Pavilion g6: BSOD BUGCODE_USB_DRIVER error

Similar Questions

• Windows Vista SP2, random BSOD with error checking code 0 x 19

  Hi all

  I have seemingly random crashes on my old laptop 3 years recently - BSOD with error checking code 0 x 0000019 (0x00000020, 0xe92f4780, 0xe92f48d0, 0x0a2a0440), and BlueScreenView says that accidents are caused by ntkrnlpa.exe and Ntfs.sys. I have absolutely no idea why it happened--unusual does update, none of the material changes & software installations. The system hangs especially after maybe one or two days after starting with some sleep & wake ups inbetween and the only accidents while there are prominent running shows - namely, all the accidents that happened while I was running Firefox. Seconds before the BSoD (shell & all) system simply freezes and does not respond to ctrl + alt + delete, but is still running (as indicated by the fact that once, I forced a power off and after that restart the event log indicates the previous stop at was not planned), then watch the usual BSoD screen.

  After doing some googling, I began to suspect that this should be a memory or a hard drive problem, or maybe an overheating causing the two since he not there no significant change of software on my computer recently again issues just appeared without reason. So I cleaned my laptop fan and the heatsink and ensured that the hot air can leave the chassis without being blocked, did some checking of memory with memory auditing Windows - no problems in 5 innings and ran chkdsk on my system partition with all available options - perfectly normal, but the chkdsk has acted quite strangely that check all took about 30 seconds and no normal as the ID information of partition, size etc. that should be there never appeared; is this a normal behavior? or something is wrong with my chkdsk?

  I'm still (lol) impatiently waiting for the next crash, not sure whether the problem is still there or not. Meanwhile could you please help me understand what is the problem with my system?

  It seems that the disc is the most likely cause. If it is intermittent, it may be difficult to diagnose.

  The manufacturer of the laptop provides any diagnosis?  Several manufacturers have a key at startup to access the diagnostics.

  CHKDSK should last several minutes. There is information about the different ways to run chkdsk here:

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  You can try this disc test program:

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/

  If the version of WIndows does not find anything. Try to use the version BACK from a CD.

• BSoD (System_thread_exception_not_handled) error on acer Z5771

  I hope someone can help me with BSoD (System_thread_exception_not_handled) error screen when I try to install Win 8 on an acer Z5771

  Unfortunately the files had no information on the BSOD.

  However, the error may be an incompatible video driver.

  There is a suggestion in the following link can help:

  http://social.technet.Microsoft.com/forums/en/w8itproinstall/thread/520411d1-b7fb-4C9F-BB6D-7964cfb7aea6#f4bc4923-8a8b-4403-86ae-b517f15b185d

  What has been proposed is to install the latest NVIDIA of NVIDIA display driver before upgrade:

  http://www.nvidia.com/object/WIN8-Win7-WinVista-64bit-310.90-WHQL-driver.html

  There is also mention of the Acer Upgrade Wizard tool, you could have a look if you don't have it already:

  http://us.Acer.com/AC/en/us/content/upgrade-Assistant-tool

• HP pavilion followed bsod to black screen and the start program menu f10 does not work

  Hello

  Come play a game on my pc when a BSOD pops up... then in a few seconds my pc stops and starts again. But now I'm stuck in a black screen: a disk error occurred press ctrl alt del to restart. When I do, I'm back to the blue screen (the screen where you can choose to go to recovery, configuration and startup menu). The f10 key recovery does not, others do it... What can I do? Im not happy to lose all my documents but if not the end of the world because I have an external drive with the most important things about it. I don't have a recovery cd... I hope someone can help me because I can't find answers on the internet...

  I can't find the type of pc but its old I guess from a pavilion of 87... cannot seek in the pc for the exact number.

  Thank you!

  I bought a new PC...

• Bugcode_usb_driver error Sony Vaio VPCEH14FM

  From past 2 months I get a blue screen of death with this error "bugcode_usb_driver" I have updated all the drivers from the sony Web site and restored my system to factory already 3 times, but still have same problems. It happens when I am not even using one of the usb ports also sometimes (not always) if I move my laptop, it makes a noise as I take on the cable usb or something.

  Here are some details:

  SONY VAIO VPCEH14FM

  Windows 7

  Technical information:

  STOP: 0X000000FE (0 X 0000000000000006, 0 X 0000000000000005, 0 X 0000000000000008, 0XFFFFFA8008ACEB20)

  The Minidump file link:

  https://onedrive.live.com/redir?RESID=F9EBE5310B417C17! 766 & authkey =! ADD7BSTMPHwyZ64 & ithint = the file % 2czip

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting the BSOD with an error message.

