Built-in mic stop working after upgrading Vista to Windows 7

Similar Questions

• Logitech Headset H330 with Mic stopped working after upgrade to SP3 of XP Professional

  While in SP2, all worked, but once the system to update to SP3, the game has stopped working.

  Any help would be appreciated.

  I had the same problem after buying the Logitech H330 Mic headset and use Windows XP with SP3.

  -Solution (at least for me):

  * Go to C:\WINDOWS\inf

  To find the WDMA_USB file. BAK

  * Rename this file WDMA_USB.inf

  * Use the Windows Update Wizard (from Device Manager', select the 'Logitech USB Headset"(with yellow exclamation mark), right click and select 'Update driver...) »)

  * Specify C:\WINDOWS\inf as a location to search for the driver

  * If you are lucky (I was / am!), Windows XP with SP3 will install the "Logitech USB Headset" as USB-audiodevice and you can select (and - finally - use) as audiodevice!

  -Credits and thanks to 'Anonymous' on http://www.mycreativefansite.com/2007/06/solution-cannot-install-this-hardware.html on May 31, 2010 17:36

• Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

  I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

  I can not find a model of dv9249 specifically on the hp site. I found the dv9200
  series. you have a link to your specific model?
   
  in all cases, try to remove the Device Manager devices and if requested if you want
  to remove drivers, select Yes. then make a stop at cold and then turn it on.
  Finally, see
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Ene-CIR-receiver-conflict-in-Windows-7/TD-p/161289
   
  link of a person found an alternative driver that solves the problem) on the page
  (See above).
   
  It seems that several HP models affected related issues.
   
  If this does not resolve the problem, suggest that also posting in the forums of HP.
   
   
   
  On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
   
  > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
  Interface
  > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• stopped working after upgrade

  Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.

  I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).

  New version looks ace, so please help.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Qosmio F30: Multimedia keys does not work after upgrade Vista

  I upgraded my laptop Toshiba Qosmio F30 Edition Vista Home premium that I have received from microsoft.
  After the upgrade, the multimedia keys works not (first row) and also some of the shortcuts that is done by combining the Ctrl + keys to function (such as control + F1 to turn off the screen).

  After upgrading to Vista, I've updated all my device drivers with the second software DVD received with the upgrade to Vista.
  Also once again I've updated these drivers with final Toshiba drivers for Vista dated 04/25/07 on the internet. How to restore the functions of these multimedia keys and other keyboard shortcuts that does not work.

  I ask you: where you have downloaded the drivers and software tools?
  As I upgraded my machine, I had the same problem, so a user has me look on the Toshiba site and there I found some useful drivers.

  Maybe it helps, but I can't promise you.

  http://209.167.114.38/support/download/ln_byModel.asp

  Welcome them

• SD card slot stop working after upgrade a1 - 830 kitkat

  Hello

  After update of the a1-830 (Spain), SD card stopped working. As I said in another thread, it may be a coincidence if, in addition, there is no other reason why (no water, no drops, no high temperatures...).

  Checked the sd card in other devices - works OK

  checked other maps sd in the 830 - nothing has worked

  reset to factory settings - nothing, no error messages...

  My question is, is there some newspapers, dump, something where I can search for messages in error, to find if the problem is actually related to the upgrade?

  Thanks in advance

  Yes, I tried but nothing happened... until apply the latest patch, then the SD card is recognized, assembled and disassembled every second and valid ramdomly saying that the card does not have a file system.

  I'll try an another factory reset and if after that always have the same problem, will finally I bought at the store.

  I'm going to mark it as resolved, I think that this has nothing to do with the update of kitkat

  Thank you all for your answers

  Now, waiting for news about an update of the lollipop...

• Windows Explorer stops working after upgrade to sp2 for newly created folders

  Recently upgraded to Windows Vista SP2. Any new cause of file created Windows Explorer to display error message "Windows Explorer has stopped working" dialog when you try to look at the files in a directory listing.

  Here is an article on the limits that can help you to file naming: http://vlaurie.com/computers2/Articles/filenames.htm.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lightroom 6 stopped working after upgrading windows 10

  Hello

  My LR6 will not launch after the Windows 10 major update last week.

  I get this Windows dialog, superimposed on the LR start page;

  Adobe Photoshop Lightroom has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I have no option at this stage, except Lightroom closure.
  

  I rebooted several times (it seemed the same problem three times after the previous updates of small windows) and also reinstalled Lightroom twice, to no effect. When I start a reinstallation I am informed that there may be a problem because the installer has detected that a reboot may be waiting. If I stop and restart I get the same message again when you try the reinstall.

  Has anyone else had similar problems?

  Thank you

  Hi alanw,.

