Messed up installing bootcamp. Help restore the partition of drive of Fusion.

Similar Questions

• When I opened outlook express Inbox, all messages have been deleted, please help restore the same

  When I opened outlook express Inbox, all messages have been deleted, please help restore the same

  Go to view | Current view | Show all messages to make sure that you have just selected 'Hide read messages.

  If this does not help, check your Recycle Bin, the bak files which are dbx files, you can restore backups.  See www.oehelp.com/OETips.aspx#2

  If this does not help, then you will probably need my program DBXpress (www.oehelp.com/DBXpress/), which will extract the messages from individual dbx files, and if messages are no longer in the files, it can extract from the disc itself.

  Steve

• Cannot install Windows 8 on the replacement hard drive

  I got the replacement from Dell hard drive which he said would come with Windows 8 and pre-installed drivers. Well, I installed the hard drive and he said no. OS can be found. I didn't have a chance to make my own backup discs, but Dell sent a CD Windows 8 recovery media with the laptop and now with the replacement hard drive.

  When you try to install Windows 8 on the new hard drive, I get to the part where it tells me to choose a partition to install Windows 8 on and none of them will not let me. There are 5 to choose from and I don't know what to do to get past this. The largest partition either 5A about 934 GB of space left out of 1 TB, but as I said I can't choose it or one of the other ones for the installation.

  You just have to click on next, in any case, despite the message?  Otherwise:

  Start on the DVD of Windows 8, instead of install now, click repair your computer, Advanced Options, invites ... when it opens, type the following:

  DiskPart
  Select disk 0
  clean

  Then, try to install.

  The above will remove all the data partition and disk, allowing you to do a clean install on an empty drive (these scores are not required, and Windows will create its own partitions (two) he needs to install and run).

• I have my photos in the F drive an external drive. LR5 records my photos in the partitioned hard drive, D drive in my computer. Why I can't change the dafault in LR5 player?

  I have my photos in the F drive an external drive. LR5 records my photos in the partitioned hard drive, D drive in my computer. Why I can't change the dafault in LR5 player?

  When I 'import' a RAW/DNG file, the file gets automatically saved the item COPIED in my D drive under "My pictures" folder This info is available on the left panel. Instead, I want the file to go in my F drive which is my external hard drive.

  Lightroom help: explains how to import photos to a specific location. Scroll down to section 5, «Say Lightroom where to put your photos» Lightroom help | Import photos from a camera or card reader

• How do I restore the partition hidden bootcamp

  Hello

  I had the partition, bootcamp for windows 7 and I had restored the bootcamp. Bootcamp deleted the partition, but it could not restore the main HD storage size. How to restore the free space.

  

  Hello there, elixir_125.

  Looks like you're wanting to reformat the hard drive on your MacBook to delete the Bootcamp partition. The following Knowledge Base article offers up how to do this:

  How to reinstall OS X on your Mac

  Wipe your drive and install OS X

  Generally, you don't need to erase your startup disk to reinstall OS X. The OS X Installer is designed to allow you to perform an installation in place during the same version or earlier versions of Mac OS X. If you transfer your Mac to a new owner, you can clear your integrated boot disk before you reinstall OS X.

  Important: Before you remove and reinstall, back up your important files. If you are using a MacBook, MacBook Air or MacBook Pro, make sure that the power adapter is connected and plugged all by performing the following steps.

  You can use these measures to erase files on your startup drive and install a fresh copy of OS X:

  1. Before you begin, make sure that your Mac is connected to the Internet.
  2. Restart your Mac. Immediately hold down the command (⌘) keys and R after having heard the startup sound to boot into OS X Recovery.
  3. When the recovery window, select disk utility, then click on continue.
  4. Select the volume name back from your startup disk in the left side of the disk utility window, then click Delete.
  5. If you want to erase the disc safely, click Security Options. Select an erasing method, and then click OK.
  6. On the Format menu, choose Mac OS extended (journaled). Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.
  8. If you are not connected to the Internet, select a network in the Wi-Fi menu.
  9. Select the option to reinstall OS X.
  10. Click on continue and follow the instructions on the screen to reinstall OS X.