  I suggest you to refer to the suggestions by SpiritX MS MVP responded on 28 January 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/bugcodeusbdriver-bluescreen-Windows-7/3d631fa3-1964-4911-9337-fb75d15bf1db

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Pavilion g6 BSOD and noises

  Hello

  I got a new g6 pavilion laptop, windows 7, I've literally only use it to facebook and write essays. sometimes ill get the BSOD for no apparent reason, maybe once a month or more and I noticed that he made some sounds by clicking / hum if you put your ear to the bottom of him, but he is not at the moment... I looked errors on the bios and it says 03F0...

  any ideas? Thank you

  Hello

  Start Device Manager

  Not found boot device

  3F0

  This indicates a potential problem with the hard drive. Run the hard drive test. For more information, see test of a hard disk by using the Built in Self Test .

  New laptop should not have this kind of problem. I recommend to replace it for others (even the same model) to the place where you bought it.

• After uninstalling and reinstalling 42.0 FF, I get BSOD 0x000000F4 error

  FF has been excruciatingly slow and constantly crashed. I tried to reset, but does not solve the problem, so I did a uninstall and reinstall. Now, I get the BSOD every day, stating that "a process or thread crucial to system operation has unexpectedly released or terminated" and noting that the problem is often caused by the problem with newly installed hardware or software. FF is the only new software that I installed it. I have not installed new hardware. The stop error is always the same: 0x000000F4. Thanks for your suggestions you may have.

  Thanks for the suggestion, Kyle. I uninstalled and reinstalled FireFox and did not get a BSOD. It only 24 hours since I've done this, but so far, everything is fine. Thanks again!

• HP Pavilion g6-1232sl Notebook: error with Win7 and AMD Radeon HD 43 7400

  Hello

  After you have reinstalled Win7 64 on my HP Pavilion laptop 1232sl g6, I get error 43 with the AMD Radeeon HD 7400 Appliance.

  I have download and installed an update of the driver from the site of AMD, but this does not resolve the issue.

  Any suggestions?

  BTW, the reinstallation of Win7 the 'sleep' feature is no longer available (it is gray). Can it be related to error 43?

  Thank you

  Giovanni

  Hi@inascargio,

  Thank you for your response.  Yes, it is important to remove the existing drivers first and then restart the computer to make it work. Please try again and proceed exactly as I have laid out for you. As you already have the driver downloaded, you can omit the first step.

• HP-Pavilion Desktop PC recovery error MediaCentre

  Hello, my friend tried to install windows 7 Home premium on his PC, and now I'm trying to get the PC back to factory setting.

  I have the following desktop PC

  HP-Pavilion Desktop PC MediaCentre

  M8095a RZ557AA-ABG

  AUD716065V

  Windows Vista SP1 x 86

  The recovery partition is available and I am able to get into recovery mode, only problem after hp recovers then windows restarts and is supposed to desktop installation, I get an error

  The system registry contains invalid paths, the Installation cannot continue. This system image was applied without gauranteeing that correspond to computers drive letter assignments.

  is there a way to solve this problem and recover back to factory settings.

  CAN SOMEONE PLEASE?

  Thank you

  I solved the problem, if someone has this problem all you have to do is the following.

  I used a live Linux OS and booted the PC,

  I then chose live OS and started the OS

  I then opened the partition manager and deleted the partition of 100 MB Windows 7 creates

  Then, I deleted the partition to the OS and created a new partition NTFS

  so now the partition table looked exactly as it did with the original Vista operating system

  Then I restarted my PC and went into recovery and restore the PC back to factory default mode.

  the pc is now as it was, and I have to remove some unwanted junk hp and upgrade program to windows 7

  the last time I tried to create the recovery disk that the PC would not recognize one of my DVDs, I hope that I don't have the same problem this time.

• Pavilion 1066EZ M6: M6 Pavilion 1066EZ BSOD

  Hello

  I have a Pavilion M6 1066EZ. The question is sometimes, it freezes or gives BSOD.

  The strange thing is, he began to do this after it has been cleaned.

  I cleaned the fan and replaced the thermal paste with Gelīc GC Extreme 2.

  GPU temp on 7520G is 90 degrees Celsius idle

  GPU temp on 7670M does not at all.

  How is it possible for the GPU to APU having 90 degrees when the CPU itself has 40?

