Syslog server Red Hat

Similar Questions

• Can ESXI settle w Red Hat server as host operating system?

  I was wondering if w Server Red Hat settled ESXI as host operating system? If Yes, where is the download of VMWare on linux machine? Thank you very much

  fix!  ESXi is the host operating system and from there, you can create virtual machines from any flavor supported.

  http://www.VMware.com/PDF/vi3_35/esx_3i_i/r35u2/vi3_35_25_u2_3i_i_get_start.PDF

  If you have found this device or any other 'useful' or 'proper' job, please consider giving points.

• What Linux RHEL (Linux Red Hat Enterprise Server 6.7) compatible for oracle database 11.2.0.4 with grid Infrastructure?

  Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.

  Hi all

  We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.

  I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.

  can anyone share the ID document or information related to it.

  If OS RHEL 6 update 4 to 6-7 update patch

  (1) is it compatible

  (2) bugs or problems reported

  (3) in addition to the binary link again than the DBA to perform any other

  Thank you

  Hello

  6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4

  Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)

  -Jonathan Rolland

• I want to improve my server database Oracle 10 g 10.2.0.4, node 2 CARS on OS: release of Red Hat Enterprise Linux Server 5.3 (Tikanga)-version 2.6.18 kernel - 2.6.18 - 402.el5 to 128.el5.  This core does support my current 10.2.0.4

  I want to improve my server database Oracle 10 g 10.2.0.4, node 2 CARS on OS: release of Red Hat Enterprise Linux Server 5.3 (Tikanga)-version 2.6.18 kernel - 2.6.18 - 402.el5 to 128.el5.  This core does support my current Version of 10.2.0.4 or do I need to apply patches on the binary database after upgrading the kernel?

  Thank you

  Hameed

  Hello

  It should work without problem.

  According to the following document, you should have the kernel version 2.6.18 - 8 or higher.

  Oracle Database (RDBMS) under Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) (Doc ID 169706.1)

  Also check this document:

  How to check that you have an Oracle support for the kernel (Doc ID 225710.1)

  Kind regards

  Bashar

• VMWARE Server 2 and Red Hat 5.4 Interface Web ES crashes

  I have been using VMWare Server 2.0.1 fine several months until I've restarted my server in a new kernel.

  Although all modules start OK in the window of the terminal web interface seems to hang after have been up for a few seconds only - sometimes barely enough to open a session.

  Any ideas?

  My hardware is Dell R900 - 4 image intel CPU with 128 GB of ram

  My OS is Red Hat Linux ES version 2.6.18 kernel - 128.2.1.el5

  Thank you

  I came across the same issue last week. This is the background I and fix that made me backup for now.

  It seems that vmware provides their own libraries for some of what they need and that there may be a bad interaction between that and RHEL 5.4 libraries updated.

  The FIX:

  yum downgrade glibc glibc-common

  Delete it / come back about 22 packages/dependencies. Then I restarted and re - represented vmware-config and functions of each thing. Note You must change your configuration of yum update so that it is not pushing the new glibc glibc-common until this problem gets solved official.

• WHERE CAN I DOWNLOAD ORACLE 6I FORMS SERVER FOR RED HAT LINUX

  I HAVE A REQUIREMENT TO INSTALL OFSA 4.5 AND I NEED ORACLE 6I FORMS SERVER FOR RED HAT LINUX.
  
  
  CAN ANYONE HELP?
  
  THANKS IN ADVANCE
  
  Kind regards
  CESAR ALVAREZ

  Developer 6i is no longer available for download (at least not that I can find: it is not available in the usual places [e-Delivery, OTN, My Oracle Support]). The only way I can think of that you can get the version you need for Red Hat is to contact the Oracle Support and submit a special request to the software or if you know someone who has a copy of the software - ask them to make you a copy.