  Additional options

  If you want to reinstall the version of Mac OS X included with your Mac, or if you have to reformat your entire startup disk, press Command + Option + R to start instead. This starts your Mac recovery of the Internet.

  If you have more than one partition (like Boot Camp) and you want to delete the complete startup disk, you can use disk utility to remove the partitions or re-partition your hard drive. Start up your Mac in recovering from Internet, then use utility to repartition your boot disk drive until delete you it. Make sure that you back up important data from all partitions before repartitioning of a disc.

  Thank you for being a part of the communities of Apple Support.

  See you soon.

• can someone help me? I have a packard bell pc with windows xp pre-installed - how to restore the pc back to factory settings that there is very little memory available

  can someone help me? I need to restore a packard bell pc with windows xp pre-installed at the factory settings.

  thanx

  Theresa

  Hello

  · Why you restore to factory setting?

  · What is the model number of the computer?

  I suggest you to contact the manufacturer of the computer for better assistance to restore the computer to factory setting.

• HP ProBook 650 G1 L4A21UT #ABA: windows 10 update and restore the partition

  I have recently updated from Win 7 to 10 to win. I'm assuming that the Win 7 recovery partition was intact. Is this a problem?

  Also, when I restarted after the upgrade, accelerometerST.exe "not found."

  I googled for it and found the link to 10 to win, but I was unable to download.

  Should I just ignore the missing .exe?

  Kind regards

  Joe (aka Malcolm)

  @K8MP

  Creating recovery media is something done before the partition is non-functional.

  The 'Upgrade' comes with the ability to 'come back' to your operating system already installed.  There is a time limit: If you want to "go back", you must do so within the 30 (or 31) days from the date / time of the migration to Windows 10.

  The 'go back' is a provided Windows mechanism - it seems that the method works (to restore the previous operating system / full environment) most of the time.  The 'go back' method does not work, you prefer should be prepared to install the operating system.

  Now that you have your digital license of Windows 10 (also known as the 'right'), you can "go back" or reinstall Windows 10 at a later date.  Your license for Windows 10 "sticks", in other words, Microsoft a record or your license so you can return to / install Windows 10 on this same machine.

  DavidPK tips

  Update Windows 10 and HP System Recovery

  Your Systemis Windows 10 drivers - it is a good indicator that the computer runs Windows 10 with less problems if the system was not supported for the new OS.

  If you decide to stay on Windows 10, consider using the image / ghosting software to create a "recovery disc" disc.

  Example:

  Macrium Reflect free

  There is an active Macrium Forum where you can read how other view / use the product.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Restore the partition not used since upgrade hard drive

  Hello

  Several months ago, I replaced my 80 GB HDD with a 250 GB hard drive.  I used Apricorn upgrade kit to clone the drive, which, in hindsight, may have been a mistake.  I noticed that since installing the new drive, partition RECOVERY (D:\) does not seem to be used at all.  None of the files or directories of the partition have been affected since the day the hard drive has been installed.  Windows indicates that the restore points have been created with success since that time; I guess they are created on the primary partition (C:\).  The D: partition is 30 GB, 15 GB free.  It seems to me that with the current state of things, I have 15-30 GB of hard disk space lost for this partition.  Is it possible for me to get Windows to start correctly using this partition again?  If not, can I safely to reduce its size or eliminate it?  I guess I could store all my data and use the factory restore CD, but I want to save this as a last option resort, because it would be tedious to reinstall also all other software I have installed on this computer.  If someone could point me to a solution or even help me to understand what is happening, I would really appreciate it.

  Thank you.

