Business leader knows the connection/disconnection/display issues

Similar Questions

• Eternal HDD PX1266E - 1 25 retains the connection/disconnection

  I have an external HARD drive, type PX1266E - 1 25, that no longer seems to connect with my laptop.

  Until yesterday, everything worked fine, but then I started to hear the connect/disconnect sounds windows all the time (a first, later others and repeated all the 1-3 minutes approximately).

  They disappear when I remove the cable of the USB ports on my laptop HARD drive.

  If I look at computer Magement - Device Manager - Universal Serial Bus Controllers, I see that whenever I hear the sound connect, Device Manager refreshes and a new item "USB Mass Storage Device" appears between 4 'Intel (r) 82801 DB/DBM USB Universal Host Controllers"and 4 'root USB Hubs' already contained. When I hear the noise of the disconnection, the USB MSD disappears again.

  Following some comments I found on the web, I've uninstalled all the USB controllers and restarted, to clean, but that made no difference.
  If I right-click on the MSD line for the short period that it is visible and select uninstall, then reboot, my computer laptop actuall does not see the external hard drive (the balloons found new hardware USB 2.0 CD + HD and found new hardware USB Mass Storage Device appeared), but the drive is not really recognized (he normally stood like a G (: hard drive).
  Sometimes I get an error message as well after you have uninstalled the drive and when it is reviewed by the PC (a third balloon indicating that a problem occurred during hardware installation. Your new hardware might not work properly), but that only seems to happen if after uninstalling, I don't not yet restarted, but at the same time the HARD drive went through his routine to disconnect/connect again.

  Any suggestions on what I can do?

  Hello

  It of difficult to tell if it s really a laptop or drive HARD USB related issue s
  In your case, I would try to connect the HARD drive to another computer/laptop to check if the same thing would happen with an other other computers.
  This will help you know if his laptop or external HARD drive issue

  But to be honest, it seems that drive TOUGH question... maybe this disconnection messages balloon appears because the HARD drive stops working.

• I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The connection disconnects regularly "try to reconnect 1 20.

  Hello

  I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The regular connection disconnects after a few minutes, then displays the window pop-up "try to reconnect 1 20. It always with success reconnects itself during this first attempt. During the time when the connection is lost, the internet connection is fine, in other words, I could use my cell phone to browse the internet.
  Any ideas what could be causing this?
  Thank you.
  original title: remote to vista win7 desktop keeps losing connection and reconnection se

  Hello

  Follow the steps in troubleshooting section and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  The problems of desktop remotely

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

• P2415Q does not turn on the connection with display port cable

  Hello

  I have computer with Sapphire hd 7970, there display port and HDMI outputs.

  I plugged the cable I got with the monitor for mini DP DP and it worked well for a week,

  Today, I turned on my computer, that the computer turns on I hear the windows starting but there is

  no signal on the screen, so I tried to connect it with the second DP cable I have but it still does not work.

  I also connected the computer to another monitor DP cable and it works fine.

  Please notify.

  Thank you.

  * Turn off the monitor
  * Disconnect all cables from the screen, including the power cable
  * Press the power monitor in pendant button 15 seconds
  * Reconnect monitor cables and re - test

• No Notification sound when the connection/disconnection of USB device

  Hello

  I am running Windows 7 on a separate partition on a 2011 MacBook Pro (installed via Boot Camp).

  This laptop has two USB ports on the left side.

  If I connect/disconnect a USB device to the port more back, I get the notification sound as usual.

  However, if I log out these same devices to the port further there is no notification even if the devices are recognized & seem to work fine.

  Can anyone tell how to enable notification of this port please?

  John,

  Thank you for your response.

  The sound scheme has already been set to "Windows default", but just for good measure, I changed it but it made no difference.

  As mentioned be notified when you use one of the ports USB, but not the other.

  I posted this in an Apple forum & other users of this machine & installation are reporting the issue even if it seems to be a generic hardware problem & not just something on my own system.

  See you soon.

• Disable the connection / disconnection (Adobe Acrobat DC)

  How can the option "connection / disconnection" (Menu: help > login / logout) are hidden / disabled (Adobe Acrobat DC)?

  Currently, the following data in the JavaScript file is stored:
  app.hideMenuItem ("DetectAndRepair");
  app.hideMenuItem ("OnlineSupport");
  app.hideMenuItem ("LearnProduct");
  app.hideMenuItem ("About");
  app.hideMenuItem ("AboutAdobeExtensions");
  app.hideMenuItem ("endAboutPlugInGroup");
  app.hideMenuItem ("SystemInformation");
  app.hideMenuItem ("endGuideGroup");
  app.hideMenuItem ("endUsingGroup");

  Or could "SignIn / Sign Out ' (Menu: help > connection / disconnection) are disabled in the registry?

  Use of the registry keys to disable the help of more > connect / disconnect

  For continuous Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\DC\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  For the classic Build:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\2015\FeatureLockDown]

  "bSuppressSignOut" = DWORD: 00000001

  -Karan

• Garmin Forerunner 210 maintains the connect/disconnect when it is plugged into the HP Pavilion dv6-3040sd

  I have a problem connecting my Garmin Forerunner 210 (GF210) of my HP Pavilion dv6-3040sd. I know that the problem is with the laptop, because I have tried several other laptops and it works well. When I connect the device, windows installs the drivers. So far so good. When the drivers are installed, the laptop recognizes the GF210 and it connects. A window opens to let me choose what I want to do, but before I can decide the device is disconnected and reconnected. He goes on and how.

