"Bug" in the LCD of a Satellite A100-522

Similar Questions

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• How to get and replace a key on the Satellite A100-522?

  Hey, Toshiba.

  I have a Toshiba Satellite A100-522 model No. PSAA2E-01C01EED and one of my shift keys
  has broken below, so I can't use it (the small plastic bar to balance the key is broken
  If the key "blockages". Can I send it for repair to the warranty, and Ive talked to the
  seller, but I don't have the time to send it for repair (no laptop replacement in the meantime).

  Is it possible to get a new key and replace it myself? I know that some other laptop producers do the same thing,
  rather than use a lot of time on repairs, if they are too simple.

  Concerning

  John Reyes

  [email protected]

  Hello

  Well, it's very easy to replace the keys.
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20727&MessageID=76283

  But if the key is broken you will need to replace the entire keyboard.
  To remove the keyboard, you have to remove the cover plastic thinking above the F keys.
  Under this coverage, you will find 2 crews secure the keyboard
  Remove the two screws and remove the cable from the flat keyboard which is connected to the motherboard.

• Issue of the upgrade to Vista - Satellite A100 (PSAA9)

  Hello.
  Well, I think to upgrade to windows vista from my laptop (Toshiba Satellite A100 (PSAA9)). I was researching (little) on the drivers and hardware compatibility with vista, and it seems that if I update now, I can't find major problems. Is this true?
  I ask because when I was looking for drivers for vista, I found many (and some of those that exist, I can't download them!) But even without a driver, vista will recognize and install drivers 'default' for the material of my laptop? Can someone answer this with some?
  My major concern is connectivity: lan and wireless! I'll be able to install the hardware drivers to operate these two things?

  Thank you very much to all those who somehow tries to help with these issues!
  Good bye.

  Hello

  I upgraded my and installed all the drivers from the card reader SD me just used for XP drivers and they worked very well. There are a lot of vista drivers now available for this model, although I am having trouble with the value added package to allow me to use the function keys and access keys.

  Apart from that, I had no other problems!

  Good luck... Let me know if value-added package that works for you, seems to be working for some but not for others.

  See you soon

  Gareth

• BSOD crash to the device USB unplug - Satellite A100

  Hello world

  On my new Toshiba Satellite A100 laptop right out of the box (pre-installed Windows XP MCE), I installed a USB device (a Line 6 POD XT live guitar amp modeling unit). I used the latest drivers available. The instrument is duly recognized and properly installed. I can use it properly.

  Only when I unplug it, or simply turn off... bang! blue screen crash. There is no icon 'Remove hardware safely' available, since it is not a unit of storage memory. Also, it used to work just fine (plug/unplug) on my previous laptop satellite I just replaced.
  Something with media center edition?

  Thanks in advance for your messages.
  Please help me!

  Hello

  Don t think that it s something wrong with MCE, but you know; nothing is impossible.
  The blue screen of death appears mainly due to hardware failure or serious software compatibility issues.

  Try to update the BIOS. Maybe that changes anything.
  Alternatively, you can try to disable the function of the USB ports to save energy. You can do this in the properties of the USB port

  Additional I would recommend contacting the manufacturing of USB device support.
  Maybe these disorders are known for guys

• What is the recovery CD contain - Satellite A100-847

  Hello guys

  I had a few questions on the recovery CD:

  1. what the recovery CD contain? and the other CD, which is called the media something?

  2 - has Windows inside? So can I format my PC to use it? And where can I find the product key (windows key)

  3. what happens if I wanted to use the CD without formatting? etc., install the software?

  Sorry to ask too but my laptop started to bother me. Just FYI, my laptop is satellite A100-847

  Hello

  I'll try to answer your question.

  1 recovery media contains recovery image. Recovery image is a kind of package that contains the operating system, all necessary drivers, Toshiba tools and utilities and some other software like WinDVD or Norton antivir application. Media, that something is not known to me. Perhaps the exact description can help.

  2 Yes there the Windows operating system. Yes, you can format your laptop to use it. You don't need a product key. Just install it.

  3 I don't know what you mean. The fact is that HARD drive will be formatted before you start the installation of recovery. Make sure that all your important data are saved on an external device.

