Enabled: false in StandardListItem (bug or not?)

Similar Questions

• Problem of communication series, ASRL end in zero votes and TermChar Enable false does not stop 0x0A character

  Hello

  I got in touch ok using VISA series read/write with a patient monitor and have almost finished getting all parameters in need of the monitor; However I am stuck now and is missing a value which is coded 0x0A.

  I googled and found that it is probably the message after this character, also yes I get the first 6 bytes or more.

  I subsequently put TermChar Enable false and end ASRL in None on the property node to read but still missing the additional (after the 0x0A) byte I need to calculate the necessary pararmeter.

  The attached picture shows the run configuration of VISA before the outside/front of the first major loop, then an inner loop where reading occurs. It seems that, even if I think I'll get the right pieces of the node property, I can't stop the playback stop character.

  Here, any help would be appreciated.

  Thank you

  I would recommend a configuration like this.  The idea is to read a byte at a time until the sync byte is found.  Then you read the next byte to get the length and then read this number of bytes.  I recommend using a queue to send the data to another loop for treatment.

  

• extensions.blocklist.Enabled; False

  extensions.blocklist.Enabled; False
  prevents the extensions that you install personally be disabled.

  If you have an a bad mozilla should rather provide a delete button for this particular plugin that performs the actions required to destroy.

  Why wouldn't anyone since the age of back remove the button of a Yes Yes No button to quit smoking?
  Maybe cause their stupid enough to take bribes from companies of big brother?

  When in fact long term is not like a bastard for the end user would give tons of money from happy users looking for a permanent donation button.

  Mozilla donations can be made here:
  
  Make a donation today. Join Mozilla

  extensions.blocklist.enabled; false : disables blocking by preventing update

  Extensions are not the same as Plugins, even if they are both classified as Add-ons, as well as themes. Essentially, the Plugins are installed by external programs and are made available to Firefox via the Windows registry. Plugins are not installed in the program files Firefox folders, which is the main reason the plugins cannot be uninstalled from Firefox, only disabled.

• Button.Enabled = false (but still clickable?)

  Hello dear Forum,

  Got a button (any png defined as a button in the library).

  You drag the button on the stage, given an instance name "btn".

  By clicking the button triggers an eventListener that does all the right things, except...

  BTN. Enabled = false;

  .. .only changes the cursor to a pointing arrow. What? It is still clickable.

  My intention is to disable the button, so you can't click on it. But you can still click on it. Not good.

  QUESTION: How do I disable a button and stop him from which is clicked?

  Thanks for your support,

  Johan

  REASON: I'm temporarily disable the button so that you can not click on it several times while loading other stuff. Makes sense.

  To disable the button (a homegrown SimpleButton) use its mouseEnabled property.  I think that enabled applies only to button in AS3 components.

• Medium need to return false if a value has not yet been written.

  I am a new user of labVIEW here looking for a way to return false if the value has not yet been written.

  I am using the "select" tool to swap between values early enough in my simulation. However, it requires data that has not happened yet, so I need something that is waiting for the value to write.

  Is it possible to use a while loop to wait until TRUE or FALSE (instead of NULL) has been written and then change the frequency?

  All instances of data in LabVIEW (controls, terminals, constants, shift registers etc.) have a value, there is no concept of NULL.

  A Boolean control, before write you, will be its default value (probably false). A string will be empty (but not NULL, it is always valid). A digital will be zero, a reference is not valid (possibly equivalent to NULL, but this terminology is not used.)

  Can you describe your needs more detail, I don't understand what you need to do.

  If you want to wait for a change in value (Boolean to change true), then survey (read several times) from the Terminal command in a while loop with it connected directly to the terminal of condiitional. Its default value of False will cause the while loop loop continuously until the value is set to True. I would advise to insert a short wait inside the loop so that it hoggig a CPU.

• Error: Windows Update cannot enabled updates, because the service is not running.

  Original title: update for windows vista.

  Windows Update is not enabled updates, because the service is not running.

  I spent all day trying to update via different methods on different for one without a bit of luck.

  Can anyone help?

  Windows Update is not enabled updates, because the service is not running.

  I spent all day trying to update via different methods on different for one without a bit of luck.

  Can anyone help?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Reset.

  Get the tool system update (save) for your architecture system and do a right click on it and "Run as Administrator". Choose the right one for you:

  • All supported x 86 Windows Vista (32-bit) versions
  • All supported based on x 64 (64-bit) versions of Windows Vista

  Let things run/fix.

  Reset.

  Try to update.

  If it still fails, try the following:

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• Fast user inop on vista switch. How to re - enable it. "gpedit.msc" is not recognized when I try to use it.

  original title: I see questions but no answers. Fast user inop on vista switch. How to re - enable it. "gpedit.msc" is not recognized when I try to use it.

  I have vista on my dell desktop pc. Some how I managed to disable the fast user switching and I wan't to reactivate. I see this same issue, and it implies that the answer to the question, but I see no real response. I see online that using 'gpedit.msc' will open a window to access the problem, but my computer can't find it. Can you please help.

