whenever I stop, and sometimes, when I restart.  The computer hangs on the closing down of the screen for at least ten minutes, until appears the BSoD, where making me one forced to close.  After having extensively searched through Microsoft' forums and topics of support I still have not found a solution.  I ran Debugging Tools for Windows to open a dump file, and it revealed an error code 0x9f with an ntoskrnl.exe image name.  She led me to believe that my ntoskrnl.exe is corrupted or out of date, but I know that it is not recommended to replace this program unless that busy on a Microsoft OS disc.  I bought my PC from Future Shop, so it isn't an OS disc.

  Some of the solutions related to this error message, he said that the problem was possibly linked to attached USB devices.  The only USB device I connected is an OCZ Eclipse Laser Mouse.

  The BSoD has a side effect that if she interrupts a reboot of the system that is required to complete the system configuration, it leaves such configurations what.

  My PC specs are:
  Manufacturer: gateway
  Model: FX6800 - 03 h
  OS: Windows Vista Home Premium 64-bit
  SP: Service Pack 2
  Processor: Intel Core i7 920

  Here is the report of the bucket.  I'm totally familiar with this program then please let me know what I can do to provide more information if required.

  Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\Mini091909-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  Computer name:
  Kernel base = 0xfffff800 '02663000 PsLoadedModuleList = 0xfffff800' 02827dd0
  The debugging session: Fri Sep 17 23:57:05.741 2009 (GMT-7)
  System Uptime: 0 days 4:13:43.191
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  ....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 1000009F, {4, 258, fffffa80078fa040, 0}

  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Probably caused by: ntoskrnl.exe (nt + 5cc7f)

  Follow-up: MachineOwner
  ---------

  0: kd > nt! _KPRCB
  ^ Syntax error in ' nt! _KPRCB'
  0: kd > referenced: nt! _KPRCB
  ^ Bad registry error in ' referenced: nt! _KPRCB'
  0: kd > nt! _KPRCB
  ^ Syntax error in ' nt! _KPRCB'
  0: kd > y
  ^ Syntax error in '-y'
  0: kd > _NT_SYMBOL_PATH
  ^ Syntax error in "_NT_SYMBOL_PATH.
  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000004, the change in diet has expired waiting to synchronize with the Pnp
  subsystem.
  Arg2: 0000000000000258, the time-out in seconds.
  Arg3: fffffa80078fa040, the thread that currently holds the lock of Pnp.
  Arg4: 0000000000000000

  Debugging information:
  ------------------

  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************

  ADDITIONAL_DEBUG_TEXT:
  Use '! findthebuild' command to search for the generation of target information.
  If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.

  MODULE_NAME: nt

  FAULTING_MODULE: fffff80002663000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 49e0237f

  DRVPOWERSTATE_SUBCODE: 4

  FAULTING_THREAD: fffffa80078fa040

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X9F

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from 0000000000000001 to fffff800026bfc7f

  STACK_TEXT:
  fffffa60'01daf510 00000001' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000001: nt + 0x5cc7f
  fffffa60 '01daf518 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000001 fffff800'026c3c9b: 0x1

  STACK_COMMAND: .thread 0xfffffa80078fa040; Ko

  FOLLOWUP_IP:
  NT + 5cc7f
  fffff800'026bfc7f 488d8c2400010000 lea rcx, [rsp + 100 h]

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: nt + 5cc7f

  FOLLOWUP_NAME: MachineOwner

  Nom_image: ntoskrnl.exe

  BUCKET_ID: WRONG_SYMBOLS

  Follow-up: MachineOwner
  ---------

  0: kd >! findthebuild
  FindTheBuild service not found
  0: kd >! findthebuild s; .reload
  Use:! findthebuild [e |-Y] [PEI | s |-r] [-l