  On computers laptops onther the GF210 appears in the 'Computer' section as an external hard drive.

  My laptop is running on Windows 7 64 bit and all windows updates are installed.

  Does anyone know an answer to this problem?

  Hi HarmR,

  In fact I have some stuff in my bag!

  Because your system is unable to recognize the Garmin unit long enough to change the drive letter, I have recommended to perform a backup and restore of your operating system. This can be done by following this document on the backup of files (Windows 7), and more to perform a recovery of the system HP (Windows 7). This should restore your system to the factory settings.

  If the problem persists, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl
  
  I hope this helps!

  Have a great rest of your Thursday

• Need to know the model of display driver for Satellite Pro A10

  Hello! I'll try to find the exact display on my satellite pro A10 chipset model. The driver on the toshiba site is not updated, and I can't use the correct resolution (19 "Wide or 1440 x 900) on my external display.
  At the same time before I was able to update the driver correctly, just the search for generic driver "Intel 82852/82855 GM/GME" and software "extreme graphics" at the Intel Web site.
  But now, on the Intel site that they ask the exact model, which means that, if she is 82852 or 82855, and if it is GM or GME...
  Can U give the specific model please?
  My computer is a celeron 2500 MHz with 1 GB RAM and 30 GB HARD drive (standard)

  Thanks in advance...

  I found some details on this device and it seems that the laptop was equipped with the internal graphics controller Intel 852GM; code name: Montara GML

• connection / disconnection of the oracle database

  Hello
  I looked upwards and downwards in the documentation of oracle for a good reason why we should not connect to the oracle database, delivery time of 4 or 5 Oracle sql disconnect, reconnect 4-5 sql statements and disconnect again(using sqlplus).
  What I currently have is an application that has this kind of behavior that would be as connect/disconnect to the database over 300 times in 25 minutes.
  I know that this is not scalable, but would like to show the programmer in the oracle documentation that is not a recommended bestpractes.
  Any help will be appreciated.

  What you can explain the developer that is whathappens when a connection is given and terminated, the concept of the PGA and server allocation and dealloction process. You can include more use of server resources when all that happens. Once this part is well to him, you can tell him that hisapplication this constant opening and closing of session, it don't let not the server works optimally as morethan optimize work of its apps, server would be busy giving him the connection later by removing its connetion.

  Just take a look at the documentation and found this guide, PT
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/design.htm#CJHFIHFC

  >
  Factors that may prevent a linear scaling include:

  Configuration, implementation and poor application design

  The application has the greatest impact on scalability. For example:

  The poor schema design can cause expensive SQL that do not evolve.

  Poor transaction design can cause problems of locking and serialization.

  Bad connection management can cause periods of poor response and reliable systems
  >

  Would that help?
  HTH
  Aman...

  Published by: Aman... April 26, 2009 15:29
  Adding link guide PT

• PS the script to display the virtual machines that reside on a specified vSwitch

  In the process of migration of virtual machines to vSphere 5 Cisco Nexus 1000v running.  However, I need to generate a list of VMS still residing on the old vSwitch in a datacenter.

  I know the powerpack VMware display the VMCount, but it would be useful to be able to run the script every morning and send the list of virtual machines residing on the old vSwitch automatically.

  VCenter 5 running.

  You have probably more than 1 portgroup with this name

  Try it like this

  ## name of portgroup whose VMs to get info on $strPortgroupName = "MyPortgroupName"
  ## Get the View object of the Network of the given name, then get the View objects of the VMs on that network, and return the VMs' names Get-View -Id (Get-View -ViewType Network -Property Name,VM -Filter @{"Name" = $strPortgroupName} | %{$_.VM}) -Property Name | select Name
  

• Connect/disconnect USB

  Is there an API to connect/disconnect a USB device to the host/guest?

  I don't see no function definition for such a case of use in the API... it is "mission critical", so I thought I'd ask.

  No vmware employee confirms that they don't or don't not exist?

  There is no API avaiable for the connect/disconnect USB VIX SDK operation.

  -Thank you

  Sevin.

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Hello! I can't save my projects to the creative cloud... When I try to upload them to the cloud, it displays a message no connection. I am connected, so I don't know what to do, can someone help me?

  Hello! I can't save my projects to the creative cloud... When I try to upload them to the cloud, it displays a message no connection. I am connected, so I don't know what to do, can someone help me? I use Photoshop touch for iPad iOS 7 thank you!

  Are you connected to your CC account through the PS touch settings? Have you checked?

• I want to change your security questions and do not know the old issues and thank you

  I want to change your security questions and do not know the old issues and thank you

  If you have an emergency email address you can use to reset your questions. This option of rescue should be on https://id.apple.com after connection and asked for security issues. If this is not leading to a solution, call Apple: Apple for support and service - Apple Support Contact

  Be prepared to identify you as the account holder. They will ask you some things, I can't predict what, but usually the serial numbers or credit card.