  The Group Policy Editor is not included in the Home of Windows versions. You can use one of the other methods in this article:

  http://www.Vistax64.com/tutorials/89939-fast-user-switching.html

• How to disconnect 'research suggests "? The "browser.search.suggest.enabled = false" function does not work!

  Even the obvious stop 'research suggests', the browser continues to send queries to the search engine chosen by me. It is a function of bug or spy?

  Due to a completely different subject, I think I discovered the cause of this. Maybe you've already found it in the course of the last 5 months, but just in case:

  When you click in the search box, Firefox opens a connection to your search engine. It is not send anything, but this allows you to get an answer more quickly once you submit your search. It's called a "speculative bond" and apparently appeared in Firefox about 15 of Firefox.

  • http://bitsup.blogspot.com/2012/04/making-Firefox-search-snappier.html

  You can test the following approach for this turn off? This sets the cap on the number of these connections to zero:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the speculation and make a pause so that the list is filtered

  3 double-click the network.http.speculative - parallel-limit and set it to 0 (zero).

  Does it work?

• bug: 'drive not ready' which was already fixed bug is back

  When you try to start VMware so that you have mounted a vmdk with vdk.exe jobs appears an unnecessary error message / false.

  It is harmless but annoying as it prevents automatic start of virtual machines

  The bug was present in the earlier version but had been fixed with 6.5.0, if I remember correctly.

  Now with 7.0.0. He's back.

  Whereas from VMware seems to check all drives available - and it merges if it finds something unexpected.

  Suggestion: ignore all this. It is not really important if a vmdk is mounted everything by starting the workstation.

  See screenshot of the error message-
  
  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

  Maybe this indication could be useful for you: http://pavlovich.org/musings/?p=3

  ---

  Paul Svirin

  Software developer StarWind ( http://www.starwindsoftware.com )

• run_job use_current_session = FALSE doesn't work does not work

  I try to use run_job with the use_current_session set to FALSE. However, when doing so, the work doesn't seem to work. The logic below runs successfully when using use_current_session set to TRUE.
  
  Issues related to the:
  1 - is due to the fact that I am up the job at the end? If so, I'm not sure I understand the operation of the auto_drop when creating a job.
  2. we are new to Oracle 11.2.0.2. Are there any special installation which must be completed before performing with the whole use_current_session false?
  
  
  We use Oracle 11.2.0.2
  
  
  
  v_job_name: = DBMS_SCHEDULER.generate_job_name ('BillToTax_');
  
  DBMS_SCHEDULER. CREATE_JOB (job_name = > v_job_name,)
  job_type = > 'EXECUTABLE. "
  job_action = > ' / u01/appfiles /' | v_folder | ' / taxware.ksh',
  credential_name = > "billit." | v_user,
  activated = > FALSE,
  number_of_arguments = > 2);
  
  dbms_scheduler.set_job_argument_value (job_name = > v_job_name,)
  argument_position = > 1,
  argument_value = > a_file_name);
  
  dbms_scheduler.set_job_argument_value (job_name = > v_job_name,)
  argument_position = > 2,
  argument_value = > a_file_invoice_id);
  
  dbms_scheduler.run_job (job_name = > v_job_name use_current_session = > FALSE);
  
  dbms_scheduler.drop_job (v_job_name);

  Hello

  2 things.

  -Once finished the adjustment to the top of your work, you must call dbms_scheduler.enable to activate the work

  -Once you have activated the job, his schedule is to work immediately in the background, so it runs in the background as soon as it is enabled and you don't need to call run_job here.

  Hope this helps,
  Ravi.

• Location bar search returns false favorites. Bug?

  Say I save a bookmark to "mozilla.org" and give it the name "XYZ". When I type "XYZ" in the address bar AutoComplete suggests the bookmark for mozilla.

  Now say I rename this bookmark, describing it as "ABC" instead. Now * two * 'ABC' and "XZY" will give me the bookmark for mozilla as a suggestion.

  In other words, location bar autocomplete seems to remember the old bookmark names instead of forgetting them. Bug or feature? If the latter, no way to turn it off?

  Hello oda.krell, I think it is a feature. It is not the old name of the bookmark that is stored - part of the algorithm which suggests results in the drop-down field once you start typing in the address bar will remember which characters you typed in and which you have chosen accordingly. This is done to this site plus the next time that you start to type the same characters from the list...
  This type of data is stored in the moz_inputhistory table in the places.sqlite file in your profile folder (which also holds your bookmarks and history). You can use an addon like https://addons.mozilla.org/firefox/addon/sqlite-manager/ to inspect or modify some items stored in this database.

• I enabled private browsing. It does not work, and I can't delete it.

  The menu history shows all my recent history. I enabled private browsing. AND... There is no "Clear history" button in the history menu, so I can't delete it. How can I fix these two?

  Private browsing does not add to your story, but it does not erase the history.

