buy new printer online

Similar Questions

• P1102w: Buy a new printer or the more expensive replacement toner cartridge?

  My P1102W printer cartridge is empty.  Can I buy the printer brand new for $15 and less than just buying a replacement cartridge.

  I see the replacement cartridge is capable of 1 600 pages, but can't find anything that describes the ability of the cartridge in stock.

  Why should I buy a cartridge replacement on this basis?  The replacement cartridge have more ink and print to that effect more pages than the cartridge that comes with the printer?

  Thank you

  JASPERADO wrote:

  ....   The replacement cartridge have more ink and print to that effect more pages than the cartridge that comes with the printer?

  Thank you

  Hello

  Normally Yes, cartridges that come with the printers (Laser and ink jet, all suppliers) have fewer inks/tonners - in many cases only around 50%.

  Kind regards.

• installed a laptop lenovo with W8 and my printer will not work now. HP technical support response is to buy a new printer. He won't have no more copies. Worked fine earlier

  It prints the test page for some troubleshooting programs

  Visit the HP website and check there is a driver for your operating system, if it is not HP technology is correct buy a new printer.

  If there is a driver go to desktop, go to the folder on the taskbar icon, just click on computer go to system properties go to advanced, go to hardware settings go to settings click on device won't let me choose and never install driver through windows update, and then save the changes.

  Have the printer on but do not connect the USB cable. Load the downloaded driver and connect USB cable when prompted. Use this method if you get a new printer, because as soon as you plug the printer into it will default to windows update for the driver that is allowed in most of the cases, but not all, especially for pilots to scan.

• DeskJet 4645: New printer connected but do not print (without wireless or USB)

  Hi, I recently bought an HP deskjet printer advanced 4645... I had an old Officejet... So, I just installed with the new printer, everything connected and implemented. It is on the wireless network and communicates properly with the Internet. It fits on my computer and watch when it is offline or online and I can view on computer ink levels, so he communicates with her (same model scanning worked...). The ePrint (by e-mail) works and AirPrinting of an iPad in the works...

  BUT it won't print from the computer... Not at all... I reinstalled the program several times (app HP doctor suggested this), I swapped the printer where I bought it thinking it was a dud, I tried to connect via the USB cable... Nothing... Help, please

  Hi, I installed the driver full and tried everything... I ended up buying an officejet thinking that it was the deskjet sends me problems...
  
  BUT it still does not... I then found a place where you uninstall drivers conpletely (not in the Panel @ devices...)
  
  It is in devices and printers (Panel)
  Select a printer and then on the top of the page, click the tab saying "Server Properties".
  Then select the driver you want to uninstall
  Click on delete
  And TADA

• LaserJet: Can I force a newer printer to imitate the old Laserjet model?

  Try to replace the printer on an instrument of laboratory a few years to find the compatible template.

  Printer provided originally is Laserjet 1100.

  The system works very well with the Laserjet 1100, I believe with 1320 and other series of 1000, but NOT with the LaserJet 2000 or later.

  Is it possible to force a newer printer (for example P2035) to "pretend" that it's the 1100 model?

  The 1100 uses only PCL5e; the P2035 has PCL5e as one of its languages, but still does not print correctly.

  I believe that the instrument asks the printer port & request "who's there?" and adjusts its output according to the response of the printer; seems he misunderstands P2035 response and other models I've tried like P2014.

  No, I can't change the behavior of the instrument or the exit without a VERY expensive change.

  Centronics parallel connection, I believe that a parallel-USB adapter would not help.

  Test options are very limited due to the location of the instrument in a biological laboratory; If something is happening here that it can exit only by autoclave!

  Any ideas out there?

  Frankly I recommend you buy a LaserJet P3015, then go online and buy a parallel EIO port, they are cheap on ebay.

  HP EIO parallel port is supported in the P3015, but this just printer model is no longer supported, but it is still available if you go out and get a fairly quicklvy.

