Mirroring of the ports on Dell PC 6224

Similar Questions

• you have a way to block access to the port of dell co.to my computer?

  Dell continues to shut down my computer dell laptop to force services on me.i don't except services so that they freeze or crash my computer.just obtained through reinstalling but it should block dell to access my computer when ever they want.i thinks he can be done.not qualified at this level.

  It is more likely that there is an update from Dell running on your PC that downloads updates.  Check what processes are running and uninstall all updater Dell in your program list.  (If you are positive, you don't want updates Dell)

• Port mirroring for the uplink of 10 GB of PowerConnect 6224

  I need to take a copy of the traffic over a 10G fiber link. The amount of traffic on this link is less than 1 Gbps.

  I am considering using the mirror port on a PowerConnect 6224 for this function. However, I don't know if port mirroring also works on the links to the top of the switch.

  Anyone know if a port 10G uplink on the 6224 can be mirrored on one of the 24 Gigabit Ethernet ports?

  I've been the mirror of able port of a fibre port with an Ethernet port, following the instructions on page 333 of the owner's manual.

  http://support.Dell.com/support/eDOCS/network/PC62xx/en/UCG/ucg_en.PDF

  He took it and did not return any errors. But I see potential for some issues if the fiber port went above 1 Gbps.

  

  Keep us updated and let us know what are your conclusions.

  Thank you.

• Session of the monitor on the chennel Port in Dell P6448

  Hello

  I use Dell P6448 is my access switch with router on a stick architecture. There is a port-chennel between the dell switch and interfaces of the router LAN. Now my requirement is I want to sniff all traffic passes on this switch chennel port end and he mirrored to a free port. It is once I have set the source interface 1 moonitor session? It offers the possibility of physical interface only and port-chennel1 cannot be specified there. Secondly if we try the physical ports in the interface of the source of the session monitor command it gives an error that this port cannot be used as a source interface. I use 3.3.1.10 Image.

  Thanks for the help in advance.

  Ashok Dhaktode

  There is a limitation of the port mirroring. A port channel cannot be the source of a mirror, which includes physical ports in the port channel. You will find that if you get rid of the channel of the port of the individual ports will be able to mirror.

• Port Mirroring a LAG on stacked Dell PowerConnect 6248 s

  Hello

  It is possible to port mirror use as a source, a SHIFT, consisting of 4 ports (2 in each Member of a set of 6248 s PowerConnect stacked). Whenever I'm trying to add the source, using GUI, I get an error:

  Error! There not together "Type" with "Tx and Rx" error occurred in FILTER_MISSING

  This allusion is what filter?

  I can't select a spring, unit 1 or unit 2, members of the LAG, like the gui only shows them not from the ports drop.

  Thank you.

  Unfortunately, the switch is able to mirror individual ports as source ports. You can check this by trials of establishing a mirror session where the source port is not part of a LAG.

• How to access the management of VLANs with a different virtual LAN (Dell powerconnect 6224)

  Hello

  DELL powerconnect 6224 reference.

  I want to access the management of a different VIRTUAL LAN VLAN.

  The management of VLANS is 100 of VLAN. not the routing

  My computer is vlan 60 (192.168.60.10) and I want to connect via ssh or http (192.168.100.1) to manage my switch.

  Thank you for your help on the command line

  The management of VLANS on the 6224 is not routable. So, you will not be able to access VLAN 100 from any other VLAN. However, you can manage the switch from other VLAN IP addresses. So if VLAN 60 has an IP of 192.168.60.1 you can http and ssh to it. And if the VLAN routing is enabled you have access to 192.168.60.1 on the other VLAN.

  See you soon

• Reference Dell Powerconnect 6224 DVLAN-mining (Q in Q)

  I have two sites, one is our data center and the other is our office.

  I want to be able to access the data center to the office network, I need access for 2 VLANs, the ISP has already installed it is fine for this and now there's only the part configuration

  At the office, there is a PC5548 and data center, there is one PC6224.

  Office on the incoming port configuration is:

  tengigabitethernet1/0/1 interface
  switchport mode trunk

  The port for outgoing data center conf is:

  interface ethernet 1/g22
  Description "TELEV6RK".
  switchport mode general
  VLAN allowed switchport General add 3000
  dvlan-tunnel mode

  This does not work, how do I configure ports, do I have to configure all ports or only 1 port IDE oucederomsurlesecondport 5548 and 1 on 6224?