  Please see this thread CC Lightroom freezes when develop mode and manually disable the use of the GPU in Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• Phone stopped working after upgrading to iOS 9.2

  I have updated to iOS 9.2 and my phone (5 s) has stopped working.

  do not send text messages or save and none of the applications to work.

  I do not have a PC at the moment so I can't use iTunes

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Boot Camp has stopped working after upgrade to Yosemite

  Hi all

  I also lost Boot Camp after upgrade to Yosemite. I tried to recover by following the instructions on this forum but did not.

  Issues related to the:

  1. can I get it back? See some of the data below.

  2. otherwise, I can create a new training camp after the recovery of wasted space?

  3 is it better to first upgrade to El Capitan?

  Thank you in advance!

  ➜ ~ diskutil list

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 950,5 disk0s2

  3: disk0s3 Apple_Boot Recovery HD 784.2 MB

  4: Microsoft database 32.0 GB disk0s4

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS BrontoSSD * GB 950,1 disk1

  Logical volume on disk0s2

  90BC997C-0C7C-40FB-896D-973BC192A123

  Unencrypted

  ➜ ~ list cs diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 46320040-2E97-49D9-A652-87CBA72E637D

  =========================================================

  Name: BrontoSSD

  Status: online

  Dimensions: 950509715456 B (950,5 GB)

  Free space: 18956288 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 950509715456 B (950,5 GB)

  |

  + -> 14BD334A-53BE-4C89-949D-2E8E5EF30A59 family of Logical Volume

  ----------------------------------------------------------

  Encryption status: unlocked

  Encryption type: no

  The conversion status: NoConversion

  Direction of conversion: - none -.

  At encrypted extensions: No.

  Fully secure: No.

  Password required: No.

  |

  +--> Logical Volume 90BC997C-0C7C-40FB-896D-973BC192A123

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 950138437632 B (950,1 GB)

  Conversion progress: - none -.

  Reversible: Yes (no required decryption)

  Name: BrontoSSD

  Volume name: BrontoSSD

  Content indicator: Apple_HFS

  ➜ ~ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1856464288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  1856873928 1531680 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1858405608 32621336

  1891026944 62496768 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  ➜ ~ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-1856464288]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1856873928-1531680]

  * 4:87 1023 254 63 - 1023 254 63 [1891026944-62496768] VS NTFS

  You must run Testdisk. Have what you tried so far?

• C6150 does not print after upgrading Vista to Windows 7

  Hello.

  I have an AIO C6150, which worked fine under Vista.  Since I've upgraded to Windows 7, I can't get a printout of any application or the windows test print.  The test print HP Solution Center works very well.

  -Printer is connected wireless

  -J' installed the latest driver from HP which is supposed to be ready for Win 7

  -J' have also installed the patch they recommend after upgrade to Vista

  There is no error.  Print job appears briefly in the Print Manager window, then disappears as if it printed.  I am at a loss, any help would be appreciated.

  Paul

  I found my issue as well, with the help of HP technical support.  Basically, it is a conflict between the generic drivers Windows and whole new drivers from HP.  Once that happened, it was a nightmare to get all the 'remains' of these two uninstalled drivers.  Once we did it, we have been able to recharge the HP driver package and everything works fine.

• Pavillion g6: my laptop audio stop working after the installation of window 10

  After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

  Try to update the drivers via windows update or hp support assistant. Headphones work?

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Windows Media Center has stopped working (after the great October Windows Update).

  In October, there was a Windows update that broke my Media Center (and THXaudio.exe) I was able to restore and put off the various updates until I recently needed to shut down the computer for a clean material out.  Even though I had several valid restore points before the updates available, I was not able to use the system restore (says a file is missing) and also not able to restore all the features.

  First of all, I tried different patches of problem I already found online: I used the "sfc/scannow" and it always shows the files that need fixing (but he can't fix them). I tried the system restore (and broke). Deleting the database file does not apply. I even "turned off" WMC and not turned back on - no chance.

  Here is the text of the two errors:

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: ehshell.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bd053
  Fault Module name: KERNELBASE.dll
  Fault Module Version: 6.1.7600.16385
  Timestamp of Module error: 4a5bdfe0
  Exception code: e0434f4d
  Exception offset: 000000000000aa7d
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: thxaudio.exe
  Signature of the problem 02: 1.0.6.0
  Signature of the problem 03: 4a9f80d2
  Signature of the problem 04: Microsoft.VisualBasic
  Signature of the problem 05: 8.0.0.0
  Signature of the 06 problem: 4a277ad7
  Signature of the problem 07: 5 c
  Signature of the 08:0 problem
  Signature of the problem 09: System.BadImageFormatException
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  If necessary, I can post the cbs.log file results.

  UPDATE:

  I did an upgrade "on the spot" my DVD of Windows 7 and everything is back to normal.

  Now, I also have 63 'updated important"weed through, one at a time, to see who can be installed safely, and who eventually was my setup.