Bug with fluidity in Mode 16-bit tool

Similar Questions

• a bug with the structure that contains bit fields?

  using CVI 8.5. I tried to set up a structure that contains bit fields. Although the structure compiles, I encounter strange behavior when you access individual fields, while the value of the overall structure seems ok. Here is the structure:

  typedef struct
  {
  Union
  {
  struct
  {
  unsigned int Flag1: 1;
  unsigned int dummy: 3;
  unsigned int Flag2: 4;
  unsigned int Indicateur3: 4;
  unsigned int dummy2: 4;
  };
  unsigned short;
  } flags;
  } flagset;

  When you set the Member 'all' to a value so that one or more indicators, but not all, are false, I still read the individual like real flags, until all flags are set to false.

  I missed something? This definition is really legal?

  Please find attached a file showing the problem.

  The same issue is at stake with or without the ternary operator. It turns out the problem was not specifically with printf, but rather a bug in the compiler that is related to the evaluation of the members of anonymous internal structures. If several internal anonymous struct members are evaluated before the compiler actually do anything with the result - which is the case when passing arguments to a function-, so they will all be evaluates the value that was evaluated last.

  A. Mert

  National Instruments

• I've updated the plan of the photographer and since the download, I had problems nonstop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or should I cancel

  I've updated the plan of the photographer and since the download, I had problems with non stop with fluidity and now the bridge is not displayed large previews, a few thumbnails. I restarted and reset the tool, is there anything else I can do or do I cancel my subscription to the CC and return to the CS6?

  The problem of fluidity can be the result of a graphics card problem:

  Try to uncheck the box in the preferences > performance > graphics processor use, then by restarting Photoshop. If this solves the problem, check with the manufacturer about a possible update.

  On the bridge: when you select an image and press the space bar, what happens?

• If FF 39.0 on a new PC with Windows 7 Pro 64 bits - in the sidebar search results bBookmarks are slow - is new facility there a solution for this?

  Recently I've just set up a new PC with Windows 7 Professional (64 bit) as the operating system. I just imported bookmarks from my PC in one. HTML file, I created from my old PC. Now whenever I type a search term in the search box to refine my search for one of my favorites of many, sometimes even by typing in the term search begins to lag while I'm typing more letters. Search term/terms once entered, it seems to take 15-20 seconds before the results list appears. This used to be almost instantaneous in this same version of FF (39.0) on my old PC 64 bit of Windows 7 (Home Premium) to bring up the results. I already tried to install the add-on called "signed 1.3.1 - 0 maintenance of the premises and this time there really doesn't make any difference that it helped when I got FF 38.0.5 on my old PC to Win 7 64-bit." Can it still be addressed. Please update as soon as POSSIBLE with the solution.

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

• Bug with high speaker on the Satellite C650-144 with Window 7

  I have a bug with my high speaker, so I download driver leatest and nothing has changed.
  But when I use the jack slot it works and when I put it and when I go to the speaker icon in the windows taskbar there is 'activity' because the level moves, but there is no probe on my high speakers.

  For windows everythings works fine, so I don't know what I have to do...
  I went on the Internet on the forum, but there is no solution for my problem!

  Please help me!

  My computer references are: Satellite C650-144 and PSC08E-01100DFR
  Please excuse me for my English...

  Thank you very much!
  Friendly
  aldebordeaux

  Hello

  Simply said; You can listen to the sound using headphones, but can not hear the sound on the speakers. Right?

  Have you noticed this early? Have you installed a few 3rd party applications may affect the functionality of speaker? Maybe some Windows updates can affect this?

  Please check the settings in the control panel-> sound-> the Read tab

  As a last resort, I recommend for recovering the device I want to say, it looks a bit because of speaker, but I strongly recommend to test the laptop with the factory settings.

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• Bug of Linksys WRT54GC Mode of operation of "router"?

  I use a Linksys WRT54GC router and I experience a behavior that I don't expect.
  You give me your opinion?
  This is the case:

  My assumption of "Gateway" or "Router" operating Mode is:
  Gateway mode means NAT that makes invisible LAN subnet side WAN addresses. NAT is disabled by activating the Mode of operation of 'Gateway' to 'router '.

  I have connected a PC (192.168.2.100) to port the router WAN and another (192.168.23.100) PC on a LAN (192.168.23.1) of the router (192.168.2.2) port.
  When I switch my WRT54GC "Router" mode I can't always ping the PC on the site of the side router LAN WAN. SPI Firewall protection and block anonymous Internet requests are disabled. Firewalls on both computers is disabled.

