(athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL Error on a blue screen

Similar Questions

• Need to solve an Error Message 7B - blue screen of death/boot loop

  Hey community,.

  I need help. I'll try to find a way to resolve the error message on blue screen 7 b on a laptop HP Compaq 6710 b using XP, but he took trapped in a loop of boot BSOD and I can't access the command prompt to try to fix it. The situation is further complicated by the fact that the laptop has never been saved, and there is no XP discs for me to reinstall from.

  Wipe the drive and starting over is not a huge loss, but I need instructions on how to do that, without being able to use the last good config or the factory restore to XP disks.

  I'm sure that this information is on the internet somewhere, but the search engines sent me on a wild goose chase and I really hope I can solve this problem myself. I've only worked with Vista and need guidance on this.

  If anyone knows what to do, Please HELP! Good karma coming your way!

  Thank you

  Sryan2930

  Usually, I get this error when you try to transfer a hard drive from one pc to another, or after replacing a motherboard. The problem is probably the chipset/mass storage drivers.
  I had limited success by starting in safe mode and (re) install the drivers downloaded from the manufacturer's website.
  Here is the link to help you: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3356622&taskId=135&prodTypeId=321957&prodSeriesId=3356620&lang=en&cc=us

  I hope I helped!
  Brian

• Windows error 8 - (athw8x.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL.

  Windows 8 crashes intermittently with error DRIVER_IRQL_NOT_LESS_OR_EQUAL (athw8x.sys).

  I've seen other similar messages, but need advice on what I should specifically uninstall or change to stop what is happening?

  Hi rich,

  I understand that your plant and you get the error: DRIVER_IRQL_NOT_LESS_OR_EQUAL (athw8x.sys).
  This athw8x.sys file is associated with the driver for the Atheros Wireless card.

  To help you with the problem, we need additional information. Please answer the following questions:
  (1) what is the brand and model of the computer?
  (2) you receive the blue screen error when you use a particular application?
  (3) don't you make changes to the computer before this problem?
  (4) what antivirus application do you use?

  I suggest to visit the website of your computer manufacturer and install the updated for your Atheros wireless card drivers.

  If the problem persists, you can uninstall the same driver and restart the computer.
  To uninstall, refer to this step:

  a. press the Windows key + R, type devmgmt.msc in the run prompt.

  b. expand the network adapters section, right-click on Atheros adapter and then uninstall it

  c. reboot, let Windows 8 detects the driver and install it by itself.

  If the problem persists, you may need to check with your computer for all drivers to Atheros manufacturer.

• Get netr28ux.sys "error on a blue screen.

  Dell computer brand new running on the pre installed Windows7 Pro bought four weeks ago

  and

  & nine TL-WN321G adapter purchased separately specifically because it is compatible with Windows7 Pro 64 bit pre-installed

  netr28ux.sys "blue screen error" has been crashing the OS of the computer of my home at startup - can someone help me to cure this?

  I read online that this file system is something to do with the wireless network card driver... not sure if it is the OS or driver... However, the pilot works fine, and I connect to the internet OK with it.

  I took a minidump files and the error is an error PAGE_FAULT_IN_NONPAGED_AREA (50) compatible caused by the netr28ux.sys, who is a driver for the wireless.

  No other third-party driver is involved in the accident.

  The problem may be only with the netr28ux.sys that could be damaged or updated to a problematic version.

  I would say to uninstall the wireless drivers are now installed and install the next version of Dell:

  http://support.dell.com/support/downloads/download.aspx?c=us&cs=22&l=en&s=dfh&releaseid=R290807&SystemID=INSP_DSKTP_560MT&servicetag=&os=W764&osl=en&deviceid=21861&devlib=0&typecnt=0&vercnt=2&catid=-1&impid=-1&formatcnt=0&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=433070

  If the problem persists, please provide the files minidump resulting.

• Error with a blue screen in windows 8 64-bit because of the file "cnnctfy3.sys".

  I m sending u link of this error minidump files since there were 5 error files I downloaded on OneDrive

  Link: https://onedrive.live.com/redir?resid=620CE0EA1DD716E9%21356

  CrashFileUpdate folder_name

  Please help me... my laptop running very low, because of this. and the start-up stop n is tedious because of this...

  Thanks and greetings

  Ravi Mehta

  HI Ravi,

  This problem can occur because the cnnctfy3.sys file on the computer.

  All files dump reports show:

  9F error checking, {4, 12 c, fffffa8004a5ab00, fffff880009c2810}

  WARNING: Unable to verify timestamp for cnnctfy3.sys

  ERROR: Module load completed but symbols can be loaded for cnnctfy3.sys

  Failed to retrieve the thread context, Win32 error 0n30

  WARNING: Unable to verify timestamp for win32k.sys

  ERROR: Module load completed but symbols can be loaded for win32k.sys

  Probably caused by: usbccgp.sys

  cnnctfy3.sys is the driver of Connectify light package Filter Kit. If you have installed the package, I suggest to uninstall and check if this solves the problem.

