Buysing external antenna is required for AIR-AP1230A & B?

Similar Questions

• AIR-Antenna compatibility with ap AIR-CAP1602E ANT5160V-R

  HI, I need 2 external antenna 5 GHz for AIR-CAP1602E.

  In the Cisco documentation, I have not found that "this antenna is designed to be used with Cisco Aironet access points and bridges but can be used with any device radio of Cisco Aironet 5 GHz using a reverse polarity (RP - TNC) connector."

  And in stores I found 'designed for Aironet 1100, 1130AG, 1250 modular Unified Access Point Platform, 1252AG, 1252AG Point of independent access, Unified Access Point 1252AG, 1252, 1252G Unified Access Point, 1310 Outdoor Bridge/Access Point'

  It is the job or not?

  Only works in 5.0 Ghz and disable your 2.4 Ghz radio.

  You also have THREE antennas.

• Where is it save to save a photo library? Requirements for the external hard drive

  Apple support documents have been somewhat vague about the requirements for a player welcome photo library.

  It is not yet clear if Photos can run a file system, is not HFS +: this restriction is mentioned only for the system of libraries of Photos, which syncs with iCloud (https://help.apple.com/photos/mac/1.0/?lang=en#/pht211de786)

  By default, your system library is stored in the folder of images on your Mac, but you can move it to another location on your Mac, or store it on an external storage device. However, to use iCloud services, the external storage device must be formatted using the format Mac OS extended (journaled), also known as HFS +.

  But it is experiences during the migration of libraries, that Photos cannot migrate libraries iPhoto or Aperture libraries to a photo library, if is not filesystem HFS +.  It will try to create the library migrated on the system drive instead (probably because he can't create links hard disk) and generally not running out of storage.

  Apple less did today, confirmed that he is not sure store of the photo library in a synchronized cloud storage, see: update to iPhoto to Photos for OS X - Apple support

  If you store your photo library in a place that is part of a Cloud Computing service (for example, Dropbox, box or Google Drive), your library might be damaged by the synchronization process. So, you might lose photos.

  To see your photos on all your devices, you can use iCloud photo library. To back up your library, you can use Time Machine.

  I still have not found supporting documentation, that clearly indicates if a library of Photos can be stored on a NAS. If it cannot be used as a library of Photos of system.  For the opening of libraries or libraries of iPhoto, the recommendation of Apple was clear: use locally mounted volumes extended, Mac OS X for your Aperture library

  Does anyone found a similar document for the Photos?

  Is it possible to store original files referenced on iCloud by car or in a box?

• Where can I find external antennas for the extreme UFO from the airport

  Where can I find an external antenna for my extreme model of the A1034 (UFO) airport?

  You can check with the support of Quickertek , since they used to provide an option for the A1034 AirPort Extreme antenna upgrade. Maybe they might have even a few shares left, even if the product is not on their current site.

  http://www.QuickerTek.com/

  If you have a Radio Shack or Fry near your House, take the AirPort Extreme to see if you can find an antenna with a connector that will come into contact with the connector on the AirPort Extreme. Any small, simple antenna will do, the trick is to find one with a connector that fits the AirPort Extreme.

• Need for an external antenna for desktop - what to buy

  My mom just got a new HP desktop.  She lives next door to my sister who has/wireless router.  In the configuration of his computer, the photo shows an external antenna cable that plugs in the back of the tower.  However, in the store, they have a variety of USB things that sound like they do the same work.  His house is about 500 feet of my sisters.  What is the best, most economical solution.  Be precise because clearly I'm not tech savvy.

  I think you're at the limit of the standard Wi - Fi if you want to connect to a PC that is inside a House to a wireless router that is in another House of 500 feet away.

  If there is a line-of-view between the two houses, then you can consider adding a pair of outdoor access points.  I have a set of an older version of these products, and they work very well for me:

  http://Meraki.com/products_services/hardware/outdoor/

  Best regards / Jim B

• Satellite M50: How change it to fix the external antenna for WLan card

  I want to change my M50, so I can join the onboard wireless card external antenna.

  Anyone know of any modding guides?

  Hello

  What do you do exactly?
  What is name of your Satellite M50 - xxx?

  Usually if the notebook is Wlan ready but there is no Wlan installed if it is possible to use a minPCI wireless network card.
  So if you want to install the Wlan card and attach it to the antenna, you must connect the cables.
  A white cable normally goes to the HAND and a black to the auxiliary voltage

• Pavilion a6700y: connection for external antenna

  I managed to disconnect the external antenna adapter cable wireless when cleaning the computer.

  It seems that there may be two possible locations to reconnect the wire (it looks like a big boost on the connector at the end of the antenna) to the adapter.

  Any information would be appreciated.

  Thank you!

  Hello:

  There's probably a hand and an outlet to the.

  Here is a picture of the map on your PC support page.

  Watch orientation and copy what you see here, would be the only suggestion I can offer, or closer to it and terminals can be labeled on the circuit board.

  With a single antenna, you want to connect to the main terminal.

  

• Cannot use PS CC get this message on macbook air you run an operating system that Photoshop can't stand anymore. See the system requirements for a complete list of the supported platforms.

  get this message

  You are running an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms.

  Hello

  Please see the system requirements for photoshop: -.

  Configuration of Photoshop

• The Pavilion Elite HPE475 need an external antenna to a wireless connection?

