Replace and index space
This is another one of those things that could be an exchange of ideas to some and one bug for the other. If I have a table 1 d, and I use the Index function, it starts at index 0 without having to connect anything to the terminal index. If I use a Structure of elements in Place and choose the Index and the spare board, I get a broken arrow if I leave the terminal wired UN index.
Also if I am wiring an index with a value of 5, when I expand the bottom I expect for the element index 6, 7 and 8 and continue to the size of the index service. This is once again where the native function of Index behaves differently from the index of PEI and replace it. Is this a bug? Is it an idea of how the International preliminary examination should work?
It was already suggested here - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Provide-good-defaults-for-unwired-indices-of-the-array...
And here (which covers a slightly different behavior with > 1 d tables)- http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Allow-unwired-index-for-quot-Array-Index-Replace-Eleme...
We also had a discussion that addressed the topic of the behavior of the IPES here - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Set-index-inputs-on-LVOOP-array-element-accessors-to-R...
Tags: NI Software
Similar Questions
-
original title: Space cadet 3D pinball
Pinball Space cadet is not not available for windows 7. is it possible to load and execute space cadets in windows 7 on a Windows XP disk. then running in a mode of compatibility for Windows XP or 95. I have a relevant disc that I purchased when using XP (and seriouly consider replace Windowsd 7 with). If it is possible, are there problems to download it.
Try this: http://mspinball.weebly.com/download.html. He was installing a short test, and it works (download and installation may alert you to "Unknown Publisher", but various analyses did not find anything harmful). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")
-
"Solve the problems of search and indexing" Windows Search directories
When I try to search show no results. When I try to solve the problem and perform "Troubleshoot search and indexing", the problem is not resolved automatically and the following message appears: problem encountered incorrect permissions on the directories of Windows Search
Hey Dalton,
Deactivation and activation then Windows search of offers to activate Windows activate or disable can help resolve the issue.
Perform the steps mentioned below and see if it helps.
a: Type of Windows features turn on or off in the start search box and click on enter.
b: uncheck Windows Search
c: restart the computer.
d: Type of Windows features turn on or off in the start search box and click on enter.
e: Now activate Windows Search, and then restart the computer.
f: Then click on Control Panel > Folder Options > view TAB > enable Show hidden folders files - Open C: (root drive) with windows Explorer - right click on the ProgramData folder > Security TAB > advanced > change permissions > check "replace all child object." > check if the user of the system, Admin, set to full control > Edit creator owner > check full control > close Edit > Apply > wait so 'YES' – and then click OK > OK
g: Now, check if the indexing works.
Good day!
Answer please if you face concerns.
-
Page and index of the files in different location
I have page index files and on the other drive and unable to move to another server where all objects are in the same folder app than what we have now (calc and otl in a player and page files and index files in the other drive)
can anyone suggest me any methodoutside the suggestion of Johns, you could also create folder in another player if you have enough space for page files
: \Hyperion\AnalyticServices\APP for version 9 \EPMInstall\Oracle\Middleware\epmsystem2\EssbaseServer\app for version 11 (might be missing some trail but eventully you it will do) This also works
-
New tables and indexes created do not appear in the view dba_segments
Hi all
I created 3 tables and indexes, but these items do not appear in dba_segments views. Is this a normal behavior? Previously, with dictionary managed tablespace, I can specify the least possible to create, at the table/index is created. But I don't know how works the locally managed tablespace. Please do advice. Thank you much in advance.
I am using Oracle 11 g R2 (11.2.0.1.0) for Microsoft Windows (x 64), running on Windows 7.
To reproduce this problem, I created the tablespaces as follows:
CREATE TABLESPACE CUST_DATA
DATAFILE ' d:\app\asus\oradata\orcl11gr2\CUST_DATA01. DBF' SIZE 512K
AUTOEXTEND ON NEXT MAXSIZE 2000 K 256K
MANAGEMENT UNIFORM LOCAL 256K SIZE MEASURE
SEGMENT SPACE MANAGEMENT AUTO;
CREATE TABLESPACE CUST_INDX
DATAFILE ' d:\app\asus\oradata\orcl11gr2\CUST_INDX. DBF' SIZE 256K
AUTOEXTEND ON NEXT MAXSIZE 2000 K 128K
MANAGEMENT UNIFORM LOCAL 128K SIZE MEASURE
SEGMENT SPACE MANAGEMENT AUTO;
CREATE TABLE CUSTOMER_MASTER (CUST_ID VARCHAR2 (10))
CUST_NAME VARCHAR2 (30),
E-MAIL VARCHAR2 (30),
DATE OF BIRTH,
ADD_TYPE CHAR (2) CONSTRAINT CK_ADD_TYPE CHECK (ADD_TYPE ("B1", "B2", "H1", "H2")),
CRE_USER VARCHAR2 (5) DEFAULT USER,.
