Build-Fehler. Fehler 1 (im accordingly mit einkommendem path?)

Similar Questions

• Ripple can not build app Playbook: the system cannot find the path specified.

  Not a huge surprise here, but I tried to compile my app for Playbook in undulation. After following all the steps of downloading all the SDKs, get and save new keys, have all the files in place, etc.. Ripple can simply with:

  Oh Snap! Build request failed with message: The system cannot find the path specified.
  

  Without rhyme or reason. No way to detect what it is. Ripple is dangerously wrong sometimes. And the "Oh Snap!" part is terribly boring.

  I was able to build the application via command line (which requires you to make a zip file of everything manually... * sigh *).

  Anyone know how it is possible to debug?

  Hi shnuffy,

  Assuming that the Tablet is the installation folder which includes bbwp and jre, you'll want your SDK path pointing there. Example:

  C:\BBWP\tablet

  For example, my Tablet SDK is installed in this folder that is used in my Path SDK:

  C:\Program Search SDK WebWorks Motion\BlackBerry to Tablet 2.2.0.5

  Note that I am assuming that your path refers to the folder that contains bbwp.exe, but you really want to make a folder of higher level.

  Other paths seems fine. Can you give than to try and confirm if you still have questions?

  Erik Oros

  BlackBerry Development Advisor

• Fehler 148: 3, Photoshop kann nicht mehr gestartet werden

  Fehlermeldung 148: 3, Photoshop (CS4 under Windows 7) kann nicht mehr gestartet werden. Weiss, wie man den Fehler behebt someone. MIT deen Anleitung von Adobe "licenseRecovery109.Zip = LicenseRecovery.exe hat es nicht works very.

  Error 148: 3 https://forums.adobe.com/thread/375447

• Can we build two installers (each installs different .exe) in the Labview project?

  Hello

  Since it has many common files between two test programs, I built two applications in a single project. Then I need to build two installers for applications accordingly. I'm having trouble to add the second request in the second installer when I specify the source files in the Installer properties. When I select this pack of applications according to the specifications of construction, I can't add it to the destination for the Installer folder. When I second request pack and destinatioin selected times record, the up arrow (to add files in the left pane to the right pane) turns into grey (not clickable). However, I found that, if I select the first pack of application according to the specifications of construction, the arrow turns direct. But I don't want to add to the first application for my second application installer.

  Everyone understands what I'm going to talk to? Looking forward to your help!

  Thank you very much!

  Spring

  Hi Sam,

  I went through all the pages and didn't see any product ID. What page do you see ELISA product ID?

  The problem I had was on the construction itself. I had not gone far enough to install it.

  After you remove the duplicate Installer and created a new one from scratch, everything worked as expected (from build for installation in the execution of the program).

  Kind regards

  Spring

• Add all files in the path when creating file folio in Folio Builder

  Hello everyone.

  I'm using InDesign CS 5 and the creation of folio for iPad 2. My Folio builder was working fine until last week, but all of a sudden I see a change in the way it behaves. When I update the files in the Folio Builder, it adds all the files in the path of access (not only the links in the file), including source of PSD files and other related files that I have never used in InDesign, do folio file will increase in size. Can someone help me please how do I remedy this situation?

  I thank you very much in advance.

  I look forward to your solution.

  You have an HTML file in there? If so, put it (as well as its assets) in its own folder.

  Bob

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• Predator G605 Internet geht nicht mehr

  While laufenden Betrieb auf once kein Zugriff mehr auf Internet über Wlan possible (Windows 8)
  Wurde tried
  RECHNER neu mit submarines/ausschalten Stecker ziehen (Fehler blieb)
  Länder, ob andere Geräte Zugriff auf Wlan haben (ok)

  Result Windows Netzwerkdiagnose
  Beim adapter Intel (R) Ethernet connection I217-v sind oder itself problem aufgetreten treiber
  Beim adapter Intel(r) technology TAP treiber driver (NDIS 6.30) sind...
  Beim adapter Realtek 8821 AE Wireles Lan 802.11ac PCI - E Nic sind treiber...

  IM Geratemanger wurde bei allen Adaptern displaying:
  DAS Gerät konnte nicht gestartet werden (Code 10)

  Couple of the Geratemangers versucht, Treiber zu aktualieren (message Treiber aktuell sind), bzw. Gerät aktivieren/deaktivieren (Fehler blieb)

  Auch mit testweisen eingesteckten LAN-Kabel keine Internetverbindung possible.

