burner drive or software not found

Similar Questions

• I am suddenly unable to burn playlists to CD on my MacBook Air. Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  I am suddenly unable to burn playlists to CD on my MacBook Air. I burned a CD only 2 days ago.

  Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  Hi BVBigelow,

  I understand that you are not able to burn playlists in iTunes on your MacBook Air. Fortunately, we have an article (link below) which details a number of steps that can help to restore your ability to burn CDs of troubleshooting.

  12 iTunes for Mac: If you have trouble burning a disc

  Take care!

• NTBackup error: "the saved selection file 'Drive.bks' is not found."

  The server used to back up the C drive very well, then from the year last it started giving me this error. No updates or changes made to the system as far as I know - so I'm puzzled as to why I get this error (found via the errorlog of the applications of computer management)

  Details
  Windows Server 2003 R2 - Standard Edition
  Using backup utility

  Here's the line of 'code' of the backup utility
  C:\WINDOWS\system32\ntbackup.exe backup "@C:\Documents and Settings\Application Data\Microsoft\Windows NT\NTBackup\data\C Drive.bks administrator" / n "Sauveg.bkf created on 02/06/2009 at 14:34" /d "Set created on 02/06/2009 at 14:34" / v: no r:no /rs:yes / HC: off /m normal /j "Drive C" /l:s / f 'E:\C Drive\Backup.bkf '.

  I looked in the phone book and Drive.bks C is there, so I'm confused as to why its say Drive.bks is not found

  I also tried to change the name of the files, so there's a space (IE CDrive.bks etc), but there is no that tell me that CDrive.bks is not found
  Another thing, I have another job scheduled exactly the same thing, but for some personal files on a different drive, which is backup fine.

  any help or idea would be great

  Hello

  Your Windows 7 is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  Hi waynehile,

  1. are you able to boot into Windows after the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  Usually, this would happen if the hard drive is not set correctly in the basic input/output system (BIOS) or the settings in the basic input/output system (BIOS) are incorrect.

  Basic input/output system (BIOS) is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. Basic input/output system (BIOS) is part of the hardware of your computer and is separate from Windows.

  For more information about the correct settings in the BIOS of your computer and how to check and change these settings, see your computer documentation or contact the manufacturer of your computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• The message at startup: SATA drive secondary 0 not found.

  I have a computer Dell XPS Generation 2 with two SATA drives not configured in RAID.  Initializing the BIOS, I get the message: SATA drive secondary 0 not found.  Press F1 to continue or F2 to enter Setup.  If I enter the configuration, I find:

  Primary SATA drive

  Model ST3120026AS

  120 GB

  SATA secondary drive

  Unknown device

  If I press F1 it will load Windows XP.  How can I access my secondary SATA disk?  My BIOS is V A06.

  
  

• Error message: burner or software not found when burning CDs using iTunes.

  Original title: help please!

  I'm tring to burn a cd from itunes and it says not found burner or sofeware. What should I do about it?

  Hi Dawnso,

  1. what happens when you try to burn a CD using iTunes?

  2. you receive messages or error codes?

  You can see the article next to the Apple support and check if it helps.

  iTunes for Windows: additional troubleshooting questions burning tips

  Can't burn a CD in iTunes for Windows

  You can also chack if you are able to burn CDs with Windows Media Player.

  For more information, you can read the following article.

  Burn your own custom CDs

  If you still need help, you could get in contact with Apple support.

  Apple support

  Hope this information is useful.

• OfficeJet Pro scan 8610: 8610 computer software not found

  Hi - I have a fairly new Officejet Pro 8610 and it uses a wireless network with a MacBook Pro. Wireless printing function works perfectly; and, as a first step, the it function analysis did too. Without apparent reason, has now ceased to work, and every time I try to activate using the HP app, I get an error message indicating that the required software/driver is not found on the computer. However, I re-downloaded and installed the driver full value several times on the site of HP (no effect). The computer always communicate perfectly with the printer, and I'm able to activate the scan through the Mac system preferences function.

