Bucket 0x9F_3_POWER_DOWN_IMAGE_athr.sys of error, type 0

Similar Questions

• Bucket 0x9F_3_IMAGE_Rtlh86.sys of error, type 0

  Every morning, I find that my computer suffered a "unexpected stop" and I have to restart. "Problem reports" and Solutions seem to think it's a problem of Ethernet network. My (home) network is a wired LAN, the adapter a Realtek RTL8168C/8111C Family PCI - E Gigabit Ethernet NIC (NDIS 6.0). All my drivers are up to date, network and sharing Center 'Diagnose and fix' is no problem.

  The problem seemed to start shortly after that I turned on my wireless adapter (USB wireless 802. 11 b/g adapter) to test a separate WLAN network we have in the House for the use of our clients. I signed into the network and seized the key. Find the WIFI worked, I disabled the wireless adapter and then plugged the ethernet cable back in. My computer myself connected then back to our wired LAN, and this seems to work very well.

  One thing that may or may not be related: one morning, I found that my screen resolution has changed, certainly not something I did.

  Thanks in advance for any help and suggestions,

  DocBillAdams

  Hello

  Perform a clean boot and check if a service or application is causing a conflict for the problem to occur. Check out the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

• Fault bucket 0xD1_athr + 4988 BlueScreen has, type 0

  I have a C771US of Hewlett Compaq with windows Vista on it. In a month I get the blue screen error message: bucket 0xD1_athr + 4988 a error, type 0. I don't know what to do. The drivers are all up to date on my laptop, and I had to disable my adapter wireless for an Ethernet cable. Does anyone have any suggestions?

  Hi Jennifer,.

  In Device Manager, you can check for the network card and expand the same thing to check for the drivers listed.

  If you see the card listed wireless, then follow these steps to uninstall and reinstall the same.

• "Error-type in" features on HTTP/FTP/SMTP screw close?

  This is one for the developers of NEITHER, or maybe people of help documentation.  I noticed before, but never had time to questioning officially it.

  The screws 'close' in the libraries of the project LabVIEWSMTPClient, LabVIEWHTTPClient and NI_FTP indicates that they "error-type in ' features, unlike most of the primitives 'close' for TCP, UDP, BT, DS, and even the VI 'close' in the library of NI_WebDAV, which States that they fulfill their function even in the presence of an error in incoming.  What seems inconsistent.  These Protocol libraries ignore the usual mechanisms of closing / prepared if "error in" is set to true, or is the incorrect documentation?

  Dave

  The documentation is incorrect... all three of these narrow screws (SMTP, HTTP, and FTP) release properly resources regardless of the value of the error in the terminal.

  Jonathan, please drop a CAR documentation on this issue.

• command-line option syntax error type command /? help

  Whenever I have try and download updates, the following message is displayed with a ' syntax error type command-line option command /? help "but when I type the?" / key nothing happens?

  I had the same problem, even in the guidelines recommended by microsoft, faild, but I solved it

  go to google and put

  Download (pilot saw issue and the version of the driver) and download it manually on sony.com and install good luck

• Error type 2002300

  Hello.  I have my program works quite well in labview but when I build it, I'm having a problem.  In bed software (exe), one of my screws will not work.  Everything else works well.  When I opened the front, it has a broken arrow and if I press it, I get "Error Type 2002300" and he tells me that I need the complete development system.  This forum works on the same computer that it was built.  I've tried Ctrl-Shift-Run and has not solved the problem.

  If I build just this particular VI separately, it works, but overall the program is not.

  It is one of the simplest screws in this software.  It uses no external driver (IMAQ or DAQmx).  It has a structure of the event and writes data in a queue, but it is about as fancy as it gets.

  It is run (or rather must be executed) using the runVI invoke the node, but are so a number other screws in this application, and they all work very well.  I tried the two which he and including not not as a dynamic construction VI and it doesn't seem to matter.

  What does the error Type 2002300?  I can't find what he referred to in the help or here.

  Thank you

  Greg

  OK, I got it.

