Bug in Riched20.dll using EM_STREAMOUT XP

Similar Questions

• WINDOWS error 126 and RICHED20.dll is FOUND and ERROR NSIS

  I've recently been delete duplicate of my WINDOWS XP files
  Have also recently installed auto extra ram memory; now, with a total of 1 G
  Have defragmented registry and hard drive
  Used Norton eraser to ensure no viruses, etc...
  Thought everything was good now BUT tried to use iTunes that could not be accessed because of TWO error codes.
  It said 'cannot find RICHED20.dll.
  Looking for the computer, found that several listed in my system.
  Also have WINDOWS error 126.
  System restore points tried many times - no will.
  I tried sfc/scannow - no will
  Tried to remove all APPLE, HELLO, QUICKTIME, iTUNES and reinstalled - No. SOLVE
  Tried to download a free program called RECUVA by Piriform and COULD NOT LAUNCH because of the NSIS ERROR
  RECUVA recovers files...
  Do you have any suggestions for assistance?
  It of frustrating and prevents me from doing my work
  PLEASE ADVISE/HELP ME or tell me WHERE I CAN GET HELP!

  If you mean that you see a message like this trying to launch iTunes:

  iTunes.exe - Unable to locate component
  This application has failed to start because RICHED20.dll not found.  Reinstalling the application may fix this problem.

  Followed by:

  ITunes has not been installed correctly.  Please reinstall iTunes.
  Error 7 (Windows error 136)

  I can tell you that none of these ideas of Support Engineer will replace a missing riched32.dll file.  It's just another technical support engineer wild-goose chase.

  You need to replace the missing file.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called riched20 when the name of the file should really be called riched20.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• %1 is nt a demand valid (0x8007C1) and C:\windows\system32\riched20.dll

  Can someone tell me why I get these errors on my window vista 32 bit system?

  %1 is not a valid application (0x8007C1)

  C:\windows\system32\riched20.dll is not compatible with this version or is damaged

  Hello, AllenMuir,

  Please list brand and model of the computer, thank you.

  What are the steps you take when this error occurs?

  (1) install you?  Printing software?

  (2) using Windows Update?

  Here are the instructions of the software HP when meet %1 is not valid... error

  When you install the HP Windows product software, you'll see the error "%1 is not a valid Win32 application" message on the computer.
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&cc=us&DocName=c00318556&DLC=en#N472
   
   

• mozcrt19.dll uses random high CPU time, stop loading Web pages

  I installed a fresh copy of FF 8.0.1, when I start FF for the first time and after a few minutes, Web pages stop loading, then FF crashes, I check the process I saw firefox.exe uses almost all my CPU, with Process Explorer, the file MOZCRT19.dll uses all my CPU and Web pages don't load more, then after a few minutes FF became normal, after a few minutes, once again MOZCRT19.dll uses all my CPU and so on...
  I have tried disabling all my modules without any advantage,
  also, I have disabled all the plugins with no advantage,
  screenshot of MOZCRT19.dll http://img26.imageshack.us/img26/5888/ffhang1.jpg
  Please help me to solve this

  I have the problem, if you have of SPEEDbit Video Accelerator
  Uninstall immediately, not just out of the program, because it will leave some of the services that are running, and I recommend to use an uninstaller like
  Your Uninstaller! 7 , because it allows to uninstall everything related to the program.
  If this solves my problem.

• The DLL call fails when DLL uses a wide range

  I call a C++ dll in LabVIEW 32-bit on Windows 7. I kept getting error 1097 and finally understood it is because the dll uses two large paintings of 5 MB each. The tables are initialized in the constructor of an object, malloc is not used, or whatever it is. If I do the smaller berries, then everything works fine.

  The problem is not difficult to work around, now that I know what is the cause, but can someone tell me why a dll using a lot of memory would be a problem? I feel that 10 MB is really a lot of memory to use on modern computers.

  OK, you can test the appeal of the DLL in a Visual Studio test harness?

  In addition, in case you haven't seen another 'DLL error 1097' son type, here are a few. The cause of 1097 in your case can be illuminated by a multitude of courses of troubleshooting:

  Call dll error 1097

  Error code coming 1097 in DLL call

  error 1097 after the call dll function that allocates memory inside

  1097 error in the transition from table from C++ DLL for LabView (seems very relevant, although long)

  I know there are a lot of reading, but there is a good chance that the magic trick is in one of these threads already. We will ride on the shoulders of their work.

