Build the application error

Similar Questions

• Problems with secondary after building the application .exe

  Hi people,

  as I like am a self taught Newbie on LV and TestStand I have some problems with the construction of an exe file.

  I don't know if it is a question of LabVIEW and TestStand, so I posted this question in the two Forums.

  I use the interface simple chart that came with Teststand and added a secondary. TestStand is supposed to open the called VIs dynamically in this secondary.

  I used the code from the tutorial respective http://zone.ni.com/devzone/cda/epd/p/id/6278

  Everything works fine until I build the application. The screws are then open in pop-up windows clean AND in high school, but only the popup version is usable.

  I hope that I am too dumb to find the answer and that there will be a quick solution.

  If you have built the exe in LabVIEW 2009 selected in the configuration of your adapter TestStand and LabVIEW 2009 and your screws have been opened and saved in 2009 LV?

  

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again

• I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  Note that iOS signature is only available on Mac. If you're on a Windows machine, you won't see the iOS tab.

  Neil

• Application Builder: the Application closes after the Launcher

  I'm launching my application executable that was built with the Application Builder. I use framework actor and have a Launcher.vi which is defined as the start VI and launched the actor parent. When I run the executable, I can see the front Launcher.vi opens and closes quickly, but the main façade never opens. Where should I start to debug my executable? Is there something obvious that I do not forget to do? I compared my configuration of the application to the actor framework example (that does not produce an executable work) and can not find something that is different.

  OK, I thought about it. I went back and watched closer launcher for the example of master actor and I noticed the block launch actor VI didn't have "Open front actor Core" value true which seemed strange because the front opens correctly for this application. I searched in VI properties for the parent of project example actor Core.vi and saw that the appearance of the window has a custom configuration. The options to see the façade when called and then close while initially closed have been verified in the sample project but unchecked for my project. I also watched the run settings and saw that the example is configured to reentrant run clone Shared while my project is configured to run not reentrant.

  Changing the appearance of window correctly launching my main façade. I played with the run settings to see what those and noticed that when my VI is configured to not reentrant run, child actors do not seem to get started. In addition, the stop on my front button will close the front panel, but the application is still running. Change the mode to Shared clone lance child actors correctly and completely closes the application when you press the stop button. I also tried clone reentrancy pre-allocated to see what would happen. errors of launcher just immediately say the call by reference VI is not executable.

  I guess it makes sense. Framework of the actor expects that the State is not maintained when a player is destroyed, so shared clone ensures that each instance of a child actor has its own pool of memory to be erased when the player is stopped. http://zone.NI.com/reference/en-XX/help/371361J-01/lvconcepts/reentrancy/

• LabVIEW crashing when you build the application (exe)

  Hello

  I am building an application from a simple labview vi (2011). The vi is that sets (boolean = TRUE) a line on the digital output card (NI 9472) when I start to run the vi. The program works very well after that I coded it. But when I try to compile an exe (application) of this project, then labview hangs in the build process. Is this a known issue? Help, please. I enclose my vi alongwith this email

  Thank you

  I'm sorry to hear that gascars.  I downloaded your project and VI and have successfully built an executable in LabVIEW 2011 and 2012 of LabVIEW.  Can you please send me a screenshot of the error you receive?  Also, can you make a simple VI that adds two numbers and see if that can be transformed into a .exe.

  Thank you

  Chris

• Build the NMAKE error for simulink model

  I spent by the procedure of how create the DLL of simulink models http://digital.ni.com/public.nsf/allkb/D70E74FDA37CD8E486257990000603A0 the and have not been able to successfully build the DLL for my model.

  I installed Visual Studio 2008 and I can see the Relatime Veristand workshop added to matlab. However, I get the below error.

  The system does not have the specified path.
  "NMAKE: fatal error U1077: 'copy': code 0 x ' 1 ' back
  Stop.
   
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>echo the mark command returned an error of 2
  The mark command returned an error of 2
   
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>An_error_occurred_during_the_call_to_make
  'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command
  operable program or batch file.
  # Time real workshop build procedure for model: 'CabinTemp_NI' aborted due to an error.