  Your other option is simply to find a used LaserJet 4000, 4100, or 42 X 0 printer, these models all have a built-in parallel port.

  I just discovered the P3015 be be abandoned to randomly talk to someone in sales to the company that I work.

  Due to another scenario, I checked the parallel EIO port that made HP is compatible with the P3015.

  The parallel port also work in HP P4015, but HP does not guarantee that it does, I saw it work properly from any PC in this way however external Jetdirects will have problems with it. I do not know how he would react on your lab equipment, that's why I recommend the P3015 which you can always buy new with a warranty.

  If my post decided and your problem please mark as a solution. You can thank all tech for a good post giving him a helping hand to the top just click the button below the post.

• Exchanging ink - new printer uses a different former ink

  Hello

  I was wondering if anyone else has experienced this problem.

  I bought hp ink cartridges for my old printer through hp.com since I bought the printer about 6 years ago.  I worked from home 3 days a week and used my printer very often.  For the last year and a half that I have been on disability and the printer has not been used much.  He just died on me so now I'm moving buy another.  I decided on a printer hp again and was sold online (no HP.com).

  I had 3 cartridges not open my old printer and called hp to see if they traded the ink in my new printer ink since I bought HP ink only.  They said that as the printer did not buy from HP.com, they exchanged not these cartridges.  However, if I wanted to send the new printer back and buy at hp (at a much higher price than what I bought to) the same printer, they could then swap the ink.

  I think that's outrageous.  They can check my order history and see how much I've bought from them.

  I want to send this return printer and buy ANOTHER brand of printer so I don't give them $1 more of my money.  Their ink cartridges are so costly it may be.

  @wst459

  I send you a message in your Inbox forum with some information.

• HP Photosmart C4280 all-in-one: what hp printers use ink 74 & 75? Buy new ink if my C4280 always says 'no cartridge detected ink?

  This printer has worked well in the past. It is a bit old. I used one that has a fax for a while, but after I have does not need that 1, I put this 1 upward again... maybe a year ago? Recently, it does not recognize the ink as being installed. I think I bought cartridges 74 & 75 maybe 2 months ago so that they are fairly new. I looked at the help on this forum and tried from the back and then pull the plug out for 15 seconds and connect again... no help. I read how to remove the cartridges and where the cartridges go in... no help. I even unplugged from the rear and the plug for 20 minutes... no help.

  I read somewhere on this forum without other printers use 74 & 75 ink (or was this one of them?). So if I had to buy new ink and is not the problem...?

  Can someone help me?

  Thank you!

  Hello

  The following change can help:

  http://WWW8.HP.com/au/en/PDF/HP_Printer-to-cartridge_compatibility_guide_tcm_184_1233104.PDF

  Kind regards.

• 6520: 6520 Setup cartridges do not work in the new printer

  By putting my new cartridges to install in my new 6520, I get the error message 'after the cartridges installation initialization stage does not more' and I have to replace for new.

  I can do that I can use the cartridges - they came new with the printer and I don't want to buy new before printing any page.

  Hey @PBA259,

  Welcome to the Forums of HP Support!

  I understand that during the installation of your new cartridges in your new Photosmart e-all-in-one printer of HP 6520 you get the message that "after that installation initialization phase cartridges cannot be used more» It does not sound like you have a defective set of cartridges of the installation. When you own a printer, as your HP Photosmart camera, they require special configuration cartridges to initialize and preparation of your ink system. If the installed cartridge is damaged, you must go directly to HP to get those replaced with new cartridges of configuration. You cannot buy cartridges installation of the store. Even if you have left and a brand new genuine HP set of cartridges for your printer model, your printer would not complete initial implementation without cartridges installed.

  At this point, because you get this message out of box with your Photosmart HP 6520 I would recommend that contact you the queue of our Support technical telephone to explore ink replacement options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Please inform the Technical Support agent of exactly what message you receive on your printer output of the box with cartridges installation. I wish you good luck!

