No Notification sound when the connection/disconnection of USB device

Similar Questions

• Notification sound when the power button is pressed

  When I press on the on off button (to switch off my mobile phone) it emits a sound notification

  Unfortunately I went through all the menu of the phone to turn it off but to no avail

  I read in someforum that it is due to an update from sony

  All the solutions! I will be grateful

  Issue edited by Rickard

  There is an option called shortened accessibility accessibility. Can you check if this is permitted.

• No sound when the connected printer

  I have a Toshiba Satellite running Vista. There is no sound at all (if Youtube video or a CD) when my printer (Epxon Stylus CX6600) is connected to the USB port. I tried different ports, with the printer on and off - but as long as this cable is connected - no sound. If I unplug the cable, close and restart IE and then try the youtube video, the sound is excellent (even with Media player to listen to a CD of recovery). Any suggestions?

  Thank you

  Dawnvk

  I found the problem and it is fixed - I ran the Microsoft Fix tool and discovered that I had the wrong sound device as default.

  Thanks anyway.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• Eternal HDD PX1266E - 1 25 retains the connection/disconnection

  I have an external HARD drive, type PX1266E - 1 25, that no longer seems to connect with my laptop.

  Until yesterday, everything worked fine, but then I started to hear the connect/disconnect sounds windows all the time (a first, later others and repeated all the 1-3 minutes approximately).

  They disappear when I remove the cable of the USB ports on my laptop HARD drive.

  If I look at computer Magement - Device Manager - Universal Serial Bus Controllers, I see that whenever I hear the sound connect, Device Manager refreshes and a new item "USB Mass Storage Device" appears between 4 'Intel (r) 82801 DB/DBM USB Universal Host Controllers"and 4 'root USB Hubs' already contained. When I hear the noise of the disconnection, the USB MSD disappears again.

  Following some comments I found on the web, I've uninstalled all the USB controllers and restarted, to clean, but that made no difference.
  If I right-click on the MSD line for the short period that it is visible and select uninstall, then reboot, my computer laptop actuall does not see the external hard drive (the balloons found new hardware USB 2.0 CD + HD and found new hardware USB Mass Storage Device appeared), but the drive is not really recognized (he normally stood like a G (: hard drive).
  Sometimes I get an error message as well after you have uninstalled the drive and when it is reviewed by the PC (a third balloon indicating that a problem occurred during hardware installation. Your new hardware might not work properly), but that only seems to happen if after uninstalling, I don't not yet restarted, but at the same time the HARD drive went through his routine to disconnect/connect again.

  Any suggestions on what I can do?

  Hello

  It of difficult to tell if it s really a laptop or drive HARD USB related issue s
  In your case, I would try to connect the HARD drive to another computer/laptop to check if the same thing would happen with an other other computers.
  This will help you know if his laptop or external HARD drive issue

  But to be honest, it seems that drive TOUGH question... maybe this disconnection messages balloon appears because the HARD drive stops working.

• Manufacture of extreme dual band 802.11 airport "buzz sound" when the power supply is attached

  Hello

  which is very probably wrong with my Airport Extreme?

  My Airport extreme dual band 802.11 done "buzzing" sound when the power supply is attached. The sound disappears immediately when power is disconnected and begins as soon as you connected again. It started two weeks ago, and it's really annoying.

  THX,

  Laura

  Most likely, the question is a bad capacitor in the diet. These can fail and are, unfortunately, not serviceable by the user... unless you have experience with electronic repair. You can try Apple, but chances are that you will have the best chance to get a replacement from another source, such as Impact Computers & Electronics or eBay.  I'm sorry.

• I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The connection disconnects regularly "try to reconnect 1 20.

  Hello

  I use a laptop Windows 7 in the office wireless remote for my desktop running Vista. The regular connection disconnects after a few minutes, then displays the window pop-up "try to reconnect 1 20. It always with success reconnects itself during this first attempt. During the time when the connection is lost, the internet connection is fine, in other words, I could use my cell phone to browse the internet.
  Any ideas what could be causing this?
  Thank you.
  original title: remote to vista win7 desktop keeps losing connection and reconnection se

  Hello

  Follow the steps in troubleshooting section and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

   

  The problems of desktop remotely

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• How can I change the default actions of what made the PC when I connect a camera, USB key, etc.?