  ]
  -E - disables exepath update
  Y - disables friendly update
  -l - hide local sets for the railways (must be last).
  ' *' define first sympath hiding in the local cache.
  Pei - adds sympath and exepath discovery railroads
  -r - sets of paths like sympath and exepath discovery
  s - adds sympath and exepath discovery railroads
  -t--detects the code paths for this trial version
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  0: kd > lmvm nt
  start end module name
  fffff800 ' 02663000 fffff800' 02b7b000 nt T (no symbol)
  Loaded symbol image file: ntoskrnl.exe
  Image path: \SystemRoot\system32\ntoskrnl.exe
  Image name: ntoskrnl.exe
  Timestamp: Fri Apr 10 21:58:39 2009 (49E0237F)
  CheckSum: 00487B 94
  ImageSize: 00518000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Any help would be greatly appreciated.  Thank you for your time.

  Hello

  It's a bad driver more likely. Have you added all the other new features or updated drivers just before that
  has started? Look in the Windows updates too to see if new drivers have been added at this time there. Use the utility
  below to read the minidump.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  ------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 7 BSOD SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  Hey, I really need help with this problem, today 13/10/2013, I got a BSOD at 04:14. For more details, I enclose the minidump here:

  https://SkyDrive.live.com/?v=FirstRunView#CID=ffeb8e1ecdbb1c20

  If you could help me I will be very proud. Cordially, Cristian.

  Thank you!

  The attached file of the DMP is the error checking SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) .

  This indicates that a system thread threw an exception who did not catch the error handler.

  Bugcheck 1000007E, {c0000005, 82e24734, 8ab1f648, 8ab1f220}

  ^^ The 1st parameter of error c0000005 checking indicating an access violation has occurred, we will see what caused:

  : kd > .exr 0xffffffff8ab1f648
  ExceptionAddress: 82e24734 (nt!) RtlEqualUnicodeString+ 0x0000002f)
  ExceptionCode: c0000005 (access violation)

  It was caused by RtlEqualUnicodeString which is the routine compares two Unicode strings to determine if they are equal. Most likely a related device driver.

  ----------------------------------------

  Remove and replace avast! with Microsoft Security Essentials for purposes of troubleshooting temporary:

  avast!-removal tool from http://www.avast.com/uninstall-utility

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  In your list of drivers loaded, dtsoftbus01.sys figure who is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

  Kind regards

  Patrick

• BSOD with error code Bugcheck: 0xD1

  Original title: the dreaded BSOD.

  Hi, finally bite the bullet and ask for help.

  Establish an office a few years back who worked perfectly without any problem, a couple of years, I decided it was time to upgrade and replaced the motherboard, RAM and graphics card with a clean install of Windows 7. He ran very well with some heavy for a week or two games and then the first BSOD came, nothing thought and turned down my graphics settings and tried to play again and then he started blue screening 5 minutes of any game. After many graphics driver reinstall (with driver sweeper), memtest runs and HD check blue screens have continued and I finally gave up on it.

  Fast forward 2 years, I made another attempt on the desktop, 10 hours of updates Windows and updates of pilot followed a complete with MSE analysis and I booted up Fallout New Vegas, the game ran perfectly for 2 days and then blue screens started.

  Help please!

  Processor: AMD Phenom II x 4 955

  RAM: 2x2gb Crucial

  Mobo: Asus M4A785TD-V Evo

  OS: Windows 7 64-bit

  PSU: Corsair CX500

  GPU: Gigabyte Nvidia GTX460

  No overclocking

  Information System

  Minidumps

  DriverView

  WhoCrashed reports

  Friday, April 18, 2014 11:18:08 GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0xAA2A)
  Bugcheck code: 0xD1 (24, 0 x 2, 0 x 0 x 0, 0xFFFFF88004172A2A)
  Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\drivers\dxgmms1.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: DirectX Graphics MMS
  Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Thursday, April 17, 2014 22:38:20 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\041714-27861-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002FABB05, 0xFFFFF88007EB6E30, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Thursday, April 17, 2014 22:09:37 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\041714-68921-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Verification of error code: 0 x 50 (1, 0xFFFFF80002E86E49, 0xFFFFF88006C3D000, 0 x 0 x 0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Thank you!

