Button inside the Movie Clip

Similar Questions

• Clickable button inside the movie clip symbol?

  I would like to know how I can have clickable buttons inside a movie clip symbol.
  
  
  Thank you.

  Your problem is mainly code compared to the location of objects location. When you start the file, the keys 1 to 8 are classified under code because they are visible, while the 9-11 thru buttons are not because they live in a non-current setting of the miniature timeline. When you switch to the side MORE things, these buttons is not any code assigned to them, and when you come back, the same is true for the first eight buttons because they were out of the picture and lost their connection to any code (the previous assignments have been already spent to frame 1 of the main timeline).

  What you should probably do is locate your button code for frames where the buttons in the thumbnail movieclip. In this way, their code is always where they are. The code of the keys 1 to 8 will be in frame 1 of the miniature clip and the code for 9 to 11 will be in frame 2. You need to change the code for the form:

  thumb1.onRelease = function() {}
  _parent.gotoAndPlay("1");
  };

  And you're going to do you a favor if you do not use the numbers of the labels.

• AS3 putting the buttons inside the Movie Clip

  I'm practicing AS3 (after years of AS2) and can't have a button inside of a clip speaks to another clip on the main timeline. Here is the code:

  OneButton.addEventListener (MouseEvent.CLICK, OneButtonClicked);

  function OneButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (1);

  MovieDescription.gotoAndStop ("One");

  }

  TwoButton.addEventListener (MouseEvent.CLICK, TwoButtonClicked);

  function TwoButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (2);

  MovieDescription.gotoAndStop ("Two");

  }

  The code above works, but if I put OneButton and channels within a clip, I know can target the MovieTarget and MovieDescription. The reason that I want to put OneButton and strings inside it's own MC is so I can dim each hit after top by switching the playhead within this MC help. ? Thank you!

  Start from the beginning

  Press f8 and choose movieClip, then draw your button movie untoggled call then create another movie and create your button toggled or grayed button and call it greyedButton.  Go to the main stage add 2 instances of button and 2 greyedButton (just drag the library).  you have 4 instances on stage.  give the name of the instances of appeal and place them one over the other so you can see 2 buttons on the stage.  put the button greyed under the button.

  now with action script

  Button1.addEventListener (MouseEvent.CLICK, OneButtonClicked);

  function OneButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (1);

  MovieDescription.gotoAndStop ("One");

  Button1.visible = false; Here the button greyed will show

  }

  Button2.addEventListener (MouseEvent.CLICK, TwoButtonClicked);

  function TwoButtonClicked(event:MouseEvent):void

  {

  MovieTarget.gotoAndStop (2);

  MovieDescription.gotoAndStop ("Two");

  Button1.Visible = true; Here button1 will return to its orignal State

  Button2.visible = false / / here will show the button greyed

  }

• Help. Button inside the Movie Clip will not work

  So I have a MovieClip (the instance name: menu) which has a transition used on it, so I had to put the (House) button, I wanted to work on the parent (main) layer inside the MovieClip, but it does not work on the parent layer. Why is this? What should I do?

  You are welcome.

• How can access a button inside the video clip

  I have a button named a_btn. This button is located in a clip name a_mc passage. This button is on the first frame. then when you write the code for that:

  function submit(event:MouseEvent):void

  {

  trace ("hii")

  }

  a_mc.a_btn.addEventListener (MouseEvent.Click, Submit);

  his work. but when I keep this button on 2nd chassis or anywhere not in 1 frame inside that movie clip, then I get error runtime as:
  TypeError: Error #1009: cannot access a property or method of a null object reference.
  to NewFlashDocument_fla::MainTimeline / NewFlashDocument_fla::frame1 ().
  How can I access this button on the second picture...

  You cannot reference an object until there are.  Thus, if a_btn is on the 2nd frame of a_mc, you must wait until this 2nd frame plays before trying to refer to a_mc.a_btn.

  If not, put a_btn on the first image and set its visible property to false in the first frame and true as part of the 2nd.  Then you can use your current code and duplicate the design you are trying to achieve by moving the button on the 2nd frame.

