Burst

Similar Questions

• Export of all photos in burst of App Photos in the office

  I would like to export all the photos burst as individual photos from the Photos app without crosses and selecting each (don't even know if it works)

  The batch export? Thank you!

  
  Hold down the Option key, click and drag the thumbnail of the photo of the burst to the desktop or the folder on the desktop.  Which will create a file for each frame in the explosion.

  

  

• When I connect to a site, there is a very short burst of weird electronic noises. This Charleston began, but not with other browsers.

  Whenever I connect to a site, there is a very short time (1/4 second?) burst of weird electronic noises. It started recently, but I don't remember if it's after a specific update. I installed 30.0 version, but the problem started with the previous version. This does not happen with Explorer or Chrome. Running WIndows 7.

  Are there logs that I can access to understand where this noise?

  Thank you

  You have the NoScript extension?

  • http://noscript.NET/FAQ#qa1_6
    Sound: Options > appearance tab, uncheck the Audio feedback when scripts are blocked

• I have an i phone 6 (9.3.1) I can disable burst mode?

  I get the burst mode, even though I type quickly once the button in photo taking!  I don't want this feature on my phone!

  At the top of the camera screen press "hdr" and turn it off.

• No album "burst" in Photos

  I uploaded several photos from my iPhone 5s "burst", but there is no album 'burst' showing in the Photos of el capitan

  You need to get the update - many features have been added with El Captain (not positive of gusts, but probably)-in the App Store at El update Captain 10.11.3 and Photos 1,3 - and note that unless you have one or more gusts albums does not show in all cases

  LN

• Satellite L100-122 - burst HDD speed is low

  Hello

  I test my disc drive (Toshiba L100-122, HARD drive MK6034GSX) HARD with HD Tach and I see that the burst speed is approximately 35 - 40 MB/s. Each disc HARD anothers (but no Toshiba HDD) burst speed around 80 - 90 MB/s. Why Toshiba has this low burst speed and is this important parameter for efficiency? I asked a Polish Service Toshiba first but they are not able to answer me.

  Kind regards
  ZS

  This is not true. Not every HARD disk has a higher burst speed.
  The burst speed tests the efficacy of the cache memory subsystem and measures speed of drive interface, and the controller hard.
  The burst speed depends on different factors.
  As said, the hard drive, but also the control interface is important. HARD drive runs at 5400 RPM. There is a max value. It runs slowly if the cache is fully charged. Currently IDE Ultra DMA/66 drives can reach 66 MB/s but this is not a fixed value.
  I don't know how test you it, but perhaps some 3rd party applications accessed the HARD drive during the tests.

  PS: The L100 supports an interface serial ata 1. 0a.

• Selection & export all pictures in the burst.

  Is it possible to quickly export the entire burst by Photos desktop application?  It seems it should be a no-brainer to have an export all pictures in a burst option.  Now the only way I know is to select a start, click on a selection and then manually select each which can be extremely difficult with large bursts.  I'm missing the way or is there a?

  Try chooses the image and use the file export export Unmodified Original ➙ ➙ menu option.  Gives me each image separately burst.

  OR

  Option-make slide the thumbnail on the desktop.  That also produced each burst.

  

• Sony As100v how can I use the burst mode?

  as the gopro, you can take a picture like 10 frames / second

  Burst mode is now available on the new firmware... But do not install it again. People who have problems with their cam action during and after the upgrade of the firmware. Wait a little more clearly and correct installation of the update.

• Qosmio X 775 "burst" and "cracking" noise came out of the speakers

  Hello

  so my problems began a few days ago, when some "burst" and "cracking" are out of the speakers.
  It is not all the time, but as between 3-4 seconds I can hear it. I also connected to the laptop to a speaker system, and the problem remains, which means that it is not the speakers but the signal.

  I tried to reinstall the drivers, but it seems it isn't fixed yet.
  The Waves MaxxAudio 3 also disappeared when I reinstalled the drivers and now can't get it back?

  Someone at - it an idea of what could be causing this and how do I install again the Waves Maxxaudio?

  I thank.

  Hello

  Not quite sure what could cause this noise problem, but it is possible that this crackling appears due some latency issues more often than it appears because the CPU is stressed by processes that run in the background.

  I recommend you to check this using a tool called DPC latency checking.
  Check if anything else is originally from weak increases DPC

  For most issues could be caused by drivers like Lan or Wlan updates could help solve this problem

• How to remove extra photos of burst?

