Bug with control tool and brush tab

Similar Questions

• I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if that brings the circle/round view form, but does not work.  All the I

  I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if it carries the form circle/round in sight, but it does not work.  All I get is a focus.  Can anyone help with this please.  Thank you.

  Remove the caps lock

• "width tool" and brush strokes?

  Hello people,

  I drew a line polymerized with the Brush tool in illustrator CS5, but when I select the "width" tool to change the width, it does not work.

  What Miss me?

  Here are my steps:

  1 Select Brush tool

  2. draw something

  3. Select the tool 'width '.

  4. try to change the width, but it won't work.

  Given that I draw with the Brush tool, the "width" tool can be very handy if I can make it work.

  Thank you!

  I guess you used a calligraphy brush. The width tool only works with nromal lines, artistic forms and brushes model.

• Problem with VMWare Tools and the virtual drive

  Hello

  I installed the test version of "Workstation" and installed a windows 7 x 86 non-virtual DVD drive mapped, which is mounted on D:\.

  Subsequently, I installed all Windowsupdates and after that I tried to install the VMWare Tools.

  But every time I get the message that I should look on the 'virtual' drive on D:\.

  But there is no virtual drive, it is my DVD of the hostsystem.

  Is there a way to mount a virtual drive with tools or install them in another way?

  Thanks in advance

  Taldrit

  Hello

  You can directly install the VMware tool configuration by copying the setting in the machine and manually install the same.

  Try VMware on another machine tool in which you will get the installation... Copies on disk and then move it to your new VM and do a manual configuration.

• Tools and PSE9 tabs

  Thanksgiving in the morning. My question is, why my PSE9 is not some paws like some other PSE9 that I have seen in tutorials and additional tools, such as: Fx, history and tabs to the side or below the tab content layers. Is it a different version of PSE9 or is it a kind of plug-in and if yes where can I get it back.

  Go to the window menu and you can activate several different panels. Also, make sure that you are in full edit, no quick fix or guided edit.

• Just updated to Lightroom and all the tools and brushes that I use is gone

  Can someone tell me what happened, and how can I do back up lightroom to a useful version?  I mainly photograph architecture and white, highlights, shadows, exposure, and black paint brushes have disappeared!  As well as the brush of haze. It is a total disaster.  I'm in the middle of a dozen works and it seems no way to roll back this awful downgrade CC lightroom.

  In the Panel to develop under the Calibration of the camera, the process is set for 2012?  I suspect that you have updated an older process.

  

• How to get Adobe to fix a bug with Digital Signatures and portfolios?

  There is a bug in Adobe Acrobat.  I don't know when it was introduced, but in a few months.  I can sign is more numerically the PDF portfolio.  I don't think that anyone using Adobe Acrobat Pro XI can sign a portfolio.  I reported it to Adobe 11 days.   Every day, I check and I can't get an answer on when they will solve this problem. All I hear is the " issue has grown to our main support team."   This prevents me from doing things that are important to me.

  Does anyone know how to attract the attention of Adobe to fix a bug?  climbing the priority?  If enough people's complaint, is get fixed?

  Don't expect bugfixes in days. If Adobe agree that this is a bug and give priority to fix and the report was at the right time, it can be fixed in 3 months or more, but 6 months is most likely. Only security vulnerabilities would be on a different cycle. This isn't an official response, but a guess based on the observation of Adobe (it's faster than a few years where there was in general that a single bug fix release in each new version, maybe a year apart).

  Certainly, reports of errors more real increase in priority.

• Bug with Adobe PDF and Mac OS 10.6.1

  Hello

  I just got the latest Imac and I can't build more PDF with Xpress 6.5 even I followed this http://kb2.Adobe.com/CPS/509/cpsid_50981.html

  I got the attached message

  Please let me know and thanks in advance for your help

  T & T

  Loc

  Open the folder and just remove the Automator action if there are for Acrobat. And leave the only one in the system. Printing is a great thing system while in the system should work.

  (don't remove any of them until see you if everything works

  (Please note the information is given by an experienced user of Acrobat.) I'm not an Adobe employee).

• I need to upgrade my Mac (MacBook white unibody mid 2010) with a SSD (and iMac mid-2010) and the RAM and SSD

  I need to upgrade my Mac (white unibody MacBook mid-2010) with a SSD (and iMac mid-2010) and the RAM and SSD: I look to buy upgrades site Crucial and OWC site and there is a little difference, in terms of money: it's better to buy the Crucial site or OWC site.

  MacBook, OS X El Capitan (10.11.4)

  < re-titled by host >

  They have good tools to find compatible parts for your Mac models.  The OWC took is here

  http://eShop.MacSales.com/MyOWC/

  OWC tends to have the most detailed information on the Mac.  If I look to the top of the part to OWC and review specifications.  OWC offers often information based on the Mac-specific tests.  If Crucial offer something similar for a substantially lower price, buy it from Crucial.  I'm sure they have a refund is not political, if a part they say is compatible.  I bought the RAM and SSD both Crucial and OWC.  From my experience, be it high quality.

  For the 2010 iMac, OWC also offers a "kit" (with the tools and support) to replace the hard drive of 3.5 inches with a 2.5-inch SSD.  Eventually, if it's a 27-inch iMac, I think that you can Add the SSD instead of replace the hard drive.  And they have self-produced how-to videos on the process, related to many of their lists of products.  OWC provides a lot of information with added value and service for Mac users.