• button inside the movie will not react to the reversal

  Hello
  I'm developing some kind of film where the image scrolls around. That works, but when I try to define some hotspots on this by adding buttons to the movieClip that I can't respond to the action of reversal (onRelease and delivery) it is already used by the main movieClip.
  Any ideas on a work around?
  I read 4 hours and can not find a good solution.
  

  You must remove all mouse managers assigned to all clips of ancestor. Use a loop and hittests to replace all these managers of mouse you have deleted.

  for example:

• Animation inside the movie clip symbols in the part "header" of the web site

  Question: should I do a header animation of the website. seconds, it happens and is stopped with action script command stop(); but I need an elenment inside the flash header continue to animate like here: http://ves-lab.ru/ a scalable logo in the upper left corner of the header. If somewhere the answer has already been written - someone write a link to this source. Thank you.

  Make this entity that continues to animate a separate with its own animation movieClip.

• Create a button in a movie clip for ipad

  I am trying to create a button in a clip for an ipad app (a button next to a slide show, the slide show page is a clip.
  This is the code that I have tried. Button = nextbutton, video clip = artworkmovie. I want just the button to advance the movie clip an image.

  nextbutton.addEventListener (MouseEvent.CLICK, nextClickHandler);

  function nextClickHandler(event:MouseEvent):void

  {

  artworkmovie.nextFrame ();

  }

  It works very well from the scene, but if I have the button 'next' in the film 'artworkmovie' I get the error "Line19 1120 access of undefined property nextbutton. (Line19 is "nextbutton.addEventListener (MouseEvent.CLICK, nextClickHandler);") How can I create a path to the button? I tried artworkmovie.nextbutton and that has not worked.

  Sorry for this one basic question and thank you for your help.

  artworkmovie.nextButton should work.  Make sure you have the name of button assigned to each keyframe in the movieclip.

• return to the main timeline of the movie clip

  well on my main script, I have an intro, and then a main menu. in this menu, it goes to a clip, I want to create a "back to main menu" button inside the movieclip that will return a certain group in the main timeline.

  can someone help me in this encoding to use?

  see you soon

  What about the fact that you have a problem with?  Do you know how to code a button? If Yes, you can program the button in the main timeline so that all you have to do a gotoAndStop() command is used...  In the main scenario where there is the mc...

  yourMC.theMCButton.addEventListener (MouseEvent.CLICK, gotoMenu);

  function gotoMenu(evt:MouseEvent):void {}

  gotoAndStop (menuframe);

  }

• Images of iPod touch - volume of the .mov clips

  Hello

  When I use an iPod touch pictures, the .mov clips sound volume is too low, even if I turn as hard as possible in Final Cut. How can I get stronger?

  Thank you!

  Unfortunately, it really isn't that you can do. You could make a new project and put just the clips that need to be more strong in there, then set volume as loud as it goes, then export than as a video, and then import that new video in your regular project (except that it is strong this time) and you can increase the volume at maximum again. If all goes well, which should help. However, the quality may be slightly reduced.

• Command button inside the column heading in the table of the ADF

  Hi all
  I want to insert two command buttons inside the column header of a table of the ADF.
  In my mind these buttons should replace the buttons two default (triangles) to sort the column in ascending or descending order.
  You know a solution? Because it's 2 days I'm trying, but no way.
  
  Thanks in advance
  Stefano

  have you tried facet the af pane header: column?

  
    
      
      
        
          
          
        
      
    
  ...
  

• Check the status of MSO 2 by a button inside the OSM 1

  Hello world

  This is my problem:

  1. I have two objects of State Multi (I'll call her MSO 1 and 2 of the WHO)

  2. I need a button inside the OSM 1 States to control 2 MSO

  the problem is when I create the button inside the OSM 1 and choose "go to State" action, I can't choose the 2 MSO (MSO 2 name is not displayed)

  is there a limitation of dps for that kind of interaction? If this is the case, is there a solution for this?

  Thanks in advance

  F.

  This is actually a limitation of InDesign. You cannot add a button to a MSO that points to a different MSO.

• Several events (button inside the Panel)

  Hello
  I have a button inside the Panel and the button and dishes and accessories Panel have "click" event What I need to do, is when the user clicks the button, only the event assigned to the button get fire, NOT the Panel ' click on ' event.
  
