Bug really bad iframe, caused by the Magic Mouse or other design Apple entry

Similar Questions

• the magic Mouse loses connection

  I have an iMac 21.5 "running 10.11.6. Recently, I added a to an existing stereo system bluetooth connectivity so I could broadcast on the system. By the way since then I lose my connection to the mouse. I get "connection lost" notification even if the mouse is sitting idle without hands even near him. I tried the suggested pieces of paper, battery replacement and any other thing, I found displayed. Nothing works. As I was typing that I got the message several times, and I'm not even using the mouse! I have another computer in another location and plan to try to see if the problem changes switching. I suspected that the additional bluetooth device could be the culprit, but I tried to unplug and had the same results. It is not a problem with another computer running the same operating system, even if a year or two older hardware. The intermittent mouse problem existed before, but I've lived with him because he doesn't seem to be that bad. Now, I have moved and am in an apartment complex and wonder if there is an interference cause me pain. I do not know to replace the mouse by a non Apple device can solve the problem or if I need to use a WIRED one remedy! The keyboard has never given me problems and with the exception of the low battery notification, it has worked perfectly.

  Hello...

  May be corrupted Bluetooth preferences.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/com. Apple.Bluetooth.plist

  Click OK, and then place the com.apple.Bluetooth.plist file in the trash.

  Can it match the Magic Mouse > OS X El Capitan: use an Apple wireless mouse

  If this does not help, because you are having problems with the battery, Reset System Management Controller (SMC)

• the magic mouse keeps disconnect

  Since I upgrade 10.11.5 OS, (iMac, retina-1 years material) my magic mouse keeps disconnect in the middle of my work - installed new batteries. And, when my computer is asleep, it is not wake up. Everything freezes. Any thoughts?

  The index is with your comment "of the new batteries installed.    Once you have upgraded to 10,11 El Capitan, there is a mouse specially designed for this OS.   It is not really spoken aloud, but the box for the Magic Mouse 2 has a clear statement to be for OS 10.11 (+).   As operating systems go for ever higher, it may make sense to buy new mouse because all subsequent operating systems will need the facilities of this new creature.    The old mouse will work to some extent, but not, it seems, 100%.

• The magic mouse disconnects all working

  Everything working on my Macbook Pro connection bluetooth magic mouse stops every now and then on his own. I have to wait a few seconds before clicking on, reconnect the mouse. It looks like a period of connection, but I can't find an entry in the system preferences, where I can fix this.

  Asked a solution in some Apple stores, a.s.o. iCentres, but nobody has an answer that solves the problem. Someone at - it an idea? The problem started with the implementation of Yosemite.

  As you have upgraded to El Capitan, you are unlikely to achieve the full functionality with your mouse A1296.   The magic mouse 2 has been designed to work with El Capitan and superior and is now generally available.

• Green flashing light on the Magic Mouse

  I thought that a green light flashing on the Magic Mouse 1 (not rechargeable), means that the necessary batteries replaced or recharged.  I put new batteries in, and yet the green light continues to blink.  This is a new mouse, sent to replace their defective Magic Mouse.  The defective mouse works, but I can't get the new one to work.  I can't get support to help me with this. I tried to use the conversation, and they have disconnected while I was writing my question. RRR

  Anthony,

  Look at my answer to the other thread.   It may be better to keep all questions here at the moment.   The other thread is no longer.

• the Magic Mouse that came with my iMac to work but it does not recognize HP USB Wireless Mouse

  the Magic Mouse that came with my iMac to work. I tried to use the HP USB mouse that I use with my MacBook Pro at home, but it does not recognize. I went into the settings but it only sees the mouse Magic Mouse.  I tried configuring it as a PC mouse.  How to recognize the USB of the computer mouse.  I need a HP bluetooth mouse?  I can't work with this mouse, it has a funny scroll for it. It is too fast or too slow.  Help!

  < published by host >

  There is no reason why the iMac should not be able to use a USB mouse. With the mouse connected to the computer off the computer tower and turn it back on. Now it doesn't recognize the mouse? If this is not the case, try a SMC reset.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Sensitivity of the magic mouse 2

  OS X 10.11.3 (15 d 21) model name: iMac model identifier: iMac14, 2 name of the processor: Intel Core i5

  I recently changed to a Magic Mouse 2 and it worked perfectly. Recently the sensitivity seems nave has increased as evidenced by the fact that I have to hover over a link to activate it. How to restore to original operation?

  Hi DCRIOW,

  If you want to adjust the settings of your Magic Mouse 2, take a look at the resource below to adjust the settings in system preferences.

  Using system preferences

  Preferences system systemic control ("global" settings) and is available in the Apple () menu in the upper-left corner of the screen. Preferences system allows you to set things like your resolution screen, keyboard, mouse, sound, taken the printer settings, settings, accounts and more sharing.

  Customize your mouse

  The preferences panel mouse look different depending on what type of mouse you are using. These settings allow you to set the mouse sensitivity to control how quickly the pointer moves on your screen when you move your mouse, and adjust your double-click reflexes. Other controls may be available, depending on the type of mouse you are using.

  

  1. In the Apple Menu, open system preferences.
  2. Choose View > mouse, or click on the mouse icon.
  3. To control the speed of the pointer (cursor) moves across your screen when you move the mouse, click on Point & click and use the tracking slider to adjust the speed.
  4. If double-click speed if poster, you can use the double-click slider to adjust the speed.
  5. To change the action settings, click the tab more moves. You can enable and disable the gestures for blow and the Mission control.