  I also checked the cooling system: all screws are well tightened correctly.

  I tried the activation and the deactivation of Crossfire and even set a profile to 'Maximize the battery life' but it doesn't seem to work.

  @UzY3L,

  Hello and thanks for posting back.  The reason why there can be a difference so close together is due to use of the tension.  The amount of doors and so forth that are operating on the chip.  Should be a detailed instruction in electronic engineering to break the functioning of each part and how it uses power.

  Graphics cards for most of them, according to what is happening on the screen can run several times harder than the cpu.

  I hope this helps.  If this isn't the case, you will need to search on the net about how gpu and cpu use power under different operations.  It will depend on the type of cpu and gpu.  As well as what is currently running on the system as well.

  I hope this helps.

  Thanks again and have a great day.

• Pavilion 6154ea: Radeon display error - display driver stopped responding and has recovered

  Received a UN expected error in the web search, actully screen off for a few seconds before receiving an error on the display driver stopped responding and recovery.

  Took a glance in the peripheral section where the 2nd adapter displays without any sign of error.

  After recently installing a new SDS moving from the HARD drive, reinstall windows 7 etc via the updates and the order to make recovery disc the laptop because I used receive a blue screen error frequently, so that the display driver does not not error occasionally when using the design programs.  Therefore assumed, needed a new HDD/SSD and factory restore.

  -Laptop computer has been cleaned withdrawal because keyboard, frame etc. with solvents as a cleaner. Therefore cannot be over heating the fan works hard to due and SSD.

  -Power supply has been connected to the time

  N ' was not overclocked as it is when using disk HARD aswell

  It wasn't until today where it happened again, without the blue screen though. So decided I would look at him and realized it is a common problem with the ATI drivers, when I assumed it was a HARD drive failure all along.

  This time the screen turned off for a few seconds, more then previously which is a little disturbing. Was only using a search engine with no program in the background. Infact havn't got round to reinstall files and software so the laptop is very clean and basic and works so don't know why I feel this fast.

  Need to know your opinion on this please, may not know... (Radeon HD 6490M)

  Thank you

  Hi @skibbles,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion dv7-6154ea Entertainment Notebook and problems with the display driver stopped responding. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. This resets the hardware parameters and contributed to others.

  Here is a link to test the material if you need it. It checks the pieces to see if something is a failure.

  Please let me know how it goes.

  Thank you.

• Pavilion dv6 3015sa: incomplete error on restore in recovery through recovery discs

  Hello

  I have a pavilion dv6 3015sa and since I bought it, I have the recovery disks. now I want to recover my original win 7 and its drivers with his records, (I have no installed win now) I go through its process and I put all 5 lights up disk in the drive and the recovery process. When it is finished with discs, asks me to remove last disk and click on continue (and I do)

  After this system charges with no disc in the drive, but after a few seconds it stops with this error: "Restoration incomplete" and it has 3 options which nobody works. but when I press RETRY its tells me insert recovery media and I insert it, it restarts, but comes back with the same error this time when I click on start AGAIN, he said "a file without a name is not found" no matter what disk I insert. I tried so many ways, but nobody is working, I did these things:

  1 wipe the entire disk with Paragon (and I formatted the disc after that) (shoudn't I format the drive after?)

  2. turn the defult Bios (my version of the bios is F.27)

  3. remove the disc quickly before restarting

  Please help me, what should I do?

  This question seems unsolvable!

  Thank you since it is a very strange problem, nobody answered me, I fixed it by the following process:
  1. I rewiped the entire disc and formatted, it
  2. I changed the date of the bios in 2012 and he's fine now I'm back to the original win 7, the performance of my pc now are really good and does not to overheat again and I rarely hear fan noise!

• BSOD no error checking for does not aspire VN7 - 792G

  Hello world

  I got my aspire VN7 - 792G (v17 nitro Black edition) since November 2015 and since last week, I was doing some odd BSOD bugcheck (0x000001d3) without errors. Using BlueScreenView I noticed that the error came from QCAMainx64.

  This happened last week and so I did a system restore and then updated my drivers wireless at 11.0.0.471. I've also updated my Nvidia drivers to the latest version in the case who had problems.

  I did a sfc scannow which gave rise to no error, I did a check of windows memory which gave rise to no problem and a disk check which resulted without any problem.

  The strangest thing was that the BSOD is produced especially when my laptop was being called in the upper left corner. But after a week of no BSOD they now returned at random moments.