  Please keep us informed.

• Driver atapi.sys - address f76fd5f9 of the blue screen IRQL not less or equal "stop 0x000000D1"

  I have a computer shape I work which is formatted, but windows recovery is here.  I get a blue screen when you try to retrieve that computer indicating"Atapi.sys address F76FD5F9 Driver IRQL not less or equivalent.  The stop codes are 0x000000D1 (0x005300cc, 0 x 00000007, 0 x 00000000, 0xF76FD5F9, I tried everything reformat this computer but nothing works.)  I get just the blue screen.  Can anyone help?

  ginger957

  Hello ginger957,

  ATAPI.sys is the driver file for the drivers of storage system. It may be the hard disk that fails to give the stop errors. If you try another hard drive or upgrade the hard drive on another computer which results do you see?

• Pavilion p 202nt: (rtwlane.sys) DRIVER_IRQL_NOT_LESS_OR_EQUAL ERROR HP PAVILION P202NT WİNDOWS 10 64-BIT

  Spoiler (Highlight to read)

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (rtwlane.sys)

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (rtwlane.sys)

  I have a problem with my pc when I use a blue screen happens and DRIVER_IRQL_NOT_LESS_OR_EQUAL (rtwlane.sys) occurs, what can I do I don't know sorry for English I Turkish

  Please click the link below to download and install the required driver to solve the problem

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943795&swItemId=ob_147638_1&swEnvOid=4158

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• ERROR ON STARTUP BLUE SCREEN

  Hello

  I have a computer laptop dv6-7010tx, and very often I get a blue screen on startup. I installed a windows 7 ultimate 64 bit and I tried to recover as well. But the issue refuses to go. I have two pictures here that will give an idea of the problem. Please help as soon as possible.

  Hello beginner1993,

  You get a blue screen from time to time when you turn on the computer.

  Run the diagnostics in tapping F2 at first upward and run the test to start. Make sure that you do not encounter any problems with the equipment.

  After the test to load the command prompt and run the following command SFC /scannnow. This should scan the computer for any errors of software and fix them if possible.

  Here is a linkto the command prompt.

  I would like to know how everything goes.

• Satellite A60: error messages on blue screen appears all the time

  Hello

  I had a Toshiba A60 satellite for awhile. It has been great so far, but I'm constantly getting blue screens of death, with millions of stop error different etc, I have read everywhere and updated to the latest BIOS, but still no luck.

  I don't know what to do, he gets the errors blue screen randomly, sometimes, the laptop can last an hour or two, then sometimes it shuts down quickly, please help me as soon as POSSIBLE.

  Thanks in advance.

  ~ Icesolar

  Hi Icesolar

  According to me, you know that there is no magic solution for BSOD problems. As far as I know, it happens more often because of pre-installed software. On my camera, I got only 3 times and always after installation of some third-party applications.

  Have you noticed something similar? BSOD is started after you install an application? Try to delete the most recent pre-installed software, or restore the system to an earlier time before BSOD begins to appear.

• Error Code 0x0000006B blue screen

  The system does not start after Windows 7 loads the following updates. It goes straight to the blue screen of unknown error Code 0x000000000000006B...

  Update security for Windows 7 for x 64-based systems (KB978601)

  Update security for Windows 7 for x 64-based systems (KB979309)

  Update security for Windows 7 for x 64-based systems (KB979683)

  Update security for Windows 7 for x 64-based systems (KB970232)

  Update security for Windows 7 for x 64-based systems (KB971332)

  Windows x 64-April malware removal tool 2010 (KB890830)

  I have not been able to isolate the one that is causing the problem, but due to a restore takes a while...

  Out of curiosity, what makes you think it's a diversion?

  My reasoning is as follows:

  1. http://msdn.microsoft.com/en-us/library/ff559142 (VS.85) .aspx mentions "Scan your computer for computer viruses;"

  2. McAfee applications have a reputation of ugly in my humble OPINION when it comes to protect users of such things (and even less able to detect & remove them); and

  3 McAfee applications are notorious for not upgrading properly. (Assuming that your version of the McAfee application has been automatically updated you bought the computer 4 months ago).

  The foregoing, I highly recommend you open an incident of free support on your problem before you continue.

• am getting error on a blue screen when I open the website of the Bank.

  Hello

  Works for a few hours on my windows xp lenovo t410.

  And when I opened icicibank.com and go to personal banking. A blue screen error appears.

  Not afraid to open the site of icicibank.

  Help, please...

  Hi anilraavi,

  ·         What web browser do you use?

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: If you are using Internet Explorer, perform an optimization of Internet Explorer on the computer of the article.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• error on a blue screen after you set new Athlon Proc and motherboard - Strop 0x0000007e (0xc0000005, 0xba2cb756, 0xba4c742c, 0xba4c7128)

  Original title: I need emergency with a blue screen error after new Athlon Proc and motherboard.!

