BT has disappeared and not install it on the Satellite A100-847

Hello

before 3-4 days, I changed my dvd - rom with a new because it worked not and after a few hours, I saw that the bluetooth icon is red (the bluetooth does not), but it has been turned on... (bluetooth is INTEGRATED, I'm using the toshiba bluetooth stack and I'm with Windows Vista 32-bit)

I tried to turn on and off and he disappeared completely even from the Control Panel, and so on.
I tried to reinstall the drivers, but it gets stuck in the window installation of drivers and what he shows me an icon of a key usb with this http://s10.photobucket.com/albums/a103/H34oBeK/?action=view¤t=bluetooth.jpg message

It says that the usb device is faulty... and it's every time when I try to install the drivers or switch button wireless and bluetooth-> power

I even reinstalled Windows and the same problem...

You have any ideas?

Please help :)

I found the following in the post:

http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=133803𠪫
--------------------------------------------------------------------------------------------------------------------------------------------
The "Bluetooth ACPI" device is listed in the "System devices" section of the Device Manager?

If this isn't the case, then no Bluetooth module is attached to the motherboard. It's may be unplugged if it worked before.

If so, check your antenna switch of your laptop if it is really running material.
Normally, a LED lights to indicate that it.
Press + and select again the Bluetooth antenna.
Right mouse click on the bluetooth system tray icon and select 'enable the Bluetooth radio '.
If nothing works, then I guess that:

* already installed another battery Bluetooth using the bluetooth module or
* your bluetooth module has loosen or is damaged.
--------------------------------------------------------------------------------------------------------------------------------------------

Tags: Toshiba

Similar Questions

  • My "Send" button has disappeared and my address list on the left side also disappeared. How to recover these items?

    I've never had a problem sending & or receive e-mail before these days. All of a sudden the Send button has disappeared and my address list on the left side also disappeared.
    I find help that suggests the opening of Scripture and then press F9 to retrieve the list of addresses. The list of addresses returned on the left, but did not appear as he used to say. the length of the screen. What is however now it will be satisfactory. The button 'send' is still missing which is frustrating because I was not able to send emails for about a week now.
    Would appreciate advice on how to recover the above.
    Thank you.

    Open a window of writing.
    Do you have the toolbar of Composition with Send-spelling-Attach, etc?
    Otherwise go to the Menu bar and select display-toolbars and turn it back on.
    If you are also missing the bar of menus with top view, press the alt key to display, and then turn on the missing toolbars.

    If you have some of the bar Composition tools but lack just the Send button, click with the right button on the toolbar and select Customize. Find the button send in the dialog box that opens, and he reglisser in place.

  • Bluetooth does not work anymore on the Satellite A100-683

    Hello

    I'm new to this forum. I am from the Netherlands so my English may be a bit poor. Sorry about that.

    The problem:

    In 2006, I bought a laptop Toshiba Satellite A100-683 9. It has integrated Bluetooth, a good processor and 1 GB of RAM. It works great, even bluetooth. A week ago stopped working Bluetooth.

    Device Manager, reinstall the drivers, the recovery cd, ConfigFree, tried everything without success. No Bluetooth. The laptop has a chip integrated Bluetooth 2.0. It works, but not now. Boats a year ago, because he has "one year warranty".

    Is there anything I can try to fix the Bluetooth?

    http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking

  • How to get and replace a key on the Satellite A100-522?

    Hey, Toshiba.

    I have a Toshiba Satellite A100-522 model No. PSAA2E-01C01EED and one of my shift keys
    has broken below, so I can't use it (the small plastic bar to balance the key is broken
    If the key "blockages". Can I send it for repair to the warranty, and Ive talked to the
    seller, but I don't have the time to send it for repair (no laptop replacement in the meantime).

    Is it possible to get a new key and replace it myself? I know that some other laptop producers do the same thing,
    rather than use a lot of time on repairs, if they are too simple.

    Concerning

    John Reyes

    [email protected]

    Hello

    Well, it's very easy to replace the keys.
    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20727&MessageID=76283

    But if the key is broken you will need to replace the entire keyboard.
    To remove the keyboard, you have to remove the cover plastic thinking above the F keys.
    Under this coverage, you will find 2 crews secure the keyboard
    Remove the two screws and remove the cable from the flat keyboard which is connected to the motherboard.

  • HP Pro slate 8: HP Pro slate 8 (K7X61AA) - OTA upgrade has failed and not able to apply the HP upgrade.zip

    Last week, I received the tablet. Since then, the OTA update failed 3 times. So I searched around the Web and found a page which State to load the update.zip to SD card and install on recovery Menu:

    http://h30434.www3.HP.com/T5/Android/Pro-slate-8-updates/TD-p/5224651

    But it does not work also. After the system says 'check' package it briefly shows the Android Robot for less then half a second that an i will be back to the Recovery menu.

