Business support?

Similar Questions

• Linksys business supported products?

  Just curious to know who I'm supposed to call to get help?

  Think about these products http://www.linksys.com/en-us/business/products

  If I press the support, I can see a support page for a second before I get automatically redirected to the page of regular support.

  Should I just call my support regular end-user of countrys listed on this page?

  http://support.Linksys.com/en-EU/contactus?ICID=Cisco-home-networking-HN-FF-contact-us

  Thank you

  Chiftin

  I had the same challenge before.

  I was looking for the Australian hotline number for the business support Linksys help a friend because she needed help for his router in the company.

  What I've done I changed the location of the right side of the homepage in Australia uppper and clicked on the company, supported and he showed me a "call" option and voila... That's all...

  If it keeps redirecting you to the main site, you can use another browser.

• I can get windows business support activation key of the product outside the normal office hours. Duplicate a key after reinstall.

  The difficulty to activate a product key valid Windows vista business after normal office hours.  Is there an emergency number or support that I can use.  I have an urgent matter to finish tonight.

  You can reactivate your Windows Vista installation by doing the following:
   
  1. click on the Start button and in the box, type search: slui.exe 4
   
  2. press the Enter key on your keyboard.
   
  3. Select your country.
   
  4. follow the instructions for the activation of the telephone (toll-free).
   
  NOTE: When you call this number, you will first hear an automated voice. If the automated voice gives you an option to talk to a
  Live the Rep of Activation, select this option. If this is not the case, do not enter all the numbers. This should force the automated voice transfer
  an Activation Rep. Live trying to activate through the automated voice won't work, in your case, only through the Live Activation Rep
  your activation will be successful.

• Is there a calendar hired to releases of business support? I heard that FF 10 will be the first version with 'extended enterprise' support is true and if yes what FF 10 due ot?

  I am a customer of the company who had decide to drop the FF as a browser supported by our product, with the announcement of the ESR, that we consider adding FF to our product. However, I need to know which release the FF will be supported with extended time line and when it comes out. Is it FF 10?

  http://blog.Mozilla.com/blog/2012/01/10/delivering-a-Mozilla-Firefox-extended-support-release/

  https://wiki.Mozilla.org/Enterprise/Firefox/ExtendedSupport: Proposal #Proposal

  Firefox 10.0 is scheduled for January 31, as well as the ESR 10.0.

  Each version of ESR will be supported for 54 weeks.

• support site and pilot down?

  I tried to download the driver for CM1415fnw. But he urged that the site has been moved. Y at - it a problem on the website. problem occurred around: Singapore time: 20:40 date: 03July 2012.

  Here is the link to the site on the Business Support Center... same drivers just a different portal.

  CM1415

• M/T DC5800 MEBx / AMT support question. Help, please!

  I'm trying MEBx and AMT configuration on my Pc, I'm sure that my system supports, but I seem to be missing some options. When I press Ctrl-P to the HP splash screen it takes me to the login MEBx screen. I get my password and it takes me to another screen. The question is, are the ONLY options (s): 'Intel ME State Control' and 'Intel ME Firmware Local Update Qualifier. " the two are set to 'allow', but that's all I have, when I go into the BIOS, I found the following information: "ME Firmware = 3.0.4.1120", "ME the Management Mode = ASF"; THE system BIOS is v1.54, the OS is Vista Business x 86.

  What Miss me? Is there a software that is supposed to be installed on the Pc? I ask b/c I'm running an image, NOT the original image provided by default on the Pc. We uninstalled most, if not all, the HP software that came with the Pc. everything looks that the system is supported by the AMT, but I don't seem to have all the options.

  Go here and initiate a conversation active with HP support.

  I have a question for you. Why don't you reinstall the original software of the recovery partition?

  Your system is a professional PC. You're actually in the wrong Forum. Support for your PC is in the Forum of business support.

• Taken 4630e DeskJet supported in Windows 2000

  I have a legacy application that I have to run in Windows 2000.  (Windows is a guest OS running in a Virtual Box on a Linux machine).  I need to run the 4630, print only, function in the Windows operating system.  I need to know what previous printer driver will work in this arrangement, sine the 4630 drivers are not supported in Windows 2000.

  linux_is_best wrote:

  I have a legacy application that I have to run in Windows 2000.  (Windows is a guest OS running in a Virtual Box on a Linux machine).  I need to run the 4630, print only, function in the Windows operating system.  I need to know what previous printer driver will work in this arrangement, sine the 4630 drivers are not supported in Windows 2000.

  Business support called 1-800-334-5144 has learned to use the deskjet 990 C printer driver.  It has worked well.

• Gateway to Comcast Business class SMCD3G-CCR and Cisco 2960 G switch

  Hello

  I'm looking to upgrade my silent switches to a Cisco 2960 switch.  I wanted to check and make sure that this configuration would be funded.

  I need to configure the 4 VLANS on Cisco 2960 switch, 1 for the vmotion traffic, which would have no internet access, one for management traffic that does not have internet access, for standard server traffic and traffic vmserver, who should access to the internet.

  The Cisco switch working with gateway SMCD3G-CCR ok, or do I need another router for this?  If yes why?

  I don't know if this is the right forum but I know that Cisco linksys bough, so I hope someone can point me in the right direction.

  Thank you

  Hello.

  These products are processed by the Cisco Small Business Support Community.

  * If my post answered your question, please mark it as "acceptable Solution".

  Thank you!

• WRV200 IPv6 support

  Hello

  I would like to ask if there are reports on the development of the addedsupport firmware for IPv6 on the router.

  Hi Hanz and welcome to the community at the homepage of Cisco!

  The WRV200 is now the Cisco Small Business Support Community.