• Try to find a new printer that runs on Windows NT 4.0

  I am buying a new printer to use on my business network. They used a server terminal server called Citrix Adage. I need to know what drivers are compatible with Windows NT 4.0, since this is what adage runs on. My colleagues told me they were trying to install a driver for Dell 1720dn on it and it crashed the server. I'm pretty certain that I will not see all printers now-a-days they go on the market that it is compatible with NT 4.0. A successful driver they use for some time is the driver of HP LaserJet 5N. They use it on almost all of the printers that it works on. I'm sorry I'm being rather scatter-brained right now. Will review tonight.

  EDIT: done the more accurate title

  Hello

  The printer manufacturers are responsible for the generation of drivers that work between their hardware and the operating system.

  To determine if they have a Windows NT 4.0 driver, you will need to go the manufacturer's site and see what drivers are available.

  Best regards

  Matthew_Ha

• How do you get a printer online if it is offline?

  HP 8600 all-in - one was launched in offline mode and I can't get it back on.

  [Moved from comments]

  Hello

  1. who is the operating system installed on the computer?

  2. what happens when you tried to make the printer online?

  3. do you receive any error messages?

  This problem occurs if the computer has the following registry value configured when you set the printer status offline .

  Method 1:

  You can read this article and follow the steps provided.

  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  http://support.Microsoft.com/kb/2027593

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 2:

  I suggest you to follow the steps below and check if it helps:

  a. open the start menu, click Control Panel, and click on the "Printers and faxes" icon This will open a window with a list of the printers currently installed on your computer.
  b. double-click the icon of the printer that you want to change online. It will open a pop-up window describing all current print jobs.
  c. go to "printer" in the menu bar of the pop-up window and uncheck "use printer offline." This action will change the printer from offline to online mode.

  See also:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=3984415&prodTypeId=18972

  Hope this information helps. Response with status so that we can help you.

• Need idea of new printer for my continuous ink system

  Hello, my old HP 6510 comes to break, which had been hung to a CIS I liked (refills waiting so want to continue to use this particular CIS).   Looking for ideas on printer of the new HPs that will work with my CIS (HP02/802) Please!

  Regarding my use:

  used printer for a home (mac and PC)

  print a color mixing and pages without color,

  Print and copy about 50 pages a week.

  Must be a good color used for a few photos and graphics printer

  Does not need to be fast but I hate paper jams

  Fax not important but would like to scan

  I am very grateful for your help! I need to buy one as soon as possible

  You could buy a printer of opportunity on ebay, the models here support the HP 02 cartridges:

  Compatible printers (out since July 2005)

  • " HP Photosmart 8200 printer
  • " Printer HP Photosmart D7100
  • " Printer HP Photosmart D7200
  • " Printer HP Photosmart D7300
  • " Printer HP Photosmart D7400
  • " All-in-one HP Photosmart 3100 Series
  • " HP Photosmart 3200 all-in-one series
  • " All-in-one HP Photosmart 3300 series
  • " HP Photosmart C5100 all-in-one series
  • " HP Photosmart C6100 all-in-one series
  • " HP Photosmart C6200 all-in-one series
  • " HP Photosmart C7100 all-in-one series
  • " HP Photosmart C7200 all-in-One series
  • " HP Photosmart C8100 all-in-one series

  With a volume of printing only fifty pages per week, a CIS system may be exaggerated.  I print on my Officejet 8600 thereon more and have just replaced the cartridges once in eighteen months.

• A9J40B: New printer: HP Envy 5530 transport Jam/Paper Jam

  I just purchased and received this printer. After the installation of the configuration and installation of the printer, he tried to print a report, but it will never work.
  He guard sends me errors and says that there is a blockage of the cart. I looked inside everywhere but this is a new printer and it seems perfectly clean. Its power to seize a white paper and then spits white. It keeps eating all the paper and sometimes give an error. I can continue or clean all that I want, nothing seems to help the problem. I tried the wizzard but he said all right and I need to print a status report, but I can't.

