Phone stopped working after upgrading to iOS 9.2

Similar Questions

• Why siri stop working after upgrading to ios 9?

  Why siri doesn't work anymore?

  Updates can bring on all sorts of unforeseen anomalies. First of all, I recommend going through the instructions in this article that I placed down below.

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

  Help with Siri

  • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
  • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
  • When you use Siri to dictate, dictated is limited to 30 seconds.

  If Siri is not available, or do not understand or answer questions

  Before you try the following steps, make sure that your camera works with Siri. After each step, see if Siri works.

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. If you use an iOS device, try to use Siri with headphones. If Siri works if you are using a headset, get help with microphones on your device.
  6. Contact Apple support.

  If Siri does not make a noise when you press and hold the Home button

  On your iPad or iPod touch, Siri sounds when it's time to ask a question. If you have an iPhone with iOS 9 or later, Siri begins to vibrate in place. You will hear only the ringtone on your iPhone with iOS 9 or later, when you use headphones.

  Siri also sounds when you use "Hey Siri" on an iOS device 9.

  -- -- --

  If Siri doesn't always, use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support settings.

  Backup your iPhone If you have not already done so.

  The backup of your iPhone, iPad and iPod touch - Apple Support

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• stopped working after upgrade

  Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.

  I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).

  New version looks ace, so please help.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• iPhone 6 s power button / stop does not work after upgrade to iOS 10

  I just upgraded my iPhone 6 s 128 GB iOS 10.0.1 and my power/sleep button has stopped working. No matter how many times he pressed or held down, it does nothing. The screenshot feature is also broken. In addition, now the home for 3 seconds button initiates a reset. Otherwise, the phone seems to work fine.

  Hello

  Try a reboot press and hold the two buttons for 30 seconds

  Until you see the apple logo.

  See you soon

  Brian

• Email does not work after upgrade to IOS 10

  I had 2 mailboxes on my phone. After the upgrade to IOS 10 I could not use my email and started to get error messages "connection to the server failed. I deleted them both and add them again. It seems that the configuration is ok, but when I try to get into the mailbox again get the error messages.  Same question. There is no work around that I can use. I need my job. There is a known issue on IOS 10? Regards Fab.

  Fabpsantos wrote:

  I had 2 mailboxes on my phone. After the upgrade to IOS 10 I could not use my email and started to get error messages "connection to the server failed. I deleted them both and add them again. It seems that the configuration is ok, but when I try to get into the mailbox again get the error messages.  Same question. There is no work around that I can use. I need my job. There is a known issue on IOS 10? Regards Fab.

  No, it's not a known issue with ios 10.  I have two e-mail accounts and no connection problem.

  That message "connection to server failed" sounds like a problem with the server of your e-mail provider.

  Have you contacted them?

• SD card slot stop working after upgrade a1 - 830 kitkat

  Hello

  After update of the a1-830 (Spain), SD card stopped working. As I said in another thread, it may be a coincidence if, in addition, there is no other reason why (no water, no drops, no high temperatures...).

  Checked the sd card in other devices - works OK

  checked other maps sd in the 830 - nothing has worked

  reset to factory settings - nothing, no error messages...

  My question is, is there some newspapers, dump, something where I can search for messages in error, to find if the problem is actually related to the upgrade?

  Thanks in advance

  Yes, I tried but nothing happened... until apply the latest patch, then the SD card is recognized, assembled and disassembled every second and valid ramdomly saying that the card does not have a file system.

  I'll try an another factory reset and if after that always have the same problem, will finally I bought at the store.

  I'm going to mark it as resolved, I think that this has nothing to do with the update of kitkat

  Thank you all for your answers

  Now, waiting for news about an update of the lollipop...

• the iPad notifications do not work after upgrading to iOS 9.3.1

  iPad mini Notifications do not work since the update to iOS 9.3.

  I followed all these steps, but the problem persists:
  Text notifications not working after iOS 9.3

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  I don't get notifications for direct messages of Instagram on iOS 9.3

  Please, how can I solve this?

  Thank you!

  I changed the DNS 8.8.8.8 (settings > Wi - Fi) and notifications are now working.

• Logitech Headset H330 with Mic stopped working after upgrade to SP3 of XP Professional

  While in SP2, all worked, but once the system to update to SP3, the game has stopped working.

  Any help would be appreciated.

  I had the same problem after buying the Logitech H330 Mic headset and use Windows XP with SP3.

  -Solution (at least for me):

  * Go to C:\WINDOWS\inf

  To find the WDMA_USB file. BAK

  * Rename this file WDMA_USB.inf

  * Use the Windows Update Wizard (from Device Manager', select the 'Logitech USB Headset"(with yellow exclamation mark), right click and select 'Update driver...) »)

  * Specify C:\WINDOWS\inf as a location to search for the driver

  * If you are lucky (I was / am!), Windows XP with SP3 will install the "Logitech USB Headset" as USB-audiodevice and you can select (and - finally - use) as audiodevice!