  Ist das schon ein Fall fur eine oder repair kann ich noch tun, um den Fehler zu beheben anderweitig had?

  Light ist, zwischen function und nicht mehr function, keine change an der Rechnerkonfiguration specification worden.

  Hallo Ratlos,

  DAS Problem you can Losen indem die Treiber mit dem Acer Recovery Management neu Installierst.

  Da gab're wohl am Samstag ein update was den Fehler caused, denn aus meinem Bekanntenkreis, haben auch some Schwierigkeiten.

  MFG

  Cyriix

• Directory of different report for each subsequence

  Hello

  My test sequence contains a number of subsequences, representing different tests, which can be run separately.

  When all the subsequences (tests) is selected to be executed by the operator (as "Run selected Tests" and not as a part of "USE Test") I have to save the test report to its specific subdirectory in the reports directory. To do this, I created a variable in StationGlobals, which contains the name of the sub directory and is changed in the configuration section for each subsequence (test), according to the name of the test.

  I am trying to use the following expression as a path to the report file in Report Options:

  "StationGlobals.ReportsDirectory+"\\SN_\\"+StationGlobals.TestSubDirectory+"\\SN_[] []."

  The problem is that the path of the report expression is read before execution of the selected step starts (and the StationGlobals.TestSubDirectory is changed), this is why the report is always saved in the subdirectory of the previously executed test. Any change in the StationGlobals.TestSubDirectory made by the subsequence running will be 'seen' in the next run of one of the subsequences.

  I tried also to change the reports using the ReportOptions Callabck directory, but the same problem stop there as well (is executed before the subsequence selected, changing the StationGlobals, TestSubDirectory to the value of specific test).

  How can I get the name of the subsequence selected for execution in order to build a custom report for this subsequence directory/path?

  Other means will be appreciated as well.

  Roman

  I solved the problem using my custom LabVIEW interface:

  When the report is displayed in the status display window, I send it to a printer. At this point, I read the value of the global variable Station (from TS), which contains the name of the directory in which the report should be saved (this variable has been already changed by the executed subsequence). Then I change the path to the PDF printer, depending on the value of the global of the Station, so that the report PDF file is placed in the correct directory.

• Assistance of Nexus 5 k with VPC and routing

  Hello guys,.

  We are trying to implement a new solution for one of our customers who have purchased a pair of devices 5596UP nexus.

  We have this topology attached in jpeg format. They want to use the pair of 5 k for LAN and WAN connectivity.

  Background

  Customer wants a VPC configuration between the pair of nexus 5 k beucase at some point they will want to buy modules FEX and VPC servers directly, in which case it will take the VPC (VPC VLAN L3 ends the 5 k using HSRP).

  Quesitons

  1. can I have the same vlan with SVI built on each link and go through the vlan the link peer in order to build IBGP and EBGP peers according to the diagram. Will this work?

  2. is it possible to build a bond of layer 3 of each link to remote device of PE and then configure other IVS on each link, allowing through the link peer? This configuration would work and traffic would pass through the link of peers for IBGP connectivity?

  3. where can I I directed by question 1 above and use a separate port channel (non - vpc) between the two Nexus 5 k trunk vlan everywhere?

  What is the best design around this kind of solution?

  The alternative is to have the layer switch 2 plug to two Nexus 5 k without port-channel and make tree covering to the loop. In this case I have to build another trunk between the 5 k or could simply allow to the vlan through the link Peer VPC.

  Thank you very much in advance.

  Hello

  The 5ks have cards daughter layer-3 installed? The 5K support BGP, but the maximum amount of BGP routes, you can have is 8000.

  HTH

• R-VMW-UC-FND5-K9 - over 32 Gb vRAM

  I have build a UCS spec CPU according to the design guide, and for this particular customer I specialization a server bigger than normal because of their needs.

  This part of code... R-VMW-UC-FND5-K9. Allows 2 CPU, which is fine, but only 32 GB of vRAM. I'm going with the 240 TRC #1 server, which has 96 GB. What VMWare support should I add or replace?

  To my knowledge, the only way you can do is pull the memory. I was told of IDPS to install vSphere Standard to solve the 48 GB of memory.

  Cisco:

  ===========================================

  What we recommend would be the vSphere Standard. You can choose from 1 year to 5 years of service.

  VMW-VS5-ST-1 =

  VMW-VS5-ST-2 =

  VMW-VS5-ST-3 =

  VMW-VS5-ST-4 =

  VMW-VS5-ST-5 =

  ===========================================

• Ghost against my SL500

  Hi all

  I just bought 30 SL500 laptops, 2746-6ofthe Type.