  How can I change the default actions of what made the PC when I connect a camera, USB key, etc.. My Samsung intensity II is what I need it for; I want to shoot to the top of this window asking me what to do when I plug in, but one day, I was not thought and press on 'No Action' with the "always perform this action for this device" (or said something like that) checkbox checked.

  Once it is connected, go to my computer, and your camera photo or anything else that should be there.  If is isn't, it is a completely different issue.  It's done, right-click on it and select Properties.  Click the AutoPlay tab.  There is a version of dialogue enough of this "window asking me what to do."  You can figure out what to do from there.

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Garmin Forerunner 210 maintains the connect/disconnect when it is plugged into the HP Pavilion dv6-3040sd

  I have a problem connecting my Garmin Forerunner 210 (GF210) of my HP Pavilion dv6-3040sd. I know that the problem is with the laptop, because I have tried several other laptops and it works well. When I connect the device, windows installs the drivers. So far so good. When the drivers are installed, the laptop recognizes the GF210 and it connects. A window opens to let me choose what I want to do, but before I can decide the device is disconnected and reconnected. He goes on and how.

  On computers laptops onther the GF210 appears in the 'Computer' section as an external hard drive.

  My laptop is running on Windows 7 64 bit and all windows updates are installed.

  Does anyone know an answer to this problem?

  Hi HarmR,

  In fact I have some stuff in my bag!

  Because your system is unable to recognize the Garmin unit long enough to change the drive letter, I have recommended to perform a backup and restore of your operating system. This can be done by following this document on the backup of files (Windows 7), and more to perform a recovery of the system HP (Windows 7). This should restore your system to the factory settings.

  If the problem persists, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl
  
  I hope this helps!

  Have a great rest of your Thursday

• No sound when the TV HDMI connection

  original title: I have Dell XPS 15z. When I connect HDMI to my LCD TV, sound is not from TV. He continues to come from the laptop. I tried to put the LCD as a default but option does not come.

  I have the Dell XPS 15z. When I connect HDMI to my LCD TV, sound is not from TV. He continues to come from the laptop. I tried to put the LCD as a default but option does not come. Let me know what can be done to fix this?

  Run a line of cable to the line in socket of your TV.

  Some HDMI sockets on laptops do not allow for audio transfer. Stereo line is the only way to go in this case.
  See you soon,.
  Jerry

• Laptop play outloud sounds when the headphones are connected.

  I have a laptop HP Pavillion with Windows 7 Home Premium, with a built-in microphone. I use my microphone on my computer to make Skype calls using the Skype program. I plug the headphones in my phone to hear what other people are saying in my Skype calls, however when I do this, other sounds coming from my computer are read aloud and do not get played in my helmet, so all those who are in the call to Skype with me can hear some sounds I play my computer.

  I would make sure all the sounds my laptop plays at all always go in the headphones and do not always play outloud as not to disturb the other memebrs in my Skype calls. Please help :( Is there a solution to this?

  Hi Swtgirl9314,

  Method 1:

  Step 1:

  In troubleshooting the problem, you can follow the steps below.
   
  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the reading notice the check mark next to the default device. For most users, the default device is pregnant, change of helmet. Make sure that the audio settings are configured as expected.

  Step 2:

  On the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  Step 3:

  On the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  Method 2:

  If the problem persists then I suggest you to apply these below mentioned steps to cut all other sounds when windows detects a communication activity.

  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the Communications tab.
  d. click on the radio button according to your needs, under when Windows detects communications activity.

  After completing the steps above, you can check the issue.

  For troubleshooting you can visit this link below.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

  Hello

  Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

  I have a Toshiba Satellite Pro L670.

  Even when the sound in Windows is turned off the laptop do a annoying sound.

  Thank you!

  Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

  Do you really want to work until the battery is completely discharged?

  Anyway, AFAIK this notification level BIOS cannot be disabled.
  Let's see if someone else is better informed than me.