CRE_TIME TIMESTAMP (3) DEFAULT SYSTIMESTAMP.
MOD_USER VARCHAR2 (5).
MOD_TIME TIMESTAMP (3),
CONSTRAINT PK_CUSTOMER_MASTER PRIMARY KEY (CUST_ID) USING INDEX TABLESPACE CUST_INDX)
TABLESPACE CUST_DATA;
SQL > SELECT TABLE_NAME, nom_tablespace
USER_TABLES 2
3 WHERE TABLE_NAME LIKE '% CUST. "
TABLE_NAME, TABLESPACE_NAME
------------------------------ ------------------------------
CUSTOMER_MASTER CUST_DATA
SQL > SELECT INDEX_NAME, nom_tablespace
2 FROM USER_INDEXES
3 WHERE TABLE_NAME LIKE '% CUST. "
INDEX_NAME TABLESPACE_NAME
------------------------------ ------------------------------
PK_CUSTOMER_MASTER CUST_INDX
SQL > SELECT nom_segment, SEGMENT_TYPE, nom_tablespace, BYTES
2 FROM WHERE USER_SEGMENTS;
no selected lineAn extension to what Sybrand said:
There is a parameter called differed_segment_creation, who runs the behavior.
If it is set to TRUE (the default), no segments will be allocated until you fill your table / index.
Try to insert a row. You will see your table and index in dba_segments.
See for more information
http://docs.Oracle.com/CD/E14072_01/server.112/e10595/tables002.htm
-
Creation of primary keys, foreign keys and indexes
Hello
I created 60 new tables based on 60 existing tables.
The 60 current tables are named FY11_ACC1, FY11_ACC2, FY11_SALES1, FY11_SALES2..., but all of the 60 tables start with FY11. I created the same structured tables but with names like FY12_ACC1, FY12_ACC2, FY12_SALES1, FY12_SALES2 FY12...
I used the below SQL and generated SQL code.
Select 'create table ' | Replace (table_name, 11, 12).
' in select * from '. table_name | "where 1 = 0'.
from user_tables;
But this did not generate the PRIMARY KEYS, FOREIGN KEYS and INDEXES. How can I automatically or with similar like SQL above? _
Thanks for your time and your help.
How can I create primary keys, foreign keys and indexes for allssk1974 wrote:
Can you please provide me with more information or examples.Something like:
SET SERVEROUTPUT ON FORMAT WORD DECLARE h NUMBER; th NUMBER; ddl CLOB; BEGIN h := DBMS_METADATA.OPEN('TABLE_EXPORT'); DBMS_METADATA.SET_FILTER(h,'SCHEMA','SCOTT'); DBMS_METADATA.SET_FILTER(h,'NAME','DEPT'); DBMS_METADATA.SET_FILTER(h,'EXCLUDE_PATH_EXPR','=''TABLE_DATA'''); DBMS_METADATA.SET_FILTER(h,'EXCLUDE_PATH_EXPR','=''STATISTICS'''); th := DBMS_METADATA.ADD_TRANSFORM(h,'DDL'); DBMS_METADATA.SET_TRANSFORM_PARAM(th,'PRETTY',false); DBMS_METADATA.SET_TRANSFORM_PARAM(th,'SQLTERMINATOR',true); LOOP ddl := DBMS_METADATA.FETCH_CLOB(h); EXIT WHEN DDL IS NULL; DBMS_OUTPUT.PUT_LINE (ddl); END LOOP; DBMS_METADATA.CLOSE(h); END; / CREATE TABLE "SCOTT"."DEPT" ("DEPTNO" NUMBER(2,0), "DNAME" VARCHAR2(14), "LOC" VARCHAR2(13), CONSTRAINT "PK_DEPT" PRIMARY KEY ("DEPTNO") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "USERS" ENABLE) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "USERS" ; CREATE UNIQUE INDEX "SCOTT"."PK_DEPT" ON "SCOTT"."DEPT" ("DEPTNO") PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "USERS" ; ALTER TABLE "SCOTT"."DEPT" ADD CONSTRAINT "PK_DEPT" PRIMARY KEY ("DEPTNO") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "USERS" ENABLE; PL/SQL procedure successfully completed. SQL>
SY.