  I hope this is also the forum for questions related to photography...

  When I have a picture of the burst, I click on 'Make selection', then I choose a photo out of sequence (blue tick), then click on 'done ',.

  But how do I make pictures delete everything?

  Actually, I want to save space by removing all other photos in the explosion. It is fine if I can never restore the others pictures of the explosion.

  I use Photos 1.3 under El Captan.

  Photos for Mac Forum is here:

  Photos for Mac ntstatus 5Bpublished %5D % https://discussions.apple.com/community/mac_os/photos_osx/content?filterID=conte ~ objecttype ~ showall

  It is filed under software, Photos being part of MacoS X.

  To remove photos from a burst, use the option

  • Keep the selected photos and delete the others in the explosion, during the selection of the guardians.
  • Click on keep only Selection.The photos selected appear individually in the moment and not selected photos are placed in the album recently deleted. The rafale is no longer in the moment or in the album of burst.

• How to separate images in a burst of Photos?

  How to separate images in a burst of Photos?

  See this help page: https://help.apple.com/photos/mac/1.0/?lang=en#/pht56eafa987

  When you import a photo Photos broke, he appears in any moment and gusts album. When you open a glow, you can see all pictures in the burst and select your Favorites to work individually with.

  • Double-click the rafale at the time or in the album of gusts.
  • To select pictures of the explosion, click Mark an ellipsis button in the upper left corner of the photo.
  • Click on the photos you want to have individual photos, then click the done button.
  • Do one of the following:
  • Keep the selected photos and delete the others in the explosion: photos click on keep only selected Selection.The appear individually in the moment and photos not selected are placed in the album recently deleted. The rafale is no longer in the moment or in the album of burst.
  • Make selected photos appear individually and keep all the pictures in the radiance: Everything.The keep click on the selected pictures appear individually and made photo burst is still unchanged.

• My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

  My iPhone 4 takes ages to load the battery is swelling and burst on the back of the phone

  First of all, stop plugging him. Then, make an appointment at the Genius Bar at your local Apple Retail Store or contact Apple to arrange for your sent phone service.

• HP/Agilent 33120 A pulse, use burst mode

  Hello

  I'm trying to trigger a pulse of demand on from a HP 33120 A function generator.

  The pulse must be a 0 - 5V simple, with frequency/period adjustable ramp. I was able to get as much of the FG by use of burst mode and trigger manually on the front panel. Now, I would like to get the same functionality from a LabVIEW VI.

  Although there is a driver for the device, the burst feature is, unfortunately, not applicable to the model that I use. I found a similar problem on the forums and follow the code of the SCPI provided in the answer with some of my own humidification (http://forums.ni.com/t5/LabVIEW/33120A-Pulse-Mode/td-p/1088106).

  Unfortunately, my VI does not produce the same waveform as the manual release out of the front panel. It hovers at the offset value and gives me a few square wave to zero when I run the VI. Square waves are spaced oddly and I usually see 4-5, even though I specified 1 cycle in VI. The 33120A reading, I feel that this is of my do not turn off the previous signal but, if this is the case, I can't understand how I would do.

  I start to move away from using only the drivers by changing the code of the SCPI, but I'm still pretty new to this. Would appreciate some advice on what could be the problem. I modified my original VI twice; Once configure only the FG burst wave parameters manually and one just put up the waveform with no shine. The first don't not gave me much better results and the works of the latter very well so I'm back to the question of thinking are in transition.

  I enclose the original VI (b) with the two modifications to the case where (c and d).

  Hope to hear from you,

  Yusif Nurizade

  Edit: Burst chain should say TRIG: SOUR BUS instead of EXT, although neither works.

  Or you have the appropriate firmware in you function generator?
  Have you checked this with Agilent?

• Slow buffering when shooting in burst mode high with my 7DMarkii... What is the fastest SD card?

  When shooting in burst mode high with my 7 D Mark ii, I do not get optimal performance... the buffer fills up fast and backup... while I can't take shots more... I disabled the quite high definition noise reduction... Usually, I only have an SD card in the camera. I do not use the other card slot... is it because I didn't have the fastest SD card... For those of you who shoot regularly 7 D Mark ii, make it a point to always shoot with a SAndisk SD 95 map... ? I'd get better performance if I used the slot for CF card or both?

