Impossible to use Windows XP vmrun.exe to VMware VirtualCenter? -I get an unknown error

Similar Questions

• I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  Hello raulganau, welcome.

  I suggest to try the system restore to restore the system to a date before the problem started. Try this...
  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."
  6 follow the instructions on the screen to restore the system to a date before the problem started
  Although the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.
  For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:
  http://support.Microsoft.com/kb/306084
  Let us know if it works,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Attempt to remove e-mail Messages in Windows 7 Live Mail. Used to work but now get "an unknown error has occurred."

  Attempt to remove e-mail Messages in Windows 7 Live Mail.  Used to work but now get "an unknown error has occurred."

  Administrative events Viewer.

  wlmail (5472) WindowsLiveMail0: page of data read from the file "C:\Users\MyName\AppData\Local\Microsoft\Windows Live Mail\Mail.MSMessageStore" at offset 269484032 (0 x 0000000010100000) (page 32895 (0x807F) the database) to 8192 bytes (0 x 00002000) failed verification because it contains no page data. The read operation will fail with Error - 1019 (0xfffffc05). If this condition persists then please restore it from a previous backup. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.

  Hello

  Because the problem is with Windows Live Mail, I suggest you to post your query on the Windows Live community forums to get help.
  http://www.windowslivehelp.com/product.aspx?ProductID=15

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I am using Windows 7 Home Premium version licensed but not getting is not option for BitLocker.

  I am using Windows 7 Home Premium version licensed but not getting is not option for BitLocker. Please tell me how to get BitLocker.

  Original title: BitLocker

  BitLocker is included in Windows 7 Ultimate or enterprise.

• When I insert a memory card in my PC not using windows 10 I suddenly for no apparent reason get a no found the message of photos. How to solve it?

  When I insert a memory card in my PC not using windows 10 I suddenly for no apparent reason get a no found the message of photos. How to solve it?

  Looks like you have a card reader malfunctioning.

  You can connect the camera to the computer via the USB cable provided with the camera to see if the pictures can be read like that?

• I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B,.

  I try to upgrade to Windows 10 and downloading still failing. I get the following error message: 802400B, which means that it can not read one of the files required to download (update manifest). The recommended windows fix did not work. What should I do? Thanks for any suggestions you may have.

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Impossible to use windows anytime upgrade to windows 7 Home Basic

  Hello
  I bought a retail version of Windows 7 Home Basic, but when I tried to upgrade using anytime upgrade I could not. This option was not available. When I tried to update using a disc of Windows 7 Home Premium, I got a message that I have to use Windows Anytime Upgrade.
  Thank you

  Hi voodoo2010,
  
  Temporarily disable any security software and that you try to upgrade, follow the steps mentioned below
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Allow all security software after you perform the troubleshooting steps.
   
  If you have a copy of Windows 7 Home Edition premium simply use the product as an anytime upgrade key. No disc required if you do it this way. You can use the button once for this upgrade as well.
   
  A similar issue has been discussed here. Disabling security software before performing whenever he helps me to upgrade.
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/c2870704-558d-41c9-9069-db6115c14788

  Now in the rare event that your Windows Anytime Upgrade does not go through smoothly, here's what troubleshooting steps you can try:

  1 restart the computer for all pending operations, as appropriate.
  2 see the following log files. journal entries can give you an idea why the WAU failed.
  -%userprofile%\AppData\Local\Microsoft\Windows\Windows at any time Upgrade\upgrade.log
  -%userprofile%\AppData\Local\Microsoft\Windows\Windows at any time Upgrade\upgrade_dism.log
  -%SystemRoot%\Logs\CBS\CBS.log file
  -%SystemRoot%\Logs\CBS\CBS.persist.log file

  I suggest you run chkdsk/r. It locates bad sectors and recovers readable information. / r includes the functionality of / f, with the additional analysis of physical disk errors.

  Windows 7 includes a tool called CHKDSK disk that is similar to the "scandisk" in older versions of Windows to audit tool. This application scans your hard drives for errors such as the lost areas, bad sectors, and corruption.