  OWC also offers kits to replace the optical drive on some Macs (including MacBooks) with an SSD (as a secondary internal drive).

• I have CS6 and had CC for dreamweaver, since I had not in CS6 and now I can't use my CS6 after I cancelled my CC? I used the tool and always impossible to use CS6

  I have the suite design CS6 and tried cc that Dreamweaver and Primere Pro. I no longer use CC and decided to uninstall it using the tool unistaller and now my CS6 ORIGINAL programs do not work because a creative cloud window opens telling me to update my subscription... I want more cc and I just want to use my CS6!

  Help...

  I uninstalled with this tool and restarted the fact that like 10 times... and again

  Cloud of reading takes up https://forums.adobe.com/thread/1584746 for some ideas

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• Control Panel and update of Windows fail to boot, Windows comes with Startup Repair tool regularly.

  Hello, we had problems with our computer Packard Bell for some time, but recently it has deteriorated with both the control panel and windows update is unable to start. In addition, we noticed that the Startup Repair appears fairly regularly too. We had to use Packard Bell restore a couple of times as Startup Repair did not resolve the problems. The problem with the control panel windows updated and started after the installation of updates after the last recovery of the computer. I noticed that the Panel works in safe mode, however, windows update does not work. After the course on problem reports and solutions, we noticed several mistakes "Windows update installation problem. When we clicked on a for more details, it appeared:

  A Windows Update was not installing correctly. Send the following information to Microsoft can help improve the software.

  Signature of the problem
  Problem event name: WindowsUpdateFailure
  ClientVersion: 7.4.7600.226
  Win32HResult: 80070426
  UpdateId: 00000000-0000-0000-0000-000000000000
  Scenario: Scan
  SourceId: 101
  Environment: unmanaged
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 2057

  Additional information about the problem
  Bucket ID: 719632728

  We have analyzed viruses and found nothing. Thank you for reading the question, a solution would be much appreciated, thanks.

  Hello

  Frequently, this error code occurs when the software licensing service is stopped. Click Start, type services.msc and press . Click on continue in the UAC prompt. Scroll the list to the software licensing service and click on it. Now click on start or restart option in the left column. Close the dialog box and restart Windows Update.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Problems using the tools of accessibility on PDF interactive with complex tables and fields in form (in AcroDC)

  Hello

  Although I worked earlier in the accessibility check (will be abbreviated as "axs" later) before using the Checker axs documents, what he used Windows and Acrobat XI a year ago. I am now responsible for creating interactive forms that are available on a Mac (platform I prefer), that have been designed only visually in InDesign, then transferred in Acrobat X or XI where someone placed the form fields and then handed to me to settle the tab for end-users order and make them accessible to people with disabilities (Government org). Problem is, some of these documents are extremely dense arrays, in which each cell of the table is a checkbox or a radio button I have several questions:

  (1) the order of reading has something to do with the tab order? (I spent hours to get the tab order works the way it should and do not know if by clicking any axs tool that will change and cancel all my work.)

  (2) I need to mark an entire page, more or less, as a table but when I am in reading of editing tool (TURO), I get the crosshairs of hanging around that object, but when I go to playback control panel, and then click Table, everything is deselected and nothing else happens. My goal is to get to the table to label the lines headings and column editor, etc. What is going on? What I have to do all this in the Panel tags instead?

  (3) in the Panel tags, I see a table with 30 lines, which is what I have visually, but when I select the TRs and TDs nothing gets selected on the form, so I don't know how to get the content of the form "in" these TDs... it is a very complicated document and I'm getting confused. " Not a lot of experts out there on Axs AND Acrobat DC dealing with this and I'm frustrated! There's a guy on Lynda.com including videos watched re: similar topics, but in his case, he got a table which is just text and it is small, and his method is by selecting each cell of the table with the cross and he the tags labeling a 'cell', and then go in the Panel and work on the appropriate type / # Table elements slide autour stuff in the appropriate lines etc. My picture has lines 30 and 13 columns, and approaching the fields of interactive form in most of the cells... This is not practical, but do not know if there is a quick/accurate way to get the table recognized otherwise?

  Any help is appreciated...

  Sorry,

  Very frustrated

  Yes, treating large complex tables can be the chore of accessibility PDF much time and frustrating. First question - these tables of data or layout tables? Several forms are organized visually using layout tables, but do not really present data organized in rows and columns. Marking this content in a table would be run against failure condition Matterhorn Protocol 15-004, "content is marked as a table of information that is not organized in rows and columns. Instead, work in the Tags pane, drag all the elements of content out of the structure of the table and re-tag/organize according to the needs. The Suite of PDF/UA reference has an example of form (document 10) that you can refer to-although its layout tables is relatively low. A simple structure, detroit forward should be easier to fix at a large table and also easier for a user to read assistive technology.

  However, if these are legitimate data tables... I find the reading pane to be worse than useless. The Tags pane sets the reading order for assistive technology. Something that I find useful is to break down a complex table into manageable pieces, clean up the subtables can recombine. You can also consider assessing NetCentric CommonLook - I do not use it, but it has a good reputation for working with arrays. I don't think it's available for Mac, however.