  Help, please
  Thank you

  I found that it only works if you create an array for the columns, edit, and then assign to the data grid:
  CGI Columns = aColumnsNew; reassign the array to the dtaGrid

  This: 'dg.columns.push (dgc);"does not work.

  Tracy

• Button in a Movie clip inside a part of the pane scroll - AS2

  I have a scrollpane component instance named myScroller in a swf file.  It is related to a movieclip named media.  Inside the movieclip are buttons that don't work when they are inside the scrollpane.  A button called "morris" so I tried to put the code on the timeline for the movieclip.

  this.morris.onRelease = function (): Void {}

  _level8._visible = true;

  _level8.gotoAndStop (2);

  }

  It doesn't work - I tried to put it on the main timeline - above the scrollpane.

  myScroller.morris.onRelease = function (): Void {}

  _level8._visible = true;

  _level8.gotoAndStop (2);

  }

  Specific help would be appreciated!

  ~ Judy

  OH - I just read the discussion on an e-mail link in a scrollpane.  I had the same problem - in the scrollpane properties BLAH, I got clcked scrollDrag a reason any.  Now it works!  Thank you

• AS3: see the hide the elements of the movie clip, single button array.

  Hello and please forgive my Noobdity I teach myself AS3 and stuck on what are obviously the basics.

  I did the simple animations for years without using any AS3 at all, the time has come to take seriously.

  I read the daylights out of all reference documents Adobe now but I am stuck on this task.

  I have 4 objects of movie clip whose visibility I control with two buttons.

  First button, two of these visible clips and the other two will make visible = false

  For example: Mc1 and Mc2 > visible, Mc3 and Mc4 > visible = false

  The second button run the same function but in reverse

  Eg: Mc1 and Mc2 > visible = false, Mc3 and Mc4 > visible

  I've determined correctly or incorrectly reading endless and looking for a table should be the best way to do it.

  I may have to use the child feature add but * shrugs, I'm lost atmo

  I've been blunders on the code for the first of two simple buttons.

  I start slowly form a mindmap what should be done, but it's early days.

  Here is my code and please feel free to

  Last attempt tries to use the mouse on the trigger to control the visible state of the second two clips.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  internal _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.visible =! item.visible;

  }

  }

  acComp_btn.addEventListener (MouseEvent.MOUSE_OUT, _wcComp);

  internal _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.visible =! item.visible = false;

  }

  }

  Currently run 1050 error: impossible to assign a value, not reference.

  The text in blue works with 2 clips of film acArray of course, where the attempt to use the mouse on.

  Any advice on the solution or the best method to implement would be greatly appreciated.

  For what you're trying to make a table is more complication than a solution, you have already divided in two arrays anyway probably due to this tax... and have two buttons to do isn't necessary, but you may already be knowing that since you have only code for one of them in any case.

  All you need is a button that activates the visible properties to their opposites.

  var array: Array = [myMovieclip2, myMovieclip3, myMovieclip1, myMovieclip4];

  myMovieClip1.visible = myMovieclip2.visible = false;  or the other two... depending on what initially as invisible

  btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans tableau)}

  Item.visible =! item.visible;

  }

  }

  LF, you must have two buttons to do the opposite, as you say, then clicking on buttons must end up affecting all the buttons, no not only one of the tables you have done.  If each button should do what you say, then you should not use the! operator since that can go the opposite of what you intend, so you must assign the desired state.

  var wcArray:Array = [myMovieclip1, myMovieclip2];

  var acArray:Array = [myMovieclip3, myMovieclip4];

  acComp_btn.addEventListener (MouseEvent.CLICK, _acComp);

  function _acComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans acArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in wcArray)

  Item2.Visible = true;

  }

  }

  wcComp_btn.addEventListener (MouseEvent.CLICK, _wcComp);

  function _wcComp(e:MouseEvent): void {}

  for each {(var point: MovieClip dans wcArray)}

  Item.Visible = false;

  }

  for each {(var item2:MovieClip in acArray)

  Item2.Visible = true;

  }

  }