  I got an answer from Dell technical support, on how to do it:

  1. If the marking through ISP is different from DOT1Q then you must change it on the two switches using the command global dvlan-tunnel ethertype and options there are (dot1q, vman or custom)

  2 port 1 and 2 must be port trunk who accept only the 3000 VLAN. Here are the ports that are connected to the ISP.

  3 ports 3 and 4 should be dvlan-tunnel mode configured on them and configured as switchport access VIRTUAL 3000 LAN mode. These are ports that are connected to switches that are for production at both sites.

  4 ports 5 and 6 on other switches must be configured as trunk with tagged VLANs you want to transfer through ISP in VLAN 3000. These are the ports located on the switch of production.

  The topology is here: www.upload.ee/.../Topology-change.png

  I hope that now everyone will have its operation :) Thanks for the help.

• VLAN routing when you use a dell computer 6224

  Hello

  I have a dell switch 6224 with 2 VLANS.

  Management-192.168.1.111/24 Ports 1/g1-1 / g12

  Vlan150-192.168.150.111/24 Ports 1/g13-1 / g24

  I have two ports on the router with the ip address to communicate with the switch (192.168.1.2 and 192.168.150.2). Vlan1 works very well without any problems. I can ping from 192.168.150.2 to 192.168.150.111. I set up the laptop with the ip 192.168.150.113 and plugged in the Vlan150 on port 1/g19. I can not ping to 192.168.150.113 192.168.150.2. The traffic is not going through the Vlan150 in the switch.

  What Miss me? This is my first time setting up a VLAN on these switches. Help, please.

  Config

  console #show running-config

  ! Current configuration:

  ! Description of the system "PowerConnect 6224, 3.3.8.2, VxWorks 6.5.

  ! 3.3.8.2 system software version

  ! Passage mode is configured as disabled

  !

  Configure

  database of VLAN

  VLAN 150

  VLAN 150 1 routing

  subnet of VLAN association 192.168.150.0 255.255.255.0 150

  output

  battery

  1 1 member

  output

  192.168.1.111 IP address 255.255.255.0

  by default-gateway IP 192.168.1.2

  IP routing

  interface vlan 150

  name "VLAN150".

  Routing

  IP 192.168.150.111 255.255.255.0

  output

  level of 00436d6ae2ed27bbe87fa24b73b5a249 user name 'admin' password encrypted 15

  line of AAA authentication login "defaultList".

  the AAA authentication enable line 'enableList '.

  line console

  00436d6ae2ed27bbe87fa24b73b5a249 encrypted password

  output

  line telnet

  connection of authentication defaultList

  00436d6ae2ed27bbe87fa24b73b5a249 encrypted password

  output

  ssh line

  connection of authentication defaultList

  00436d6ae2ed27bbe87fa24b73b5a249 encrypted password

  output

  !

  interface ethernet 1/g1

  switchport mode general

  output

  !

  interface ethernet 1/g2

  switchport mode general

  output

  !

  interface ethernet 1/g3

  switchport mode general

  output

  !

  interface ethernet 1/g4

  switchport mode general

  output

  !

  interface ethernet 1/g5

  switchport mode general

  output

  !

  interface ethernet 1/g6

  switchport mode general

  output

  !

  interface ethernet 1/g7

  switchport mode general

  output

  !

  interface ethernet 1/g8

  switchport mode general

  output

  !

  interface ethernet 1/g9

  switchport mode general

  output

  !

  interface ethernet 1/g10

  switchport mode general

  output

  !

  interface ethernet 1/g11

  switchport mode general

  output

  !

  interface ethernet 1/g12

  switchport mode general

  output

  !

  interface ethernet 1/g13

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g14

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g15

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g16

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g17

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g18

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g19

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g20

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g21

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g22

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g23

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  !

  interface ethernet 1/g24

  switchport mode general

  VLAN allowed switchport General add 150

  switchport vlan allowed General remove 1

  output

  activate 00436d6ae2ed27bbe87fa24b73b5a249 encrypted password

  output

  Hello

  The laptop is probably sending unmarked packages and so you need to change the PVID on the interface so that the unmarked packages are assigned to 150 of VLAN.

  switchport General pvid 150

  FTP://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/PowerConnect-6248_Reference%20Guide_en-us.PDF page 600

• 15-ro36tu HP: hp 15-ro36tu cannot perform mirroring of the screen

  I have a laptop hp with pentium core 15-ro36tu. I tried to connect it to my samsung smart tv, who says that he accepts the mirroring of the screen. So I tried projecting my laptop on the tv screen by going to the project, add a new device. But my laptop cannot detect sometimes. And when he somehow after many tests detect, it cannot connect to it.it says "YOUR SCREEN CONNECTION IMPOSSIBLE". I tried to connect it via another computer hp laptop and it connected instantly. I'm sure that my laptop is not working properly.plz hlp!