  Inspiron E1505

  Windows Vista Home Premium (32 bit)

  HDD Hitachi

  
  

• Restore the partition from the Satellite Pro A200 recovery

  Hello

  I accidentally deleted the 5 GB recovery partition on my Satellite Pro A200. I have since recovered (and the data inside) and tried to create my discs of recovery using the "Recovery Disc Creator', but it is to say that it cannot find the recovery partition :(

  I tried fishing by the ini files for recovery disc creator find where he seeks the score, but could not find anything...

  One thing I noticed is that now it is recovered, it appears as a NTFS fs (I think that before it was an unknown FS type?) and volume label "HDDRECOVERY".

  Any ideas on how I can either:

  (a) wrong recovery tool by using the recovery partition
  (b) to make the score look exactly as it did before I deleted it, so I can use the tool as it is.

  Would really appreciate any help - want to make these recovery disc for my vista ultimate before I go around whacking backtrack top :) and dicking

  your

  Frank

  Hello

  > accidentally deleted the recovery partition of 5 GB on my Satellite Pro A200. Since I got (and the data inside)
  I wonder how you restored the deleted partition. Perhaps the recovery settings partition are not the same that before and, therefore, the "Recovery Disc Creator' doesn t work properly.

  Unfortunately, I think you will not be able to fool the recovery tool, if the recovery partition cannot be found.
  You can rename only the partition NTFS FS. This can be done in the disk management console.
  But I don t think this will solve this problem.

  It seems that you have to reinstall the whole OS using the CD of restoration of Toshiba or the original CD of Microsoft Vista

  Good bye

• Help restore the backup catalog

  Hello

  PSE made a mess on the dates of my video clips in the Organizer (who is the subject of another thread). Before you perform a full restore of my backup months old, I want to restore ONLY the catalog it (not the image files) and do coexist with my current messed up catalog. This way I can see if the problem is in the database or in files of video clips.

  I would like to know what files I have to leave my set to my catalog restored backup to work. To prepare for this post, I looked at help | Info by the system to search for the location of the folder that contains the current catalog. Inside this folder there are some subfolers and some files as follows:

  Subfolders:

  breezeData

  CAXMPFiles

  Style

  SyncDB

  Files:

  backupCt.dat

  Catalog.pse8db

  collstatus.dat

  Thumb.5.cache

  Watch.2.cache

  ((1) which files I have to restore and 2) where should I place them so that the restored catalog works properly?

  Because the restored catalog will have the same name as my current, how can I open it in the Organizer without deleting the current?

  It seems that the catalog file is not the name of the catalog itself, as it was a few versions ago. For example, my catalogue is called "My catalog", but the database file is named "catalog.pse8db".

  Remember I want to ONLY restore the catalog database; not the actual image files.

  Thank you for your help

  The entire folder containing the "catalog.pse8db" represents the appropriate catalog.  The name of the folder gives the name of the catalog. You can restore this folder anywhere you want, but it can be convenient to restore in the same parent folder containing your current catalog file (help > System Info to find this place).

  A shortcut that is convenient to open any catalog is double-click on "catalog.pse8db" of Windows Explorer.

  If you are synchronizing with Photoshop.com, remember to turn off sync from the opening of the restored catalog.  Otherwise confusion might ensue.

• Satellite C660 - BIOS Update Failed, need help restore the BIOS. BAK file

  Everything by updating the system BIOS froze in step 7 to replace the code of the BIOS, needless to say that the laptop does not start because the BIOS is now corrupted.

  I have the BIOS. BAK but need advice on how to restore the BIOS. I copied the BIOS. BAK on a key usb and it connected to the laptop computer and then powered on the system (now I tried the F, F2 key together). I can see the usb key will Flash initially but is not, clearly, progressing with the restoration.

  I hope someone might be able to advise the use of the BIOS. BAK file to restore the BIOS.