    Allocation of resources.

    Thanks D.

    Solved by myself.

    The upgrade from SD card did not work, because the tablet had a problem with my SD 32 GB Class10 card. I used an 8 GB Class 4 and it worked fine.

  • Can not install Vista on my Satellite A100-529 display driver

    Hello

    I downloaded the ATI from the download page of Vista driver but it won't install - it goes through the installation process, but in the end gives an error message. At the bottom of the journal is: -.

    Error messages
    Driver installation: installation failed
    Installation of the application: failure

    What to do now? The Vista driver, I cannot activate my SVideo out which is really annoying.

    Thanks for any idea!

    Hello

    For most error messages appear because something was wrong during the installation procedure.
    This could be caused by the use of evil, graphic driver is not compatible.

    Are you sure you used the right graphics driver?
    Choose the drivers developed for the series of satellites PSAA2 because the A100-529 belongs to this series of laptop.

    The Toshiba page offers a version 8.31.100.3.2 - 06112 ATI graphics driver.
    You must install this!

    I myself remember that this device was not delivered with Windows Vista but with Windows XP Home version. So I guess you did something wrong during the installation of the Vista driver.

    Are you using the latest version of the BIOS? Please check and if necessary try to update.
    But be careful!
    Make sure you use the good BIOS and the method of updating the BIOS.

  • Synaptics touchpad is not working properly on the Satellite A100-635

    My synaptics touchpad is not working properly my mouse works very well but does not work in every corner of the touchpad for special functions.

    I tried to set it up again but it had no result, also I downloaded a new driver, but it had no results to. My buttons multimedia keys like play/pause or stop are not no longer works.

    These buttons/keys stopped working at the same time as the touchpad. Checked with NOD 32 pro virus and spyware with ZA pro ==> no results.

    Who can help me with this problem?

    Hi Jarno

    Do you know how many different Satellite notebooks have a series? Drivers and tools are not the same for each of them. Because of this you should also tell us that you have.

    According to your description, I can tell you: install OS using support and recovery delivered with factory settings, your mobile phone must be configured correctly.

  • Re: Fan out and how to change on the Satellite A100-309?

    Hello

    My fan no longer works.
    Is that someone has already changed? Is how easy it?
    I can't find the model of fan of the product specifications. Where can I find the template?

    Thanks a lot for your help

    Hello

    It of a bit more difficult to change the fan on laptops and on that. I think this should be done by a technician laptop because you should remove it many screws.

    In your case I would visit the closest authorized service provider. They can order a new fan and Exchange.
    It would be the easiest way for you.

    Welcome them

  • Problem on Satellite A100-847 - printer and scanner USB do not work

    Hello

    Both of my printer and my scanner genius works fine on my PC but when I the connected to the satellite A100-847, it seems that there is not!

    Even the mistakes no. USB and two of them are on, plug unplug turn change anything.

    Known that I have installed the driver on the CD, but still no printer no scanner?

    Gives me headache is that the USB mouse works fine?

    One last thing after having this problem, I tried to update the BIOS thing but nothing change

    Hello

    Your laptop preinstalled with comes a recovery DVD?

  • I use LR on a mac. By developing her photographs, the sliders on the right side - exposure, contrast, shading has disappeared and I am not able to bring them back. That I switch to get them back?

    I use LR on a mac. By developing her photographs, the sliders on the right side - exposure, contrast, shading has disappeared and I am not able to bring them back. That I switch to get them back?

    Control-click on one of the other section in the develop Panel headers (curve tone, Split Toning, retail etc.).  This opens a menu that allow you to re - select this option to display the base Panel you've lost.

  • I noticed that my user name in the C drive has disappeared and is displayed under the desk

    original title: save files on the net / backup of the files in the C drive

    These 20 to 30 days, I noticed that my user name in the C drive has disappeared and is displayed under the desk. In addition, whenever I try to save a file on the net on my laptop, this allows me to record only at this location:

    C:\Users\vijai\AppData\Local\Microsoft\Windows\Temporary Internet Files\Virtualized\C\Users\vijai\Documents

    Also in the Solution Explorer, while all other folders category, like documents, pictures, music etc appear in the left panel, these do not appear in the right panel. I also note that a "Application Data" folder appeared under my user name and all files stored in this folder only.

    Can someone help me solve this problem

    Hi, VIJAIRAGHAVANP V,.