  This VI who has not raced is in a Sub library with the same name as another secondary library from another library.  I changed the name, and now it works.  I don't know if that was the problem or if the change in name has prompted some re-binder that does the job.  Hope this post helps someone someday.

  Greg

• Update SP2 from 2003 to 2008 Std - update, due to lack of InstallWindows:Error Type = 3211266

  Hello

  Really struggling with an upgrade from 2003 SP2 Std 2008, it's a PC that is inherited. Installation goes completely to 100% then says failed and will return in 2003 again.

  Logfile below. -anyone any ideas please? and thanks for looking.

  2016-04-14 18:43:56, error [0x08081e] MIG could not load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 18:48:31, [0x08071d] MIG CDownlevelOCStore::GetOCCollection error, failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man. : Class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 18:48:43, error [0x08081e] MIG could not load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 19:07:49, error [0x06015d] IBS EnumVdsDisksCallback: found the disk with an invalid name. [gle = 0x000036b7]
  2016-04-14 19:08:01, error [0x06015d] IBS EnumVdsDisksCallback: found the disk with an invalid name. [gle = 0x000036b7]
  2016-04-14 19:22:53, error [0 x 080792] MIG COCEventTracing::COCEventTracing call failed StartTrace 87. [gle = 0 x 00000057]
  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:13:49, error [0x0802b6] MIG could not create object: HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:13:49, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\InternetShortcut\shell]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\InternetShortcut\shell\print\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell\print\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:26, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\InternetShortcut\shell\printto\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell\printto\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [] HKLM\SOFTWARE\Classes\InternetShortcut\shellex\ContextMenuHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8}. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shellex\ContextMenuHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8} []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [] HKLM\SOFTWARE\Classes\InternetShortcut\shellex\PropertySheetHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8}. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shellex\PropertySheetHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8} []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:54, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\XML\OLEScript]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\XML\OLEScript []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [comdlg32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [comdlg32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [imagehlp]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [imagehlp]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [lz32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [lz32]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [oleaut32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [oleaut32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecli32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecli32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecnv32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecnv32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olesvr32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olesvr32]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [shell32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [shell32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [url]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [url]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [urlmon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [urlmon]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [version]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [version]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wininet]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wininet]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wldap32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wldap32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64cpu]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64cpu]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64win]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64win]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:22:01, error [0x08030a] MIG MigDoMigration caught exception: class UnBCL::ArgumentOutOfRangeException: startIndex and rank value.
  __thiscall UnBCL::String:String(const_unsigned_short_*,int,int)
  [gle = 0x000003f0]