  My plan was to build one of them exactly according to the needs for our use, and then create a ghost image that I could empty on the remaining 29 of SL500.  Simple!

  So, I built SL500 Number One and created the Ghost image successfully.  I'm using GhostCast 8.2.0.1117.  What I did, quite simply, was to connect the SL500 to my T61 (running GhostCast) with a crossover cable.  I started the my USB SL500 and created the image.  Success.

  Don't worry, it's a million times...  Then I have connected SL500 Number Two to my T61 and attempted to reverse the process.  It went all the way through and success!  OR NOT...

  I then started the SL500 (after that restoring ghost image was complete) and I get the following:

  There was a failure of the signature

  There was a failure of the signature

  There was a failure of the signature

  There was a failure of the signature

  There was a failure of the signature

  It is endless...

  Now, I have never Ghosted SL500 before, but I've never had this problem in all my years of portable T3x Ghosting T4x and T6x series.  However, I admit that T60 and T61, I did in the past, I had to disable the 'Predesktop Area' under 'Security' in the BIOS but also set SATA to 'Compatibility' instead of 'AHCI '.  But the "Predesktop Area" option is not there in the SL500 BIOS!

  I left the SATA to AHCI setting trying my most recent ghost.  Should I change it and try again?

  Or is there something else to do?

  I hope that you guys can provide a solution because if I have to build 29 more portable from scratch, I could drop a lung yelling... ;-)

  Thank you!

  Chris

  Hi guys,.

  I read the posts you linked to and made a ton of investigation and trial & error on mine. I have three of these bricks * beep * things, but...  I found the solution!  Goes here!

  The SL500 is not "Predesktop Area" setting in the BIOS, because there is no fingerprint reader.  I dnd't know that before.  You don't need to change SATA to "Compatibility" as in previous laptops Lenovo/IBM model.  Let 'AHCI '.

  It is important to know that if you intend to Ghost these machines, you need to change anything.

  If you will be using GhostCast version 8.x (maybe others, I only use 8.2) to create a ghost of this laptop model image, you MUST capture the MBR.  You can do this by ensuring that the - IB switch is in the Autoexec.bat to yourbootable USB key.  In other words, your file should contain this line:

  GHOST. EXE -IB -Anyotherswitchesyouwant

  You must also make sure that when you go to restore the image to a client, IB switch is activated on key, too.  Of course, if you use the same flash player, it will be.

  To ensure your autoexec.bat file includes file IB switch enabled on Ghost.exe two-way and nothing change.

  That's all.

  Thank you from me in directions you've done, guys.

• Impossible to use Windows XP vmrun.exe to VMware VirtualCenter? -I get an unknown error

  Hello

  I have a question where I can't use vmrun.exe to control my virtual machines hosted on VMware VirtualCenter.

  First a few technical details of my system:

  My client is running Windows XP service Pack2, given MS powershell installed and the SDK Software VMware VIX.  I downloaded (with the default settings of IE 7) certificate of the host of the virtual machine and stored in my folder of C:\VMware-Certs named computer.cer. I also set the environment variable to include the path to the vmrun.exe file in the folder "C:\Program VMware VIX". Please note that all the components are the last versionssince, it has been downloaded and installed earlier this week.

  My host is running VMware VirtualCenter 2.5.0 build 119598 using the defaults (according to my owner of the network), which includes that it is running on port 443.I have checked using IE 7 to connect to the server and get the opportunity to see the Web page of the VMware Server. However, I think that the behavior of the Web page is a bit special. First he asked me for my personal certificate, that I don't have and I click OK. Can I get security warning of the server certificate, even if it has been downloaded, installed and the site is added to the "zone of confidence" in IE. And then ask my personal certificate, just click on the OK button. Then I get the javascript error: "line: 33 error:"ID_DownloadQuickStart' is undefined"and I click No to avoid debugging." Now, I get a page getting started with a list of chip two bullets and the text after the first point (the text is download VMware Infrastructure Client) and the second point is empty. (I get the links to the right, but also all copyright information in the footer).

  Previously, we used VMware workstation to host our virtual servers, but because the system is minibike we migrated to use VirtualCenterinstead. In this migration process, almost all the resources involved are new. When you use the old system with VMworkstation connections has been developed and tested by a colleague on another computer I use. Unfortunately, he left the company and his computer were recucled, so I can't test the orignial environment.