  @BelMan, your link to http://www.cedet.dk/ours/otndownloads.html is no longer valid.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Error: "FATAL: oracleasm Module not found" in Red Hat 6

  Hi all:

  ... OS: Red Hat 6.5 (64-bit)

  I am preparing to install a 12 c CARS in a Red Hat 6.5. When you configure the ASMLib, I got the following error when executing "/ usr/sbin/oracleasm init:

  2 May 18:23:20 oraprd01 modprobe: FATAL: Module not found oracleasm.

  I configure YUM Oracle filing and the package installed the "kmod-oracleasm. And in the link (Oracle ASMLib downloads for Red Hat Enterprise Linux Server 6) I got the packages 'oracleasmlib' and 'oracleasm-support', as you can see below:

  [root@oraprd01 binarios] # rpm - qa | grep oracleasm-i

  kmod-oracleasm - 2.0.8 - 4.el6_6.x86_64

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  My kernel is:

  2.6.32 - 431.el6.x86_64 oraprd01 Linux #1 SMP Sun Nov 10 22:19:54 IS 2013 x86_64 x86_64 x86_64 GNU/Linux

  My version of Red Hat is:

  [root@oraprd01 binarios] # cat/etc/redhat-release

  Release of Red Hat Enterprise Linux Server 6.5 (Santiago)

  Why am I the above error while trying the oracleasm module init? WHat am I hurt?

  
  

  Thanks in advance.

  Problem solved.

  I installed an earlier version of the kmod-oracleasm (kmod-oracleasm - 2.0.6.rh1 - 3.el6_5.x86_64) downloaded from the customer portal of Red Hat. Now the ASM is responsible.

• Is Red Hat Enterprise Linux 7 (x86_64) a supported OS for WebLogic 12.1.3 version?

  Hello

  Is Red Hat Enterprise Linux 7 (x86_64) a supported OS for WebLogic 12.1.3 version?

  Red Hat Enterprise Linux 7 only is not supported, when will it be (in which version of WebLogic)?

  And where can I find the documentation for the packages all the required for Red Hat Enterprise Linux required to install WebLogic 12.1.3?

  Check the attached XLS.

  Red Hat Enterprise Linux 7 (x86_64) is not supported for WebLogic 12.1.3 OS version

  For installation instructions, please visit WLS 12.1.3 Installation guide

  2 Installing the Oracle WebLogic Server and software consistency (12 c (12.1.3))

  Hope that clarifies!

  Thank you

  Vijaya

• Installation tools in Red Hat Enterprise Linux 6 64 - Bit vmware

  Hello

  I just want to install vmware tools in a VM for 64-bit Red Hat Enterprise Linux 6 a RPM.

  I don't want to install the kernel and CCG files, sort of compilation was released, unless I absolutely have to do.

  It is a small database server footprint. X - Window is not installed. Perl is installed.

  Here is the list of packages to choose from.

  http://packages.VMware.com/tools/ESX/5.1/rhel6/x86_64/index.html

  I read the Setup Guide for VMWare tools for OSSP documentation (specifically the table 2-7) and the package base looks like that's what I need, but I don't know which one to choose.

  Should which package I install?

  Thank you!

  Linux is not windows.  Libraries are necessary because these tools and programs were designed to use libraries that were not installed with the operating system.  The instructions are VERY specific, they give you a step by step to install, if the base packages are needed you can simply guess or assume are not necessary.

  FOLLOW the instructions, that is what they are there for, is not serious if YOU think they aren't necessary, they are required, if the instructions to install VMtools say that they are required.

• editing: filesystem ' / dev/root ' found on Red Hat Enterprise Linux 5.5

  I'm moving a VMware system using partimage backup. But when I try to boot Linux I get the following error messages:

  Start 'Red Hat Enterprise Linux Server (2.6.18 - 155.el5PAE).

  root (hd0, 0)

  Filesystem type is ext2fs, partition type 0 x 83

  root of kernel /boot/vmlinuz-2.6.18-155.el5PAE ro quiet rhgb = LABEL = / 1

  initrd /boot/initrd-2.6.18-155.el5PAE.img

  Memory for the allowable range of kernel notwithin (0 x 0 to 0 x 0) crash

  Red Hat nash version 5.1.19.6 starting

  editing: filesystem ' / dev/root ' is not found

  setuproot: moving/dev failed: no such file och direcotry

  setuproot: Error mounting/proc: no such file och direcotry

  setuproot: Error mounting/sys: no such file och direcotry

  switchroot: mount failed: no such file och direcotry

  Kernel panic - not syncing: attempted to kill init!