  ______________________________

  Other end of log file

  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. E:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. F:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. G:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. H:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. I:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, stop Info [0 x 080279] complete MIG of the file system manager in place.
  2016-04-14 20:22:16, mapping of information [0x0803e6] removal of MIG for HKLM
  2016-04-14 20:22:16, info [0x0803e7] MIG successfully unmapped HKLM
  2016-04-14 20:22:16, mapping Info [0x0803e6] removal of MIG for HKU
  2016-04-14 20:22:16, info [0x0803e7] MIG successfully unmapped HKU
  2016-04-14 20:22:16, the analysis service of information [0 x 080487] MIG destroying BONE
  2016-04-14 20:22:16, the analysis of information [0 x 080488] destroyed MIG OS service
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xc08].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x3f0].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xdb4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xe68].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xe5c].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xcdc].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xcd4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xeec].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0xef0] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0 x 348].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xa40].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xbe4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 220] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x90c].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 870] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xdf4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 924] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xbc4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0x1ac] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x92c].
  2016-04-14 20:22:16, COutOfProcPluginFactory::FreeSurrogateHost MIG Info: stopping.
  2016-04-14 20:22:16, MigHost MIG Info: process exit.
  2016-04-14 20:22:16, Info [0x0804ae] MIG CMigWorkingDirHelper: removal of C:\$UPGRADE.~OS\OnlineUpgradeApplyWork working directory
  2016-04-14 20:22:16, method of information leaving MigShutDown
  2016-04-14 20:22:16, info [0x08008d] MIG migrate: Finish (0)
  2016-04-14 20:22:16, WARNING [0x08076e] MIG UpgApply: (C:\$UPGRADE.~OS\OnlineUpgradeStore) restore did not complete successfully
  2016-04-14 20:22:16, info [0x08059e] MIG leaving Callback_ApplyNewSysMachineSpecific (failure)
  2016-04-14 20:22:16, PublishCriticalError MIG Info: Windows Setup has encountered an error and cannot continue.  Your computer will now reboot and your previous version of Windows is restored.
  2016-04-14 20:22:16, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2016-04-14 20:22:16, current user interface pages and destination Info [0x0a013e] are the same. Judgment of navigation.
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070042]: called with the notification of error published by ErrorHandler
  2016-04-14 20:45:12, info [0x0a0023] run UI ProgressInfo\SendDiagnostics task: StartProgress
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info: Phase = 4 start time was 0X30D2073BA, end time was 0X30D208448, total was 0X108E
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070044]: startSetupTimeInSecs = 0X30D2072BA
  2016-04-14 20:45:12, info [0 x 070045] DIAG diagnosis treatment given to the 2016-04-14 20:45:12
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070046]: endSetupTimeInSecs = 0X30D209258
  2016-04-14 20:45:12, DIAG CallBack_DiagnosticDataSend info: setupInstallTime = 0X1F9E
  2016-04-14 20:45:12, DIAG CallBack_DiagnosticDataSend info: the user is NOT ACCREDITED-IN M² and Watson.
  2016-04-14 20:45:12, info [0x0a0024] run UI ProgressInfo\SendDiagnostics task: EndProgress
  2016-04-14 20:45:12, info [0 x 090095] PANTHR called WdsExitImmediate!  The execution stops and the queue will not be saved.
  2016 04-14 20:45:12, info [0x09008c] PANTHR SeqExecute - stop, since WdsExitImmediate() has been called
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: SkuAssembly (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MigTestPlugin (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ErrorHandler (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MountDev (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: internal (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: BootIni (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CopyPrivates (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CreatePageFile (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: completion (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: RestartModule (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ParseCommandLine (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineSettings (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: WpeUntndBtstrp (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ModuleLoader (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Ems (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DiskInformation (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: license (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: LanguagePack (SEQ1)
  2016-04-14 20:45:12, info [0x0605a6] IBS requested UI to hide pages selection of language and regional settings.
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: space (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: locale (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineUI (SEQ1)
  2016-04-14 20:45:12, CallbackWin32UITerminate of the user interface of information: deleted WizardUI
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Cmi (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Sysprep (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ProductKey (SEQ1)
  2016-04-14 20:45:12, IBS Info [0x06010d] Module_Term_Productkey: the valid product key in the table, see the property hide the value.
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: CBS (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DynamicUpdate (SEQ1)
  2016-04-14 20:45:12, info [0x0500bd] of THE Module_Term_DU called
  2016-04-14 20:45:12, info [0 x 050081] of THE WaitAndCleanUp of THE...
  2016-04-14 20:45:12, info [0x0500a1] OF THE fact with THE... DUMgr cleaning
  2016-04-14 20:45:12, info [0 x 050082] with WaitAndCleanUp BECAUSE of THE...
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: LogTime (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Unattend (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: UnattendImgInstall (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CFGOfflineImage (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ExternalDrivers (SEQ1)
  2016-04-14 20:45:12, info [0 x 090062] PANTHR destroying module: module IBS PnP (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: SystemRestore (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ConfigSet (SEQ1)
  2016-04-14 20:45:12, info [0 x 090062] PANTHR destroying module: Source (SEQ1) media module
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Imaging (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MSDCleanup (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CopySetupFiles (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ComputerName (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ScenarioDetect (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: engine (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: compliance (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: diagnosis (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: BootPrep (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DiskConfig (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: TempDrive (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: FixBBPaths (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: FirstBootCleanup (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Rollback (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: UpgDriver (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: PrepareInstallDrive (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineProgress (SEQ1)
  2016-04-14 20:45:12, info [0 x 090081] PANTHR destroying any source not cited modules! (SEQ6)
  2016-04-14 20:45:12, info [0x0601d7] IBS InstallWindows:Error Type = 3211266
  2016-04-14 20:45:15, info [0 x 090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Impossible to upgrade Edition Vista Home premium to Windows 7 Home premium. I get an error type of 3211266.