  IRIS says:

  I'm shooting with a single card (SD), a Lexar pro 64 GB 150 MB/sec Class 10 and 3 inside the U (whatever that means), but I show a limit 16 popping up on my screen... so I do not understand... I'm shooting a low ISO... I have disabled noise reduction... I'm shooting a Standard picture style... I'm shooting RAW only... My battery is charged... Then why is it backup and buffering so often? I forgot something? is it's just that the CF card is faster? .... I doh't understand why I don't get the perfromance promised high 20 + something burst shots...

  First of all, Yes, CF cards are faster.

  Second, the number you see is the current buffer and does not include the write speed of your card.

  The only way to tell what your real brightness issue is therefore to test.

  Shooting RAW to SanDisk Extreme PRO 32 GB 160 MB/s UDMA 7 CF Card, I get about 30 shots before the outbreak slows. My viewfinder shows 15.

  Note When your feature of gust of defined test cards your lens to manual focus (MF) because according to your settings of priority to focus the camera auto focus can slow or even stop your glow.

• How can I configure my Canon to take bursts of photos?

  Thank you. I looked through the book and can't find it.

  'Drive' setting (one shot vs. burst) is accessible by pressing the button on the back of your camera that looks like three rectangles that overlap (to the left of the 'Set' button). When you press it, it must offer you several choices... a single rectangle is the only mode of shooting. The rectangles that overlap are continuous shooting mode. There are other ways... as a self-timer 2 second (which also activates the remote IR sensor) and a 10 seconds self-timer mode.

  If you ask this question because you intend to shoot subjects in motion action photography, then you can ALSO change the mode of the development of the mode "One Shot" (default) to "AI Servo" (access this menu by pressing the "AF" button that is located just to the right of the 'Set' button). While "One Shot" mode leads to just focus once focus and shoot, the parameter causes the system update constantly track the subject and adjust the focus as it reviews the distance of the object changing "AI Servo". Although it may seem that you should just use this mode all the time, do not. A fire mode is better for still subjects. HAVE Servo is preferable to moving subjects (focal length change). There is also a "AI Focus" mode which I never use... it is not in itself a real mode... it causes the camera assess if he think that the subject is moving or not and then automatically uses the best mode (it behaves as if you were in One Shot mode, if it detects the movement and it behaves as if you were in AI Servo If it detects movement). But it takes the camera a few moments to do this assessment... so if you KNOW your subject will move still vs it is better simply to use the mode you know you will need.

• RAID offers the best burst rate?

  I recently install a new SATA III HARD disk, it is measured around 110 MB/s for the speed of the gusts, which is the highest speed (in megabytes per second) at which data can be transferred from disk interface (IDE or SCSI, for example) for the operating system.  I would like to improve the burst rate, someone has suggestions if RAID will be a good approach or not?
  Thanks in advance for your suggestions

  Hello

  RAID0, RAID0 + 1 and RAID1 + 0 all can provide some increase in performance, however the level
  is based on the discs and the methods used. Hardware RAID is likely to be the only one
  really useful. Check with the manufacturer of readers and the supplier of the device RAID/methods you
  you want to use as those are the only ones who will be able to provide the specifications of the real world.

  Have you considered a SSD? Check with the leading manufacturers of SSD (use BING and Google).

  ========================================================================

  RAID causes more problems than it solves. Especially for software RAID which is included
  on some motherboards.

  RAID<-- describes="" all="" types="" of="">
  http://en.Wikipedia.org/wiki/RAID

  Today, there are 3 "General Types' RAID

  Software, hybrid (some hardware with software checks) and material.

  Personally, I think that the software and the hybrids are a waste of time and misleading when claims of
  reliability are usually made. In most cases, an effective backup plan is better than these. All the
  too often, software RAID or the hybrid model in fact causes a failure. Or is it supposed to
  to protect the system crashes and power outages end up being the cause of them. Material
  RAID is by far the best.

  Hardware RAID
  http://www.bestpricecomputers.co.UK/glossary/RAID-controller.htm

  Hardware RAID is a physical hard disk controller that allows interactions of disk required
  to perform a reliable redundant Bay.

  Intel RAID controllers
  http://www.Intel.com/products/server/RAID/index.htm

  Adaptec RAID controllers
  http://www.Adaptec.com/en-us/products/

  Many low-cost software component snap-in RAID controllers are really a hybrid where a part of the action
  is done by the hardware of the map and the rest (and often more important functions) are performed
  by the processor in the system using software RAID.

  ------------------------------------------------------------------------------------------------------------

  Why RAID is (usually) a Terrible idea
  http://www.pugetsystems.com/articles?&ID=29

  I hope this helps.