Burn data disc in Windows 7

Similar Questions

• The difficulty to burn an Audio / or data disc using Windows Media Player on Windows Vista

  OK, so here's my question:

  I cannot burn an Audio / or disk of data using Windows Media Player. For some reason my Media Player is not finalize the discs that I do and he pops to 94% or 98%. I have a TEAC DVD +-RW DVW28SLC ATA Device. CD-ROM/DVD-ROM drives.
  Has anyone experience this problem with Windows Vista?
  Thanks in advance,
  Melissa
  Hi Melissa,
  Thank you for writing to Microsoft Communities. I understand that you are facing problems when burning a DVD in Windows Media Player.
  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.
  1. What is the format of the file you are trying to burn?
  2. do you have a third-party CD/DVD burning software installed on the computer?
  3 have there been recent changes to the computer before the show?
  4. are you able to burn through windows Explorer?
  Let's try the following steps:
  Method 1:
  You can take one or more of the following, and then try again:
  a. Verify that the CD burner is properly connected.
  b. clean the disc and verify that it is not damaged.
  c. try a different brand of blank discs.
  d. If another program is currently burning files on the CD, wait until the burning process is completed.
  e. Quit other programs that may be using the CD burner.
  f. restart Windows Media Player.
  g. restart your computer.
  Method 2:
  You can try the steps to solve problems in Windows Media Player
  Please return to the State of the question so that we can help you better.

• Can't burn data DVD on Windows Media Player

  So, the thing is, in the drop-down list on Windows Media Player, where it is supposed to be written 'CD or data DVD' in the 'Burn' section, there is only the option "data CD". Reading through the internet I can't find an answer on this error. First of all, I'm sure that my DVD drive can burn the DVD, I have a lot of DVD burned on other programs, but the Windos Media Player is the best option to save my music library prety and though I can use other programs that I wanted to use Windows Media Player.

  PS: I don't have that 1 driver CD/DVD in my PC.

  So, the thing is, in the drop-down list on Windows Media Player, where it is supposed to be written 'CD or data DVD' in the 'Burn' section, there is only the option "data CD". Reading through the internet I can't find an answer on this error. First of all, I'm sure that my DVD drive can burn the DVD, I have a lot of DVD burned on other programs, but the Windos Media Player is the best option to save my music library prety and though I can use other programs that I wanted to use Windows Media Player.

  PS: I don't have that 1 driver CD/DVD in my PC.

  =================================================
  Maybe you think of Vista... Windows Media Player 11 on
  Windows XP cannot burn DVDs.

  Windows Vista - burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Not able to burn blank discs in Windows Media Player 11

  Original title: NEED TO re - INSTALL WMP11 PROGRAMMER

  MY WINDOWS MEDIA PLAYER 11 IN WINDOWS XP VERSION 5.1 SP3 DOES NOT BURN THE SONGS ON A CD AUDIO VIRGIN. WHEN I CLICK "START BURN" AFTER A VIRGIN DISK IS IN THE DRAWER 'E', THE 'MEDIA INSERT BOX' THEN "DRAG TO DISC BOX" POSTER AND THE PROGRAM NEVER "AUTOMATICALLY STARTS TO BURN THE DISK OF VIRGIN.

  THE SOFTWARE HAS BEEN INSTALLED ORIGINALLY AS AN "OEM" IN MY DELL COMPUTER. I LEARNED THAT MY WMP11 IS PROBABLY DAMAGED AND MUST BE REPLACED.

  (1) DO I DELETE THE "WINDOWS MEDIA PLAYER 11" AND THE "WINDOWS MEDIA FORMAT 11 RUNTIME" PROGRAM BEFORE INSTALLING THE NEW WMP11 BY DOWNLOADING FROM THE MICROSOFT SITE?

  (2) I CAN DOWNLOAD THIS PROGRAM FROM MICROSOFT EVEN THOUGH MY ORIGINAL SOFTWARE WAS "OEM" INSTALLED BY DELL?

  (3) I AM 79 YEARS WITH BASIC COMPUTER KNOWLEDGE. CAN YOU GIVE ME A FEW POINTERS AS TO HOW TO DO THIS PROCESS "UNINSTALL AND REINSTALL?

  THANKS A LOT FOR YOUR HELP

  Hello

   
  1. were you able to burn disc using Windows Media Player 11 earlier?
  2 have you tried burning the disc manually?
  3. What is the exact error message you get?
  4. were there any changes (hardware or software) to the computer before the show?
  
  Download the Windows Media Player 11 from the link below and see if the problem persists.
  http://www.Microsoft.com/download/en/details.aspx?ID=8163
   
  Previously, reinstall WMP (Windows media Player), you try to burn manually.

  Change the settings for burning, then check.
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

   
  
  Note: Yes, you can install Windows Media Player 11 from Microsoft, even if it has been installed by Dell. No, you do not have to remove the previous Windows Media Player 11, that it will update after you download and install from the link mentioned above.
  