  Good bye

• Problem with playing the games on my Satellite A100

  Hello..
  Thanks for your help on my last question.
  I was wondering if the Satellite A100-756 is compatible for the Sims2.
  I tried to play it, and it works fine until I try to leave the game.
  He died with a "blue screen" and restarts.
  Everyone is having the same problem with that?
  Thanks for your help.

  Concerning

  Have you checked the SIMS support page? This situation is already known?

  If I were you, I will check for some SIMS forum. Maybe other SIMS players have similar problems. There, you have much more chance of finding useful tips.

  Check this one http://www.sims2community.com/

  Good luck!

• Install the new keyboard in Satellite A100 laptop computer

  Recently, we have removed the keyboard on my laptop Toshiba Satellite A100 to clean as some of the keys were sticking.

  After you find the instructions to do this, it was easy enough to remove. Rinse us the keyboard with clear water and made sure that it is completely dry before reinstalling it.
  Now only some keys work about 3 on each line on the right side. Fortunately, enough to have another exact keyboard of an older A70, we have tried to install this one in the place and the same thing, only a few keys on the right side of work.

  We hung a desktop mouse and wireless keyboard and all the keys work fine. No idea why will work only a few keys with two keyboards of laptpp and how do I fix this? Thank you

  Hello

  I m not very well why some keyboard keys work and some don't work properly but if the flat cable that connects the keyboard and the jury has been plugged in properly then you can see this question as if the cable is loose, then you will notice the same problems

  If you are sure that the keyboard and cable are correct, there is a great chance that the malfunction of the card system to 100%

  Welcome them

• How to adjust the video memory on Satellite A100-811

  Hi all

  There, an agency know how to adjust the memory of the video card in the laptop Toshiba Satellite A100-811?
  The physical memory of my laptop is 512 MB, I want to share my 128 MB videocard, nomatter if 384 will remain in my physical memory.

  Your immediate response is much appreciated.

  Thanks in advance
  Jilvir

  Hello

  the Satellite A100 supports an Intel 945GM processor 8MB - 128 MB of graphics memory shared memory, it's true. But
  as far as I know it of not possible to allocate this memory shared manually, it happens automatically.

  If the application running more graphic must map memory then the OS will be automatically increases this value.

  It seems that this laptop came with 512 MB of memory. In my opinion you must upgrade the memory of 1024MB if you want to use the full 128 MB shared memory.

  Welcome them

• Can not find the driver LAN for Satellite A100-165

  Hello

  I have a Satellite A100-165 but he doesn t have installed the Ethernet drivers. I tried to find this driver in the download section, but without success.
  Any help would be appreciated.
  Thank you!

  Hello Juan

  Follow these steps:

  Open http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp and choose

  Type of product > NOTEBOOK
  Family > SATELLITE
  Product series > SATELLITE A SERIES
  Model > SATELLITE A100 (PSAA9)
  Operating system > Windows XP
  Driver type > LAN Driver

  Three drivers will be there. I recommend you to install the latest amended version.

  Good bye

• Drive external HARD USB will not access the files correctly on Satellite A100-033

  I have a laptop Toshiba Satellite A100-033 (PSAANE-03J02GEN), running Windows Vista Home Basic Edition.
  I have a Western Digital passport external hard drive, which has no power source, because it pulls its power via the USB port.

  Sometimes the player works fine, but I often have huge problems to access files on the drive. Opening a folder can make Windows to hang.

  Open an audio file or a Word can do Word or audio software crash. Copy files often fails and in the process can make the Explorer Windows stop working.

  Recently I tried to copy a 33MB file from the external hard drive to my laptop, and while he did it took more than an hour. So many things can happen, none of them pleasant.

  Problems can occur if the external drive is the only device connected to a USB (apart from an external mouse, I always use), or if the external hard drive is one of a number of devices plugged into my laptop - either separately or through a USB hub (powered or unpowered).

  Anyone know what is happening and how I can make my USB external drive usable? I have two other external drives (powered by their own power source) and they work perfectly.

  Why, most of the time, do drive limp along so badly that they are virtually unusable?

  Hello

  One thing is clear; the problem is definitely related to the external HARD drive and not the laptop. It seems that this problem still occurs if the HD has been connected.