  Take your time to look for (iso).

  How mkinitrd here. The last time I have to chroot and mount everything manually due to the error log with my ext3 file system after p2ved. If you're lucky, Redhat rescue will be chroot for you and what you have to do is, run $mkinitrd.

  Good luck!

  http://www.no-x.org

• ORA-01017: OS authentication on Linux Red Hat 6.2 and Oracle 11 g 2

  Hello
  
  I try to rockers of authentication OS on Oracle installed 11.2.0.3 on a Red Hat Linux Server 6.2 and it just doesn't work. When I try to connect I always get the error ORA-01017: name of user and password invalid. connection refused
  
  I put the following Oracle parameters:
  REMOTE_OS_AUTHENT = TRUE
  os_authent_prefix = OPS$
  
  and I created a linux 'oracle' user and the Oracle user "OPS$ oracle."
  
  I know that the setting of remote_os_authent in 11g is depricated but I thought that it should still work, just an error messages takes place so I start the database, but it works as usual, only the authentication of the BONE doesn't seem to work.
  
  Does anyone know where would be the problem?
  Oracle said that remote_os_authent is depricated because it's risky, I know, but my database is in a secure environment without any internet connection. What other way is there without using remote_os_authent?
  
  Thank you very much for your help.
  Bernhard cordially

  Please check:
  http://www.Oracle-base.com/articles/Misc/OS-authentication.php

• P2V of Red Hat Linux 7.2

  Hello-

  I have a client with a Red Hat Linux 7.2 Server old. The free Converter Standalone will allow me to do this server of VMware Server (free version) P2V conversion?

  The physical server that will be converted is extremely low, lack of space, in the case of questions.

  Thank you...

  No, it won't work, for 2 reasons: RedHat 7.2 is not supported (it is an older distribution running on the 2.4.x kernel and we do not support that, except for RHEL 2.1).   Also, Linux P2Vs need to be oriented to ESX, VMware Server is not supported.  However, please keep in mind that ESXi is also free.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• How to configure the private network interface between two VMS os invited using red hat linux

  Hello:

  I'm trying to set up a Real Application Cluster on my home office so that I can install Oracle 11 g RAC which is a facility where you have two servers accessing the same shared of storage (chipboard).

  In addition they will have a network interface private and a public network interface, so it will be for public interface eth0 and eth1 for interconnection of private networks.

  I read that I can set up using VMWare server, create Virtual Machines and install the operating system invited to them.

  I intend to install Red Hat Linux guest OS.

  My question is basically, how can I do for the establishment of the private network eth1, will be the guest OS to automatically install the sense (do I need to have 2 NIC cards for this), or where and how can this be configured?

  Also, how these two speeches of Virtual Machines to another on the private interconnect?

  And is it possible to use DHCP or do I need to add the IP addresses manually?

  Very grateful for your contribution to this topic, thank you.

  Kind regards

  Sam

  You can have network private without assigning a NIC cards (adapt).