Published by: Solomon Yakobson January 5, 2012 16:22
-
Why import data if ready schema and index create, increase in Undo TableSpace
I have a problem importing data.
When I export data don't have schema import include the index schema.
And then I import the schema ready.
When I import data, I find this Undo TableSpace increase very fast.
I have therefore two tests.
1. IMPORT of data and index, every thing ok look
2 import a schema includes index
and then import data. Undo Tablespace very rapid increaseIf you mean undo tablespace increase in order to read consisten read.
N ° cancel space use increases due to the DML. (requests for consistent readings read undo, they generate no cancellation to grow)
so you're saying that redo log appear, rollback undo segment will increase.
N ° increase in written cancellations results increase in roll forward.
IF we import large data, we must export data with the index and import data right now
If you import large data, you must create the indexes after the data is imported. If the index definitions are included in the export, the default behavior is that import will create them once the data is imported. To do this, undo lower for indexes.
Note This will generate redo for the creation (but does not cancel and therefore not generate recovery for cancellation). You can avoid this by manually running CREATE INDEX... NOLOGGING - but it means you need to get and modify the scripts CREATE INDEX.Hemant K Collette
-
DEALLOCATE UNUSED and SHRINK SPACE
Hello
What is the difference between the effect of DEALLOCATE UNUSED and SHRINK the SPACE?ALTER TABLE mytable DEALLOCATE UNUSED; ALTER TABLE mytable SHRINK SPACE;
ahmedbaraka wrote:
Hello
What is the difference between the effect of DEALLOCATE UNUSED and SHRINK the SPACE?ALTER TABLE mytable DEALLOCATE UNUSED; ALTER TABLE mytable SHRINK SPACE;
The SQL reference for 10.2 manual...
deallocate_unused_clause
Use the deallocate_unused_clause to explicitly release the unused space at the end of the table, partition or subpartition, segment overflow data, segment of LOB data and LOB index and make space available for other segments in the tablespace.
shrink_clause
The retraction clause allows manually shrink the space in a table, table arranged according to index or its overflow segment, index, partition, subpartition, LOB segment, materialized view, or newspaper materialized view. This clause is valid only for the segments in the tablespaces with automatic segment management. By default, Oracle database compact segment, adjusts the HWM and frees the space recovered immediately.
Compaction of the segment requires the movement of the line. Therefore, you must enable the movement of line for the object you want to cut before you specify this clause. In addition, if your application contains the rowid-based triggers, you must disable them before issuing this clause.
Or condense the above:
DEALLOCATE - simply releases unused space at the end of the segment; don't move not any data
Shrink - shrink space in a segment - requires line movement.
-
Shrinking Bootcamp partition and add space for Macintosh HD
Guys, after helping me with my previous question, my Macbook is almost as I want it to be. As said, I have a Macbook Pro 15 "retina end 2013 with OS X El Captain (later) and in addition, a Bootcamp with Windows partition 8.1." It's that everything works fine now, but the partition Windows 8.1 has 300 GB and my score only 80 GB hard drive Macintosh.
I wanted to shrink the partition, Bootcamp in Windows 8, 1 with Minitool Partition software but, obviously, when I reduce this score I get unallocated space that I can't turn into a new partition because I have 4 partitions in the MBR slot. So, what is the best way to reduce my Bootcamp partition and add space on the Macintosh HD partition?
Thank you very much!
Remove the Boot Camp partition, and Windows using Boot Camp Assistant. Then start to affect the size of the Boot Camp partition you want.
-
Sometimes, I get this when I get emails. If I send an email and then go to the folder "sent" to see what I sent, there is a capital A with a carat on top after each sentence (but it seems that when I finished the sentence with a period and 2 spaces.)
I tried to change the fonts, but that doesn't seem to help. I had this problem with an older version of Thunderbird and hope go away when I upgraded my OS (Linux Mint - opportunity to Ubuntu 10.4). I suspect that what is originally it was made more when I transferred my files to the new Thunderbird.
Thank you.
Looks like the incorrect character encoding is used.