• CVI DLL using the reminders of Message Windows

  Background:

  I had a CVI wound around a third-party DLL executable application.  Recently, I've built a few LabView modules and wanted to use the features in the code of the CVI.  I deleted as much as I can from the code of the CVI and built a DLL out of it, so now that it's a call to a third party DLL DLL of CVI.  The third-party DLL uses windows messaging to communicate with the CVI DLL.  I wanted not to re - write the functions already developed in CVI in LabView (much too much effort).

  Problem:

  The problem is windows messaging in CVI uses the InstallWinMsgCallback and binds it to a group of experts.  The events are not processed until you call RunUserInterface(). RunUserInterface does not return. Therefore, any LabView module that loads this DLL crashes, waiting for the DLL back.

  Does anyone develop a CVI DLL, which uses internal reminders, which can be called from an external process?   Anyone have any ideas on how to get around?

  Daniel,

  In fact, I came across the solution even before that you posted.  One thing I noticed however was that it was a little unpredictable when the message would be received.  It turns out that defining the InstallWinMsgCallback to intercept that in_queue worked without needing a processsystem looping events.

  -Bryan

• VAIOCare Bug error 404 when using search

  Hello. There is a small bug with the VAIOCare software. If you type a search in the search "Help and Support" bar, the browser will always return a 404 on the Sony eSupport site.

  This affects everyone? It seems easy for developers of software Sony patch it's just direct me to a broken link.

  Thank you.

  Thank you for your post and welcome to the forums

  What is the model number of the Sony Vaio you use? What version of Vaio Care is on the Vaio? You can always go to http://www.esupport.sony.com and install the updates manually if the updates are critical and important to install. Please call Sony Support to address the Vaio Care update the issue and have a product specialists help you resolve this issue. Please click the following link to contact the Sony Support:

  http://eSupport.Sony.com/us/p/support-c... type_id = 24

• Bug found during the use of references to the control in subVis on Compact RIO?

  Hallo,

  I have a simple task. I want to read higher VI into a Subvi the real value of a control to a level. I want to solve this problem by using a reference to the control.

  I have attached a simplified program that shows this.

  But the problem is now. When I run the main VI on a cRIO-device, the indicator "DataByReference" is not updated with the actual value. Only when I opened during execution of the "RefMain.vi" too, then everything works fine.

  More strange thing is, when I run the VI of hand on the host PC, everything works well, also without having to open the "RefMain.vi" when executing.

  Someone at - it an explanation for this behavior?

  Thanks in advance!

  Bernd

  This isn't a bug.  See this explanation.

• Resizing a picture of structure within a DLL using the memory manager

  Hi all

  I dug deep inside the rooms, but has failed to find a solution to my problem.

  I am building a dll, which made a few imageprocessing and must return an array of structures to labview, with a struct for each element of the image.

  Because I do not know the number of items in advance and at the limit of the number is a number of magnitude higher than expected, I don't want to allocate such a huge part of memory before the dll call in labview.

  In an older version, I used a table 2d for the elements, where each line contains the values of each element. Here I used the function NumericArrayResize, which worked very well. But I have to add several subprocesses and using structs (or clusters in labview) seems to be more useful and more clean to me, I had also some items back and Foreword climb several times.

  For example, a struct element must take 2 single beds and 1 uint32. My question now is, how can I resize this table of struct with memory manager, functions as the NumericArrayResize functions is not suitable for this purpose?

  (Access to an array of structures inside the DLL and after reading the changed values in Labview is surprisingly easy )

  Thanks in advance

  Well, I was able to solve it myself. I found this thread, where the first rolfk post made me think. It seems to me that the numericarrayresize function behaves very similar to the function realloc of c. so I used the unsigned int type 8 (which is just a byte) and multiplied by the number of bytes used by a struct, in my case 12 bytes (4 + 4 + 4) and multiplied it by the number of structures (elements of the image) I. Fortunately, it worked and the block of memory has been resized, exactly as I wanted it to be. Important note: do not forget to adjust the size of the handle element, otherwise Labview does not know the size has changed.

• I got error 0x8002801c in Windows 7 registry regobj.dll using regsrv32 while using Microstratergy

  I got an error message 0x8002801c then that he was trying to use Microstratergy Desktop.First I got an error that the ActiveX component cannot create object... plz help me

  Hi Ankushkar,

  1 are you facing any problem with the windows operating system?

