Button.Enabled = false (but still clickable?)

Similar Questions

• NLA authentication enabled everywhere but still a vulnerability in scans

  Hello!

  I have a weird problem. We use for remote desktop services on a computer that is running Windows Server R2 2012 to allow employees to use our main when remote software. I have authentication at the network level lit everywhere wherever I can find, including in Server Manager on the settings for remote desktop services and in the group policy for both computer and the PDC.

  Despite this, our analysis of compliance PCI said that he is still able to connect without NLA, which causes the test to fail. Anyone has any ideas on other where I could turn this or what could be causing malfunction? Thank you!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Norton toolbar does not work on the desktop but works on laptop. Shows desktop toolbar off, but there is no button 'enable '.

  The Norton toolbar does not appear on my desktop version of Firefox 24.0. It does not appear on my portable version of Firefox 24.0. The office shows that Norton was disables as incompatible with 24.0. But there is no button 'enable '. How to do back toolbar Norton?

  I remember a staff of Norton said several times that it may work better if you update Norton before update Firefox to the next version again.

• Pavilion dm4 2191 - us: Virtualization intel enabled in the BIOS but still not detected by HAXM insataller

  Recently, I was working on android, for AVD requiere (VT - x) is activated. After some research on the forums, I have it enabled in the BIOS (photos attached) but still have the error. I checked the hardware-assisted virtualization detection tool. I also updated the BIOS but still had the same problem. Kindly help me.

  

  Hello:

  See if the solution of Paul works for you:
  http://h30434.www3.HP.com/T5/notebook-hardware/hardware-virtualization-enabled-in-BIOS-but-not-detected-by/m-p/4889931

  Concerning

  Visruth

• I activated my microphone in the settings but there is no button "Enable track for recording.

  I use a Mono track, there is no button "Enable track for recording. Just cut track, solo track and write keyframes.

  Drop down Windows:

  

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Problem of communication series, ASRL end in zero votes and TermChar Enable false does not stop 0x0A character

  Hello

  I got in touch ok using VISA series read/write with a patient monitor and have almost finished getting all parameters in need of the monitor; However I am stuck now and is missing a value which is coded 0x0A.

  I googled and found that it is probably the message after this character, also yes I get the first 6 bytes or more.

  I subsequently put TermChar Enable false and end ASRL in None on the property node to read but still missing the additional (after the 0x0A) byte I need to calculate the necessary pararmeter.

  The attached picture shows the run configuration of VISA before the outside/front of the first major loop, then an inner loop where reading occurs. It seems that, even if I think I'll get the right pieces of the node property, I can't stop the playback stop character.

  Here, any help would be appreciated.

  Thank you

  I would recommend a configuration like this.  The idea is to read a byte at a time until the sync byte is found.  Then you read the next byte to get the length and then read this number of bytes.  I recommend using a queue to send the data to another loop for treatment.

  

• Enabled: false in StandardListItem (bug or not?)

  enabled: false property in StandardListItem just change UI to gray, but

  nav.deprecatedPushQmlByString(chosenItem.file);
  

  works in active: State false

  This is the bug or not?

  Hello

  To disable the list items, you have the right code in your title:

  enabled: false
  

  However, items can still be selected, which is in conflict with the API:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__control.HTML#enabled

  I highly recommend you log a problem for this one here:

  https://www.BlackBerry.com/JIRA/secure/dashboard.jspa

  Thank you!

  Martin

• method does not not for button enabled

  Hello

  I have a 3 buttons in the library

  I need:

  If I click to 1Configuration I see 1mc but that you can not click 2button and 3button, right after that I closed 1mc I can click for 2button and 3button and course for new 1Configuration

  why its not working in my example?

  Code:

  public function howToPlayScreen(event:MouseEvent):void
            {
                 trace("Open 'How to play screen'");
                 howToPlay_mc.closeBtn.addEventListener(MouseEvent.CLICK, closeHowToPlayScreen);
                 
                 howToPlayBtn.enabled = true;
                 moreGamesBtn.enabled = false;
                 thanksBtn.enabled = false;
                 
                 howToPlay_mc.visible = true;
                 moreGames_mc.visible = false;
                 thanks_mc.visible = false;
            }
            public function moreGamesScreen(event:MouseEvent):void
            {
                 trace("Open 'More games screen'");
                 moreGames_mc.closeBtn.addEventListener(MouseEvent.CLICK, closeMoreGamesScreen);
                 
                 howToPlayBtn.enabled = false;
                 moreGamesBtn.enabled = true;
                 thanksBtn.enabled = false;
                 
                 howToPlay_mc.visible = false;
                 moreGames_mc.visible = true;
                 thanks_mc.visible = false;
            }
            public function thanksScreen(event:MouseEvent):void
            {
                 trace("Open 'Thanks screen'");
                 thanks_mc.closeBtn.addEventListener(MouseEvent.CLICK, closeThanksScreen);
                 
                 howToPlayBtn.enabled = false;
                 moreGamesBtn.enabled = false;
                 thanksBtn.enabled = true;
                 
                 howToPlay_mc.visible = false;
                 moreGames_mc.visible = false;
                 thanks_mc.visible = true;
            }
            public function closeHowToPlayScreen(event:MouseEvent):void
            {
                 howToPlay_mc.visible = false;
                 trace("Close 'How to play screen'");
            }
            public function closeMoreGamesScreen(event:MouseEvent):void
            {
                 moreGames_mc.visible = false;
                 trace("Close 'More games screen'");
            }
            public function closeThanksScreen(event:MouseEvent):void
            {
                 thanks_mc.visible = false;
                 trace("Close 'How to play screen'");
            }
  

  Try instead to use mouseEnabled.