  It of really difficult to say what could be wrong with your external HARD drive
  Maybe HARD drive sectors are corrupt, and therefore you can not open folders and some files stored on the HARD drive.

  Have you tried to format the HARD drive? Check this box and try to save and re-open cases.

  In the worst case that the external HARD drive has a hardware malfunction

• How can I install the Microsoft BT on Satellite A100 battery?

  How to install Microsoft Bluetooth Stack?
  I tried the way it is described in the readme file:
  Uninstall Toshiba Stack, reboot, install Bluetooth Monitor 2 (I copy the files needed to C:\Toshiba\MS_Bluetooth), restart.
  After that, windows wants to install Toshiba RFBUS for which I have no drivers.
  There is no way to enter the windows bluetooth [not this control in the Options panel] settings.

  It does not work!

  Post edited by: krystian_s

  Hello

  DeepBlue is quite right. All Satellite A100 units are not delivered with BT on board. Please see the bottom of your laptop. If BT is available you will find a small stick of BT.

  Good bye

• Where can I find the audio driver for Satellite A100 SPAAKL

  Hello

  I'm tired searchning driver sound for my Satellite A100 laptop.
  I see his back to get the model number and it was SPAAKL-OOHOOF.
  I searched the support site and the net but I could find this model!

  so any help to find the sound driver?

  Thanks in advance

  Hello Alsa

  Sorry, but there is no such thing as this model of laptop. Can you please check description of the laptop model again?

• Some issues with the new facility on Satellite A100-691

  Hello

  yesterday, I received the laptop from a friend of mine.
  He had a troyan horse program, so we decided to install everything again. We use the product recovery CD for the Installation of XP, then 'Tools & Utilities CD Rom', but there are now a few problems:

  the following things are listed with a "?" in the Device Manager:

  Ethernet controller (PCI Bus 0, device 27, function 0)
  mass storage controller (Bus PCI 7, device 6, function 2)
  network controller (PCI-Streckplatz 9 (Bus: 5 PCI, device 0, function 0))
  PCI device (Bus PCI 7, device 6, function 3)
  PCI device (PCI Bus 0, device 27, function 0)
  videocontroller (VGA compatible) (6 PCI-outlet (Bus PCI 1, device 0, function 0))

  on the CD are drivers for nvidia, I installed them, you can find it in the softwarelist, but I can't the solution what luck that any other then 800 x 600 or 1024 x 768

  After I installed all the software from the cd rom, I got a message that hkdrv - this driver is absent with Everest there is no listed grafic card, so I can watch, if there is an ATI or Nvidia card in Notepad
  I looked throug google and guides toshiba helf, downloaded all the drivers and updates here, but nothing changes

  The laptop is a Toshiba Satellite A100-691 model N°-PSAA9E-09800QGR

  Plese help me. (o)

  Hello!

  Why have you tried to install the nvidia drivers? The Satellite A100 has an ATI Radeon X 1400 graphics card and an Intel chipset, so you n t need stuff or drivers from nvidia.

  I think that you have installed a lot of drivers, which are not necessary. So in your case I would reinstall the laptop again and if you use the recovery disk, you n t need any driver more.

  If you need drivers, look at the Toshiba site: http://eu.computers.toshiba-europe.com
  There is also the Installation Instructions the software and drivers are recommended.

  Good bye

• What is the password for the BIOS on my Satellite A100-376?

  Hello!

  Yesterday I did update the BIOS of my A100-376 Satellite from Toshiba (PSAAR) to version 5, 90 - WIN. Everything is ok, but now when I'am trying to enter the BIOS Setup by pressing F2 at startup, BIOS ask me a password but I don't know what it is because I do not have. What is the problem? Something is wrong? Please help me.

  Thank you!

  Tiago

  Hello

  are you sure you didn t set a BIOS password or some of your friends/family? Because it is impossible that an update of the BIOS is setting a password. My friend has a Satellite A100-778, while he did the same update, you did and there is no problem.

  Maybe you need to just press 'Enter' when trying to get into the BIOS. Otherwise, I would say do the update again and try to find out who put the password. :)

  Welcome them