  You can run CHKDSK using two methods (the first being the easiest):

  Graphic Interface method:

  Open the computer option in the start menu, which allows to display all the available drives to scan on your PC:

  Then, right click on the drive you want to check for errors, and then select Properties :

  Now click on the menu Tools , then check now in the error checking section:

  You have several options within the check disk tool. It is always recommended to you leave the box "automatically fix file system errors" ticked, as this repair and problems encountered. If you want a deeper analysis, check "search for and attempt recovery of bad sectors". This second option takes more time, but you have to do if you suspect a disk problem. Once you are set up, click Start :
  If you try to check a disk that is currently in use, you will receive a message asking if you want to schedule a scan. Accepting this detection is the next time you reboot your PC:

  The command prompt method:

  Alternatively, you can use the command prompt to perform analysis on a drive letter of your choice by running "chkdsk x:" where x is the letter of your drive. Manual scan options are:

  • /F fixes errors on the disk.
  • /V FAT/FAT32: displays the full path and name of every file on the disk. On NTFS: Displays the eventual cleanup messages.
  • /R Locates bad sectors and recovers readable information (implies / f).
  • L:size NTFS only: changes the size of the log file for the number specified in kilobytes. If the size is not specified, displays the current size.
  • /X force the volume to unmount it first if necessary. All open handles to the volume would then be invalid (implies / f).
  • /I NTFS only: performs a less vigorous check of index entries.
  • /C NTFS only: skips checking of cycles within the folder structure.
  • /B NTFS only: Re-evaluates bad clusters on the volume (implies / r)

  "CHKDSK x: /F /R" could perform a full scan (including bad sectors) and an attempt to remedy.
  
  Warning of CHKDSK

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  All information about chkdsk, see: http://technet.microsoft.com/en-us/library/cc730714%28WS.10%29.aspx

  Aziz Nadeem - Microsoft Support

• Impossible to 'Use Windows logon authentication' in the client vSphere web 6

  Hello

  Since the upgrade to 6U1 5.5 vSphere, the "Use Windows logon authentication" box will not turn on. I installed the integration tools and tried both, the latest version of Chrome and IE 11. Someone managed to use this?

  Thank you.

  Hi Tim,.

  Please try the latest version of the ICU. The download is referenced in William Lam here blog:

  http://www.virtuallyghetto.com/2015/09/quick-tip-fix-for-CIP-no-longer-functioning-in-vSphere-Web-client-after-chrome-45-update.html

  Andreas

• C:Windows/system32/rundll32.exe - Application not found - OK__I get this error message when you try to open a program

  Error messages occur now - seem to appear now, after I did a Defrag.  If I try to open AOL, it brings me to a display list who wants to choose from a list of programs.  For AOL, I click on AOL.  I didn't used to have to select from a list of display.  Then I tried to open an Astrology program and it took me to the same list, which of course is not.  Now, I get the same error as follows: C:Windows/system32/rundll32.exe - Application not found - OK

  Here's a Plan:

  Goto, start system restore restore Menu\All Programs\Accessories\System Tools\System

  Now select the oldest Restore Point and restore your computer, but first make sure that you have an external drive.

  After that C:\Windows\System32\Rundll32.exe copy the external drive and the disc is ejected

  Open the system restore and undo restore

  After the undo operation is copy the Rundll32.exe in the road to C:\Windows\System32

  and the problem solved

  Note: the rundll32.exe should be missed recently and you should have an old Restore Point which contains a file Rundll32.exe Intact

• Continuous Windows\system32\wuauclt.exe pop up __16 bit subsystem MS-DOS error message: C:\Windows\system32\wuauclt.exe__The NTVDM CPU has encountered an invalid statement.

  have a couple of pop ups on my computer that appear every15 seconds or more. It is just an empty box with the title "Windows\system32\wuauclt.exe". Nothing in it. The other is a "16 bit MS-DOS subsystem" box with the following error message: "C:\Windows\system32\wuauclt.exe NTVDM CPU has met an invalid statement. CS:0000 IP:0077 OP:f0 37 05 02 0e choose 'Close' to end the application.

  When I choose 'close' or 'ignore' the windows go away but systematically re - appear about 15 seconds later. Now, I am just pass the windows out of the way and can use my computer like that.

  I ran scans on my computer but nothing was found.

  Since this problem started, my computer automated updates have not been installed. I understand that the above file has to do with automated updates. My Windows Update starts either in the Panel.

  I also had problems downloading the file exe running for installation on my computer since...

  Microsoft support directed me to this forum for help. Can anyone help?

  Hi Hibernatus,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what happens when you try to start Windows update? You receive an error message?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  The question Windows Update make sure that services associated with the update of Windows running on the computer.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Services window, double-click in the Background Intelligent Transfer Service.

  (d) under the tab general , under Startup type, click Manual, and then click apply.

