Build / / need a syslog server

Similar Questions

• Syslog server Red Hat

  My station have dual boot, Red Hat 8.0 and Windows2K.

  How can I configure my Redhat 8.0 syslog server to receive my routers ACL logs?

  When I use a syslog with Windows2K server software Kiwi, my machine to receive the newspaper ok.

  Thks,

  Paulo

  I'm no expert, RedHat, but if it works the same as the Unix standard (that I tink, it does), you must change your file/etc/syslog.conf and direct specific syslog events in a specific file.

  Syslog events from a default router are sent using the local7 facility, so if you do something like:

  ADM local7.*

  (Note there is a TAB between the installation type and directory in this file) then your syslogs must be logged to this file. You need to stop/start the syslog server on the machine after making the change.

• Sending events in connection to Syslog server

  Hello world

  Need to know in the centre of defence we can send all records messages in syslog server just as we do for any cisco device.

  Is it possible that we can also send connection events and also Intrusion to the Syslog server?

  Is this possible?

  Also where in the centre of defence do us the syslog server configuration?

  Concerning

  Mahesh

  Mahesh,

  Please see the User Guide for the system FireSIGHT, Chapter 44. It includes a section on "Configure Syslog Responses".

  Here is a screenshot where you set up on the events of the Intrusion:

  fmc_syslog_setup.PNG

  

• Cisco ISE and external syslog server

  Hi Security Experts,

  We start with deployment cisco ISE (Identity Services Engine) in our network. We have allocated 250 GB of space for the node (Admin + monitor) ISE.

  I want to know if we can send tracking of nodes of external syslog server logs after a defined time interval.

  For example, newspapers that are more than 10 days are for external syslog server. So basically our node monitoring will have the marbles which are the Max 9 days. Is this possible? Could you tell me some doc that explains the configuration of the same thing?

  Thank you

  Boudou

  No this is not possible via syslog. What you need is database purge, so that the monitoring database is purged after a determined time interval. Here's a guide that will help shed some light on this:

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/user_guide/ise_mnt.html#wp1054328

  Tarik Admani
  * Please note the useful messages *.

• VSphere ESXi 5 - point syslogging to Kiwi SysLog Server 9.2

  We have several server ESXi 4.1 pointing to a Kiwi Syslog server v9.2.

  All point their 5 Kiwi Syslog server ESXi vSphere servers? Any help on this is appreciated.

  Can't seem to point ESXi correctly because the settings all look different.

  Thank you

  Changing the syslog settings don't automatically open Firewall ports.  You will need to go to the screen of the security profile to do so.

• upgrade to vCenter 4 to 4.1 or build new 4.1 server and migrate

  Hello.

  We plan to migrate our existing vsphere environment (vCenter 4.0 and ESX 4.0 update1/w) to vCenter 4.1 and ESXi 4.1.  We currently have 3 ESX 4.0 host and a physical vCenter 4.0 server.  The plan is to upgrade vCenter 4.1, build two hosts ESXi 4.1 on unused hardware, migrate virtual machines to new ESXi hosts and then rebuild the host ESX 3.  Have I not the steps in the right order?

  Our server vCenter 4.0 existing is running Windows 2008 Std x 64

  Another option I'm considering strongly is to simply create a new server vCenter 4.1 and not make a room upgrade, fix 3 ESX 4 server on the new server vCenter, decomission the old server vCenter 4.0, build 2 new ESXi servers, migrate all virtual machines to these two new servers and then rebuild the 3 servers ESX 4 to ESXi 4.1.

  In addition to historical performance data, what else would I lose if I build a new vCenter server vs. the upgrade.  Our virtual machine environment uses HA and nothing else (well, we have NetApp IVMS and VSC, which I'll have to upgrade to the latest versions either if we make a room upgrade or new construction).  The main objective is to have a server stable vCenter 4.1 for the long term and the ease of migration to 4.1.  Also, there are licensing issues during this transition, I might need to worry?

  The steps that you plan should all work. Don't forget to disable HA in modernizing and moving hosts! There are also not many that you lose with a new database. As you mentioned it is basically data historical parameters of cluster as HA...

  However I probably would do it differently. Unless you have a policy to run the server vCenter Server on a physical hardware, create the other as a virtual machine. Once install, add 3 existing hosts to the new vCenter Server. Then upgrade to existing level hosts one at a time to the fast vMotioning of the VM for two other existing hosts.

  André

• Help! I NEED A PROXY SERVER ADDRESS...

  RECENTLY, I'VE RESTORED MY LAPTOP. NOW MY INTERNET CONNECTION IS VERY SLOW. I NEED A PROXY SERVER ADDRESS. WHERE CAN I GET OR FIND A?

  It is not a matter of getting a proxy server address, it "s a question to configure a proxy server that is not a simple process and usually doesn't do much to increase the speed of the connection (although it improves it little to visit repeat sites).  During installation, an address is created or provided if you follow this path, but I really don't think it will solve the problem with the connection speed, even if it helps a little.  The proxy server must be installed on your own network.

  Here is some general information about Proxy Server: http://windows.microsoft.com/en-US/windows-vista/What-is-a-proxy-server. Note that it says it uses a computer other than the proxy server and that it is for commercial environments and not usually for home networks.

  I hope this helps.

  Good luck!

  Here is some information on wireless networks and wireless internet connections that can help with your problems of connection speed:

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Equalogic: grpparams syslog-server-list agreeing not to port

  I am trying to add a target server syslog with a custom port. It does not accept the port via the GUI or the CLI.

  I type grpparams syslog-server-list x.x.x.x:yyy

  It is said "% error: invalid IP address '.

  the GUI and CLI accept IP with no port.

