Bug 3.2.09: Opens a connection via the icon sheet Alt - F10 forget selcted

Similar Questions

• Connection via the press Ctrl-Alt-Delete to start

  Hello
  Seems locked myself. Display shows, press Ctrl-Alt-Delete to begin, on Windows 2000 Prof, but nothing happens when you press these keys.
  Help!!
  Yusuf

  Hello

  Usually after using this key combination it appears the login window and you can enter your username and password.
  I don't know why it is not possible, but maybe you should use the wrong keys.
  Don't invert the DEL and AltGr keys.

• Is there a way to see the ip address of the devices connected via the airport?

  Hello world

  Is there a way to see the ip addresses of the devices connected via the airport? I can see the name of the devices but not what ip are they?

  Thanks in advance.

  Open AirPort Utility

  Hold down the option on your Mac so you double-click on the image of the AirPort router

  Wireless clients are displayed

  Click on the small arrow next to each wireless client to see details about the device and the connection

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• Internet Explorer message: "unable to connect via the parameter to wide band".

  When I try to connect to Internet Explorer, I get a message saying unable to connect via the parameter to broadband. We have AT & T Wi - Fi that I seem to be the only one of 4 people in our House, that has a connection problem. We all have different types of computers, some run Windows 7 and others are Vista. Don't no if this material. I preformed a few tests without results of troubleshooting. Help, please

  [Original title: programs network networking Internet site Internet website URL website network]

  Hello

  ·         What is the exact error message you get when connecting to internet?

  ·         Which is the browser you use to access the internet?

  ·         You are able to use other internet applications such as messenger etc?

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link below to connect to the internet in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 2:

  Follow the steps outlined in the article below if you can not connect to internet:

  http://support.Microsoft.com/kb/956196

  Method 3:

  If the steps above do not follow the steps in the link below for network connection problems in windows:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  I hope this helps.

• Unable to connect via the Cisco VPN Client

  Hello

  I have configured remote access VPN to ASA and tries to connect via the Cisco VPN Client 5.0

  I am not able to connect and watch the journal on the SAA

  ASA-3-713902: Group = xxxxx, IP = x.x.x.x, withdrawal homologous peer table is placed, no match!

  ASA-4-713903: Group = xxxxx, IP x.x.x.x, error: impossible to rmeove PeerTblEntry

  ASA does not support the K9 i.e. VPN - DES is enabled and VPN-3DES-AES is disabled.

  What could be the reason.

  Concerning

  Hi, I had this same problem, here is the solution:

  When you perform a debug crypto isakmp 255, so you see that the cisco vpn client does not support SHA +, you must use MD5 + AN or sha with 3DES/AES.

  Be careful, this debugging is very talkative, but that's the only way I found to get ITS proposal on debugging.

  Well, change your strategy using MD5 isakmp / OF would do the trick.

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• Unable to connect via the Internet to my ESXi server. Help, please

  Hi, I had a server ESXi 4.1 at home. When I try to connect via the Internet, it is not working.

  I put ESXi server to firewall and still, I can't ping my server even.

  No idea why?

  Kind regards

  Pawel Lenart

  Sit behind your firewall router esxi, transfer 443 to esxi management IP and ensure that management network vmkernel has the internal IP address of router as its default gateway.

  http://blog.peacon.co.UK

  Please give points for any helpful answer.

  Unofficial list of transfer USB devices work

• I disabled Creative Cloud via the icon in the top bar (Mac) and it cannot deliver on.

  I disabled Creative Cloud via the icon in the top bar (Mac). Unfortunately, this icon disappears just grizzled instead. So, how I turn on CC? Thank you.

  Restart your computer or check than applications > adobe > cloud file creative adobe for your executable.

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• HFG30 unable to connect via the Android app

  Nexus 7, HFG30 - all online and printed documentation confusing. Is not clearly the distinction between applications and the use of the web browser. Nowhere is the name of this app is mentioned. Had to go back with support to find the name.

