BSOD when I install Kaspersky Security Total

Similar Questions

• Error code 0 x 80070008 when you install the security update in Windows XP

  installation failed for the security update for Windows XP (KB2705219), reason given is 0 x 80070008.  "Mr Fixit" has not as well.  Help?

  Hello

  These errors can be caused by one of the following problems:

  ·         Programs or processes that interfere with Internet communications

  ·         Problems of computer resources

  ·         Strong Internet activity

  ·         Recoverable database errors

   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.

• Impossible to install Kaspersky 2014

  When I install kaspersky 2014 it asks for a restart mentioning that "installation will continue after the reboot" after I rebooted my pc the installation continues but to halfway through she stops and gives the same message again.

  I restarted my pc about six times, but he gave me the same message.

  Can you please give me a solution.

  Hello

  I suggest you contact Kaspersky Support in this case:

  http://USA.Kaspersky.com/support?0

  Or via this link:

  http://support.Kaspersky.com/

  And here is a list of the Kaspersky Forums:

  http://Forum.Kaspersky.com/

  One thing I would mention is that, before you install an Antivirus program, you make sure that any Antivirus program is already installed on your machine is completely uninstalled, expired same subscription or trial ones.

  See you soon.

• Internet does not connect after installing Kaspersky Pure 3.0

  I use 32 bit win8. I installed Kaspersky Pure 3.0. After that, I can't connect to the internet. Before the installation, I was able to connect. My widows firewall is turned off. I tried to make a break disable firewall and protection, but it did not help. What should I do?

  ART

  IF it broke when you instaled Kaspersky attachment to remove Kaspersky do not turn off.

• Error 1722 when installing Kaspersky Internet Security

  I'm trying to uninstall Kaspersky PURE 2.0 in order to install Kaspersky Internet Security. I have Windows 7 Home Premium operating system. During the uninstall process, my computer hangs when removing the drivers. I click Cancel and you receive this error message:

  Error 1722. There is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact Technical Support or the vendor of the package. Action
  DeleteDriversx64.330C26E4_9D96_45DE_8DE8_FAB177773E5C, location: C:\Program Files (x86)\...\DrvInstaller.exe, command: / sup: {8C28AA9B-9756-4AD5-8F9F-82C8B7C9AC4B})
  I searched through this forum and am not able to find anything that helps. However, most of the display associated with error 1722 are old enough. What is a Windows problem or something related to my Kaspersky?
  Nicely,
  Andrews1of5

  Hi Andrews,

  This problem is related to Kaspersky and the error can be caused by an incorrect installation of the system driver klim.sys.

  I suggest to see the help link and check if it makes a difference.

  http://support.Kaspersky.com/Kolt?Eid=207694009

  If the problem persists, contact the Forums of the Kaspersky Support better.

  http://Forum.Kaspersky.com/

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• BSOD when trying to install Win7 64 bit with the new motherboard

  Hi all

  I have the following BSOD problem:
  I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.

  Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.

  My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)

  I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.

  If you have any suggestions, please, don't keep it to yourself :-D

  Thank you!
  Alex

  Hello

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ==============================================

  References to Vista also apply to Windows 7.

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  General troubleshooting BlueScreen to use with the methods above.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• Re: Satellite L300-1AP BSOD when installing Windows XP

  I have a new L300-1AP and would like to intall XP Pro but when I try it I get the stop message 0x0000007b.

  Made a new installation disc integrated with all updated sata drivers, I still get the message. I'm not sure about how I would install drivers of third party on the F6 function because it has not a diskette and cany to find how to do the same thing in a CD anywere.

  I appreciate that we should all try to use the vista OS that came with it, but it is a problem of compatibility with older software that I use.

  Can anyone help please?

  In the Microsoft Knowledge Base is an article about it:
  http://support.Microsoft.com/?scid=kb%3ben-us%3B324103&x=17&y=8

  I think that there is something wrong with the SATA drivers. My Satellite L300 works with XP without problems or BSOD when installing.

  The SATA drivers are in this package, and the Intel Storage Manager you can download on the Toshiba site.
  You can create your own installation with nLite (http://www.nliteos.com/) disc.
  If I have integrated the SATA drivers, you do not have to press F6. The HARD drive will be automatically recognized.