  (e) click on the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the Services window, double-click the Windows Update service.

  (g) under the tab general , next to Startup type, make sure that Automatic is selected.

  (h) next to Service status, check to see if the drive is listed. If this is not the case, click pie S, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (i) in the Services window, double-click Cryptographic service.

  (j) under the tab general , next to Startup type, make sure that Automatic is selected.

  (k) next toservice status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (l) to close the Services window and try again to install updates to Windows.

  Also see the Microsoft article below if you use the Windows XP operating system.

  "16-bit MS-DOS subsystem" error message when you install a program

  http://support.Microsoft.com/kb/314452

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  http://support.Microsoft.com/kb/324767

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can what iCloud password I use to configure my e-mail client?  I get an authentication error.

  While trying to set up my email client (non-Apple) to receive and send an email to my iCloud account, I get an authentication error when using my AppleID password.

  I tried to reset my AppleID password, but the password is always a failure when you try to configure my e-mail client.  I even called Apple Support today where they told me that the iCloud email password should be in sync with the AppleID password since the iCloud email is simply an alias for it.  After 25 minutes, they told me that I must use just the Apple Mail client instead.

  I finally found the solution tonight when looking through the manage your site Apple ID.  You must create a password App specific to your e-mail client:

  1. go to https://appleid.apple.com/account/home
  2. Sign in with your ID AppleID and password
  3. Once the page is loaded, click on the link 'Edit' in the Security section
  4. You should now see a section for App specific passwords
  5. Click the "generate Password... »
  6. Enter a name (I used my name to email client - Unibox)
  7. Click on create

  Apple will generate a password you will use when you set up your email client.  Use this new password instead of your AppleID password.

  Passwords using specific app - Apple Support

• Updates Windows 7 Gets the unknown error code

  Windows updates will not download, I get an error of 3 important updates whenever I try to download them, "unknown error"?

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Impossible to use Windows Live OneCare

  Hey when I try to do careful liveone windows on my windows7 it asks me to install the scanner and I have but when am pressing scanner lunch, he will return to the page install the scanner and until now its been the same scan not lunchng what should I do to correct this problem oh ((revoir la façon dont j'ai essayé de désinstaller le winlive un soin de l'ajouter supprimer mais sa répond ne pas notant happing???))

  It would be better for you if you asked this question to Windows Live OneCare froum.
  Install and activate the section: http://social.microsoft.com/Forums/en-US/onecareinstallandactivate/threads for the benefit of other people looking for answers, please mark as answer suggestion if it solves your problem.

• I can't check the updates of windows. I get an unknown error code 80072efe. __

  I am running Vista Home Premium, 32-bit operating system, service pack 2.
  I am also running McAfee Antivirus Plus and my subscription is up to date.

  There is a good chance that you see the effects of a hijackware infection!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• get the 0xC004F015 error when you try to save a license of windows 7 using a kms server.

  C:\Windows\System32>cscript c:\Windows\System32\slmgr.vbs-ipk xxxxx-xxxxx-xxxxx
  -xxxxx-xxxxx
  Microsoft (R) Windows Script Host Version 5.8
  Copyright (C) Microsoft Corporation. All rights reserved.

  (Yes, I used an activation number real not xxxx)

  On a computer running Microsoft Windows non-core, run 'slui.exe 0x2a 0xC.
  004F015' to display the error text.
  Error: 0xC004F015

  When I run
  C:\Windows\System32>slui.exe 0x2a 0xC004F015

  I get a pop up that says that the license of the software service reported that the license is not installed.

  without any indication of which is the problem, I don't know how to deal with.

  Thank you

  Chuck

  Hey Chuck1234567890,

  Please check the following threads who speak the same error code with the installation of the KMS server. There are several suggestions that worked. See the one that helps you get the fixed number.

  Cannot install the KMS for Windows 7 Enterprise key

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/1530dea9-9E42-40E3-b381-7eac11079c23

   

  Problems of KMS server

  http://social.technet.Microsoft.com/forums/en-us/itprovistaactivation/thread/153a2021-01d9-4c5c-968e-68a0b6d84b20

  Not accepting KMS host does not VLK published the KMS key.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/thread/1bbcc441-9988-4283-AE9A-f58a5d100205

  Problem with the product key

  http://social.technet.Microsoft.com/forums/en-us/winservercore/thread/932bd843-7B94-4ADB-9751-2b15f7a238f7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.