  Unfortunately I cannot help you with this but check it please this interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

• Boot Camp install fails: cannot create the partition

  512SSD i7 MacBook Pro late 2013

  Boot Camp Assistant 6.0

  O/S 10.11.2

  true (paid for!) Windows 10 home

  Create USB boot exactly according to the instructions of the Boot Camp Assistant (time consuming)

  Re-partition Mac SSD in Colombia-British Deputy with 60 GB for windows partition

  Restart the system and boot of Windows Setup

  Enter the key to victory, everything works fine

  When you choose which partition to install windows, select 60 GB

  Installer of Win said partition is not formatted correctly, so I use the formatting tool in the installer

  Formatting tool seems to work but removes the volume name: it was Boot Camp and becomes Untitled

  60 GB re partition - select an installer says "failed to create the partition" or something similar

  Installer refuses to go forward and the only way out is to leave the Setup program

  Mac to Mac o/s boots

  Tried a couple of times and always the same result.

  Someone has an idea what I am doing wrong? I'm just following the instructions of the Boot Camp Assistant...

  This is the case, if you have any other than the USB storage and storage internal connected.

• Help restore the temporary files

  I just restored my Dell Dimension 4700 to factory settings, but before I did, I used the file and Transfer Wizard to transfer all my files on an external hard drive up, but I don't know how to restore them now that I am up and running again.  They seem to be in Temp folders.  Any help ASAP would be certainly appreciated.

  External hard drive LaCie and Genie Backup Software that comes with it is what the Temp files are on (at least this is what I think it is).  The files settings and Transfer Wizard helped me transfer my files before I restored my system to factory settings, but I do not see how to restore now.  Help

  Brooklyn Babe

  Babe from Brooklyn,
  All you need to do is to run the transfer Assistant again, and when it starts it will ask if it's the new pc or old.  Say that it's new and then he will be asked where the files are located and you direct them to the reader.  NOW, I did this on a pc once and had a little problem with the service pack level.  The SP should be the same as on the old machine.  for example, I saved on SP2, and I tried to restore the SP3 and it wouldn't work.  I had to remove the SP3 and then restore. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

• help restore the iphone 5 c

  restarted laptop running windows 7 keeps ultimate software extraction goes to restore the iphone then error 3014 I tried everything and I really don't have it to do, I changed the screen on the iphone, and now I have to wait 24 million minutes to put my code pass in n it doesn't let me do

  Hello

  Please contact Microsoft Community.

  As it comes to restore the iPhone, I suggest you to contact Apple to the forum and check if it helps.

  Please refer to:

  https://discussions.Apple.com/welcome

  Hope this information is useful.

  Kind regards
  Anusha

• Restore the partition table data

  Hello
  
  
  DB 10.2.0.1
  
  I have a dump file in which exported the data from a table to a database. This table is based partioned. I have imported into the database B. I have truncated or tried successively to the partition of the table in database B now I want to import the data from the export dump file in the same table. I don't want to import the data again for all partitions. I want to just import only truncated how data I could do?
  
  Thank you

  Hello

  Even I did as you say, but we give below error.

  In fact, it is not an error message:

  Import completed successfully without warnings.

  You have SQL code contained in the "dump":

  CREATE TABLE 'TRADING_TEST' ("BRAND_DESCRIPTION' VARCHAR2 (120)...)

  For example, you may notice that importation will try to recreate the Table of TRADING_TEST with all its partitions. Of course, it will generate an error and you will not be able to import the data in the Partition. Unless you have just TRUNCATE and you use the parameter IGNORE = Y.

  So, if you TRUNCATE the Partition you do not have to recreate.

  If you DROP the Partition, it is best to recreate first (ALTER TABLE ADD PARTITION...).

  Then import you the datas like that (I just add IGNORE and LOG settings):

  imp system/password file=C:\exportTable32\table.dmp FROMUSER=dev touser=system tables=(TRADING_TEST:A15) ignore=y log=C:\exportTable32\table.log
  

  However, I hope that it is just for test purpose, because it is not recommended to create the user Tables in the SYSTEM.

  Hope this helps.
  Best regards
  Jean Valentine