build a subset of spare board
Hello
I want to build a subset of the table replace but I can't.
I have tried different methods to create without success. My question is where to put in my program, what to insert as an n-dimensional array and how to connect the index and my new elements in the true and the false case.
The size of the table i want to be 1 x 24, the index comes from a counter, new items are the result of a loop in a housing structure. They're all locked up in a while loop. The structure of the deal for the loop and the counter became real every 2 minutes.
Here is a picture of my program.
Concerning
This is a common problem. Whenever you loop you start with the same table, so the behavior you describe. Fix it, change the connection of tables Initialized in the loop of a shift register and feed table replaced on the side of the exit of the SR. The SR powering the newly modified table the following loop, I bet that's what you want.
/Y
Tags: NI Software
Similar Questions
-
Spare board Pavilion G6 numbering system
Hello
Looking for the correct spare part number for a replacement for my G6 Pavilion System Board
S/N: 5GC1450GYC
Product: A3J86UA #ABC
Model: G6-1C74CA
Thank you.
Hello
Please see the following link that shows all THE parts for your machine to the Canada:
http://PartSurfer.HP.com/search.aspx?SearchText=A3J86UA
Kind regards.
-
Is it possible to build a sensitive calculator on board?
I built calculators in Flash, and I'm new on board. Will be it someone please point me in the right direction?
The #4 post (source), here's a start: computer.zip - Box
Resize your browser to get the reactivity.
- Built with 5.0.1 edge (edge animate CC 2014.1.1)
-
Build/update dynamically the table 3D
Hi all
I'm having a problem with the dynamic generation of a 3D of the following set of data table:
x: {1,2,3,4,5}
y: {1,2,3,4,5}
Z_1: {1,2,3,4,5}
Z_2: {1,2,3,4,5}
Z_3: {1,2,3,4,5}
Z_4: {1,2,3,4,5}
Z_5: {1,2,3,4,5}
where there is (5) Z amplitudes associated with each measurement location. What I am able to statically (from the above values x and y tables 1 d and 2D table Z) is to create a 3D Board made up of x and is indexed intensity to the graphic format of the 2D tables. Each page of the table corresponds to each of the 5 Z amplitudes measured at each location. In the attached VI, the Array Build function works perfectly for the static case where the entire data is available. I followed the example of a another discussion forum will be subject to the provisions of nest two loops construction 2D array in the inner loop and incrementing the pages on the outer loop. The static situation is resolved.
However, my goal is to graphically present data he is taken, point by point, to the user. The other attached VI simulates this scenario, incrementation of x and y positions based on the measure button. Z matrix indicator shows that the 2D Array (each individual page) is in the proper format. The construction of the 3D picture is dynamically where I'm having problems. I tried to build table and replace a subset of table, but none of these functions to produce the desired result.
In the case of building table, 3D table is correctly based on the first measure: for x = y = 1, 2D array page0 is set Z_1 in position (1,1), page1 has the Z_2 value in the position (1,1), page2 Z_3, etc.. However, on the second measure, as expected, the berries are concatenated page5 have Z_1 values in the (1,1) and (2,2) positions. This result is properly formatted, however, should the counted array 3D page is limited to 5 (page0, 1, 2, 3, 4). So ideally, page5 should in this case replace page0. So build array results in the correct format but concatenation is not desirable.
The subset of spare board was made with the index of the page (outside of the loop) number to specify the subset of the 3D Board needs to be replaced. The result was an empty 3D array.
Thank you any help to solve this problem.
kmsk wrote:
Any suggestions on how to handle filling out table 3D of unknown size?
If the size of the final table has a reasonable upper limit, you can initialize an array of slightly oversized, then keep using the subset of the table replace. It will be much faster and more effective memory than gradually more and more large networks.
When the purchase is made, you can cut to the final size.
Aircraft add to a table 3D using 'insert into array' or 'Build array' (favorite?), cause memory frequent shifts and might slow down your code by orders of magnitude in casing of excessive fragmentation of memory.
-
Suggestions to maximize the performance of loop of RT
I've attached a screenshot of a small portion of a RT data acquisition and treatment program. This loop treats 1 second blocks of data from a FIFO RT but very rarely (about once per day) the loop is slowing to the point where he is not able to track the data blocks 1 second coming from the producer loop (not shown). Normal loop iteration time is about a half a second, but when he falls behind, iteration rate slows down until almost 2 seconds and does not recover.
The incoming data for the treatment are an array of 14 waveforms, 102400 each of the samples.