  Any help gratefully received...

  Hey @pleigh20,

  Welcome to the HP forums!

  I see that you have problems with your Officejet Pro 8610 scanning your Mac 10.9. I can help you with that.

  Given that you have a problem scanning I want to make sure that the printer is plugged directly into a wall outlet and not a surge protector. Once this is done, we will do everything that follows.

  1. On your Mac, go to Applications.
  2. Open your Hewlett-Packard folder.
  3. Run Uninstall HP if it is present.
  4. Go to Applications and utilities.
  5. Open disk utility.
  6. Click "Macintosh HD" on the left.
  7. Click on verify disk permissions. It will take about ten minutes.
  8. Click on repair disk permissions. It will take about ten minutes.
  9. Restart your Mac.
  10. Go to your Apple icon and the software updates. Download the updates that are found.
  11. Download and run the HP Installer (if you need the link you can click here).
  12. Try scanning.

  I would like to know if it works for you. If it's not please let me know what happened and I will be able to help you further. Even if it solves all please let know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a great weekend!

• HP6520: HP, software not found on my computer scan

  Hi - I downloaded the latest update of the software for this printer on my Mac.  When I restart both devices and connect my mac to my printer, I can't edit task analysis as the error message "software HP Scan, which is required to view and edit tasks scanning, not found on this computer. To download and install the latest software of HP scanning for your device, visit http://www.hp.com/support. »

  How can I get this software on the best of my knowledge, I downloaded the all-in-one software for this machine, which should include the scanning software.

  I am able to scan to the Mac using the touch screen of the printer but it records the individual pages as JPEG files and I want to be able to save several pages in the same file, just as I do in Windows.

  I appreciate your help in advance

  Hi @coffindodger and welcome to the Forums of HP!

  I understand that you are having problems using your scanning software. I would like to help with that!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend you to reinstall HP Photosmart 6520 e-all-in-one of the printer drivers.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• my computer says that my primary drive 1 not found, secondary drive 0 is not found. also allicating I/O bar for PCI device error.

  We had a power outage about 2 weeks ago, it burned my hard drive. My neighbor put a new disc in for me, now my computor is said primary drive 1 not found, O secondary drive not found, and 1 secondary drive not found. I do not know how to solve this problem, can you help me?

  Hi camicannon,

  Check out the wire link such question and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/XP-primary-hard-drive-disk-not-found/c98f8205-78d8-4e6a-A603-8c4fae852690

• Hard drive test failed, not found boot device

  I have a Pavilion dv7 1245dx with Windows Vista 64 bit bought 2009 at Best Buy.  He slid the arm of the couch on a carpet in stop down.  Next day started ok, entered into yahoo, facebook, then type of frozen.  Finally, don't do anything, turn off manually down, started upward. Black screen, "No. Bootable Device - Insert Boot disk and press any key". It will accept only the recovery disks that I made after the purchase. Starting test ok, ok, hard drive memory test failed 'Boot Drive not found'.  If it helps, caps lock is flashing.  I saw something in a forum on the reset or reinstall the hard drive but no explanantion how.  Can you help me?  And can you give me a ballpark figure on a new hard drive or better to buy a new laptop?  Laid off in Michigan, hoping to be able to get the unit up and running without having to consider.  Thank you very much for your help!

  Hello:

  Here is the link to the service manual for your laptop.

  Can be found in Chapter 4, procedures for removal and replacement of hard disk.

  http://h10032.www1.HP.com/CTG/manual/c01918142.PDF

  If removing and reinstalling the drive does not resolve the problem, then the hard drive is dead.

  I don't know what that means though the flashing light of caps.  This could be something more serious.

  A new hard drive will cost about $57.00.

  I hope the recovery discs, you did work on it as well. They should but no guarantee.

  http://www.Newegg.com/product/product.aspx?item=N82E16822148532

• "Hard drive - (3F0) BootDevice not found" after deleting Windows

  Hello.