  -Credits and thanks to 'Anonymous' on http://www.mycreativefansite.com/2007/06/solution-cannot-install-this-hardware.html on May 31, 2010 17:36

• Windows Explorer stops working after upgrade to sp2 for newly created folders

  Recently upgraded to Windows Vista SP2. Any new cause of file created Windows Explorer to display error message "Windows Explorer has stopped working" dialog when you try to look at the files in a directory listing.

  Here is an article on the limits that can help you to file naming: http://vlaurie.com/computers2/Articles/filenames.htm.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lightroom 6 stopped working after upgrading windows 10

  Hello

  My LR6 will not launch after the Windows 10 major update last week.

  I get this Windows dialog, superimposed on the LR start page;

  Adobe Photoshop Lightroom has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I have no option at this stage, except Lightroom closure.
  

  I rebooted several times (it seemed the same problem three times after the previous updates of small windows) and also reinstalled Lightroom twice, to no effect. When I start a reinstallation I am informed that there may be a problem because the installer has detected that a reboot may be waiting. If I stop and restart I get the same message again when you try the reinstall.

  Has anyone else had similar problems?

  Thank you

  Hi alanw,.

  Please see this thread CC Lightroom freezes when develop mode and manually disable the use of the GPU in Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• Boot Camp has stopped working after upgrade to Yosemite

  Hi all

  I also lost Boot Camp after upgrade to Yosemite. I tried to recover by following the instructions on this forum but did not.

  Issues related to the:

  1. can I get it back? See some of the data below.

  2. otherwise, I can create a new training camp after the recovery of wasted space?

  3 is it better to first upgrade to El Capitan?

  Thank you in advance!

  ➜ ~ diskutil list

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 950,5 disk0s2

  3: disk0s3 Apple_Boot Recovery HD 784.2 MB

  4: Microsoft database 32.0 GB disk0s4

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS BrontoSSD * GB 950,1 disk1

  Logical volume on disk0s2

  90BC997C-0C7C-40FB-896D-973BC192A123

  Unencrypted

  ➜ ~ list cs diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 46320040-2E97-49D9-A652-87CBA72E637D

  =========================================================

  Name: BrontoSSD

  Status: online

  Dimensions: 950509715456 B (950,5 GB)

  Free space: 18956288 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 950509715456 B (950,5 GB)

  |

  + -> 14BD334A-53BE-4C89-949D-2E8E5EF30A59 family of Logical Volume

  ----------------------------------------------------------

  Encryption status: unlocked

  Encryption type: no

  The conversion status: NoConversion

  Direction of conversion: - none -.

  At encrypted extensions: No.

  Fully secure: No.

  Password required: No.

  |

  +--> Logical Volume 90BC997C-0C7C-40FB-896D-973BC192A123

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 950138437632 B (950,1 GB)

  Conversion progress: - none -.

  Reversible: Yes (no required decryption)

  Name: BrontoSSD

  Volume name: BrontoSSD

  Content indicator: Apple_HFS

  ➜ ~ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1856464288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  1856873928 1531680 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1858405608 32621336

  1891026944 62496768 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  ➜ ~ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-1856464288]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1856873928-1531680]

  * 4:87 1023 254 63 - 1023 254 63 [1891026944-62496768] VS NTFS

  You must run Testdisk. Have what you tried so far?

• Audio input and output stop working after upgrade 10.2

  Phone 6 s 64Gb

  10.2 - updated iOS updated yesterday

  headphones - original Apple

  problem - when a call or receive a call cannot hear the other person, nor they can hear me.

  Bypass - Press speaker, microphone and speaker start to work, tap new pregnant and everything goes back to normal.

  happens all the time since updated!

  I had this problem too and a simple reboot fixed it for me.

• 3G does not work after upgrade to iOS 9.3

  I upgraded ipad model 2 A1396 again iOS version 9.3, the upgrade was a success and all the apps work fine except

  for the 3G cellular connection, that no longer works, it does not show 'No Service' next to the WiFi icon, before upgrade

  It shows the strength of the signal and the provider name, as of now, my internet connection is only WiFi. Any idea on this? Need

  help you guys, please!

  Tap Settings > general > reset > reset all settings

  Then restart your iPad and see if you have 3G.

  If this does not help, tap settings > general > reset > network settings

  Then restart you iPad once more.

• Subwoofer stops working after upgrade to windows 7. __

  After the upgrade to Windows 7 my subwoofer is no longer in effect. I tried to uninstall the driver and the re - install the latest drivers, but it does not work. Strange thing, it is that the sub will work in test phase of the program, but not in music playback. Any help would be appreciated.

  Finally figured it for people with Realtech HD audio drivers! All you do is, right-click on the volume in the taskbar.  Click playback devices. Click the speakers properties. Access improvements. Activate bass management. That's all! Alternatively click on correction of the room and set the PB to have more control.