  Description of the problem:

  I open a command prompt to test my orders before calling them in my program compiled on my Windows XP computer. When I use the same structure of command as before, when we used VMware workstation, I'm changing the settings to point to the VirtualCenterand adds the specific server settings. I tried using commands such as runPorgamInGuest and hang, but the result, I'll be back is always "error: unknown error". For me, this error message does not provide information need to work with and I don't know if there is additional information saved anywhere else or if there is some debug log which can be activated.

  Since I am also VMware Infrastructure Client installed on the same PC I can check that there is not any question relating to the limitation of account. Two logs on my WinXP, the WMClient, the guest OS etc is using my personal journal. All computers involved are also located on the same domain. Since our account naming Convention is FirstName & lt; space & gt; LastName, I always add surrounding "to the newspaper information. The password itself contains letters, numbers and other characters, but all charaters are available on us-English keyboard and without spaces are used in the password.

  A classic test might look like this:

  C:\ & gt; "vmrun T - server h https://ip/SDK u" last domain\first "pwd Pei. suspending" [[SAN]] guestname/guestname.vmx.

  IP = the ip-adressof the VirtualCenter (I tried to use the name of the server, which I tried first, but some information that I found on the internet may indicate DNS issues so I went to use the ipadress)

  "last domain\first" = are the real account details used, framed by 'because it has a space in the name.

  pwd = the password for the account

  "guestname/guestname.vmx [[SAN]]" = it's the detailsretireved using the Infrastructure of the customer to get the name of the data store, this information is sent by "character. I also tried to add a supplement / on the front of the guestname so it looks like "[https://ip/SDK |]» http://communities.VMware.com/community-document-picker.jspa?communityID= & subject = SAN] [[SAN]] /guestname/guestname.vmx"since some information that I found on the internet are what I will post.

  OK, so what happens? Not much.. When I run the above command, I get the following response to my command prompt:

  Error: Unknown error

  And then even if my C: & gt; command prompt.

  It seems that everything I try to do I get this same error message. The only difference I get is when I cause the system to use server1 t instead of the Server - T parameter. Then, I get the following message instead:

  Error: The system returned an error. Communication with the virtual machine may be interrupted

  There is no details about this error that was returned. Yet once again, I'm stuck with a situation of Riddle.

  Please try tips here, I tried now so many options and not be able to move forward.

  Also make sure that you run ESX/ESXi 3.5u3 and your VM VMware Tools installed, these are the basic requirements for the use of VMware VIX vmrun

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• Code help required please

  Hi, I bought a template I use for my portfolio page and I am currently building the site and tweak accordingly.   The problem at the moment is adding the code to the bottom of each box that 'see design' bed next to the icon magnifying glass, in IE and Safari, all is well, however in Firefox text appear next to the design of the view, this text that appears must be in the box slideshow that is displayed? help would be appreciated please.

  www.lorraines.co.nz

  What happens if you add the below css at the end of your css style sheet linked?

  . plus-lien img {}

  display: none;

  }

• Custom WebServices in IOM

  Hello
  
  I deployed Axis2 webservice (Bottom-Up) using the tomcat server. The client I wrote contains 2 methods that are going to make mathematical operations.
  
  Now, I want to develop this webservice in IOM.
  
  Please add/modify the steps to integrate this webservice to IOM.
  
  1 export the client class and heels in a jar file and place this jar in folder tasks Java.
  
  2. create the adapter for the customer class and map it accordingly.
  
  3 path to specify jar supported files (for example, axis2.jar,...)
  
  4. If any...
  
  Thank you

  Strange.

  I did the same steps several times and it has always worked.

  Can you try just to build a small java client who wrote the newspaper and try to connect to IOM?

  There might be some problem with the versions of the dependent support libraries. log4j is a classic example.

  Best regards
  / Martin

• How to prevent the drop-down menu when you click in the URL field?

  Hello

  For some time there is Safari displays a short title in the URL field when you view a web page (for example, at the moment it says "Apple Inc").  Quite often I want to drage the actual URL in a note or on the desktop for later use.  Whenever I click in the URL field to do this, Safari down a bunch of icons corresponding to the bookmarks in the bookmarks bar, which is useless as my favorite bar is always visible.

  What I would do is to disable this action so that when I click on all I get is the URL so I can drag it somewhere.  Quite often when I drag the URL and domain of Favorites icons is visible, Safari think I want to lodge in this area and therefore mixes the existing icons around according to what path taking when you drag.  It's really very annoying behavior and there must be a way to disable.

  Thank you!

  -Tod

  

  Safari > Preferences > search

  Uncheck the "Show Favorites".