  The first BSOD happened on cdrom.sys and netio.sys (also 0x000001d3) and then 2 other BSOD's happened (one while doing a system restore point) and the other so I just browsing youtube, which happened on the QCAMainx64 again.

  I left the Netherlands in Dubai and I left my receipt to the Netherlands, so I only have a scan of my warranty paper and ordering the product emails to prove that the laptop is mine. I was not able to repair yet because I need my laptop for work as well.

  I'll add my minidump files to this post. If anyone knows anything I might have missed or which is better I can do to avoid BSOD.

  I am running Windows 8.1. It seems that, on the acer site, that I can not download more updates to driver for windows 8.1 because they offer only win 10. And I'd rather not updated for windows 10 in all.

  Thank you for your time.

  http://www.filedropper.com/desktop_27

  Try to update the driver with this version:

  http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=FileInfo&ID=2011&lang...

  Click Download, double-click the auto unpacking package and look for a configuration or install the file.

  Web site is 100% reliable.

  have an update on nvidia drivers too:

  http://www.GeForce.com/drivers/results/99508

• BSOD (Stop error) on commissioning. Help, please!

  Stop 0x0000000A (0x00000002, 0x00000001, 0x00000000, 0x804DC11D)
  IRQL_Less_or_Equal

  First time this has happened only a few days ago. I had Windows XP Edition SP3 family.

  I could not understand the problem and eventually reformat my C: drive and everything seemed fine. Then suddenly alluva the error again.

  It begins one minute after I connect to my office, then after that I have to the windows startup screen and he mistakes for the BSOD.

  Each time, it's the exact same error, so I don't know it's coming from the same source. And I don't know how it would be a virus that I have a virus scanner. All I hope is that this is something I can fix it for a few months without constantly reformatting or wipe my D: drive as there are things there I need and don't want to spend a whole day backup stuff.

  An overview of this problem would be appreciated. And I can't log in to get a minidump. The stop error is all what I have.

  I checked the PCI (my gfx and 2 wireless cards) cards by taking out them and the problem persists. I also checked the RAM sticks last time it happened by removing one and try. the problem persisted. I think it may be the motherboard or hard drive related... which I am dreading.

  --------------------------------------------------------------------------------

  >.

  I googled and found this... Sorry if I'm not allowed to post outside links, but I'm 99% positive it's that one. Laughing out loud.

  http://www.ascendtech.us/ITEMDESC.asp?IC=MB4DELDIMEN3000

  Heck. It's so much more enjoyable when things are easy. ;-) Well, since you have reinstalled Windows make sure you have installed the updated for all your hardware drivers. You won't get the since the Dell for your Dell Dimension 3000 website. The best way to do is to enter your Service tag in the Dell support page.

  Once you have installed the updated drivers (and don't forget Desktop Software from Dell if this model has), if the problem recurs, then you for lack of material. Just get out the bits and putting them again - then it won't do not a complete waste of time. You need solve the material problems systematically. Dell has diagnostics which reach you by pressing F12 when the computer starts. You will see the start of the diagnostic utility option. Run full diagnostics on everything. It takes some time. If all goes, I would always test the RAM with Memtest86 +. We have seen many machines that passed the Dell diagnostics, but which had hardware problems. However, if the diagnostics show failures don't bother. Replace defective components.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  One thing to note - it is an old machine. If the motherboard is the bad part, it's time to just buy a new computer. It will be uneconomic to put hundreds of dollars into this old machine. Wait next week and buy a new Dell running Windows 7. MS - MVP - Elephant Boy computers - don't panic!

• BSOD 0x000000D1 Error.

  Original title: several BSOD and not the more Tech savvy person.

  I installed a new processor a few days ago an am3 + FX 6350 6 core and I had problem after problem with drivers and other things.

  I get

  0x000000D1 with RTLH64.sys

  0x0000000A IQRL_Not_Less_Or_Equal

  I've been reading around for awhile now and I need to show you my error logs, but I don't know how.

  Someone would ask me what to do?

  Thank you!

  The attached kernel dump file is IRQL_NOT_LESS_OR_EQUAL (a) bug check.

  This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  --------------------

  1. AsrAppCharger.sys is listed and which is ASRock App Charger, very known to cause BSOD. Uninstall as soon as possible.

  2 remove and replace AVG with Microsoft Security Essentials for purposes of troubleshooting temporary, as it is most likely cause conflicts:

  -AVG removal http://www.Avg.com/us-en/utilities

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  Kind regards

  Patrick