1 channel is peeled off very early for the treatment of tachometer. For other analog channels, there are a few calibration and light filtering/RMS calculation then the data is sent to an another RT FIFO. Then the analog channels are highly filtered, decimated and sent an FFT / unit conversion/integration VI. The FFT results are transmitted over the network and then checked for overtaking in VI connected to the shared variable of the network 'fireplace data '. Step much more time of the whole process seems to be the wave filter vi form, just after the RT FIFO first write operation.
I'm looking for suggestions on improving the performance and the deterministic nature of this loop. So far, I've only tried to turn off debugging and reentrant inline, all the vi if the sub vi supports. These measures have helped, but I see the question coming. I'm willing to try anything, so just point out something that does not look quite right. I will be happy to provide more details on one of the vi if this will help.
I could considerably improve the performance by using the place in the structure of the element for the same vi, calibration and decimation. Then, I replaced all build tables with a subset of spare board. Finally, I have pipelined loop into two distinct stages. Since the target RT uses only one heart, so I don't get a multithreading performance gain, but it seemed a little better job, I don't know why...
-
Hello
I am trying to create a time signal after taking samples, but I can't.
I'm trying to store the values sampled at a subset of spare board, I used different methods and sometimes store the last value sometimes nothing.
I think I made a mistake at the entrance as an n-dimensional array.
I've attached the last method that I have used an image...
I would be very grateful if you could help me
Concerning
The simple solution is to just the output of your operation of reading your wire loop border and activate the auto-indexation. This will give you an array of values. You have only 1000 samples, so that won't be too taxing in terms of memory overhead. If you want to pre-allocate the matrix (as it should be for the large paintings), then the distribution should be done outside the loop and then connected to a shift register. Inside the loop, you use replace table subset.
Just curious: If you have a waveform within the loop table, why do you need a graphic to the outside?
Note that the property of the dt of the timed loop is in ms, but the pile of waveform dt component is in seconds.
-
convert 1 d undulating 2D signals
My problem is that I want to write a graph of daqmx writing that will be read by daqmx read. The way I have it now is a form of wave 1 d. My code is attached with the post. My goal is to create a waveform of 8 channels of all zeros, then select what channel I want to choose to apply a waveform. If I choose channel 1 and 3. These two will be affected by a sine wave, and the rest will be a waveform of all zeros.
I mean if I have a waveform of all zeros and I feed him to the subset of spare board (upper receiver) and I have an actall waveform and feed to the subset of table to replace (low sink). I used a 1 d numerical control or index of the ListBox in the new array. If my index value is 1 and 3. This means that row 1 and 3 that have been all zeros will be replaced by the waveform (sine wave) and the remaining lines (0, 2, 4, 5, 6, 7) will always be a waveform of all zeros.
But what to display, since my waveform is a 1 d array, I can't show more than one waveform on the chart. How can code this in a way where I get a table 2D waveform for each channel. I know I can't write a waveform daqmx writing 2D array, but what can I do if I choose a multiple waveform to display. At the moment each chart are displayed one after the other. seet photo
Thanks in advance. See attached picture
Note attachments removed by the request of the user of the admin-
-
Hello
I need out of loop (several table string) data IN table 2D. I use Replace subset of table inside the loop (after table initialized). Exit works (I see each string right step in his place), but each RollBar according to clear all the previous channels 0 0 0. Finally stay only the last string in the results table (see figure). Output to a file works perfectly.
Similarly, no results outside of the loop.
WHY?
I am a beginner...
You use the same table to start each time, not the last update. Initialize the array outside of the loop, and then assign the loop filter in the registry to offset. Then, as now, use the spare board and the output power for the passage of right to register.
/Y
-
My new iPhone has a hardware failure, or iOS this buggy?
Hi all.
This is my first time on these forums that I thought I could try. I recently bought a 6 s 64 gb unlocked (nine from Apple) iPhone on February 26. It came with iOS 9.1, and so as soon as I got it, I plugged into iTunes and updated to 9.2.1. Since I got my phone, it was glitch as *, and not what I heard about Apple being ecosystem. The last Apple device I owned was an old iPod Touch 5th generation I used as an advanced MP3 player. I don't remember iOS 6 and 7 is this glitch. None of my questions are reproducible, because they occur randomly and are not a model for them. They are random glitches, and several glitches that I attended with TouchWiz (for all Android users out there, you know what I'm talking about). I must still EVERYTHING breaks down at the moment, experience that is the stability of iOS, that I've heard, but I still have a bug free experience. Those bugs break transparent experience, making me almost want to return the unit. I tried to do a reset with iTunes and then reinstall all my data in the cloud (images, data, application, etc.) to try to separate myself from all the bugs that may be carried over to a restore from a backup. The cloth did NOTHING. I also tried running the beta of iOS 9.3 when it was in beta to try to fix, but nothing helped. Then I restored via iTunes and downgraded, by first removing the firmware on my computer so that it can be redownloaded once more in order to fix a corrupted download. I'm a loser. I don't know what the problem is, and I hope this isn't a hardware problem.
