HP/Agilent 33120 A pulse, use burst mode

Similar Questions

• Burst mode

  Recently when reading an article, I came across the phrase
  
  "f the application deployed using burst mode, then... otherwise if application is deployed as a Coop like ear, war etc. then...". »
  
  What is an exactly burst mode?

  Hello
  Please find below urls for a deployment of the application in burst mode.

  http://docs.Oracle.com/CD/E15051_01/WLS/docs103/deployment/deployunits.html
  http://docs.Oracle.com/CD/E11035_01/WLS100/deployment/autoDeploy.html

  Select this option if this helps you.

  Kind regards
  Kishore

• Sony As100v how can I use the burst mode?

  as the gopro, you can take a picture like 10 frames / second

  Burst mode is now available on the new firmware... But do not install it again. People who have problems with their cam action during and after the upgrade of the firmware. Wait a little more clearly and correct installation of the update.

• Generation of pulses using PCI-1428 to CC1

  My laboratory uses an external signal generator to generate a pulse to trigger a line scan camera and continuous acquisition of image acquisition card. The lab has just acquired a new camera and unfortunately I can not use the external trigger on the camera connection. I understand that PCI-1428 cannot external signal to a line of camera control. I tried to generate a pulse of MAX, but he won't let me have a pulse with less than 24 US pulse width.

  So first, I was wondering if there is a way to generate a pulse with less than 24 US of MAX pulse width.

  And if this is not possible, is there a way to generate a pulse of Labview similar to he'S generation.vi of pulse but he sent via the CC lines for the order? Also, how can I program it to make the generated pulse is sent as soon as the frame grabber receives / detects the start of the external signal?

  Thanks for your help.

  Don't know who did the file of the camera, but the 1428 can generate pulses with a period of 40ns on CC1 (a time base internal 50 MHz is used at the moment of high/low pulse). You can use NI Camera File Generator to modify existing camera files:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/14207

  It has good documentation for how to configure the settings of the pulse. If you still have problems, you can view the camera file, let me know what you're trying to use the mode, and which calendar you want pulse and I was able to address the issue, but I recommend trying OR Camera File Generator first... make a backup of your file to camera to keep your original autour.

  Hope that helps,

  Brad

• Slow buffering when shooting in burst mode high with my 7DMarkii... What is the fastest SD card?

  When shooting in burst mode high with my 7 D Mark ii, I do not get optimal performance... the buffer fills up fast and backup... while I can't take shots more... I disabled the quite high definition noise reduction... Usually, I only have an SD card in the camera. I do not use the other card slot... is it because I didn't have the fastest SD card... For those of you who shoot regularly 7 D Mark ii, make it a point to always shoot with a SAndisk SD 95 map... ? I'd get better performance if I used the slot for CF card or both?

  IRIS says:

  I'm shooting with a single card (SD), a Lexar pro 64 GB 150 MB/sec Class 10 and 3 inside the U (whatever that means), but I show a limit 16 popping up on my screen... so I do not understand... I'm shooting a low ISO... I have disabled noise reduction... I'm shooting a Standard picture style... I'm shooting RAW only... My battery is charged... Then why is it backup and buffering so often? I forgot something? is it's just that the CF card is faster? .... I doh't understand why I don't get the perfromance promised high 20 + something burst shots...

  First of all, Yes, CF cards are faster.

  Second, the number you see is the current buffer and does not include the write speed of your card.

  The only way to tell what your real brightness issue is therefore to test.

  Shooting RAW to SanDisk Extreme PRO 32 GB 160 MB/s UDMA 7 CF Card, I get about 30 shots before the outbreak slows. My viewfinder shows 15.

  Note When your feature of gust of defined test cards your lens to manual focus (MF) because according to your settings of priority to focus the camera auto focus can slow or even stop your glow.

• Can not leave completely insensitive - Firefox, use Safe Mode, reinstall or uninstall

  I installed Firefox less than a month ago. Two days ago, that he left suddenly during the navigation. This does seem like a problem, really - I thought I would just restart - but it REMAINS open. Shows the icon in my dock (on Mac), and the menu bar appears when I click on the icon. I can browse the menu selections but can not choose one.

  I can't:
  -Leave Firefox - from the menu or with Ctrl + Q
  -Open a new fenΩtre
  -Open help
  -Access to "troubleshooting information.
  -Select "restart with modules disabled...". »
  -Use the Safe Mode

  Because I can not use Safe Mode and cannot leave the program, I have IMPOSSIBLE:
  -Uninstall (it refuses to remove, because the program is 'open', as it won't leave)
  -Reinstall (I can't substitute the existing because the program is 'open')
  -Remove my dock
  -.. pretty much anything else.

  I've read many articles dealing with troubleshooting, Safe Mode, reinstall clean, etc, but unfortunately I can't make one of these because Firefox is open but completely insensitive.

  (PS - I tried to install the below troubleshooting information, but, even once, because Firefox is not responding, I couldn't open it lol - there was "no application available" to read it.) I can't go through the manual steps because I cannot access the troubleshooting information in the Help menu and so cannot even begin step 1.)