  Is this a bug?

  Thank you

  James

  Hello

  Sounds like the bug in the documentation.

  It has been a feature requested for some time

  Don

• Write syslog to ASA 5505 VPN tunnel on syslog server?

  Hello

  Is it possible to let the ASA 5505 write syslog messages to a syslog server on the core network where the ASA 5550 is? (on the ipsec tunnel?)

  I tried this. The tunnel is up, but I get the message from routing could not locate the next hop for the NP (ASA 5505 ip) udp inside: (ip of the syslog server).

  THX,

  Marc

  MJonkers,

  I would suggest that you configure inside interface as the interface for management access. Include IP and IP address NAT syslog server interface inside 0 ACL and ACL crypto.

  You can order the "access management" when you want to run an ASA inside of interface through the VPN 7.2 below command reference:

  http://www.Cisco.com/en/us/customer/docs/security/ASA/asa72/command/reference/m_72.html#wp1780826

  I am running the VPN configuration on 8.2 and querying SNMP works.

  I hope this helps.

  Thank you

• How to send IPS events to a Remote Syslog server

  Can someone point me to a doc tech "how to send IPS (v7.x) events to a Remote Syslog server.

  Pls kindly marks the message as answered. Thank you.

• Enable syslog server behind the PIX

  Could someone tell me a config that allows a server syslog (Kiwi syslog) to get behind the PIX syslogs. I have a 2K with the KIWI syslog server behind a PIX 501.

  I have the static command, the access group and the access-list:

  public static 192.104.109.92 (Interior, exterior) 192.168.15.200 netmask 255.255.255.255 0 0

  Access-group local_server in external interface

  local_server list access permit udp any host 192.104.109.92 eq syslog

  Man, I can't understand it.

  Thanks for any help

  You could:

  1. make a capture of port syslog traffic directed to the syslog server.

  2 Terminal monitor - deny traffic showed clearly when I had not set up the firewall to forward the traffic. (Note: attention on busy firewall)

  3 netstat - a on the syslog server

  4. If you allow, you should be able to portscan the server on port of syslog by your firewall.

  5. is your syslog capture created file? It is not created if the service never started.

  6 - is the service running in the system context or perhaps another account that doesn't have the correct rights?

  The answers seem to indicate a service not started that seemed likely. What you describe happened to me when I had the demon also version; I went to service version and the problem has been resolved (once I opened the port.)

  I love the kiwi syslog. I use with Snare and BacklogIIS and receive alerts within 60 seconds to my mailbox when something bad happens. It always fools of my end users out when I call them with the problem solved when they seek always my number report the problem.

• Accounting ACS logs to Syslog server

  Dear Experts,

  We use the Cisco Secure ACS 4.2 in our Organization, where accounting Ganymede has been turned on AAA cleints. Currently, ACS connects with the accounting information accurate cli.

  Is it possible to repel these accounting logs to syslog server. For example, here's a scenario.

  User connected to the Cisco device at 10:00 and configured the device with 5 orders and logg unit at 10:05. These must be alerted/connected to the ACS syslog server.

  Kindly advice...

  Best regards

  Shiji

  Shiji,

  Yes you can.

  Go to system-> logging configuratoin and page you can configure which opens a session must be sent to the syslog server.

  

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• TMS & syslog server

  Hello

  I want that my TMS pointing to the syslog server server, how to proceed?

  I just checked the MSDS and even our TMS admin guides.  None of them mentions the possibility of using a syslog server, so it seems that this is not possible, unless there is another way to do that is not documented or within the TMS web interface.

  If it's something you'd like to really see included, suggest you to contact your Cisco account manager and file a feature request.

• Syslog server settings all all hosts in ESXi5

  Hello

  I can set my ESXi5 of the CLI of each server syslog server settings using these commands below:

  esxcli system syslog configuration defined - loghost = "udp://indexer.domain.com:514."

  esxcli system syslog reload

  How script is so that it makes the change on all ESXi hosts in my vCenter?

  Thank you

  Duncan.

  I'm doing this

  Add-pssnapin vmware.vimautomation.core
  SE connect-VIServer-Server "vcenterserver" - user "xxx" - password "xxx".
  $loghost = "xxxx".
  $esxhosts = get-VMHost
  {foreach ($esx to $esxhosts)
  $hview = get-View - ViewType "hostsystem" - filter @{"Name" = $esx. Name}

  #---HostImageConfigGetAcceptance-

  _this $ = get-view-Id $hview. ConfigManager.ImageConfigManager
  _this $. HostImageConfigGetAcceptance()

  #---EnableRuleset-

  _this $ = get-view-Id $hview. ConfigManager.FirewallSystem
  _this $. EnableRuleset ("syslog")

  #---ESXCLI enable syslog-
  $esxcli = get-EsxCli - vmhost $esx. Name
  $esxclisetsyslog = $esxcli.system.syslog.config.set ($null $null, $null, $null, $loghost, $null)
  $esxcli.system.syslog.reload)
  }
  Disconnect-VIServer-Server "vcenterserver" - confirm: $false

• transmit vcenter newspapers (not the vcenter) central syslog server

  Hello

  is there a way to transmit all headlines associated with an external syslog server vcenter? already, my whole army to esxi connect to this syslog server.

  Thank you uxmax

  The title of your son is in contradiction with what you are trying to accomplish. It is not a default path to transmit the vCenter real server logs to syslog server external without writing some logic/scripts to essentially scrap logs and passes them to the wide. If you use the new vCenter Linux Appliance (vSphere 5), you can do it too but not on a Windows system, at least out of the box which is supported. It can be that you had to buy a part 3 for Windows application see if it can extract the application logs.