%1 is nt a demand valid (0x8007C1) and C:\windows\system32\riched20.dll

Similar Questions

• just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

  original title: Please help

  just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

  Hello

  1A Windows XP installed properly on your computer?

  2. If it is installed, you face any problem with Windows XP?

  I suggest you try the methods mentioned below and check if it helps:

   

  Method 1:

  Try to do a Scan SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

  (a) click the Start button.
  (b) type: cmd.exe in the search results.
  (c) right click the cmd.exefile and select 'run as administrator '.
  (d) in the CMD window, type:sfc/scannowand press the Enter key.
  (e) restart and see if that solves the problem.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Hope this information is useful.

• Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

  All of a sudden I can't activate my zone alarm service, because I gives me a message that the Validation failed for c\windows\system32\zpeng25.dll.  After you receive this message, I ran software to fix registry errors, but that has not fixed the problem.  I am able to follow the explicit instructions so careful instructions are given.  Thank you for your help.

  Do Zone Alarm support say when contact you? What responses did you get when you posted in their forums?
  http://forums.ZoneAlarm.com/index.php

• FreeCell stopped loading: 'no graphics device adapted not found' and c:\windows\system32\aticfx64.dll is not designed to...

  I got my video card to RMA and then all of a sudden, after I installed the latest drivers (ASUS EAH5970) I ge the messages:

  1 c:\windows\system32\aticfx64.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider.

  2. no suitable graphics devices found

  3. "unable to detect a supported video card" ("Dragon Age: Origins" when starting)

  All these games have been working well in advance.

  Hello!

  You can uninstall then re - install video drivers, using Windows Control Panel and the option of 'Programs and features' to uninstall the ATI video drivers, reboot and then install the latest drivers from here: http://support.amd.com/us/gpudownload/Pages/index.aspx

  Best Katy

• Try to install 2013 professional and get "windows\system32\d2d1.dll error".

  I am trying to install Professional 2013 and make me "windows\system32\d2d1.dll error". I thought it was a mistake to download so bought the dvd but is not no longer works. Ive tried a few fixes suggested by community in regedit and disabling the start up, but nothing works.

  Explorer has stopped working when I tried to switch to Explorer 10 then this first.  Counsel for a non tech person is welcome

  Hello

  Thanks for the reply.

  For Microsoft office related issues, post your question in the following link.

  Office

  http://answers.Microsoft.com/en-us/Office

• Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

  windows\system32\vsinit.dll

  I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

  Then, I get a message:

  Validation failed for C:\WINDOWS\System32\VSINIT.dll

  Any ideas?

  Martin

  Hello

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

• How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

  I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

  Thank you!

  The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

  After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

  Restart your computer, it works now from.

• application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  Hi everyone, my fathers laptop crashed yesterday and since then he was able to start and the following message appears

  application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  something appears then it restarts. I did some occasional checking of this problem, as believe that he may be able to replace the file with its installation in recovery mode disc, although neither nor I did before can someone provide some support on what to do, ideally if we can get into windows and get the docs off the laptop computer he is happy the new facility because I think that it maybe Basic virus/malware issue.

  Thank you for your time and help in advance

  If the c:\windows\system32\odbcint.dll file is missing, you see a message like this:

  User Interface failure
  The logon User Interface DLL msgina.dll failed to load.
  Contact your system administrator to replace the DLL or restore the original DLL.

  There is a button to click to restart, which when clicked, takes a while to reboot the system.

  If the c:\windows\system32\odbcint.dll file is corrupted, you will see a message like this:

  Winlogon.exe - bad Image
  The application or DLL C:\WINDOWS\system32\odbcint.dll is not a valid Windows image.  Please check this against your installation diskette.

  By clicking OK twice, you will see the message above about the failure of User Interface.

  There will be events in the case where the viewing Application log that look like this:

  Event type: error
  Event source: ODBC
  Event category: no
  Event ID: 0
  Description:
  Cannot find the description for event ID (0) in Source (ODBC). The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to load the resource DLL odbcint.dll.

  You should figure out what happened to get into this situation and respond to the following questions, then decide which is the best plan:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _.

  Did the problem to the top after show installed new software and if so, what software?

  You have recently installed any type of remote control software?

  Now to fix it depends on how you are fixed to the boot media, since you'll have to start on something.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, start in Recovery Console XP using your genuine XP bootable installation CD or if you have a genuine XP bootable installation CD, you can make one (no XP media required).  If you don't know what type of bootable media, you, do a CD of bootable XP Recovery Console and do not forget.

  If Yes, you want and are not in possession of a genuine XP bootable installation CD or a CD from Recovery Console XP bootable, the instructions to create a bootable XP Recovery CD of Console can / will be provided before any questioning begins.

  You can replace the missing file or suspect the XP Recovery Console by entering the following command:

  Copy c:\windows\system32\dllcache\odbcint.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  If you get some type of a file not found message, the file is easily replaced using other methods.

  Remove the CD and type "exit" at the Recovery Console prompt to restart the system.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• "The Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image" Windows Live Mail - Error Message

  When you use Windows Live Mail, whenever I try to open an e-mail that I receive the following error message: the Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image.  What can I do about it?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Startup error: C:\Windows\system32\imagxra.dll is not valid

  Original title: C:\Windows\system32\imagxra.dll is not valid

  It appears when I click on anything and while the pc is CONSTANTLY boot on & it will be visible!
  WHAT CAN I DO?

  Hi LumierRodriguez,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Check if the problem persists in the safe mode and after return with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Error "the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. "Please check this against your installation diskette."

  Original title: lockout

  I get a black screen with the message from the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. Please check this against your installation diskette.

  Hey Todd-Cindy-MorganBurris,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. You are able to boot into Windows after the error message?

  Method 1

  If you are unable to boot into Windows then check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If you can boot into safe mode and clean boot procedure don't help then I would suggest that scan you SFC on the computer that will search the corrupted system files and check if that helps.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• error windows\system32\advpack.dll is not a valid image

  I try to install Life Cam VX-5000. I get an error image DXSETup.exe - bad... It is said THAT DLL C:\WINDOWS\system32\advpack.dll is not a valid windows image. Please check against your installation diskette. I'm not a programmer or anything, just an ordinary girl looking for help. Can someone walk me through what to do to solve this problem in simple terms? Thank you!

  System Machanic 6 has detected that a file Advpack.dll was spyware on his deep optimization of Start Up procedure. However, Windows replaced after its deletion and I ran SM6 Pro again. This time he ignored the file.

  CONCLUSION: There are maybe a program that replaces the Advpack.dll real with a fake spyware Trojan. Perhaps in one of the free SP2 packs on the internet or another program. Here again, it may be a fault with Spyware detectors.

  As long as the file is replaced by Windows automatically, so there is no real problem, and we can thank God for the major spyware removal programs.

• Performance issues in XP after removing the Trojan horse, now get "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You know not how the computer has been maintained, which has been incorrectly installed, what is missed, what virus and spyware, there may be, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you reinstall Windows properly.

• EXE Error "the application or DLL C:\WINDOWS\system32\WINHTTP.dll is not a valid Windows image

  When I try to download & install programs, the following error message "[program] .exe" is displayed: "the application or DLL C:\WINDOWS\system32\WINHTTP.dll is not a valid Windows image.  Please check this against your installation diskette. "All the solutions out there?

  Hi pixietra,

  1. did you of recent changes on the computer?

  2. what browser you use to download programs on the computer?

  3. it happens with any download and installation of the program?

  4. do you have security software installed on the computer?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747