  I have a ProBook s 4530 accompanying pre-installed Windows 7 Home Premium. I'm a Linux user for a long time, so the first step that I took after the purchase was reducing the OS partition and install Arch Linux on the free space created. I used the laptop in this configuration for something like a year now, but since I rarely even start on Windows, I decided to save free space by deleting them entirely. You use cfdisk, I deleted their partitions.

  After a short time (about a day), I got off the machine, and I found a few old labelless CD I wanted to inspect. I started the calculated and inserted in the drive. It was obvious that it was a Windows XP installation CD, so I turned off the computer (before it has completed the phase of loading drivers).

  (It is likely that the previous paragraph is unrelated to the error message, because the installation should not even touch the disk at this stage.) I also do not restart often, so I'm not sure that makes the computer startup between the removal of the partition and start the Windows XP CD.)

  The next time I tried to start the PC, I was greeted with "Hard Disk - BootDevice (3F0) not found." All HP diagnostics were OK, and when I loaded GRUB on a live Ubuntu CD to my hard drive, it starts normally.

  I admit the BIOS could be confused in some way by the partition table I, it starts with lots of free space and has no NTFS partitions, but I think that BIOS should not depend on the OS that I run. So, I have a few questions:

  1. The HP BIOS is trying to detect Windows, and it doesn't do anything differently if it does not find Windows hard disk? I googled around and did not find anyone with experience running as Linux on my laptop (just dual-boot).
  2. If so, is there some way I could convince them to begin the hard drive even through it is not Windows on it?

  Thank you.

  Then he turns the laptop was confused because no partition has been marked as active. My bad.

• Drive hard internal not found to fix this problem, try reinstalling the drive

  So I get the error message: internal hard drive not found to fix this problem try reinstalling the drive

  Once I got the error, I removed my 1 TB HARD drive and replaced by a 525 GB SSD and I still get the error. After testing the original 1 TD drive HARD, has nothing wrong with him, so it seems to be something wrong with the computer itself.

  I ran the PSA test and it does not detect any problems with the hard drive and no other errors.

  What could be?

  Edit: I have the Dell XPS 15 9530

  The fixed. The BIOS has been updated with virtualization, so we turned off and also removed the SSD of 32 GB.

• Installed the new hard drive - now "OS not found"

  Hi, I recently installed a new hard drive in my laptop because the old hard drive was dead. So, I installed the hard drive and I am now installing the operating system using the Dell disk I received with my laptop. This is for the 32-bit window Vista and it says it should be used for re-installation of Vista. It was in a sealed envelope - so it has never been used.

  When I start the laptop and insert the disc, it just says: operating system not found.  I made sure the cd drive is the first in the startup list.  I also put the drive into another laptop and copied the files on a USB key.  Then tried to install it on the USB. No luck.

  I have run the system diagnostics, and it says that my hard drive and cd drive are recognized and functioning.

  The dell cd drive is not bootable?  Thanks in advance for your help.

  I was able to fix this on my own. It turns out that one of the files has been altered I discovered once I was finally able to get it to boot from a USB device.  I found the one window Vista installation disk other that I have with another computer laptop and used that. Worked well.

• I am trying to burn a cd on iTunes and it says __Non supported drive found... burners _ so I click on burn, then says Disc Burner or software not found.

  I try to reinstall the program, but it simply doesn't.

  Help, please!

  Hello

  Having too many CD/DVD programs can cause problems, in particular those charged pieces of
  themselves at startup. Try to uninstall iTunes and more recently added (not those
  included with your computer) to see if that helps.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• disc burner or software not found message when you try to burn a cd on my macbook pro osx

  I'm used to be able to burn CDs. not so much anymore.  I don't give no disk this burner or software offered. even after the update to itunes.

  I'm used to be able to burn CDs. not so much anymore.

  That means even some Yes? If so, when?  If you mean any please tell.

  even after the update to itunes.

  When what you did to update iTunes? You have restarted the computer since that?