  Hope this helps

• Red Hat Enterprise Linux ES4 (U5) crashes on startup after P2V

  Hi all

  I have a Red Hat Enterprise Linux ES release 4 (Nahant Update 5) Server I try to virtualize. It runs a Tomcat application but also an Oracle database. I am using vCenter Converter Standalone and don't receive any error during the process, but to try to start the virtual machine newly created after the completed P2V happens to the following before apparently locking and no progress any more (while I can still use the keys ALT + function to switch terminals, none displays nothing except #1). :

  SELinux: End of initialization.
  SELinux: Implementation of existing Superblocks.
  SELinux: initialized (dev dm-0, type ext3), use xattr
  SELinux: initialized (dev tmpfs, type tmpfs), uses of transition SIDS
  SELinux: initialized (dev selinuxfs, type selinuxfs), use genfs_contexts
  SELinux: initialized (dev mqueue, mqueue type), not configured for labelling
  SELinux: initialized (dev hugetlbfs, type hugetlbfs), use genfs_contexts
  SELinux: initialized (dev devpts devpts type), uses of transition SIDS
  SELinux: initialized (dev eventpollfs, type eventpollfs), use genfs_contexts
  SELinux: initialized (dev pipefs, type pipefs), uses the SIDS task
  SELinux: initialized (dev tmpfs, type tmpfs), uses of transition SIDS
  SELinux: initialized (dev futexfs, type futexfs), use genfs_contexts
  SELinux: initialized (dev sockfs, type sockfs), uses the SIDS task
  SELinux: initialized (dev proc type proc), use genfs_contexts
  SELinux: initialized (bdev, type bdev dev), use genfs_contexts
  SELinux: initialized (dev rootfs, type rootfs), use genfs_contexts
  SELinux: initialized (dev sysfs sysfs type), use genfs_contexts
  SELinux: initialized (dev usbfs, type usbfs), use genfs_contexts

  Looking at the DMESG log on the server running, I see that a few lines of a successful boot of the system should relate to the controller floppy drive or at least the lack of it:

  Insert the floppy driver for 2.6.9 - 55.ELsmp
  Floppy drive (s): fd0 is 1.44 M
  floppy0: not found floppy disk controller

  and then the env initialisation:

  Broadcom NetXtreme II Gigabit Ethernet driver bnx2 v1.4.43 - HR (June 28, 2006)
  ACPI: PCI Interrupt 0000:03:00.0 [A] - & gt; GSI 18 (low) - & gt; IRQ 185
  divert: allocating divert_blk for eth0
  eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI - X 64-bit 133 MHz to mem f8000000, IRQ 185, node addr xe
  ACPI: PCI Interrupt 0000:05:00.0 [A] - & gt; GSI 19 (low level) - & gt; IRQ 193
  divert: allocating divert_blk for eth1
  eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI - X 64-bit 133 MHz at fa000000, IRQ 193, node addr xa mem

  However with any combination of cards and diskettes being enabled and disabled controller doesn't seem to be able to get the VM at startup after the "SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts ' line. The server is orginially a HP DL360 G5.

  How can I fix this far? I would avoid that changes to the physical machine to a minimum in order to preserve the State of it, but with the advantage of taking snapshots, I am less concerned to make changes to the virtual machine.

  See you soon

  Sam

  That is a difficult question to debug.  I suspect a problem with the SELinux based on what you wrote.  You may consider to disable SELinux on the source before the conversion.

  In addition, it is advised to disable active servers (Tomcat and especially Oracle) before starting the conversion, you could try to do this.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Installation of Thunderbird thunderbird - 24.4.0.tar.bz2 on Red Hat Linux

  I tried to install Thunderbird thunderbird - 24.4.0.tar.bz2 on Red Hat Linux Version. It's a direct download from the site Web of Thunderbird. The file thunderbird - 24.4.0.tar.bz2 seems to be missing the file be executed by Thunderbird.