I like to consider myself as tech his life, that I have a job in a computer SCIENCE Department, and I build computers in my spare time, even though I'm relatively new to the iOS ecosystem and I'm looking for outside help, help that Apple technical support would most likely pass a hardware problem, but before I jump to conclusions, I would like to hear some outside opinions.
So my question to you all, it is iOS lossing is the way that it was and be super buggy, or is it my phone having a hardware failure (GPU, mobo, etc..) I would like to have quick answers, as these bugs make me consider going back to Android, even if I chose to go iPhone for a reason.
If you did a clean reinstall - then you have done most of what we offer on these for a
Most of us have had iPhones for years some since they first were introduced and not, what you say is not normal by any stretch of imagination and yet no manufacturer of the device is completely free of errors
My suggestion would be to take over the store that you buy and see what they have to say
-
This is another one of those things that could be an exchange of ideas to some and one bug for the other. If I have a table 1 d, and I use the Index function, it starts at index 0 without having to connect anything to the terminal index. If I use a Structure of elements in Place and choose the Index and the spare board, I get a broken arrow if I leave the terminal wired UN index.
Also if I am wiring an index with a value of 5, when I expand the bottom I expect for the element index 6, 7 and 8 and continue to the size of the index service. This is once again where the native function of Index behaves differently from the index of PEI and replace it. Is this a bug? Is it an idea of how the International preliminary examination should work?
It was already suggested here - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Provide-good-defaults-for-unwired-indices-of-the-array...
And here (which covers a slightly different behavior with > 1 d tables)- http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Allow-unwired-index-for-quot-Array-Index-Replace-Eleme...
We also had a discussion that addressed the topic of the behavior of the IPES here - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Set-index-inputs-on-LVOOP-array-element-accessors-to-R...
-
Remove the clicked point of Listbox (single column)
Hello
It seems a lot of posts on clear lines of the programmatically multicolumn listbox but not the only column listboxes.
Woth the help of Martins and GerdW, helped me build a subset of a ListBox with items clicked in a reference list
Make a table of items clicked in a list
. How it adds a feature to delete just in case rather than the deletion of the entire list and do it all over again.
Thanks in advance.
Have an array of strings to the "REF" enter in the list box and store it on a shift register. When you remove an item (for example, for an event), remove this item from the list (using the removal of the table) and write back to the property Ref of the listbox. A single-column list box works exactly the same way as a multicolumn listbox.
(Excuse the broken links to properties - what happens when you create an excerpt)
-
HP 14-d054TU: 14-d054TU Energy star HP laptop
Experts from HP that I need to replace my defective hp 14-mother d054tu but im not getting the motherboard detached. Another motherboard can fit in my laptop HP 14? The current motherboard is not reading HARD drive and optical drive (CD). Help, please
Hi @Lucx
You are welcome!
If you go to the HP part Surfer Web site and enter your product G8D11PA number, you will get your PC card details:
http://PartSurfer.HP.comIt's part details card mother HP for your model-
Part #: 755186-501
Description: SPS - MB UMA CELERON N2815 STD
RoHS: COMPLY_2.05Go through page 25 of the manual, 747243-001 heatsink of heat.
When I went through the page 26, 73, I could not find the motherboard Intel Celeron N2815 UMA HP part number.
But the part number 747236-001 is pregnant base and no jury - through page 27, 34 in the manual.
Usually the number of spare board would be stuck behind the RAM, you can see when you get out of memory sticks.
Concerning
Visruth
-
DeepLinking to the pages of single edge
Hi all!
I'm looking to build a simple website on board animate and so far everything is going surprisingly well.
However, I have a slight problem / problem...
When I navigate from one page to another URL of course remains the same.
I wonder if there is no technique 'deeplinking' - or similar to the one we used for Flash projects.
In short - I want to achieve is simple URL change while you browse a website, for example. domainame.com/Home/ domainame.com/gallery/ etc...