  Matlabe error window has the explanation, as shown below:

  It seems that the build process could not locate some utilities (e.g. do,
  compiler, linker, etc.). Please check your environment variables path and tool
  are correct. You should be able to run the make command:
  .\CabinTemp_NI.bat
  at an MS-DOS command prompt in the directory:
  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw
  Currently, this method generates the following error message:

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set MATLAB = c: \ Program Files (x 86) \MATLAB\R2010bSP1

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set MSVCDir = c: Program Files files (x 86) \microsoft visual studio 9.0\VC

  ' D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>"C:\Program files (x 86) \MATLAB\R2010bSP1\rtw\bin\win32\envcheck" INCLUDE "c:\program files (x 86) \microsoft visual studio 9.0\VC\include".

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>if errorlevel 1 goto vcvars32

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set VSINSTALLDIR = c: Program Files files (x 86) \microsoft visual studio 9.0

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set VCINSTALLDIR = c: Program Files files (x 86) \microsoft visual studio 9.0\VC

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>set FrameworkSDKDir = c: Program Files files (x 86) \microsoft visual studio 9.0\SDK\v3.5

  D:\users\f46123a\Desktop\Controls\Software\Models\Inputs\CabinTemp_NI_niVeriStand_rtw>call "C:\Program Files (x86)\MATLAB\R2010bSP1\toolbox\rtw\rtw\private\vcvars32_900.bat.
  Definition of conducive using Microsoft Visual Studio 2008
  (If you have another version of Visual Studio or Visual C++ installed and wish
  to use command line tools, run vcvars32.bat to this version.)

  I have the good set compiler but I'm not able to solve this error. I've also attached the text file that contains the log for the build process.

  Can someone help me with this please? where am I wrong or what am I doing wrong?

  Thank you

  Hi Jigar273,

  (1) have you configured MATLAB to use the compiler to MSVC ++ 2008? If not, then just type mex - configure in the MATLAB command window and follow the printed instructions.

  (2) open Windows command prompt and type % NIVERISTAND_ROOT, and then press ENTER. The call to this environment variable returns C:\VeriStand? If this is not the case, then please add this environment with the value of C:\VeriStand variable to your system and restart the PC. To do this, follow the instructions as described in the link: http://support.microsoft.com/kb/310519

• Professional Development System: Can not build the Application

  Hello

  I have the LabVIEW Professional Development System 2015 on my computer.   According to National Instruments, this version of LabVIEW has already provided with the Application Builder.  However, when I try to compile a standalone application, I don't have access to the application of the manufacturer. I've referenced the tutorial here and think that I do everything correctly: http://www.ni.com/tutorial/3303/en/#toc1

  If please see the attached screen shot and notice how I do not have the option ' new > application ", as claimed by the my system of professional development tutorial * must * have. How can I access the Application Builder with my professional development system?  Should I enable it?  If so, how should I do this?

  Thank you

  Jason

  Go to OR under the National Instruments License Manager in the Start Menu.

  Make sure it is turned on it.  It should have happened automatically.  But if you had some odd order of installation, or maybe don't have access to the internet when it installed first, that she might leave the hanging of activation.

• Nero Showtime "Cannot build the chart" error

  In general, Windows 7 RC works without problem on my Toshiba Satellite laptop. However, it returns an error "Can not build Graph" when I try to launch Nero Showtime 7. Another blog suggested that an uninstall of the user, restart the computer and install Nero 7 with administrator privileges. But this does not solve the problem. I met problems with Nero in the past (with XP Pro and Vista Business), which are usually resolved a few months after release. It would be nice to solve it before the release.

  Hi DoctorJoe,

  Thanks for posting on the Forum of answers.

  Can you post the exact error message in this forum?

  You could try to reinstall Nero with your anti-virus, firewall and temporarily disabled malware software.
  I see that there could be a Nero Cleanup tool you could try Nero.

  Please let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Start the application error: (0xc000001d)

  When I try to open Adobe Illustrator creative cloud I get an error message that is displayed, it says "the application could not start properly (0xc000001d)." I tried to uninstall and reinstall the program, it does not work. Also, other programs I have installed through CC start at all when the user clicks on the Open button. Help!

