OfficeJet 4500 said connected via the wireless, but is not

Similar Questions

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• I'm trying to get an 8500 a connected via the wireless, but it does not link to d-link dir-615 router.

  The printer connects to the same router through the wired port but will not get a valid address using the wireless.  The IP is 169.254.140.246 in the wireless network test report, although everything is named PASS

  I changed from WEP to WPA and now everything works.  Now, to spend a few hours by changing everything in the House.

• HP 20 Pavilion all-in-one: 4500 DESIRE CONNECTS to THE WIFI, BUT will not be PRINTED

  Hello

  I have problems printing from my PC.

  I'm connected wireless and the PC can see the printer and recognizes that it is ready.

  I'll then to print the document, including the States of PC is printing and printed, but nothing happens, no document is printed.

  I have two portable mac I can print from without any problem at all, but not my HP PC family.

  Help, please

  Thank you

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• My lg800g phone shows connected to the computer but is not assigned a drive letter

  My lg800g phone shows connected to the computer but is not assigned a drive letter

  Hello

  You can manually assign the letter.

  Check out the link and check if that helps.

  Change, add, or remove a drive letter

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• WRT120N Wireless laptop connected to the router, but does not connect to internet

  I have a HughesNet HN9000 modem connected to a Linksys WRT120N router. I have two desktop computers, both running XP Home, connected to the router via ethernet .5e cables and work perfectly. I have a laptop running Vista Home Premium, I am trying to connect to the internet via the internal wireless card. According to me, the laptop connects with the wireless router, as it connects but says 'Local only' - it won't let me access the router IP/control panel. I tried to reset the router / modem as well as the parameters of the laptop, but I keep getting the same question.

  If I connect the laptop and the port #3 on the router via a cable .5e I can browse the Internet. But I need to be able to use the laptop throughout the House so electrician is not an option.

  I found this article which directed me to this download , which worked. If your help is most needed. Thanks anyway.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• When reading emails, said TB connected to the server, but is not download emails

  The following suddenly started happening. (Things are working very well for several months on the same account settings).

  When I try to retrieve the email from my IMAP e-mail server, there is a message at the bottom that says that Thunderbird is connected to the server, but nothing happens thereafter - no emails are downloaded.
  Thunderbird invites me even a password to connect to the IMAP server as it usually does.

  However, note that I * can * send emails without problem (via the configured SMTP server).
  As well, I have no problem reading the emails on the server even on other customers of emails with same account settings.

  The problem started after I upgraded to Thunderbird 38.2.0, an earlier version of a few months back).
  Thunderbird prompted me to do the upgrade, and it can have kicked so he was still connecting and authenticating to the IMAP server - which is just speculate offshore.

  Any ideas what I can do?

  Details of the platform: Thunderbird 38.2.0, Windows 7 x 64, entering via the SSL Protocol IMAP, SMTP outgoing via the SSL protocol

  Thanks in advance

  Glen

  Thunderbird 38 is indeed longer than previous versions... See my blog. There are a few things you can do. Ranging from Fix Security broken on the server to a temporary add-on which will establish market if the server hotfix is delayed.

  http://thunderbirdtweaks.blogspot.com.au/2015/07/logjam-and-Thunderbird.html

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• Wireless printing for laptop USB connected via the wireless office printer

  How to print from a laptop (Toshiba, Vista 32-bit) on a HPC6250 USB printer connected to a desktop computer wireless (Dell, Win 7 32/64 bit). My wireless modem is ATT U-Verse.  Printer has USB or ability of ethernet cable but not wireless. The modem is not printer ethernet connection is not viable.

  Thanks for any help.

  MRZ

  Hi BH.

  I activated the such LPD service indicated in your link, but it did not turn. When I sailed through the other answers the last one said to remove the spaces in the name of the shared printer. I did it and it seems to work.

  Thank you for helping me with this problem. It is unlikely that I would have found the link on my own.

  MRZ

• Can connect via the VPN, but cannot see the files

  I can connect via VPN to my company network, but the files do not arise under Vista. I have no problem to see them on my old Windows PC, so this is a specific problem of Vista. On my old system, just click on computer and it shows me my company on the network's records. No Vista - cannot find anywhere, even if I am connected via VPN. Where are they?

  Hello

  Since it is the network of the company, there is no way to know hwo security is configured, unless you are a computer scientist in society.

  Not "mess up" your computer, first talking to the person in charge of VPN connections.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I have uverse highspeed wireless modem. My office is connected to it and it works fine. My laptop connects to the modem, but does not connect to the internet.

  I tried to re-initializing modem and reload Explorer.  Any search engine will find internet.

  Hi Steveyy,

  1. you receive messages or error codes?

  2 have you tried to update the wireless card?

  You can read the following article and see if it helps:

  Setting up a wireless network

  Solve problems, find wireless networks

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• WRT54G will connect to the network but will not connect to internet

  Guys, I installed an older Linksys CM100 cable modem and when I did I lost the connection to the internet using the WRT54G Router. I can connect fine net when I go to right fromt the modem cable to the pc. I can use my home network very well. I did a firmware upgrade, does not. I'm losing my mind. It worked fine before the new cable modem. Does make sense to anyone? BTW, I can't connect to the internet via wired or wireless connections and ping www.google.com gives 100% packet loss. Ditto for a ping to 192.168.1.100 (cable modem) when the router is connected.

  Dear God please help me

  -Jacob

  Thus, because no one here was able to offer all the help, I called tech support and was very surprised. I was able to get a tech immediately and without going through the 1 million on the phone buttons. The service is in India, but I could communicate well enough with him, even though I usually have people of understanding of handful who speak English as a second language. The issue that I had was that the default IP of the modem cable (192.168.1.100) and ip address of the router (192.168.1.1) were too similar. Apparently, the fact that the 3rd number 1 for both series was the cause of the problem. We changed the IP address of the router to 192.168.5.1, power cycling it and unfortunately it worked.

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• OJ j6480 all in one. : printer connected to the network, but will not print.

  OfficeJet j6480 all-in-one Windows 8

  My printer configuration report show that the printer is connected to my home network. My Control Center shows that my HP printe (my only printer) is listed as the default printer. When I open it, it shows a document in the queue, and offline. When I click on 'offline' the document in queue is considered and when I click on "Printer" in this window, the drop-down list displays the default printer, but 'use printer offline' isn't not verified. Bottom line, it's that I can't print. Help much appreciated woutd.

  I found someone with a similar problem and a simple solution. I deleted my printer in the "devices" list and reinstalled

  It worked. I suspect that your suggestion about the IP was probably on the brand, it had not occurred to me.

  Thanks for the quick response.