  The name of the application's access to the camera more than, unfortunately, the Pixels.

  HFG30 not in the taken list supported here. Support says that it is supported. After all, no connection. Can connect via a browser however. Anyone else?

  Hi robbif!

  Thanks for posting.

  The application CameraAccess and CameraAccess Plus is not for all our camcorders.  Some newer models, like the G30 HF, are controlled using a web browser based remote connection, instead of using the application.  For more information about this, visit our help wireless page or view the distance travel brochure HERE.

  If it is a time sensitive matter, additional support options are available to contact us.

• OfficeJet 4500 said connected via the wireless, but is not

  Printer worked fine for 10 months and all of a sudden, was not connected to the HP Touchsmart 610.  No changes. When I run the setup of the network of the façade, he says success but when I press OK the date and time displayed are default (Jan 00...). It seems it is not connected and it does not appear on the network.  I restarted holding # and 6 to reset the printer and no luck.

  When I connect via a USB cable and run the installation CD, I get the error of the 427 firewall port.

  This article should help to maintain the wireless connection:
  http://support.HP.com/us-en/document/c02817031

  Give the steps described a try and tell us if it helps.

  Good luck!

• Can connect via the VPN, but cannot see the files

  I can connect via VPN to my company network, but the files do not arise under Vista. I have no problem to see them on my old Windows PC, so this is a specific problem of Vista. On my old system, just click on computer and it shows me my company on the network's records. No Vista - cannot find anywhere, even if I am connected via VPN. Where are they?

  Hello

  Since it is the network of the company, there is no way to know hwo security is configured, unless you are a computer scientist in society.

  Not "mess up" your computer, first talking to the person in charge of VPN connections.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• BlackBerry cannot accept the connection via the Mobile network?

  Hi all, on Blackberry, I want to open a server socket to listen to a connection come from other devices.

  Here is my code:

  String url = "socket://:12345;deviceside=true";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  Mobile network on that BB is ok, but it cannot accept any connection.

  I also use its mobile phone network to connect to other servers, it works fine when it's the client socket.

  I tried with the Wifi network, and it works very well.

  String url = "socket://:12345;interface=wifi";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  In my view, Network Service Mobile prevented so that other devices connect to it, is it true?

  Please explain it to me, thank you very much!

  This approach only works for mobile connections, when the data are pushed to the device.  You cannot use it to connect to other phones directly.  Sorry

• HP CP1525nw - connect via the wired network and Wi - Fi ad-hoc?

  At my work, we have our range of HP printers 1525nw connected in the printserver network via an ethernet cable.  The printer has its own IP address on the network configuration.

  That support computers XP stops, a copula of computers is cut out / blocked from the network of employment.  A computer is enough where we can make a USB connection to print.  Another lies on another bench.  In addition, who is away from the printer also may not be perfected for a compatible Windows operating system because of the incompatibility with specialized software used to operate the hardware connected to this computer.

  Is it possible for this network printer wired to be also configured to print wireless via an ad-hoc connection?  Maybe the idea was that we could install a wireless card on XP teachix computer and print wirelessly via a direct connection to the printer, by not having to connect via cable at all.  But it sounds like it would be not possible.  Looking for a straight answer before you start shopping for a wireless PCI card.

  Other messages, I read, I think that the CP1525 can be ethernet or wireless not both at the same time.  Prevent you from establishing an ad hoc network the way you described.

  You could try a cheap router with a built in print server connected to the usb port.  then add wireless dongles Wireless USB for XP computers.  Don't forget to make sure that the wireless dongles supports XP. Also for security reasons, you want to let the router disconnected from your network wireless.

  If your tecky enough and you don't mind playing a little, you can consult your thrift store local to a router used with a print server.  You don't need to print the fastest available wireless.  Just make sure it's a router b/g (not a single B).

  Treefrog