  I thank. But u did not understand my problem. I didn't connect using HDMI. I want it to connect using wireless, display which he supports.using HDMI port I was able to connect it.plz help me with the wireless display.
  
  Thank you

• "The port is used by another device. Printer does not print.

  I have a printer Canon D661 on an Ispiron Dell s 545 under Win XP SP3.  Everything worked fine until today when he leaves the impression.  I have uninstalled/reinstalled the printer through Windows and through the uninstalling Canon.

  I have downloaded the latest drivers from Canon, did all my XP, updates my Dell updates driver material and restarted several times than I can count in the process.

  I've stopped and started the print spooler.

  Still nothing will print.  The printer status window insists that "the port is used by another device.

  I ran impression of Microsoft Diagnostic tool, he says that's all right.

  It is a USB port, as the mouse and keyboard.  Nothing else.  I tried swapping USB ports between elements, no help.

  The printer works fine if I plug it into my USB netbook, so it's not the printer.

  I receive the error message even if the printer is connected to the office he "belongs" to.

  Until yesterday it worked fine, same print network jobs on other computers.

  I went home from 11:00 to 18:30 today.  Help?

  Thanks for the reply!

  I tried what you suggested, but it did not work.

  Finally, I got it going.  For some reason even if it was still installed on LPT1 on that question and two other computers, this computer has stopped working.

  I found the installer was not obvious choice to install on USB1 and that was when he started working.

  Interestingly, it works installed on LPT1 on two laptop computers when it is connected in fact on their USB ports.

  Thanks again.

• See the bandwidth for the Port-Channel on Powerconnect & Force10

  Reference Dell dear community,

  Y at - it a command CLI or GUI to see how much bandwidth result after having done a port channel in some port Powerconnect and Force10? Suppose we have 4 port 1 Gb and do 4 ports with 1 port-channel. So actually in this channel port have a bandwidth of 4 GB.

  In Cisco, with the command show interface port-channel 1, we get the result

  switch #sh po int 1
  Port-channel 1 is up, line protocol is up (connected)
  Material is EtherChannel, address is 0064.4026.739a (bia 0064.4026.739a)
  MTU 1500 bytes, BW 4000000 Kbit, DLY 10 usec,
  reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  KeepAlive set (10 sec)
  Full duplex, 1000 Mbps, link type is auto, media type is unknown
  input stream control is turned off, output flow control is not supported
  Members in this channel: Gi0/1 Gi0/2
  Type of the ARP: ARPA, ARP Timeout 04:00
  Last entry of 00:00:00, 00:04:48 output, output hang never
  Final cleaning of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0
  Strategy of queues: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 2000 bps, 3 packets/s
  5 minute output rate 2000 bps, 3 packets/s

  But if we do this command on Powerconnect, the just result inform port that starts from the port-channel.

  Reference Dell #show interfaces port-channel 1 short

  Ch-Type Hash Type Min-links Channel ports local FRP
  -------   ----------------------------- -------- --------- --------- ---------
  PO1 Active: Static disabled people article gi1/0/1, gi1/0/2 7 1 article
  Item in gi1/0/3, item in gi1/0/4

  Type of hashing algorithm
  1 - the source MAC, VLAN, EtherType, source module and port Id
  2 - destination MAC, VLAN, EtherType, module source and port Id
  3 - source IP and TCP/UDP source port
  4 - destination IP and destination TCP/UDP port
  5 source/Destination MAC, VLAN, EtherType, MODID/source port
  6 source/Destination IP and port TCP/UDP source / destination
  7 - improved hash mode

  Can you help us find the answer?

  Thank you

  Kind regards

  Aziz

  The PowerConnect switches do not have the ability to show as much detail as the Force10 can. The RMON tables have an interface use %, what may be the closest we can do on the PowerConnect switch.