  2 is the only limited issue while access Microstrategy?

  The 0x8002801c error value means, access to the OLE (Object Linking and Embedding) registry error. You must copy the MSCOMCT2. OCX file in C:\windows\sysWOW64 not C: \windows\system32.

  
  Run the command with elevated privileges, to do this, follow the steps below:

  a. Click Start in the start search bar type CMD, right-click on the command prompt icon in the box programs and then click Run as administrator.
  b. at the command prompt, type regsvr32 wmnetmgr.dll and then press ENTER.

  Note: Make sure that you are logged as an administrator of the computer.

  See the following for more information Microsoft article.

  How to use the Regsvr32 tool and solve the Regsvr32 error messages

  Keep us updated on the status of the issue.

• Oracle.Dataaccess.dll using unmanaged for 32 and 64 bit Winform application.

  Hello

  I am new to oracle ODP.

  I have a few questions about her.

  1. If I give the reference only and do not include gac Oracle.Dataaccess.dll (suppose 2.11.3.XX) in my project and the client system has the access.dll of oracle version 2.11.2.XX(or autres) then what happens?

  Be it use the 2.11.2.xx DLL to GAC or error.

  2. I need to create some app for 32 and 64-bit client then should I develop a version for two separate, or are there other alternatives (I can't use the managed oracle DLLS due to .net 2.0).

  I've already lost two days on managing versions of oracle as oci.dll ddll, oraop11s.dll etc.

  Please suggest any other alternative if you have

  Thank you

  I think that if you run an application on machine Win x 64 with AnyCPU, 64-bit .NET will be always charged. I don't think you can change this even if you try to load a 32-bit DLL. There may be a way, but I do not know myself.

  If you ODP.NET 11.2.0.3 on your system, I don't see why you need to install an earlier version of ODP.NET, such as 11.2.x

• Simultaneous access to a DLL using the JNA

  Hello
  
  I'm working on a Java project where I use JNA to load a library (.dll) that implements several functions for a VME bus. The project works well, without any other application requiring access to the VMEbus (ie using the same dll). However, the project that I am is supposed to be launched with the other applications that use the same dll. In this case, it seems that the FMV locks the dll file, and then other applications no longer work because they cannot access the dll.
  The JVM wants exclusive access to the DLL, but of course that he will never go. How can I get my program to access the dll of simultaneously with other applications without locking?
  I already looked in the java security policy and the Security Manager, but no idea at all, so any help would be appreciated.
  
  Thank you very much
  
  Kind regards
  
  Alexander

  Lahdhal wrote:
  Assuming this is true, there is a point that I still don't understand: how the operating system can grant (read) access to the dll several programs in C++, but it cannot load the dll for java programs and c ++ both ? Is a conflict between java and c ++ at the same time trying to load the same library as possible?

  Because programming is difficult, computers are far from perfect and the operating system doing its best in this imperfect environment.

  Instead of trying to blame the technology (which will be don't get you anywhere), think about it for a minute. Which can be a difference between C++ and Java applications? I can cite one that is likely, but I can't know for sure that this is the case due to a lack of information from you:

  -your C++ applications bind to the DLL at the time of Assembly (IE. you include a lib in your project)
  -Java binds to the DLL at runtime using LoadLibrary

  I'm not saying that it is a possible cause, I just try to open your eyes a little. There are things to discover. To be read on the operating system with the dll works until you can actually find. But whatever you do, stop blaming technology.

• Bug 7007980: Points are used as the value separator... REST

  Hello
  This problem can be caused by an accident that I had on my computer which has led me to ask for help
  "Impossible to re - install 1.5.1 after crash".
  After replacing all 'C:\Documents and Settings\guan\Application Data\SQL Developer\system1.5.1.54.40' file SQL dev works normally again.
  
  First I thought that the problem has been resolved, but when I try to "export data / insert"it always returns"."-separated Insert statements instead of ',' separated from those
  Example:
  INSERTION of REM in DATA_TYPES
  Insert into DATA_TYPES (ID, NAME) values (1.') STRING ");"
  Insert into DATA_TYPES (ID, NAME) values (2. (' DATE');
  Insert into DATA_TYPES (ID, NAME) values (3. (' NUMBER ');
  
  Preferences / database / General Export settings is comma ', '.
  