    You can try the following steps and check.

    Method 1:

    You can try a system restore to a prior restore point before you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Method 2:

    If you are still facing problems then try creating a new user account and check if the problem occurs:

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    If you are not faced with any issue, then check out the following link to correct a damaged account.

    Fix a corrupted user profile:

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Hope this information helps.

  • user account - main 'administrator' acct has disappeared and I can't access my documents 'admin '.

    main account under XP pro since always 'administrator' put in place a new Admin account in Control Panel with the intention of transferring files in it, because I could not rename the original

    no other action - now since a restarted a few days later the Admin log you / account has disappeared and when I try to access the documents 'administrators' to the new user account with administrator privileges I get a message 'not available' - I NEED these files because they contain files of accounting for our local charity and supported last a disk separate until 3 weeks ago GULP!

    Hi Michaelthetruck,

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you try the steps in the Microsoft Knowledge Base article and check.

    "Access denied" error message when you try to open a folder

    http://support.Microsoft.com/kb/810881

     

    Method 2: You can also take the owner of the file/folder, to steps, consult the following article:

     

    How to capture a file or a folder in Windows XP

    http://support.Microsoft.com/kb/308421

    Let us know if that helps.

  • Since some recent updates the language icon has disappeared and I can't find a way to restore.

    Original title: additional language problem

    I have been using the English and Russian languages on my laptop that I could choose out of an icon in the taskbar which read IN or RU according to the language used. Since some recent updates, this icon has disappeared and I can't find a way to restore. All proposals/solutions would be welcome.

    I have been using the English and Russian languages on my laptop that I could choose out of an icon in the taskbar which read IN or RU according to the language used. Since some recent updates, this icon has disappeared and I can't find a way to restore. All proposals/solutions would be welcome.

    Hello

    See the following article to support the display of the language bar.

    The language bar (overview):

    http://Windows.Microsoft.com/en-us/Windows/language-bar-overview#1TC=Windows-7

    If it does not, see the previous question.

    Language bar missing from the taskbar:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/language-bar-missing-from-taskbar/bbff6b32-e4f6-4237-b4d3-255a067c2bf2

    Concerning

  • The button send on my MacBookPro has disappeared and I can't send emails on this device, but I can send it on my iPhone 6. I just upgraded to El Capitan

    The button 'Send' on my Mac Book Pro has disappeared and I can't send him. Other devices on the same WiFi have their buttons send and can send messages. I can also send mails on my iPhone6Plus. So, it doesn't seem to be a problem with the supplier or the connection. I've recently updated to El Capitan. That's happened? How can I get the back button?

    Ski6ta,

    Same question as Re: cannot send email... Maybe this will help.

  • On my acer v3 - 112 p my store has disappeared and many windows 10 apps like messages and Grove

    On my acer v3 - 112 p my store has disappeared and many windows 10 apps like messages and Grove

    v3 - 112 p

    I fixed it I have repatly used windows restore image until it crashed the system store and reset itself and nows its fine

Maybe you are looking for

  • If you use firefox for linux, I'm unable to open the game client for a called flash browser game darkorbit.

    I'm using Linux Mint 17.2 xfce.The Firefox I use is 42.0 Mozilla Firefox for Linux Mint Mint - 1.0.Shockwave Flash is 11.2r202.The browser Flash game is DarkOrbit ( www.darkorbit.com ).The game was working fine until about 2 months ago. I log in the

  • E partner store not shown Windows 8

    HelloI have Toshiba Store E partner 500 GB USB3 backward compatible USB2. When I plug into USB 3 port it is not displayed in my computer when I plug in USB2 it shows. I have Western Digital USB3/USB2 everything works very well. My motherboard is Giga

  • Install the LabVIEW DSP Module on Labview 2009 Professional

    I have LabVIEW 2009 professional and I try to install the LabVIEW DSP Module on it. I have LabVIEW DSP Module 8.6, and I think that this is the final version. However, when I tried to install it, it says you should have LabVIEW 8.6 on your system. Wh

  • Task Scheduler in Windows Server 2008 Enterprise Edition

    We have Windows Server 2008 Enterprise Edition by using the Task Scheduler to run 4 tasks on a daily basis. Recently, we have applied the Microsoft updates and restarted the server, and now the scheduled tasks do not work with the field. It says logo

  • Configuration of voltage and resistance 34970

    Hi, I use LabView 2011 with Agilent 34972 A. I use the driver 34970 and I measure temperature (resistance) on ch 101-103 and tensions on ch 104-107. When I run the present and 104-107 channel is open, I had a false reading voltage about 2, 7V to ch10