  Configure your Apple wireless devices

  Mouse Magic 2, Magic Keyboard, Magic Trackpad 2

  Follow these steps to configure your Magic Mouse 2, Magic Keyboard or Magic Trackpad 2:

  1. Connect the lightning to USB cable to the port of lightning on the device and plug the other end of the cable to your Mac.
  2. Make sure the switch is in position I. (Green will be visible).
  3. The device appears in the Bluetooth preferences and automatically pairs with your Mac.
  4. The Bluetooth Preferences window shows the status and costs connecting your device. When the device is charged, unplug it for wireless use.

  Note: The Magic Mouse 2 unusable when you are connected to the cable.

  Take care

• I have most of the software UTD and the magic mouse 2.  I continue to have these episodes where Safari zoomed spontaneously and I can't cancel it without hitting the back button of the browser.  Did someone came across this?

  On an IMac 27 "OS is El Capitan 10.11.2 Magic Mouse 2, Safari 9.0.2

  Seen the episodes while in Safari, it suddenly zoomed in and let even me not to scroll the page.  I have to click on the back button to cancel it. It seems to happen spontaneously, but my hand is still physically on the mouse, just I don't do anything with or to the mouse.  Seems to be developed after I went to the Magic Mouse 2.  Any ideas?

  Please, open the mouse in system preferences and uncheck that smart zoom.

• The magic mouse 2 works with iPAD PRO

  The magic mouse 2 works with iPAD PRO?

  No, you cannot use a mouse with an iPad.

• the magic mouse 2 loses connection

  My magic mouse 2 is loaded (88%) and connected via bluetooth to my macbook pro (late 2011, OS X El Capitan 10.11.4).) Sometimes it loses connection and after a short time reconnects, what should I do for him have always connected, I mean without capricious disconnections?

  Hello heide1,

  Thank you for using communities Support from Apple!

  I understand that your Magic Mouse 2 going through temporary disconnects and stops responding intermittently. We know that situations of this kind can be frustrating, but we are here to help.

  To begin troubleshooting, I suggest to read and work through the steps in the following article.

  Your mouse or your keyboard intermittently not responding

  Follow these steps if your mouse or your keyboard sometimes stops responding temporarily.

  Click or press a key

  • Click on the mouse or trackpad, or press a key on the keyboard to reconnect the device to the computer. It may take a while for the device to respond.

  Search for interference of signals

  • Wireless networks that operate on 2.4 GHz can cause interference. Move base stations of phone wireless, microwave ovens and other appliances of 2.4 GHz far your Mac if you suspect interference.
  • Keep devices wireless to 10 meters (30 feet) of your Mac.
  • Avoid putting metal objects between your wireless device and your Mac.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

  See you soon!

• The magic mouse has suddenly got very slow

  As the title says, my mouse works OK, but the answer is really slow and sometimes the cursor jumps and jerks on.

  I tried to clean it, put new batteries and totally forget and then by reconnecting it to Bluetooth, but it still happens. I even bought another Bluetooth mouse not expensive £10 and it works very well, but obviously this is not as nice as the mouse Magic Mouse from Apple.

  Is - this somethiing to do with El Capitan?

  I am running OSX 10.11.3 on a MacBook Pro (15-inch, mid 2010), 2.4 GHz Intel Core i5.

  Thanks in advance for any help.

  This looks like a problem of interference for me.   You have introduced a new electronic in the vicinity.  Don't forget to turn off your cheap mouse when you do all the tests.   See this document for further assistance.

  http://www.idownloadblog.com/2015/07/25/slow-jumpy-laggy-mouse-cursor-os-x/.

• the magic mouse disconnects regularly

  Since last week my Magic Mouse is losing connection with my iMac (OS X Sierra) pretty regularly--several times each hour, sometimes more often - the connection is only lost for 5-10 seconds, but it's a lot of time when you're trying to work. Anyone else had this problem and had been able to find a solution?

  If your Magic Mouse is version 1 (with batteries), it won't be to fully integrate with Sierra.   You can buy Magic Mouse 2 for that.   Because all future operating systems need, you may as well buy now.

• Make a right click of the magic mouse has stopped working

  Right click my magic mouse function does not work. Is it a hardware problem or can I fix it myself?

  Which machine do you use?

  What operating system do you use?

  What version of Magic Mouse do you use?

  Please keep in mind that we still need retail in order to answer the questions... otherwise its speculation that helps the person.

• Persistent problems with the Magic Mouse

  I have persistent problems with my Magic Mouse. He often stops followed (i.e. the cursor on the screen does not move when I move the mouse), or the input button on malfunctions (i.e. I don't click and drag, or cannot right click, or when I click on something and that you hold the button down it doesn't "stick").

  I called Apple and they took me through all the troubleshooting steps (reset the SMC, PRAM, etc.) and I finally get a new mouse. I got a new and have exactly the same problems!

  The ONLY thing that solved the problem by restarting the computer, or logging in and out. But the problem then begins again after anywhere from a few minutes to a few days (the most often within hours).

  Any ideas?

  Here is more information in case it is useful:

  • I plugged a wired Logitech mouse, and to my surprise, it also does not work. I thought that the problem was related to the wireless/Bluetooth connection, but this clearly isn't.
  • I have a Wacom tablet attached to my computer, and it works very well, no matter if it has connected (via USB dongle) wireless or wired (via USB).

  There seems to be something wrong with any particular software/system control the mouse.

• Implementation of the magic mouse

  I have a new 'magical' mouse and although it works via Bluetooth to my iMac 27 mid-2011 "with OS X Yosemite I can't customize.

  When I select advanced in the Prefs system mouse the mouse is not recognized. Icon of rotation only.

  Anyway that I can customize this new mouse?

  Thank you.

  Assuming it's a Magic Mouse 2, it supports only officially OS X El Capitan (10.11).