• Satellite L510 - BSOD when you try to install Windows XP SP2

  I have a Satellite L510 purcahsed with Vista home premium, but when I try to install XP Professional it screens just as it tries to start windows and blue right after the installation of the part of pilots to the beginin.

  Anyone has an idea why this would happen?

  Thank you very much

  Hello

  I m a bit confused now... When you get exactly the BSOD? After complete installation of Windows or after that?
  By the way: BSOD code what you get exactly?

  I often read on codes of BSOD when installing XP so I guess that you didn't use the correct driver SATA. You need the Storage Manager to properly install Windows and you can find this driver on the Toshiba site.

  By the way: you can also use the forum search to find similar topics.

• I have already installed Kaspersky Internet security and my laptop shows install antivirus protection what can I do?

  I have already installed Kaspersky Internet security and my laptop shows install antivirus protection what can I do? Remove KIS and then install antivirus software for my laptop or updating is necessary? Please answer

  Please see if it is relevant and helps:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-security/anti-virus/6784f312-b46c-4299-a040-a05ea07eaecc .

• Why (Preview Developer 64-bit windows) prevent Kaspersky 2012 to install internet security

  Why (Preview Developer 64-bit windows) prevent Kaspersky 2012 to install internet security...

  First of all, this forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Secondly, this is not the place to ask questions about WIndows 8 Developer Preview.

  Some likely forums are:
  http://social.msdn.Microsoft.com/forums/en-us/category/windowsapps
  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads
  http://social.msdn.Microsoft.com/forums/en-us/category/windowsdesktopdev

• I try to install kaspersky internet security, but cannot completely uninstall mcafee

  original title: software spies kaspersky

  I try to install kaspersky internet security 2011 installation you should remove all the other anti-spyware... I can't completely be deletet mcafee... I tried several times to add/remove... any suggestions

  Visit the McAfee Web site and find their removal tool.

• Windows error has encountered a critical problem and will restart automaticlaly in one minute. Please save your work now, when you try to install Microsoft Security Essential

  Original title: pc restart continually saying met windows critical problem after installing microsoft security databases

  Had problems with windows firewall and Defender does not.  Removed protector virus blank media like this firewall did not work either. Tried the Fix 4 her.  Still would not work.  Then tried to install Microsoft Security Essentials.  Rang scan and it restarted the pc and I am now in a loop that says "Windows has encountered a critical problem and will restart automaticlaly in one minute. Please save your work now. "Then, it closed its doors, restarts and the same message appears.  A also say-connected on the internet also. Help please...

  Hello

  1. who were the fix - it, you've tried?

  2. were you able to successfully install other programs on your computer before this problem?

  3. What is the error you received when the Windows Firewall and defender did not work on your computer?

  4. you have made no changes to the computer before this problem?

  First of all, you must disable the auto reboot system error and then we can check if the problem exists in safe mode or not.

  Method 1.

  Step 1. Disable automatic reboot to avoid unwanted restarts on system failure.

  a. when your computer starts up keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  b. now, use the arrow keys, select Disable automatic restart in case of system error and press ENTER.

  Step 2:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 3:

  If the computer works properly in safe mode, then you can perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  You can try to uninstall completely, and then re - install Microsoft Security Essentials and check.

  You can run the fix - it from the link next.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  Post back with the results for you help more.

• I get the 0x800b010b error when you try to install kb2542054 (security fix for ms-visual studio 2010 express)

  I am running windows xp sp3 on a dell dimension and update of windows is unable to install the security patch kb2542054.  Any suggestions on how to fix this?

  Thank you-PaulRRR

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Error when installing Microsoft Security Essentials

  I followed the instructions and I tried to install Microsoft Security Essentials in the Office from my PC, but without success. At the end of the process appeared a tag with "error code: 0 x 80070643. What can I do?

  Microsoft Security Essentials questions should be directed to the MSE Forums:

  http://social.answers.Microsoft.com/forums/en-us/msestart/threads

  Installation and upgrade of Microsoft Security Essentials program Forum at the link above.

  See you soon.

  Mick Murphy - Microsoft partner