  Yes, I know, I'm a little late.  Vista works fine on my PC and now some third-party vendors are abandoning support of this platform, so I'll try to upgrade to Windows 7 to get a mileage more than my PC until I have to replace it.  I ran the Windows 7 Upgrade Advisor and he said I could upgrade to Windows 7 Home Premium.  It works fine for a few hours, then stops in a few words about the 75% mark in the part "Transfer files, settings and programs" of the upgrade and I get the message - "the installation cannot continue.  "Your computer will now reboot and that your previous version of Windows will be restored.  The good news is that the restoration has worked flawlessly.

  I saw the setupact.log file and note these messages (in bold & underlined characters):

  2016-05-30 10:58:13, info MIG transformation of security model for upgrade...
  2016-05-30 10:58:13, info MIG SceSetupSystemByInfName questioned with success the number of cycles (483)
  2016-05-30 10:58:14, AsyncCallback_SysprepStatus MIG of information: status: 0
  2016-05-30 10:58:23, Callback_NewSysCmiUpgradeSecurity MIG error [0 x 080815]: error in SceSetupSystemByInfName model treatment upgrade (1208) [gle = 0x000003e5]
  2016-05-30 10:58:23, PublishCriticalError MIG Info: Setup cannot continue. Your computer will now reboot and your previous version of Windows is restored.
  2016-05-30 10:58:23, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2016-05-30 10:58:23, current user interface pages and destination Info [0x0a013e] are the same. Judgment of navigation.
  2016-05-30 10:59:51, CallBack_DiagnosticDataSend DIAG Info [0 x 070042]: called with the notification of error published by ErrorHandler
  2016-05-30 10:59:51, info [0x0a0023] run UI ProgressInfo\SendDiagnostics task: StartProgress
  2016-05-30 10:59:51, DiagnosticDataSendWorker DIAG Info: Phase = 4 start time was 0X30D5CF248, end time was 0X30D5CF477, total was 0X22F
  2016-05-30 10:59:51, DiagnosticDataSendWorker DIAG Info [0 x 070044]: startSetupTimeInSecs = 0X30D5C9197
  2016-05-30 10:59:51, info [0 x 070045] DIAG diagnosis treatment given to the 2016-05-30 10:59:51
  2016-05-30 10:59:51, DiagnosticDataSendWorker DIAG Info [0 x 070046]: endSetupTimeInSecs = 0X30D5CAE27
  2016-05-30 10:59:51, DIAG DiagnosticDataSendWorker info: setupInstallTime = 0X1C90
  2016-05-30 10:59:51, DIAG DiagnosticDataSendWorker info: the user is NOT ACCREDITED-IN M² and Watson.
  2016-05-30 10:59:51, info [0x0a0024] run UI ProgressInfo\SendDiagnostics task: EndProgress
  2016-05-30 10:59:51, AsyncCallback_DiagnosticsSendStatus MIG of information: status: 0
  2016-05-30 10:59:51, MIG AsyncCallback_DiagnosticsSendStatus info: no information available courses
  2016-05-30 10:59:51, info [0 x 090095] PANTHR called WdsExitImmediate!  The execution stops and the queue will not be saved.
  2016-05-30 10:59:51, info [0x09008c] PANTHR SeqExecute - stop, since WdsExitImmediate() has been called
  2016-05-30 10:59:51, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-05-30 10:59:51, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-05-30 10:59:51, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-05-30 10:59:51, PANTHR DeleteCriticalSection info to pExecQueue-> csLock;
  2016-05-30 10:59:51, info [0x0500bd] of THE Module_Term_DU called
  2016-05-30 10:59:51, info [0 x 050081] of THE WaitAndCleanUp of THE...
  2016-05-30 10:59:51, info [0x0500a1] OF THE fact with THE... DUMgr cleaning
  2016-05-30 10:59:51, info [0 x 050082] with WaitAndCleanUp BECAUSE of THE...
  2016-05-30 10:59:51, info UI CallbackWin32UITerminate: removed WizardUI
  2016-05-30 10:59:51, info [0x0605a6] IBS requested UI to hide pages selection of language and regional settings.
  2016-05-30 10:59:51, Module_Term_Productkey IBS Info [0x06010d]: the valid product key in the table, see the property hide the value.
  2016-05-30 10:59:52, info [0 x 090081] PANTHR destroying any source not cited modules! (SEQ6)
  2016-05-30 10:59:52, info [0x0601d7] IBS InstallWindows:Error Type = 3211266
  2016-05-30 10:59:52, info [0 x 090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.