  first step:
  chmod 777 thunderbird - 24.4.0.tar.bz2
  second step:
  tar - xjvf thunderbird - 24.4.0.tar.bz2
  extracted files:
  Thunderbird.
  Thunderbird/Platform.ini
  Thunderbird/searchplugins /.
  Thunderbird/searchplugins/amazondotcom. XML
  Thunderbird/searchplugins/AOL-Web-Search.Xml
  Thunderbird/searchplugins/yahoo. XML
  Thunderbird/searchplugins/Twitter.Xml
  thunderbird/searchplugins/eBay.xml
  Thunderbird/searchplugins/Bing.Xml
  Thunderbird/searchplugins/wikipedia. XML
  Thunderbird/components /.
  Thunderbird/composants/libmozgnome.so
  Thunderbird/Components/Components.manifest
  Thunderbird/composants/libdbusservice.so
  Thunderbird/defaults /.
  values by default/Thunderbird/pref /.
  Thunderbird/defaults/pref/Channel-prefs.js
  by default, Thunderbird/messenger /.
  thunderbird/defaults/messenger/mailViews.dat
  Thunderbird/updater
  Thunderbird/deleted-files
  Thunderbird /libmozsqlite3.so
  Thunderbird/OMNI.ja
  Thunderbird/dictionaries /.
  thunderbird/dictionaries/en-US.dic
  thunderbird/dictionaries/en-US.aff
  Thunderbird /libnss3.so
  Thunderbird /libssl3.so
  Thunderbird/icons /.
  Thunderbird/Icons/Updater.png
  Thunderbird /libprldap60.so
  Thunderbird /run - mozilla.sh
  Thunderbird/Throbber - small.gif
  Thunderbird/mozilla-xremote-client
  Thunderbird/libnssdbm3.chk
  Thunderbird /libldif60.so
  Thunderbird/plugin-container
  Thunderbird /libfreebl3.so
  Thunderbird /libnssutil3.so
  Thunderbird/chrome /.
  chrome/icons/Thunderbird /.
  Thunderbird/chrome/icons/default /.
  Thunderbird/chrome/Icons/default/default24.png
  Thunderbird/chrome/Icons/default/default22.png
  Thunderbird/chrome/Icons/default/default16.png
  Thunderbird/chrome/Icons/default/default48.png
  Thunderbird/chrome/Icons/default/default32.png
  Thunderbird/chrome/Icons/default/default256.png
  Thunderbird/chrome.manifest
  Thunderbird/thunderbird-bin
  Thunderbird /libldap60.so
  Thunderbird/libfreebl3.chk
  Thunderbird/dependentlibs. List
  Thunderbird Extensions.
  Thunderbird/extensions / {972ce4c6-7e08-4474-a285-3208198ce6fd}.
  Thunderbird/Extensions/{972ce4c6-7e08-4474-A285-3208198ce6fd}/preview.PNG
  Thunderbird/extensions / {972ce4c6-7e08-4474-A285-3208198ce6fd} / install. RDF
  Thunderbird/Extensions/{972ce4c6-7e08-4474-A285-3208198ce6fd}/icon.PNG
  Thunderbird /libnspr4.so
  Thunderbird/blocklist. XML
  Thunderbird /libnssckbi.so
  Thunderbird /libplds4.so
  Thunderbird/libsoftokn3.chk
  Thunderbird/application.ini
  Thunderbird/thunderbird
  Thunderbird/Updater.ini
  Thunderbird /libsoftokn3.so
  Update-Thunderbird/settings.ini
  Thunderbird /libxul.so
  Thunderbird/isp.
  ISP/Thunderbird/movemail. RDF
  thunderbird/isp/Bogofilter.sfd
  thunderbird/isp/SpamAssassin.sfd
  thunderbird/isp/DSPAM.sfd
  thunderbird/isp/POPFile.sfd
  thunderbird/isp/SpamPal.sfd
  Thunderbird/ISP/RSS. RDF
  Thunderbird /libmozalloc.so
  Thunderbird/crashreporter.ini
  Thunderbird /libplc4.so
  Thunderbird/precomplete
  Thunderbird /libsmime3.so
  Thunderbird /libnssdbm3.so
  Thunderbird/crashreporter

  Thunderbird CD

  don't. / file thunderbird will run

  It turns out that the download of the Mozilla - Thunderbird site is strictly for 32 bit. Someone was kind enough to give me the 64-bit x86_64 version. Thank you

  Solved