  You can in history history/bookmarks library entry remove either single, multiple entries or the entire folders. There are also menu options to erase history etc. See

  • Private Browsing - use Firefox without saving history
  • It shows several options: remove the navigation, search and download history on Firefox
  • Also the individual elements of the story can be viewed and deleted similar to bookmarks How can I delete a bookmark? _deleting-more-than-one-Bookmark-or-Folder

• Order PREMIUM from HP and the MOUSE (a bug or not?)

  Hello world!

  I was wondering about how works MOUSE(), so I tried a few experiments...

  Try please copy the following code:

  EXPORT MoozCMDTSTing()
  
  BEGIN
  
   PRINT();
  
   While <>GETKEY() 4 / / Esc to EXIT
  
   PRINT (MOUSE ());
  
   WAIT (0.02);
  
   END;
  
  END;

  {As a result, if you do not touch the screen, you have a list with 2 empty sublistes: {{}, {}}.

  Now if you touch the screen with a finger, you have a half-filled list {{datas for pointer 1}, {}}.

  If you put a second finger on the screen, you have your full list! {{datas for pointer 1}, {datas for pointer 2}}.

  Up to now, it's perfect, but...

  If you remove the first finger of the screen, you have your list filled {{datas for pointer 2}, {datas for pointer 2}}!
  TWICE the same values!, Rrrrrrrr!

  I prefer a half filled one like this {{datas for pointer 1}, {}} because now that one finger to touch the screen.

  A bug...

  Kind regards

  Damien.

  Interesting. Don't know if it's a bug, but I'll certainly invesitigate I don't see why it would not be consistent behavior. However, I think that the second list would be full and nothing in the first.

• My favicons are not showing for all of my favorites as well as some current bookmarks imported and when I opened the topic: config it says "browser.chrome.favicons; false." If this should not be true, and how to change?

  I had to rebuild my computer and when I imported all my favorites that they had no favicons. I started to receive some of the favicons when I go to the websight that he reconnect, but now I can't seem to see any of them. I did a Google search and a tech site suggested the subject: config file and that the 'browser.chrome.favicons; false' must be set to true. But when I switch to true and restart Firefox is once again set to false. I know, it doesn't seem much, but it's very annoying to not have the favicons.

  Help me Obi Wan Firefox you're my only hope.

  The browser.chrome.favicons preference must be set to true, as it is does not have the value when you restart Firefox, see the article How to fix preferences that will not save for possible causes.

• IKEv2 with certificates: bug or not?

  Hello

  I am tryting to test the IKEv2 VPN connection, which is the use of certificates for authentication. Customer must be on MAC or iPhone/iPad. Because I have encountered some problems, I looked more community and found a few messages that describe the problem just the same thing I've come across.

  So, before making any programming, I wanted to make sure that IKEv2 VPN can be established, using "clean" OS (without anything other than the new facility). Also, I tried to configure VPN connection through boxes of integrated dialogue OS and/or via Apple-Configurator created VPN profiles. Unfortunately, none of these methods was successful.

  On MAC, trying to establish a VPN connection, I get errors like:

  ...

  The 5 February 10:26:59 132 nesessionmanager [9447]: could not find the VPN enforcement for plugin type com.apple.neplugin.IKEv2\

  The 5 February 10:26:59 132 neagent [9824]: IKEv2 Plugin: ikev2_dns_callback: error-65554\

  ...

  On iOS, a bit different:

  ...

  6 Feb 10:48:49 Gorans-iPhone nesessionmanager [3427] : NESMIKEv2VPNSession [srxapple:B853702D - A36D - 4 D 70-A780-5A28FDE4C449]: received an order of preferences Startup [3681]

  6 Feb 10:48:49 Gorans-iPhone nesessionmanager [3427] : NESMIKEv2VPNSession [srxapple:B853702D - A36D - 4 D 70-A780-5A28FDE4C449]: changed to connecting status

  6 Feb 10:48:49 Gorans-iPhone nesessionmanager [3427] : Plugin com.apple.neplugin.IKEv2 is not a bundle URL

  6 Feb 10:48:49 Gorans-iPhone neagent [4003] : IKEv2 Plugin: ikev2_dns_callback: error-65554

  ...

  Within the community, the same errors are already reported, but it seems that nobody has found a solution for it. If I understand correctly, is not programming question, but OS bug or bug installation, no matter what.

  The question is: why the system cannot find VPN enforcement for the plugint, which seems to be within the OS. Looking through the MAC file system, I am able to find some inIKEv2.vpnplugin/Contents/Info.plist /System/Library/Frameworks/NetworkExtension.framework/Versions/A/Resources/Plug and files, so it seems that the plugin is there, but the question is: is it in the right place, or something is missing?

  On iOS, error is a bit different and points out that the plugin didn't bundle URL. I don't understand the meaning of this error.

  Can anyone help with this? No work around which may help? Is there anyone who could open the support request (feature request, whatever it is called), I'm not able to do? I would appreciate any help with this issue?

  BTW, I reported this problem on El Capitano (latest version), as well as on iOS 9.2.1

  You seem to be triggering a bug:

  https://github.com/Lionheart/openradar-mirror/issues/6082