  I'm puzzled.  I looked in the forum for this error and did not find the same upgrade scenario that I am experiencing.  All advice is appreciated.  Thank you.

  Hi Tom,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not upgrade to Windows 7.

  I suggest you to refer to the suggestions by Andre Da Costa MVP responded on December 12, 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/upgrade-from-Vista-to-Win7-wont-complete/e2b6ecf6-C980-4006-81cb-ddd1b5ec108a

  Warning: Antivirus software helps protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you have to temporarily disable it to install other software and/or any relevant issue, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks by malicious software.

  You can also check:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom#T1=tab01

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Error: Type was not found or was not a compilation constant: AlertDialog.

  I tried to compile one of my PlayBook AIR applications using the SDK of AIR BB10 tonight and got:

  Error: Type was not found or was not a compilation constant: AlertDialog.

  The command I used to compile was:

  Set JAVA_HOME = e: files (x 86) \Java\jre7
  set PATH = % PATH %; E:\Program Research In Motion\blackberry-tablet-sdk-3.0.0\bin

  CD E:\Users\Daniel\Dropbox\Apps\iTunesSync\Version0.3
  mxmlc + configname = air - library-path +=. iTunesSync.as o iTunesSync.swf - swf-version = 10

  This works if I use the SDK 2.0.0, but doesn't if I'm using 3.0.0.

  Strange.

  I confirmed that AlertDialog is always present:

  https://developer.BlackBerry.com/Air/beta/APIs/QNX/dialog/AlertDialog.html#includeExamplesSummary

  In BB10, device skins (and others) require the ANE must be loaded with the installation.

• (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen

  Original title: Blue error screen

  I bought a laptop Toshiba Satellite M840. When I took my laptop to work, when all of a sudden my laptop crashed? It came with (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen. The problem is still ongoing and happens at least once a day, and it seems to be crashing more often?

  I created minidumps.

  https://onedrive.live.com/redir?RESID=B4BF3E5538F50D20! 119 & authkey =! AOTgLWC39ykXKi4 & ithint = % 2cdmp

  Can someone help me solve this problem? Thanks in advance.

  There are two questions.

  1 - athw8x.sys (your wifi atheros driver)

  2 - Symantec.

  I would completely remove the atheros driver and remove Symantec and use the built in Defender

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Does anyone know if reinstalling Windows 8 will correct the unhandled exception (eanomn.sys) kmode error

  Original title: KMODE

  Does anyone know if reinstalling Windows 8 will correct the unhandled exception (eanomn.sys) kmode error?

  This accident was connected to your ESET.  I delete the version current (2013) and install the latest available version.

• Error Type 2 SCD: ODI - 1228:ORA - 01747: invalid column, table.column, or user.table.column specification

  ODI error. When you try to import.

  Error Type 2 SCD: ODI - 1228:ORA - 01747: invalid column, table.column, or user.table.column specification

  It is a common question.

  Allow your SCD SCD table column properties if you do not select "crush on change."
  This property simply

  -Online CPC IKM goto => select ignore option error on update of existing lines.

• Error (type 3) CS5.5 android sdk emulator

  Hi all.  Did my best to try to find the answer to this one, but just can't make it work.  The system is Windows 7 Home premium SP1 64-bit.  I have the latest updates of DW installed.