  I saw a similar problem at the forum "Connecting two routers via WAN" 08/28/2008 Victor Tang.

  Don't you think that it is a bug in the mode of operation of the WRT54GC software?

  I reported the bug to Linksys.

  My first experience with Linksys technical support is very good.

  They take the serious problem, ask for the discharge of Wireshark and send me an update of the firmware of the router.

  This fixes the bug with the mode of operation, now I can without NAT on and outside, very well!

  I don't have firmware update earlier because the release notes did not mention my bug, I read in the forum a lot of users having problems after the update of the firmware, so I followed the policy do not update unless it can solve your problem.

  There are some things perhaps worth mentioning:

  You should be careful to use the right firmware for your router.

  Not only the model of the router is too important, the hardware version and too country!

  I've got a WRT54GC, hardware version 1, and it is the type of the EU.

  Of this material, there's also a different US with versions of firmware version!

  The latest version of the firmware to the US type is v1.60.1, the latest version of the EU type is 1.60.0 v.

  Thus, you should take care of this website, you download the update to get the right version and read the release notes. These release notes, you can check if your current firmware version is part of the history of this firmware, so you know that you have the right one. I was so very accurate because many have reported problems in the forum with updates.

  Now I'm able to Exchange traffic between computers and printers in different subnets and I can access the Internet from each subnet gateway I want.

  It is important to think about the configuration of your PC and routing tables.

  The firewall on the computers must be configured on the additional subnet.

  A PC has a default gateway to reach a device on another subnet.

  Most of the time these are devices on the Internet, so if you create additional internal subnets that your traffic will be by default will be send to the Internet and will be lost. To define additional gateways where your additional subnet can be found to avoid this.

  This can be done on a PC with the command: route add (IE 192.168.23.0 mask 255.255.255.0 192.168.2.2) or you define a static route to your router (the latter is preferable).

  The problems I've had, forced me to consider how does networking, with the help of the users on this forum, I would conclude that this is a bug, with the support of very good Linksys everything now works as expected.

  Thank you.

• Switch Cisco 2960/3560 = &gt; recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

  I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

  I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

  A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

  I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

  Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

  ------------------
  Information System
  ------------------
  Time of this report: 07 25, 2012, 19:06:02
  Computer name: RAIDER
  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: P67A-UD3-B3
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
  Memory: RAM 8192MB
  Available OS memory: 8176MB RAM
  Page file: 2861MB used, 13487 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  -------------
  Sound Devices
  -------------
  Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: Yes
  Default voice playback: no
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  ---------------------
  Sound Capture devices
  ---------------------
  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.
  Driver name: USBAUDIO.sys
  Driver version: 6.01.7601.17514 (English)
  Driver attributes: Final retail
  Date and size: 2010-11-21 13:23:47, 109696 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: No.
  Default voice Capture: Yes
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Hello

  In Services, verify that the Windows Audio service is running and set to automatic.

  a. Click Start and type Services and press ENTER.

  (b) ensure that these services are defined accordingly.

  c. right-click the service, and then click Properties.

  According to the DXDiag, there is no default sound capture selected.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes

  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

  Capture audio by default: No.

  Default voice Capture: Yes

• Setup error ODAC 12 c R4 client on the same machine with Oracle 11 g 64 bit for Windows database

  I have Oracle objects and mobile application development with:

  Windows 7 64-bit OS

  Base Oracle = C:\ORA

  Database Oracle 11 g 64-bit 201, home = C:\ORA\DB11G201

  I was running in Visual Studio 2010 and the ODAC customer Oracle 32-bit in another home = C:\ORA\DB11G201CLIENT32

  All was well for a few years on that set up.

  I decided to upgrade to Visual Studio 2013 and .NET 4.5

  Deletion of Visual Studio 2010 and installed Visual Studio 2013.

  I did a normal uninstall of the Oracle 11 g 32-bit client using the rebooted, Oracle Universal Installer.

  The customer old house was gone.

  I downloaded the ODP.NET12C 32-bit Oracle with VS tools R4 and began the installation of the client.

  I selected English and built-in OS account

  I chose Oracle base = C:\ORA

  I chose hone Oracle = C:\ORA\DB12CR4CIENT32

  But I encounter the error:

  [INS-32104] User Oracle Home specified is not the owner of the Oracle Base specified.

  The owner of C:\ORA's ADMINISTRATORS.

  When should I do?

  For guests of 12 c, opened a NEW BASE and a NEW HOUSE?

  Created an ACCOUNT to STANDARD USER and the select statement, but keep c:\ORA and the new C:\ORA\DB12CR4CIENT32 of the House?