  I had to fix my computer professional brothers due to its motherboard out. So, I advanced and ordered a motherboard latest and processor and also much more memory because the PC was about 6 years old. After installing, I he started and configured the BIOS and thought that it should start right up because it was working fine until the motherboard is out and also I left to himself, the hard drive that has XP installed, because he was also big enough for what he needs. But instead of cranking up XP, I get this error every time even when I try and boot in safe mode.

  I have also ordered him a new copy of Windows 7 to update his OS, but until I can get into XP and do an upgrade, I'm stuck. (I have to do an upgrade because of her inability to save his business files before exiting the motherboard.)

  * Without the [] error code: [stop: 0x0000007e (0xc0000005, 0xba2cb756, 0xba4c742c, 0xba4c7128)]

  Any help will be greatly appreciated, thank you.

  There is the old motherboard-specific drivers (for example, video, network, bridge, BIOS, etc.) in XP loads that are not compatible with the new motherboard. Conversely, you may need drivers specific to the new motherboard (see the disc that came with the motherboard for details). You might have to perform a repair installation on the existing XP. When you started on the XP installation disc, do not take into account the first mention of repair and then accept the option the second time, you are prompted to repair the existing installation.

  To be honest, you also get a new drive of 500 GB for Windows 7. A hard drive of six year, or approximately 80Gb (...?) and who will get eaten up real quickly by installation of Windows 7. In addition, I don't think you can update directly from XP to Windows 7. I'm sure that there must be a Vista installation in the meantime, but I was called incorrectly.

• Error on a blue screen at startup

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!  I am running Windows XP Media Edition

  Is the hard drive in this SATA? And if the SATA drivers are installed. When you installed XP?

  This stop error message may mean, if the SATA drivers have not been installed during installation (and AHCI has been disabled in the BIOS). And someone changed it AHCI after. And it can not find the hard drive now

• Windows XP "error on a blue screen.

  I got the "blue screen error" after receiving an alert of possible virus.  Now I can not even past the 'blue screen' and have tried the various functions of "F key" in all 'modes '.  Always on the blue screen.

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer.

  Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  All safe mode does not work, please help me. Any idea would be great at this point, I'm a little desperate...

  Thank you

  It could be a virus go dl on a thumb drive combofix his bleepingcomputer and then restart pc continuously press f8 again and again and again until it appears safe mode then go into safe mode with network once started in SafeMode plug dirve thumb and run combo fix, it might take some time

• first error: load key not found ERROR 999 (on blue screen...)

  I don't know what I was doing before the crash. But I know that after a reboot, I walked back and saw the following on a BLACK screen:

  No operating system found

  After panic completely, I rebooted and got this:

  On the blue screen: "key of loading not found error 999 (STHIVE =).

  Everything I tried to do since that time is up to us as 1. Memory is intact, 2. Hard drive needs to be replaced.

  I've been it for 15 years, reformatted computers, can hardly pull most problems, if it does not know where to look for answers.  But I've never had a total system crash.  I would like to have more information.

  WHAT I TRIED: recovery of Microsoft: failure |  HP recovery: failed

  I tried both several times.  I went into the bios diagnostics for, and that's when I got the 10008 = hard code it had to be replaced and code 10000 = memory? intact or something like that.

  Please someone... I need at least, recover the files if possible and learn how to replace a hard drive and get one at a great price.  I'm barely making it on the invalidity of the social security (because of Lupus, fibromyalgia, Chronic Fatigue, Addisons, several chronic autoimmune problems).  Some days my only contact with people using a laptop in bed is human.  That's why my sister bought and I would pay for 2 years.  2 years increased in March.  Now his seven and he broke down. Photos, MP3 files, etc., some are saved on flash drives.  Recording to an external hard drive... but alas, never did.

  FYI - I don't have a recovery disc - that I can find.  I ordered a drive recovery Windows Vista from MS yesterday, but if the hard drive is shot, it does not, right?  I also have HP files, for my HP Pavilion Entertainment PC, laptop, dv6736nr model.  Number of files available for download, boot order changed to ensure he'd be first boot CD, but he always comes back "no windows operating system" instead of launching the cd.

  Also - I don't know how to get into the back.  I bought my first computer in 94, post back and therefore never really learned much about it.  I can't do certain things in the BACK?

  Thanking in advance anyone who might help!

  Kathie aka Tobebo

  (Tobe and Bo are my two service companion Lhassa Apso dogs)

  Hello

  First thing to do is to replace the hard drive because apparently there is no. Data currently on the disk can sometimes be recovered by a person with technical knowledge, but you must be willing to pay for the service. It can be quite expensive.

  Running recovery disks will be futile until the above is accomplished. You will find that you will need to replace the memory as well. Maybe your system experienced a power surge?

  There is nothing to do in the BACK like that no longer exists as an underlying layer for the Windows operating system, it expired with WinME 10 years. Vista, XP, Win2K and NT line that they stem, using a command-line environment, but is not BACK and you can load it on a damaged disc. For what it's worth, you wouldn't be able to run the BACK of a hard drive from damage in any case, you'd have to load it from a floppy disk or a disk, and it is inefficient for an OS NT-based modern Windows.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org