  I really hope I will get this problem solved, because this is a new printer.

  Greetings, tnx in advance, Jasper.

  Hey @Sjappie84,

  Welcome to the Forum from HP Support.

  I understand that you encounter some false jam errors on your HP ENVY 5530 e-all-in-one printer.  I would like to help.

  This is what looks like a brand new printer, I recommend that join you our technical support team. You can click on the following link to start a business: www.hp.com/contacthp/

  Once you complete the form online to build your business, you can choose among different means of direct contact (email, phone, chat).  This will be your best option to enjoy your printer warranty options.

  I hope this helps.  Have a great day!

• HP Officejet 7110e: HP 7110 does not obey the "Black only" Print option. : - result person wouldn't want to buy HP PRINTER.

  HP must discover new such as printer driver software to solve the only black option (6600/6700/7110) means black alone will consume, otherwise no one will buy HP printer. I already suffer from level of ink color cartridge 'only Black' option... feel good too dissapointe. HP hopes will solve as soon as possible to maintain their high position in printer marketing even when... Thank you.

  HPARUN wrote:

  I understand the technical problem on the print head to clog the question, but why not run like 1180c or hp hp 1000 as printer that handles both inks or ink only (black)?

  Deskjet printers 1180c or 1000 have printers IPH - the print head is built into the cartridges.  If the print head is clogged, the replacement of the cartridge will also replace the print head.

  The Officejet 7110 printer has IIC, individual with piping ink cartridges and print heads separated to connect.  The printer running with one or more colors of voids can cause the air in the plumbing and/or damage to the print heads.

• New print head for V715w?

  Anyway is to buy a new printhead for Dell's Dell V715w printer (or someone else)? The current print head is therefore nothing good, I have about $ 150 of ink on the spot and I would use it.  I can't believe that Dell does not place a small piece of plastic/silicone and expects me to just buy a new printer.

  -Aurélie

  Aurélie,

  We found that the price of a print head is the price of a new printer. If the printer is under warranty, contact Dell.

  If this isn't the case, then try these procedures.

  Cleaning the printhead Dell V313w V515w, V715w, P513w and printers P713W AIO

  Solving the problems of print head on the Dell V313w V515w, V715w, P513w and printers P713W AIO

  Rick

• Single mother. No technique. New printer HP F4280. Can't understand why I can't just plug in the cable on AT

  I am a single mother who has been trying for days to get help to connect a new printer HP F4280 (a friend gave me) to my router AT and T Uverse. I guess it's a router, but since I'm not technical it could also be a gateway? In any case, I found a cable that can connect to the printer. But there is no room at the back of the gateway or the 2WIRE981 to connect. I had my 22 year old daughter, go to a few places and show them the cable and I also took a photo of the back of the gateway. The guy wasn't so smart and said that I had plugged incorrectly. I don't have. My daughter did not understand completely even if I gave him the photo of the back of the unit. AT and T will not help me because it's a technical question. They want me to pay $15 per month for technical service or a one-time charge of $50! As a single MOM with 2 kids, I don't have the luxury to pay it! In addition, I could end up buying another cable. Any help, in non-technical terms, would be so appreciated!

  You need to enable sharing the printer on your Mac
  1. start the system of preferences by clicking on the "System Preferences" icon in the Dock.
  2. in the System Preferences window, select the sharing of the Internet & Networking group preferences window.
  3. the sharing preferences window contains a list of available services that can be run on your Mac.

  Place a check mark next to the item "Share printer" in the list of services.
  4. once the printer sharing are enabled, a list of printers available for sharing.

  Place a check mark next to the name of the printer you want to share.
  5. close system preferences.

  Up to now a printer choices go, it is up to you, according to your needs.