  Using DW CS5.5, installed the Android SDK and can launch emulator very well, but when you use the Build function & emulate, the .apk file does not load in the browser.  Dreamweaver prompts whether the build was successful, but after reviewing the "buildlog.log" file, I noticed at the bottom:

  Application running in the emulator Android

  < DW >

  ____________________

  Set ANT_HOME=C:\PROGRA~2\Adobe\ADOBED~2.5\CONFIG~1\NATIVE~1\APACHE~1

  Set ANDROID_HOME = C:\PROGRA~2\Android\ANDROI~1

  Set JAVA_HOME=C:\PROGRA~2\Adobe\ADOBED~2.5\JDK

  set PATH=%JAVA_HOME%\bin;%PATH%

  CD C:\PROGRA~2\Android\ANDROI~1\PLATFO~2

  C:\Windows\SysWOW64\cmd.exe/u/c C:\PROGRA~2\Adobe\ADOBED~2.5\CONFIG~1\NATIVE~1\DWPHON~1\android\scripts\ANDROI~2.BAT com.vemergency.meriden_test C:\PROGRA~2\Android\ANDROI~1

  ____________________

  < EU >

  Departure: intent {act = android.intent.action.MAIN cmp=com.testcompany.meriden_test/. DefaultActivity}

  Error type 3

  Error: Class of activity {com.testcompany.meriden_test/com.testcompany.meriden_test. There is no such thing as DefaultActivity}.

  < DW >

  ____________________

  Set ANT_HOME=C:\PROGRA~2\Adobe\ADOBED~2.5\CONFIG~1\NATIVE~1\APACHE~1

  Set ANDROID_HOME = C:\PROGRA~2\Android\ANDROI~1

  Set JAVA_HOME=C:\PROGRA~2\Adobe\ADOBED~2.5\JDK

  set PATH=%JAVA_HOME%\bin;%PATH%

  CD C:\PROGRA~2\Android\ANDROI~1\PLATFO~2

  C:\PROGRA~2\Android\ANDROI~1\PLATFO~2\adb.exe kill-server

  ____________________

  < EU >

  Any help would be most appreciated!

  Thank you

  Keith

  OK; success!  Tracking information here and it worked.  http://www.mobisoftinfotech.com/blog/android/installing-apk-files-on-android-device-emulat or /

• Error: Type was not found or was not a compilation constant: PieChart.

  Hi all
  
  I get an obtuse error message from the compiler again. I get
  
  Error: Type was not found or was not a compilation constant: PieChart.
  
  For the following code
  
  < mx:VBox >
  < mx:PieChart id = dataProvider = "{parentApplication.services.webservice.getDealData.lastResult.SeriesVO"dealsPieChart"}" showDataTips = "true" > "
  < mx:series >
  < mx:PieSeries labelPosition = "legend" field = "count" field name = "name" / >
  < / mx:series >
  < / mx:PieChart >
  < mx:Legend dataProvider = "{dealsPieChart}" / >
  < / mx:VBox >
  
  I don't know what I am getting this error. According to the examples that I read on the site of flex on the charts all seem fine. Any pointers welcom.
  

  OK - I think that I n "t have the component graph charting. It looks like a separate download. The is not going to be open comes? If this isn't the case - first bad sign for me of the authenticity of the open source moves.

• Activation error: Type = 1, Message = 303

  I have the following problem...
  
  My version of dreamweaver MX2004 7.0.1 on windows xp pro
  start only if I am logged on as administrator
  
  When I am logged as a normal user, it starts.
  
  If I use the license transfer option, it starts the firsttime, but not yet thereafter.
  The patch won't install, because it says the dreamweaver mx is not in the directory, and it is. (this with the patch for version 7 & 6)
  
  in the activation log I get the following error
  
  Fri Aug 08 16:42:34 2006
  (Win) - Activation error: Type = 1, Message = 303
  Fri Aug 08 16:42:34 2006
  (Win) - SC error: Type = 303
  
  and I can't find any help about it.
  
  Can someone help me, please
  
  [email protected]
  [email protected]

  Hello
  I solved the problem as follows:

  Connect as long as administrator and give you administrator rights at a local level from the PC.
  When you reboot, you should be able to use dreamweaver without problem.

  Good luck