  I m almost sure I didn t I have this problem on 1.5.1 before the crash
  Are there more preferences to replace?
  All ideas are welcome
  Gunnar
  
  Published by: GuAn Sep 26, 2008 17:48

  There is a currently open bug where export uses the decimal separator of the NLS parameter as values separator.

  Solution: Change your NLS settings (risky)

• Join external condition bug/feature when you use a RC?

  First I picked up on this bug/feature in an article in the blog of Armstrong ([http://learndiscoverer.blogspot.com/2008/05/using-case-to-solver-outer-join-issues.html])
  
  It seems that when you use an OR condition in Disco as well as 10 g, it ignores the join on the table conditions...
  
  I've included the two reports the SQL code to illustrate my point:
  
  Here is the SQL code generated when I agree with the point of view, you will notice the outer join (i.e. "(+)" ")
  SELECT O100288. UNIQUE_ID, O100291. UNIQUE_ID
  OF ODSTHING. TABLE1: O100288, ODSTHING. O100291 FROM TABLE2
  WHERE ((O100291. UNIQUE_ID = O100288. UNIQUE_ID (+)))
  ;
  
  Here's what happens if I simply add that a condition is not null. Notice the outer join on the 'IS NOT NULL' which allows to do nothing
  SELECT O100288. UNIQUE_ID, O100291. UNIQUE_ID
  OF ODSTHING. TABLE1: O100288, ODSTHING. O100291 FROM TABLE2
  WHERE ((O100291. UNIQUE_ID = O100288. UNIQUE_ID (+))) AND (O100288. UNIQUE_ID (+) IS NOT NULL)
  ;
  
  This is what happens when I have AND the same condition with himself, he remains outside joined
  SELECT O100288. UNIQUE_ID, O100291. UNIQUE_ID
  OF ODSTHING. TABLE1: O100288, ODSTHING. O100291 FROM TABLE2
  WHERE ((O100291. UNIQUE_ID = O100288. UNIQUE_ID (+))) AND (((O100288. UNIQUE_ID (+) IS NOT NULL AND O100288. UNIQUE_ID (+) IS NOT NULL)))
  ;+
  
  Here's what happens if I have the same CONDITION with himself. MAGIC! The outer join disappears!
  SELECT O100288. UNIQUE_ID, O100291. UNIQUE_ID
  OF ODSTHING. TABLE1: O100288, ODSTHING. O100291 FROM TABLE2
  WHERE ((O100291. UNIQUE_ID = O100288. UNIQUE_ID (+))) AND (((O100288. UNIQUE_ID IS NOT NULL OR O100288. UNIQUE_ID IS NOT NULL)))
  ;
  
  Is it the way it is supposed to work? If it is then I don't see any trace of it in the documentation ([http://download.oracle.com/docs/html/B13915_04/conditions.htm])
  
  Is it just a useful bug?
  
  What people think about its use?
  
  Published by: user4404031 on Sep 12, 2008 08:23

  Hello

  It is documented (http://download.oracle.com/docs/html/B13916_04/conditions.htm#sthref854) that the discoverer does not use outer joins with IN and OR conditions. But the implications of this are not stated. The documentation never tries to explain the underlying SQL.

  Rod West

• Crash when opening e-mail folder, but I can access send via unified view. bug 1175190 - msvcr120.dll

  Hello!

  I have several e-mail accounts configured in my thunderbird, which is set from the perspective of unified display. They work all if I click to see only the emails on behalf of individual, except one. As soon as I press a thunderbird crashed... I have already deleted the account and reconfigured again... and the same problem is happening... Does anyone know how to fix this?

  One of the errors IDS is this 726ca18a-986b-44ca-9b20-c1bc72150618 and the main reason for crash is EXCEPTION_ACCESS_VIOLATION_READ... but I have disabled all add-ons and the same error also occurs...

  Thank you very much!
  See you soon

  A fix has been developed, but it is not available for version 38 during about two weeks. Until then I suggest you download and install the version 31.7.0 of http://download.cdn.mozilla.net/pub/mozilla.org/thunderbird/releases/31.7.0/win32/en-US/Thunderbird%20Setup%2031.7.0.exe should not cause your messages to redownload. If you use the calendar module, you need to reinstall the version 3 of the calendar addon (which should not affect calendars you use).