  I would remove the stick that failed and operate the system for a few days.

  Kind regards

  Patrick

• CSRSS. "BSOD" EXE Error"VISTA_DRIVER_FAULT.

  Original title: CSRSS. BSOD EXE

  I started having problems with the computer freezing and BSODing, or gel with a blue, or pink white screen then restarting.  I was able to get a minidump and it is as follows:

  CRITICAL_OBJECT_TERMINATION (f4)

  A process or thread crucial to system operation has unexpectedly left or been

  terminated.

  Several processes and threads are necessary to the functioning of the

  System; When they are finished (for some reason any), the system may not

  function longer.

  Arguments:

  Arg1: 0000000000000003, process

  Arg2: fffffa800f62fb30, object of ends

  Arg3: fffffa800f62fe10, name of the process image file

  Arg4: fffff800029927b0, explanatory message (ascii)

  Debugging information:

  ------------------

  PROCESS_OBJECT: fffffa800f62fb30

  Nom_image: csrss.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  MODULE_NAME: csrss

  FAULTING_MODULE: 0000000000000000

  Nom_processus: csrss.exe

  EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - the instruction at 0 x %p memory referenced to 0 x %p. The required data has not been placed in memory because of an error of e state / 0 x %x.

  BUGCHECK_STR: 0xF4_IOERR

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  CURRENT_IRQL: 0

  STACK_TEXT:

  fffff880 '05fe6e38 fffff800' 02a1bab2: 00000000' 000000f4 00000000 00000003' fffffa80 '0f62fb30 fffffa80' 0f62fe10: nt! KeBugCheckEx

  fffff880 '05fe6e40 fffff800' 029c6abb: ffffffff 'ffffffff fffffa80' 0eab9b50 fffffa80 '0f62fb30 fffffa80' 0f62fb30: nt! PspCatchCriticalBreak + 0 x 92

  fffff880'05fe6e80 fffff800'02946674: ffffffff 'ffffffff 00000000 00000001' fffffa80' 0f62fb30 00000000'00000008: nt! : NNGAKEGL: 'chain' + 0 x 17486

  fffff880 '05fe6ed0 fffff800' 0268ce53: fffffa80'0f62fb30 fffff800 'c0000006 fffffa80' 0eab9b50 00000000' 00980e00: nt! NtTerminateProcess + 0xf4

  fffff880'05fe6f50 fffff800'02689410: fffff800 ' 026d882f fffff880 '05fe7a38 fffff880' 05fe7790 fffff880 ' 05fe7ae0: nt! KiSystemServiceCopyEnd + 0x13

  fffff880 '05fe70e8 fffff800' 026d882f: fffff880'05fe7a38 fffff880 '05fe7790 fffff880' 05fe7ae0 00000000' 00981b 10: nt! KiServiceLinkage

  fffff880'05fe70f0 fffff800'0268 d 242: fffff880 '05fe7a38 00000000'00013600 fffff880' 05fe7ae0 00000000' 009815e8: nt! : FNODOBFM: 'string' + 0x488e4

  "fffff880 '05fe7900 fffff800' 0268bdba: 00000000 ' 000007fe 00000000 ' fda2d8c0 00000000'00000001 00000000'00013600: nt! KiExceptionDispatch + 0xc2

  fffff880 '05fe7ae0 00000000' 77c69c42: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x23a

  00000000'00981530 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x77c69c42

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe

  BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe

  Follow-up: MachineOwner
  I ran spybot and malware bytes and only has not seemed to fix anything.  Thanks for any input.