What character encoding you have set here:
Edit > Preferences > display > formatting tab
Click on the button "Advanced".See my example below image
You can edit an image showing what you have selected, is much easier to type this.
What is only a problem with mail in the "sent" folder or also with mail in other folders?
Select the e-mail in the "sent" folder
Click on "other actions" > view source
or view > message source
or
CTRL + UWhat is in the source code for these lines:
example:
Content-Type: text/html; charset = windows-1252
Content-Transfer-Encoding: 8 bitYou can try to select email then:
View > character encoding
What is selected?
Try another encoding, note that this will be only temporary while e-mail.additional help:
http://KB.mozillazine.org/Font_settings_in_Thunderbird
https://support.Mozilla.org/en-us/questions/989709
https://support.Mozilla.org/en-us/questions/993631 -
My space Icloud is used because of the backup of the Ipad and I use three devices under ID so my iphone always gives the warning of small footprint. How can I save the back upward on my PC so that I can delete of I have cloud and free space
Hello
You want to know is explained here: https://www.apple.com/support/iphone/backup/
If you want to delete the backups that are currently clogging up your iCloud-storage space, use this: iCloud: delete a backup device iOS to iCloud
-
Pavilion p7-1414: HARD drive replaced and now...
The hard drive failed on my desk. I replaced and ordered the site of HP recovery media. When I try to make the recovery all I get is a message that "the system recovery media does not support this computer. You are not able to restore the system with the media. What in the world do I do now?
I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
Thank you for visiting the Forum from HP Support. -
Hello
My HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.
I always thought that this laptop can't run then 1 hour unplugged but still ran about 30-45 minutes before the battery is discharged (recommended HP). A few days ago I received this message when starting upwards:
Main battery
Failure ID-U360G0-000624-XD0002J-C0DL03
Product ID-WQ685UA #ABA
Replace the main battery.
So here I am. How do I get a new battery, sent me? Thank you!
Hello:
It is a forum of consumer to consumer.
Nobody here help you with warranty issues.
You will have to contact HP support support.
Contact HP on the link below for the country you live. Select the option 'technical support after purchase.
http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html
Paul
-
Impossible to replace and update a file in the client computers through Group Policy preferences
Hello
I am unable to replace and update a file in the client computers through Group Policy preferences.
For example,.
I am trying to replace and update a custom calendar file (c:\Program Files\Microsoft Office\Office12\1033\outlook.hol)to client computers through Group Policy ptreferences (political group: computer configuration\group policy setting \file preference\windows).) But it is not updated and replaced in client computers.
Could you please help me on this?
THnaks
Srinivasan
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
http://social.technet.Microsoft.com/forums/en/winserverGP/threads
-
Non system disk or disk error, replace and strike any key when ready
I bought a new laptop yesterday. I tried to install Windows XP Professional. When I put CD performance system, the error message "not-system disk or disk or error, replace and strike any key when ready."
Please solve the problem.
Kind regards
Bilal THello
If this is a new laptop, chances are that there is no available for this purpose XP driver to make it work correctly with XP.
Web site of the manufacturer of the laptop computer to check for the XP drivers for your laptop model.
If no driver is available, you're wasting your time trying to install XP.
If the XP drivers are available, here's how to install XP Professional;
http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm
See you soon.
Maybe you are looking for
-
I searched several locations but cannot find any info on the collection of bookmarks. I know that I can pin them, but I would like to know if there is a way to organize the long list. Please notify.Thank you
-
Atheros AR9285 wifi driver windows 10
Upgrade to windows 10 atfer audit compactabilite, no obvious problem. Everything works fine when around a week ago wiFi adapter no longer works, check the updates etc are done everything to nothing. Restored sysem at the earliest and WiFi worked very
-
How to restore the bar Tools/menu bar that runs along the top of the web page, one that has your bookmarks on it as well as others if necessary, I have it unchecked by mistake and can not get it back, help! User Agent Mozilla/4.0 (compatible; MSIE 8.
-
Installation of Windows Server 2003 on computers I7
I would like to know if it is possible to install Windows 2003 Server on unit pre-assembled PC with a core I7 processor. The situation is that we have an old unit of PC which runs under Windows 2003 Server.Our company would like to upgrade the unit f
-
I had taken of me then I could actually "buy more rewards
Original title: everyone does never win? I have had more rewards taken from me, so that I could actually "buy". I'm going back to Google