  I'm a hold out for migration to Oracle 12 c database because they thrown into the very useful tool Oracle Database Control and replaced by something watered down.

  So I like to keep the Oracle 11 g 64-bit database.

  but Visual Studio 2013 support, use the 12 c R4 32-bit and 64-bit support drivers unmanaged.

  I would use (and use) Managed drivers, but they do not work in database 11g FIPS-140 active environments.

  Thank you for your help and comments.

  Hello

  This is expected because you install 12 c in Base Oracle who has home 11g.

  From 12 c, the installation program has promoted "Oracle Home User' where you can perform the installation with built-in admin user or a secure non-admin user.

  As documented at https://docs.oracle.com/database/121/NTCLI/install.htm#NTCLI1283

  "Oracle 12 c Release 1 (12,1) database client may not share basic Oracle with houses of the Oracle database versions, such as Oracle Database 11 g Release 2 (11.2) and sooner."

  Please see the information listed in the link above for more information.

  Bascially, you need to install in a different Oracle Base and can have all this work.

  Kind regards.

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius

• Y at - it shows a bug with Hide and regions in 4.1.1.00.23?

  Hi all

  I tried to put a subregion Hide and Show area on a page. It is supposed to have a subregion of the form of each side (i.e. above and below).

  'View' of the region will show a "View only" control with a text and a picture inside.

  When I create the subregion Hide and Show area and add the control. everything seems to work as expected. However, when I then moves the subregion so that it is now between the subregions two form, 'view' is no longer something watch. The arrow changes, but that's all. It's as if the display control had ceased to exist. Move that the subregion any where from there does not change the behavior - show it only control is not displayed.

  Does anyone know if this is a known issue with 4.1.00.23? If so, is there a workaround?

  Thank you very much

  PT

  There seems not to be a bug and it seems not be a workaround.

  To recreate (at least in version 4.1.1), in the tree, create two subregions of form and add some controls. Create a subregion Hide and Show, and then add a control. If you run the page now, it should appear normal (i.e. the content in the skin and see the subregion will be visible when you click on show). Now, move the sub-region Hide and Show via drag and drop to between the two sub-regions form. If you run the page now, it should appear that there is no content in the skin and see the sub-region, despite the fact that, in the design view control is always there.

  See the bug itself, swap component mode. You will notice that even if the sequence of sub region numbers appear correct, the physical order of the sub regions will always be as they were when the subregion to hide and see the creation.

  Thus, it will look something like this:

  Shape 90 1 sub-region

  Subregion 230 form 2

  100 hide / display the subregion<-- in="" tree="" view,="" this="" will="" appear="" to="" be="" between="" form="" sub="" region="" 1="" and="" 2,="" in="" component="" view,="" it="" still="" appears="" at="" the="">

  To fix, go back to tree, drag hide and show of the subregion at the bottom, return to the view of the component, change hide and show of the subregion it and manually change the value of the sequence to a value between Sub regions 1 and 2 form. This will be:

  • go hide and show the sub-region to form Sub region 1 region 2 Sub form
  • the content of the Hide and Show under region now appears when you click to perform the operation to see the

  Hope this helps someone someday.

  PT

• Lightroom 6: Crop Bug in Lights Out Mode

  I just upgraded to Lightroom CC/6.  When I'm in stand-alone mode reframing, I hit back to run harvest, and darkens the entire image area.  I leave the stand-alone mode to see the image.  I use this workflow, please fix this bug!

  Dave

  I duplicated it 10.9.5 and filed a bug with Adobe.

• Someone at - it a bug with correction of red-eye in LR 5 of experience?

  No matter what I, whenever I try to use the red eye correction tool, I get the message "can't find red eyes.  Even in images where the red eye is huge and well visible.  Has something changed in LR 5 it would cause?  I have red eyes Correction enabled.  Does anyone else know this?

  I am a rather new LR user, so I would appreciate someone pointing me in the right direction before filing a bug report.

  Thank you!

  | > "Someone meet a bug with a fix red eye LR5?

  Yes - I used it on a big spider once - worked very well!

  Sorry, but no: it's always worked wonders for me.

  You don't realize that you want to drag around a space big enough, rather than just the part red, right?

• Bug with the donation page today

  You have a bug with your fundraising page. I have selected $10 and transferred to Paypal to $3. I tried again and made sure to click twice on a $10. I got the same results. I thought you should know.

  Hi el_nik,
  I filed a bug to prosecute for the page to donate. However can you please confirm that this always happens after that you remove the cookies from the page?

  • How to clear the cache of Firefox