  VB

  There was an error of e/s causing a critical process to close.  I would like to start by running a file system check & CHKDSK

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  
  If you have any questions please ask us.
  Check the file system (CFS) Scan and repair system files
  CHKDSK /F /R
  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found all the data available in this area could be lost so as always back up your data.
  Run CHKDSK /R /F from a high command (run as administrator).
  Do this for each hard drive on your system.
  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.
  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.
  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  CHKDSK LogFile:
  Click Start and type "eventvwr.msc" (without the quotes) and press enter
  Expand the topic the Windows logs, and then select the Application log file entry.
  Double-click the Source column heading.
  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
  Copy / paste the results in your next post.

• BSOD stop error 9F: WINDOWS_SYMBOLS

  Hello:

  I have a BSOD on my laptop (Win 7 Pro 64 - bit SP1) with stop error 9F about Windows 7 Driver fault and WRONG_SYMBOLS based on the details of the minidump below.

  This happens on the sleep/hibernate.

  Appreciate your answer on how to solve this problem in a simple way? I saved the workspace of SYMBOLS and I could compare this to an existing location on the hard drive where the original files are, find the one (s) missing or recharge from a link on the Microsoft Web site? Don't know.

  Thanks for your support, much appreciated.

  Here are the details:

  ADDITIONAL_DEBUG_TEXT:
  You can run '.symfix; .reload' to try to fix the symbols path and of loading symbol.

  MODULE_NAME: nt

  FAULTING_MODULE: fffff80003203000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 51fb06cd

  DRVPOWERSTATE_SUBCODE: 3

  DEVICE_OBJECT: fffffa80076cd060

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0X9F

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff800032e88c2 to fffff80003278b80

  STACK_TEXT:
  "" fffff800 ' 0518 c 388 fffff800 ' 032e88c2: 00000000' 00000000'00000003 fffffa80 ' 076 cd 060 fffff800 0000009f "0518c3d8: nt + 0x75b80
  fffff800'0518 c 390 00000000' 0000009f: 00000000 '00000003 fffffa80' 076cd 060 fffff800 '0518c3d8 fffffa80' 0c39f010: nt + 0xe58c2
  fffff800'0518 c 398 00000000'00000003: fffffa80'076 cd 060 fffff800 '0518c3d8 fffffa80' 0c39f010 00000000' c00000bb: 0x9f
  fffff800'0518c3a0 fffffa80'076 cd 060: fffff800 '0518c3d8 fffffa80' 0c39f010 00000000' 00000000 00000000': 0 x 3 c00000bb
  fffff800 '0518c3a8 fffff800' 0518c3d8: fffffa80 '0c39f010 00000000' c00000bb 00000000 00000000' fffff800' 03428b 80: 0xfffffa80'076 cd 060
  fffff800 '0518c3b0 fffffa80' 0c39f010: 00000000' c00000bb 00000000 00000000' fffff800' 03428b 80 00000000'00000002: 0xfffff800'0518c3d8
  "fffff800 '0518c3b8 00000000' c00000bb: 00000000 ' 00000000 fffff800 ' 03428b 80 00000000'00000002 00000000'00018000: 0xfffffa80'0c39f010
  fffff800'0518c3c0 00000000' 00000000: fffff800 '03428b 80 00000000'00000002 00000000'00018000 fffff800' 03428b 70: 0xc00000bb

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT + 75 b 80
  fffff800'03278 b 80 48894c 2408 mov qword ptr [rsp + 8], rcx

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: nt + 75 b 80

  FOLLOWUP_NAME: MachineOwner

  Nom_image: ntoskrnl.exe

  BUCKET_ID: WRONG_SYMBOLS

  Follow-up: MachineOwner

  Hello

  You must work with Kaspersky Support and forums to try to solve the problems you
  know the two components involved. And unless you're will be to use another adapter Wifi
  you leave uninstalled Kaspersky. Use MSE or Avast. Possible Lenovo or Atheros
  can provide a driver that is not incompatible (although this is mainly Kaspersky).

  Rob - SpiritX