  #show rmon statistics

  I've seen some monitoring software which was able to question the switch via SNMP and get some information of bandwidth. However, this can be a bit inconsistent, according to which switch and what software is used.

  The MIBs/OID can be downloaded with the software switch.

  http://www.Dell.com/support/home/us/en/rc959303/products/ser_stor_net/networking/net_fxd_prt_swtchs

• Need help to connect the monitor to Dell Inspiron Dell

  I recently bought a laptop computer Inspiron 17R in order to reduce the use of my laptop Precision M6600. A Dell U2312HM monitor has been used precisely as a second monitor and I want to use with the Inspiron system newly acquired as a second monitor. The different video ports on both of these computers and I failed to get the monitor to work with the Inspiron. While the accuracy using an older VGA connection, the new Inspiron using a HDMI connection. To further complicate the issue, the monitor has several ports to connect to a source of video output, which includes the DisplayPort, DVI, VGA and ports for USB connections upstream and downstream, but not including HDMI. I used a DisplayPort to HDMI Cable adapter trying to to connect the Inspiron to the monitor, but could not produce an image on the screen of the monitor. This continuous monitor to answer correctly when it is attached to the precision via the VGA cable & port so I'm confused as to why I had no luck by attaching the monitor to the new system with the adapter DisplayPort to HDMI. How can the Inspiron 17R be connected to the monitor Dell U2312HM?

  Computer output HDMI cannot convert a monitor of DP (DisplayPort) using a straight through cable.
  What you have purchased is designed to do the opposite.
  Computer RFP out for monitor HDMI in

  Regardless of the port, you will get only ever 1920 x 1080 on the U2313HM. Return this cable. Buy a DVI HDMI to =.
  Computer output HDMI--> HDMI DVI--> DVI U2313HM Cable in

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• Inspiron One 23 (2330) left the port rear HDMI is Indiana only, not RELEASED

  Hello everyone. I have a Dell inspiron all-in-one with Windows 8.1 2330. I want to connect a LG monitor via an hdmi cable, but it does not recognize. I am sure that the problem is the device of Dell, as with other devices, the connection works.

  The Inspiron One 23 (2330) left rear HDMI port is IN , not OUT. It is designed so that you can connect an external device such as a video camera and display the camera image on the screen of the Inspiron One 23 (2330). You will need to connect an external monitor to the Inspiron One 23 (2330) VGA port on the right rear.

  

• [Need help] New Alienware X 51 BSOD when using the Ports of USB 3.0

  Hello world

  Today, I received my Alienware X 51.  After you set up the system, I plugged my external hard drive USB 3.0 one of the 3 USB ports on the back of the unit.  The system immediately blue armored and closed.  I let the system restart normally, only to find he Blue filtered and restarted again.  After the third BSOD, I deleted all devices on the computer and let it restart.  It has not crashed this time.  Always plug the devices back to demonstrated that when 3 USB hard drive was plugged into the system, the PC crashed.  I am able to reproduce this constantly: hard drive goes in, system hangs.

  I stayed on the phone with Dell technical support tonight, but all they could tell me to do is find another USB 3 device for test ports with.  Since I have none is available, I'm looking at the community of users for more help.  For the record, I managed to extract the files from BSOD dump.  Here is the latest in graphical format:

  

  Anyone seen this before?  My troubleshooting course consisted by uninstalling the driver for the Renesas Electronics USB 3 hub controller supplied with the system and reinstall the drivers using a package available on the Dell (http://downloads.dell.com/Pages/Drivers/alienware-x51.html) website.  It did not work.  I also tried to format the hard drive, but the BSOD persisted.  Needless to say, I am ideas.

  The drive works fine in a USB 2 port.  Of course, I am disappointed that I am not able to use the higher speeds of USB 3 port at this time.

  Anyone seen this before?  Any suggestions on next steps?  What information can provide this help?

  Thank you!

  I am surprised that this post was did not yet a member of Dell since there is a patch to do this, apparently, I had this problem when I arrived to an external hard drive a few days ago

  Remove the current driver for Renesas installed on your Alienware then click on the link below

  http://am.Renesas.com/products/tools/introductory_evaluation_tools/starterkits_evaluation_boards/usb_3_demo_card/index.jsp

  or just click here

  • RENESAS USB3 Host pilot 30230 setup.exe

  installation, this will fix the blue screen issue