  Please see the links below:

  Re: Error 0xc000001d on start

  Application to open (0xc000001d)

  Let me know if it helps.

  Concerning

  Megha Rawat

• In the application error page.

  Hi all
  
  I went through the bt forum failed to find a solution which suites my needs.
  I want to change the error page templete, but when I go to change the properties of the application
  and check the error page templte, it is read-only, can't change my desired size.
  
  I want to just decorate my error page, it must be identical to the error page when I select the application with in theme: Scarlet.
  all suggsions.
  
  Thank you
  Little Foot

  Hello

  See "Modify default templates in a theme"
  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/themes.htm#BABGADIE

  There you can define East of page witch for the error page template

  Kind regards
  Jari

• Copy the Application error

  I don't know where to start and am sure that this solution is somewhere in the forum aleady but I had the minimal chance to research.
  
  I would like to take our Production application, copy it and place it in a different workspace. I read the info on the site of http://joelkallman.blogspot.com/2010/07/apexapplicationinstall.html on how to use the apex_application_install script, but I'm not sure 'where' to run it. Our workspaces all sit on the same server - but I run Toad? Or do I try to run it from the actual workspace where I want to create the new application? I don't know that I even sense.
  
  The other thing I tried to do was 'Request copy' for our production application, but I get the error: you must set the install at least one script to copy the definitions of supported objects
  
  I did a search to generate an installation script, but I wasn't able to find anyone.
  
  Thanks in advance for your help.
  
  Rob

  I don't know what version of apex you use, but in point 3.2 there is an export/import button in the application generator page (same page where you have the button run the Application).

  For Apex 4, you can find details on how to export an application in this case:

  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/deploy.htm#BABICGJJ

  Luis

• Try to build the application, the screw startup list is empty

  Hi all

  I am following the directions on this page:
  http://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/building_a_stand_alone_app/

  But somehow, when I get to Statup screw selection stage, the list is empty and cannot add the VI I intend to use it. Why is this happening? What step am I missing?

  Isaac,

  The first step in the help file you cite says «Open the LabVIEW project...» ».  You have your VI within a LabVIEW project?  If you want help with your Build, it would be useful to look at the project.  The best way to proceed is to implement the project (and all the screws, you wrote that belong to the project) within a Windows folder, compress the file (at one. Zip file) and fix it. Zip file.

  Bob Schor

• Lexmark X 1130 gives me this error at the launch of the application: Application LXBKaiox.exe error.

  1. Lexmark X 1130 gives me this error at the launch of the application: error LXBKaiox.exe - Application, the application could not start correctly (0xc000007b). Click OK to close the application.
  2. What can I do?

  It is perhaps because Lexmark have not released a driver for Windows 7 for this printer:-

  http://support.Lexmark.com/index?ProductCode=LEXMARK_X1130&page=product&locale=en&UserLocale=en_AU#1

  There is a work around: -.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/a8cf7720-3259-4baf-b9dc-12c2d3ba9b19

  The printer still works under Windows 7, or you have just tried to install it?

• Mfc100.dll of error missing at the launch of the application

  I installed a program in Windows 7 Professional.  executable file was built using visual studio 2010 in windows xp environment. After you install this Setup program in windows 7 then I try to run the application error message indicates "missing mfc100.dll with the launch of the application". Then I installed "Microsoft Visual C++ 2010 Redistributable Package vcredist_x86.exe" but no luck. This time not shown but error message by double-clicking the exe or run as administrator could not start the program. Also tried copying the dll files in the exe directory.
  Also tried regsvr32 mfc100.dll in the command prompt. This time, the error message is "mfc100.dll was loaded, but the DllRegisterServer entry point was not found"

  Hello

  The issue you described would be better served in the MSDN forums.

  These are two specific forums because I think that you have two different issues:

  http://social.msdn.Microsoft.com/forums/en-IE/category/VisualStudio

  http://social.msdn.Microsoft.com/forums/en-IE/category/vsdbg

  I hope this helps.