Please help if you can
Hey, Nephilim,.
Keep in mind that this program is called "Leading edge" - and it's focus is really on animation, only not on creating fully functional, all features of the websites with a single click. That being said, since the program is built on javascript, you can use the desired, 3rd party javascript libraries to hack fully operational set of Web sites. This requires some basic knowledge of javascript - if you have implemented swfAddress in Flash AS3, you can probably implement one of the 3rd party link deep/story plugins jQuery - basic concepts are the same, even if the code syntax is slightly different. In fact, here's a plugin of jQuery history built by the same people who built swfAddress:
http://www.asual.com/jQuery/address/
I created a quick example and simple plugin address jquery asual above (if you use it on a production project, please visit their donations page). This example shows the hashtag via click of a button and then using the library above to listen to this URL change and react accordingly. It also shows how to listen back/fwd buttons and using the library to respond to these events. It also shows the analysis of the initial url to deep links and react accordingly.
example of root:
www.timjaramillo.com/code/Edge/deeplink_back_fwd_button
deep link example (do not take into account the extra space between the o - n at the end - the forum is the addition of this space):
http://www.timjaramillo.com/code/edge/deeplink_back_fwd_button/#Section2
deep link example (do not take into account the extra space between the o - n at the end - the forum is the addition of this space):
http://www.timjaramillo.com/code/edge/deeplink_back_fwd_button/#section3
Source:
www.timjaramillo.com/code/Edge/_source/deeplink_back_fwd_button.zip
Good luck and mark this as Correct puppy!
-
Dell/Logitech Keyboard KM714 work with XPS 27 AiO?
My new XPS27 all-in-one was excellent, once a few kinks have been developed. It comes with a combination of keyboard and mouse Logitech - model KM714 from Dell brand. There are multimedia keys accessed via the Fn key; things like play, pause, volume, volume, mute. The fn also allows common functions to win 8 as research, charms bar, etc.
Win 8 functions very well, but the multimedia keys are not. They are not operational. Dell support had updated me firmware, but still no luck. They then sent me a new keyboard, the same model. Still no luck.
I was wondering if anyone else with an XPS 2720 has a KM714 that works? On the Dell Web site, http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=332-1396 is not actually list the 2720 as compatible. Information on a site Web will be nothing again; and seem strange that Dell could consolidate an incompatible keyboard with a machine high range.
Anyone out there with a KM714 similar problems?
Thank you all.
So finally, after completing just reinstall the drivers, keyboard is finally controlling the media parameters. Went to a store to Microsoft where they had 27 XPS on screen and they suggested to just try all the drivers up to what it worked. I don't approach it very scientifically unfortunately only a few times, but this last time I reinstalled about 5 variant of shazam and video card chipset.
Oh Dell, you your back orders, then rush apparently your builds with old drivers on board. I got keyboard does not. I got touchscreen fail; I loaded the drivers who we 6 months newer than those installed at the factory...
What happened to your Dell? In any case, my problem is on.
-
Where can I get the spare parts (circuit boards) for my HP 2509 m monitor?
Where can I get the spare parts (circuit boards) for my HP 2509 m monitor?
Hello tsmit32,
Here is a link to the parts list of what HP considers to be user replaceable.
Replaceable parts by the user (Europe, Middle East and Africa)
Since the part is not on the list as a replaceable user then HP does not provide the part for sale. The circuit boards are going to be hard to find, perhaps ebay and other online retailers research is your best option.
The other option that you have is to create your own heel to tear the other monitors that ppl may be getting rid of. If you can find a job of monitoring of 2509 m on ebay with a fairly cheap crack screen then you essentially buy the guts and that's what you're looking for.
Maybe you are looking for
-
Question about Director.
On the movie maker, rather than see my pictures, it has a red X on the boxes where images must be. Why is this?
-
Original title: cannot start computer Cannot start computer This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the pro
-
filmmaker will not completely save in wmv format...
I can see my movie in the slide show and change the format, but when I go to save the file to .wmv format, it takes about an hour to 20 minutes of video, and the only parts of the video will be saved. I only get pictures up to a point, then it goes
-
BlackBerryMessenger: Automatically send Messenge.
Hai to developers BBM, Accroding to the customer's requirement, I send data by default for receiver without clicking on option to send a Message to the menu list. Means that I took the default message and without opening the window of cat , I send th
-
images of camera/iphone in-store photo in windows 7
now when I plug my camera or iphone into my computer the photos go straight to movie maker. I want them to go to the photo shop.