  Hope that helps.

• Not possible to burn a disc using Windows DVD Maker - stops at 6%

  burn a disc in creation of windows dvd... it is 6% and then says... a mistake unexspected portfolio.

  It retains this operation around the area of 6/8% and gives not only that details an error due... what should I do?

  It retains this operation around the area of 6/8% and gives not only that details an error due... what should I do?

  ========================================
  You may have a problem with incompatible source files.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Make a mistake 99% encoding when burning to disc using Windows DVD creation

  Original title: DVD burn problem

  When I tried to burn my movie using windows dvd, it was encoding and reaches 99% and said error occurred, could not burn disc, I used and the .avi format, what do I do?

  Disable all filters can be worth a try...

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down for...) What to do in case of problems)

  Also... the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Ulead, etc... but at least it is a start.

  Good luck.

• burn to disc in Windows Media Player

  Windows media player does not accept one of my discs to burn music

  Windows media player does not accept one of my discs to burn music

  ======================================
  Your burner working properly with other software?

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Windows 8 - can't burn the disc with Windows Media Player after you refresh the PC as well.

  Original title: cannot burn, was ok and then nothing, has had this problem for a week now, redrawn, changed registry, tried everything?

  Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi, Dorian,

  Thanks again for your response. Really, I apologize for the inconvenience caused to you.

  You can try these methods to solve the problem.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) press Windows key + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  If the problem persists, use method 2.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

  Thank you

• When I try to burn a disc using Windows DVD Maker, he gets to 69.9% then stops encoding. Why?

  I use Windows Vista and burned before DVDs successfully.

  Your project may include one or more corrupt or incompatible files.

  Your project can be also too big or too complex for your system resources.

• copy of a dvd/data disc using vista

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  ==================================
  Here's an easy way to create a copy of your DVD.

  The following freeware can create an ISO Image
  your DVD and then burn it to a blank dvd.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When I try to burn a video with windows media player, that it will not automatically to the window where add item option is available. Why?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You try to burn a video DVD? If_yes_that is not supported
  by Windows Media Player, try using Windows DVD Maker.

  The following items may be worth a visit:

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk". What's wrong? How to fix?

  When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk".    What's wrong? How to fix?

  I tried several times to remove the selection to burn and create a new a new but it keep "Windows Media Player has encountered a problem when burning the file to delivery" appears what should I do?   What problem is it?

  Hello

  1. what file format you are trying to burn?

  2. have you made changes on the computer recently?

  3. What is the security software installed on the computer?

  If it's something you downloaded, it may be copy protected by DRM, in which case you may not burn it to a CD or DVD.

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. try a different brand of blank discs.

  3. stop all other programs that are running.

  4. make sure that the hard drive does not use disk compression.

  I suggest that you follow these steps and check if they help to solve the problem.

  Method 1:

  Try to use the Troubleshoot utility to see if that solves the problem.

  a. open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel.

  (b) in the search box, type "convenience store" and then click Troubleshooting.

  c. click on show all and then click the Windows Media Player settings.

  Method 2:

  Select a recording speed (write) more slow for the CD burner.

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Method 3:

  If you have any third-party burning software, I suggest you temporarily Uninstall it and then try to burn the disc using Windows Media Player.

  Note: Reinstall the software after the trial.

  Method 4:

  Temporarily disable all programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  I hope this helps.

• Y at - it app Windows RT to burn a data disc?

  I need to copy data from a USB on CD, but there seems to be no support in Explorer windows RT this.  Is there an app for that?  I work for the army and we are not allowed to use USB keys and do not have access to the cloud.  The only way to transfer data from my Surface RT to my work computer is by burning data on a CD or a DVD, but I can't find an app that will allow me to burn a CD.

  Windows RT can not support optical drives and accessible devices in writing so there is not any App to manage this function.

• You can burn a disc to MP3 in Windows Media Player?

  Can u burn a disc to MP3 with windows media player 11?

  Hi JayTown,
   
  Yes, you can burn the CD using Media Player 11. Burn a data CD or data DVD.
   
  For more information, see "burn a data CD or data DVD" on this link:
  Burn a CD or DVD in Windows Media Player
  Note: The information in the article applies to the Media Player 11 for Windows XP as well.
   
  Additional reference on:
  Burn your own custom CDs 

• I used to be able to do with discs DVD-R data discs, now iv changed my hard drive and my computer only recognizes CD - R when I try to burn data?

  "Please insert the disk" error message when I try to burn data to DVD-R disc but works fine when burning data on CD - R.  Also, he can't read and data DVD - R disks, I made from the same computer in the past with the old hard drive, is my new hard drive, missing some sort of driver or something?  Windows XP computer bought from Dell about 4-5 years (Dell 5150).  He let me play commercial CD, burn CDs and burn data on CD - r.  He no longer do anything with a DVD-R disc, wont even recognize one, please help

  Hi malikchebli,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641