• All of a sudden, I can't create a new tab. The button is there, but when I click on it nothing happens. Firefox running 30.0

  I only have the tab open but still impossible to create a new tab by clicking on the button "open a new tab. If I'm at a Web site and right-click, I can tell the page to open in a new tab. But I can't get the new tab button to work. It will also not work Ctrl-T

  Inform your employer about this problem. The developer will have to address this add-on attachment.

• 31.0a2 (2014-05-06), since this version cannot close tabs, when the tab is closed, it became inactive, but still visible, I had disabled tab mix addon but nada

  When closing the tab, it became inactive but still visible, I had turned off the mix tab add on but Nada, same problem. What should I do my Aurora lots of tabs, that I don't have.
  Restart Aurora did not help eider.
  Please fix it, thank you

  Hello again,
  OK, that's the Tab Mix Plus that disrupt the system, had a drink in 31.0a2 (2014-05-07), I would try to install their last WORM DEV as they suggest, but no change, then I would disable it for now to know their answer on.
  one thing: it is impossible to disable or enable the Adds in safemode, but no problem to start, restart aurora whenever he asked the condition.
  Thank you

• extensions.blocklist.Enabled; False

  extensions.blocklist.Enabled; False
  prevents the extensions that you install personally be disabled.

  If you have an a bad mozilla should rather provide a delete button for this particular plugin that performs the actions required to destroy.

  Why wouldn't anyone since the age of back remove the button of a Yes Yes No button to quit smoking?
  Maybe cause their stupid enough to take bribes from companies of big brother?

  When in fact long term is not like a bastard for the end user would give tons of money from happy users looking for a permanent donation button.

  Mozilla donations can be made here:
  
  Make a donation today. Join Mozilla

  extensions.blocklist.enabled; false : disables blocking by preventing update

  Extensions are not the same as Plugins, even if they are both classified as Add-ons, as well as themes. Essentially, the Plugins are installed by external programs and are made available to Firefox via the Windows registry. Plugins are not installed in the program files Firefox folders, which is the main reason the plugins cannot be uninstalled from Firefox, only disabled.

• When I click on the bookmark icon in the Google toolbar that asks to connect you that I do, but still cannot access my favorites.

  My OS is Vista Business and I'm on Firefox version 8. I'm using the Google toolbar and I have an icon for bookmarks, but when I click on it a message «Connect to access your favorite Google.» I signed but still cannot access my favorites.

  The Google toolbar is not compatible with versions of Firefox beyond Firefox 4. If you override the extension for compatibility is enabled in Firefox 8, which will not work because Google has changed the URL to connect a few months before; who crossed the Google toolbar even further.

• Screen black after using the HDMI cable, but still slightly visible screen

  Hei

  I got a c850-10 X. Brand new. Used only for a week or two.

  When I connected it to my TV (LG 42') with a HDMI cable it worked fine. But when I do not use my TV as a screen of my laptop is a black screen. Now I can only use a second display as screen alone because my laptop screen is black all the time. It is not completely black, I can still see my desktop slightly behind some sort of black cloud. If I make the screen brighter, I see a little more.

  (It is not the "shear screen" or "Fn + F4" problem, my screen on the laptop is just black. No matter what I do)

  I read a few tips and tricks on the internet for this problem, and I tried the switch off, remove the load cable and remove the battery and press the power button for 30-60 seconds before I put in the battery and then restart my laptop. But still no luck.

  Why is this happening? Anyone know? What is a wire between the screen and the under part of the laptop?

  A driver problem? Tried to uninstall the driver from the Intel card, but then the screen went APE, so I reinstalled it again.

  Everything worked fine until I used my TV as a screen ekstra...

  I have an older Toshiba laptop where the same problem apperied, but this laptop has served for about 4-5 years so I thought that I just get a new...

  Post edited by: lars.hel

  When you want to use for laptop only and disconnect the switch to HDMI cable to LCD only by using the FN + F5 key combination and when you see the desktop on the screen to disconnect the HDMI cable.

• Block a message on Macbook but still receive it on iphone?

  I would like to stop a message by a number display on my macbook but still receive it on my iphone. Is there a way to do this? Both devices work with the last OS update.

  Launch Messages.

  Click Messages in the menu bar and select Preferences.

  Select the account and then click on tab "blocked."

  Click the "+" button at the bottom left.

  Select the name in the pop-up window.