  If anyone has any suggestions, I would be VERY happy! I thank very you much for your time and help!

  If qutting, it's because of the questions are now trying down option as you click the icon in the dock and choose force quit from the list!

  Also you have tired Fox fire rest functionality (otherwise said if your power to access)
  To do:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

• I have an i phone 6 (9.3.1) I can disable burst mode?

  I get the burst mode, even though I type quickly once the button in photo taking!  I don't want this feature on my phone!

  At the top of the camera screen press "hdr" and turn it off.

• I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  -do not disturb - the settings on

• I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  Only thing you can do is to let die and then hold the home button when you plug it into your computer to put it in recovery mode.

  Actually if the phone is on and that you have an icloud account, you can delete it at distance of icloud.com

  Go to find my iphone and erase the phone.

• Is it safe to use Safe Mod with networking for the use of the computer every day?

  Hi, my computer has problems to start normally and I was wondering, is it safe to use Safe Mod with networking for the use of the computer every day? I use the computer like 10 hours + every day. Is this correct and safe? Thank you

  Hello, Winston,

  It is actually for troubleshooting only.

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Some applications may not work properly or not at all if you use safe mode with networking for everyday computing.

  Wireless network adapter may not work when you use the Option "Safe Mode with network.

  http://support.Microsoft.com/kb/305616

  Safe mode disables most of the processes and services running. These services include the Windows Update service. »

• Why can't I access the internet without using safe mode

  Help cannot access internet without using safe mode

  Hi Dharrington25,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to access the Internet using the safe, put your computer in a clean boot state in order to identify the program causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Can only use safe mode and can not access anything except firefox

  Basically, there are a few days all of a sudden, a box came up saying Windows Explorer has stopped working. No matter what I click, it returns constantly to the rear. Because I use firefox, I can't to anything except this, and I can't get him if I use safe mode.
  It is terribly annoying, I have 6000 + photos and other things I need, i.e. duties.
  How can I fix? I can't use the normal mode, and it's annoying.
  Thanks in advance.

  Then download your data either by:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  Then do a restore clean factory/install of Windows.

  I want to emphasize that you should not take what I wrote as a definitive diagnosis. I can't see or test your computer from here. I give you my opinion on your computer based on my experience as a computer tech and what you have written. If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Why do we need to use safe mode?

  Why do we need to use safe mode?

  https://en.Wikipedia.org/wiki/safe_mode

• Anyconnect Ikev2 uses aggressive Mode

  Hello world

  I'm trying to fix the IKE Aggressive mode with vulnerabilities PSK on our Cisco ASA that runs old IPsec and Ikev2 Anyconnect VPN.

  When I run the command

  Crypto isakmp HS her

  User using IPSEC VPN

  IKEv1 SAs:

  HIS active: 25
  Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
  Total SA IKE: 25

  1 peer IKE: 63.226.x.x
  Type: user role: answering machine
  Generate a new key: no State: AM_ACTIVE

  Then, he tells me that this VPN client is using aggressive mode right?

  User using IKEV2 anyconnect

  Crypto isakmp HS her

  17 peer IKE: 192.206.x.x
  Type: user role: answering machine
  Generate a new key: no State: AM_ACTIVE

  IKEv2 SAs:

  Session-id: 361, status: ACTIVE UP, IKE County: 1, number of CHILDREN: 1

  Tunnel-id Local remote status role
  x.x.x.x/4500 1696279645 192.206..x.x/33328 answering MACHINE READY
  BA: AES - CBC, keysize: 256, Hash: SHA96, Grp:5 DH, Auth sign: RSA, Auth check: EAP
  Duration of life/active: 86400/24756 sec
  His child: local selector 0.0.0.0/0 - 255.255.255.255/65535
  selector of distance 172.16..x.x.144/0 - 172.16.x.x/65535
  SPI ESP/output: 0xa315b767/0xbec2f7cc

  Need to know anyconnect ikev2 does not share any key of share pre then why the number of line 17 shows AM (aggressive mode)?

  The ikev2 Protocol has nothing to do with the aggressive mode or main at all.

  If you do a 'sh crypto isa"it will show you the the ikev1 and his ikev2.

  If you still see a flow in the table, maybe it's a stuck session.

  To disable the aggressive mode, enter the following command:

  Crypto ikev1 am - disable

  For example:

  HostName (config) # crypto ikev1 am - disable

• people will be banned for the use of mods for drunk dark on pc?

  I was watching to see if it is safe (by safe I mean may not be ban for it) to use the mod for drunk dark on pc. But I don't know if this is a ban or not. I would use the mod 60 fps, but I won't use it if I can be ban for her.

  Hello Brian,.

  Thanks for the reply.

  You can contact games for Live Support.

  http://support.Xbox.com/en-us/browse?product=games&category=PC-games

  http://forums.Xbox.com/GFW/technical_support/f/253/t/8569.aspx

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.