  For discussions concerning this product, please go here.

• Need help PLZ SPA9000 AA has busy signal

  When calling me the auto attendant has busy tone. AA has that tone.

  I can't find any help of wich in www good information I.

  I know this topi isn't in the right category, but I can't find a category for this question.

  Reset may not help.

  Please help me...

  Help!

  Hi transportertb and welcome to the homepage of Cisco community!

  The SPA9000 is now the Cisco Small Business Support Community.

  For discussions concerning this product, please go here.

• The support of SG300 - 10 TEAR?

  Hello!

  In the documentation for the CLI of the SG 300 series, it shows sh ip rip road as a command. I installed the latest firmware and this command is no longer available. Support of the SG300 series TEAR?

  Thank you!

  Richard S.

  Hello Richard,.

  My name is David Aguilar, and I am an engineer with Cisco Small Business Center. Thanks for writing.

  The SG300 series can't RIP. Only static routes (up to 32) are supported. However, models of SG500X support the dynamic routing RIP version 2 Protocol.

  Regarding the new firmware Sx300, he added a number of security features impressive including inspection IP ARP, DHCP snooping and encryption of SSD.

  All the best,

  -David Aguilar

  Cisco Small Business Support Center

• Support Cisco jobless number... 0800-187-3652

  This number is not affected in france.

  Quickly access the technical assistance Center (TAC) Cisco in

  sending a service request

  .  The way this is the fastest of the contact the Cisco technical assistance service to registered Cisco.com users with of one of the valid service contract. Join me the

  Cisco Community assistance

  pour to exchange information, solve problems, and develop your skills on Cisco products. Pour emergency network, call 0800-187-3652 (green number) service, then to option 3, 1.

  This number is preferable.

  08 05 54 04 27

  Cisco has change your chat message...

  Dear customer,

  Please contact the small business support community.

  Thank you for your comments, we enjoyed it a lot.  Just for future reference below is the link to the Small Business Support Center contacts

  https://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  Feel free to contact me if there is extra help, we can help you.

  Kind regards

  Jeffrey Rodriguez S... : | :. : | :.
  Support Engineer Cisco client

  * Please rate the Post so other will know when an answer has been found.

• You need to add a 3rd WAP to existing small business network. Where I start?

  The network has 26 ports Cisco switch and 2 existing WAPs, 1 of which is an air 1040, and the other I'm not sure but it resembles that of other.  I need to add a 3rd WAP for a small room.  I was going to use an other cisco 1040 air, but I don't know where to start.  There is a smaller, lighter WAP that works?  I have no experience in network configuration, so I'd like something simple.  Help, please.

  Thank you

  Laura

  Hello Laura

  My name is Eric Moyers, one of the Experts I wireless in the Small Business Support Center.

  Normally, I tell customer to add products similar to their outgoing network when they're trying to develop it. This prevents the learning curves to a minimum and help in getting enlargement and running faster. However, there are time going with brand new products are better, especially if you are trying to integrate the best technologies.

  The Aironet 1040 currently being End of Life / end of sale. You would need to look for a different model.

  He stay with the Enterprise Access Points level, the AIR 1602 has the same capabilitoes as the 104 you're too used. Price range is 300 above low 400 according to one where you look.

  If you want to look at small businesses, we have the WAP561 which is also dual Radio and should do everything the 1040 can or you can look at the WAP371 that is double also but includes a radio that can make the new signal "AC". These two serve 200 upper middle 200 depending on where you look. By the way that they look almost identical to the AIR1040 as well.

  I hope this can help you started, please let me know if I can answer anythin else or go deeper.

  Eric Moyers
  .:|:.:|:. CISCO | Eric Moyers | Cisco technical support |
  Wireless and monitoring subject matter Expert

  Please note useful messages and let others know when your Question has been answered

  You can click on my name next to the image if you want to email me directly

• SSLv3 WAP4410N is no longer supported in Chrome, Firefox

  Hi all

  I have a Cisco WAP4410N maintenance a small office for the technicians of the drop-in to connect to our LAN, no heavy traffic or fancy management put in place, they don't see it as a wireless access point can connect to the Internet and access a few Samba Sharing.

  Recently I was making mistakes in Chrome and Firefox that SSL version used by the device is longer supported.

  Chrome (v 40.0.2214.111 m).

  A secure connection cannot be established because this site uses a protocol not supported.
  Error code: ERR_SSL_VERSION_OR_CIPHER_MISMATCH

  Since Firefox (v 35.0.1).

  Firefox cannot guarantee the security of your data on 192.168.128.1, because it uses SSLv3, a broken security protocol.
  Advanced information: ssl_error_no_cypher_overlap

  The device is running version 2.0.7.4 firmware, released January 2014, y at - there no way to bypass this SSL error? So far, I was able to connect to the unit using THE 11, but I'd rather solve the problem causing the error SSL rather than using it as a work-around. Has anyone else had this problem?

  Hi guys,.

  problem is solved in firmware that is never released publicly - 2.0.7.6T1 or 2.0.7.6T2 (the two Beta status). These units are already EoL (which means that no new firmware is planned to be released) I suggest you open the service request to a Small Business Support Center (HWC) and ask the last beta firmware.

  Michal

• How to contact technical support?

  Hello.

  I'm totally lost on this web site.

  Question is simple: how to contact technical support? Phone number? E-mail?

  My questions concerns the RV220W, I can not find anywhere, any help on this, expect sound manual user guide.

  Kind regards.

  Hi Ashley,

  To contact the Cisco Small Business Support Center in the United States, their phone number is: 1-866-606-1866.

  For other countries, please consult the following page which contains the relevant list of contacts.

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  See you soon,.

  Julio