  I just bought this machine and have had problems with a poor quality since the wireless signal. HP technical team came up with all sorts of different explanations, and I even had to send for the "repair" because one of them think that the wireless card was defective. The last time it's because he needs an antenna.

  Can someone confirm if this machine wireless card requires an antenna to be connected to the two screws Golden at the back of the computer? What is the answer, or just another diversion?

  I was not sent an antenna with the computer, it may be a mistake the part of HP. I can connect to the internet, but usually get that two bars on the signal, while my old computer has always had five bars, as do other computers on the network. The connection keeps dropping out and is extremely slow to load at times.

  Any help would be appreciated.

  Hello

  I suggest that you take a look at what came in the box.

  The low-profile wireless network card should have with an antenna and two cables with connectors from red and blue to differentiate the connection to the wireless card.

  The service center may be assuming that you already know that... All the wireless cards that come with desktop computers have a connected external antenna with cable to the wireless card.

  This image is an example. Some cards equipped with antennas that screw directly on the gold screws. Most 802.11 b/g/n card look like this.

  Please report anything that is on the label with bar code on the back of your PC, except the serial number. The HPE475 is not a complete description of a PC.

  Best regards
  ERICO

• The requirements for the universal Clipboard not correct?

  Hello

  The requirements for the universal Clipboard for iMac is not correct. It should work on my iMac mid 2011, but it doesn't. It works on my Macbook Air mid-2013, so I know it works in general.

  You do not discuss Apple in these forums, we are all users like you.

  If you have any questions please ask, however if you have any comments for Apple please leave at www.apple.com/feedback.

• Card required for control special measures

  Hello!

  We have some NOR-DAQ cards (PCI-6221, 6251 and 6036E) but none of them seem to be capable of the following measure.

  There is a digital pulse train that must be received (practically with a meter). To measure the VOLTAGE to a channel of AI when a pulse is received. The frequency of the pulses can be 1 KHz, therefore generating events at each pulse for the PC is not viable. He must also know where the pulse OCCURRED (something as the card should have its own clock and should be able to put next to the measured voltage value).

  In addition, the map should give a sign of output (pulse change or line) of 1. the number of pulses reached a given amount or 2. the voltage is lower or exceeds a value given to a channel to HAVE. If an automatic output is not available at least we have an event to the PC.

  Will there be any card to fix this? In fact the card must have at least two meters since we have two trains of digital pulses, but only is active to a degree. Thank you very much for your suggestions!

  Could you clarify it please ", we have two trains of digital pulses, but alone is.
  Active to a degree.  You check in for a number of pulses on several lines?  You have more than one channel of Analog Input?

  Without taking into account the requirement for the 2nd train of digital pulses for the moment, to my understanding of the application the 6251 could do you need:

  1. the signal of AI must be connected to the 6251, since it is the only one of the three that supports analog trigger.

  You need to configure an analog reference trigger to allow comparison shipped.  You can use the line to HAVE it if you are sampling just one channel (or an APFI line if you're sampling from multiple channels).  Export event of analog comparison will tell you when the signal is outside a certain threshold (the graph presents 'Entering the window' but you can select "Exit" instead):

  

  2. connect the Digital pulse train to one of the PFI lines on the 6251.  It will be the sample for your task clock to HAVE.

  4. use the same PFI line as a source for a meter (pulse) output task.  Set the initial delay so that when the desired number of pulses have been counted you will produce a pulse on the output of the counter.

  5. you now have a line telling you what N pulses have been reached (from step 4) and a line telling you where I is outside a window (in step 1).

  6. If you want to timestamp pulses using the edge of the Office counter, you must use the counter 2nd as a county of edge stamped with the external pulse as your sample clock signal.  This will give you a very precise timestamp of your external impulses (compared to the beginning of the task).

  If you need for impulses of timestamp on multiple lines, you can look in the task configuration of change detection of DI on the 6251 and using change detection event as the sample for the task of counter clock.  You must implement logic in SW to determine which line has generated the actual event.

  You have also 4 other counters to play with on your other DAQ hardware two, so depending on what you want to do, you should have a little flexibility.

  Best regards

• external antenna

  I have a HP 5188-7748 external omni antenna.  I have no idea where it comes but it is still in the original bag.  I'm guessing that I never needed her but don't know what it came with.  Can someone let me know what happens to?

  DJFord

  This is an external antenna that connects to a network card.

  Here is your answer: http://www.amazon.com/Hp-5188-7748-Miscellaneous-External-directional/dp/B0045JQWEK

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Can WRT54g2 use an external antenna

  I don't see a connection on my WRT54G2 wireless router. Is it possible to attach an antenna external hi-gain to this router? I did not take part to seek an internal connector.

  There is no connector for an external antenna.

• CAN I turn stop wireless to router but always send signals to an external antenna via the port?

  Can I stop/start of my Wired main WRT54G wireless and always send the signal through a WAP browser & directional external antenna plugged into the hub?

  How to allow only my own devices to use my bandwidth?

  Using WPA password on WRT hub.

  Drive Blu - Ray and AT & T Microcell Tower allow other titles-WPA2...?

  Can I block the antenna attached to the main hub of sought but allow the port to send signals at access point?

  Shields of aluminum foil over the main router antenna would cease its output signal? (if I remove them to allow the occasional portable navigation)

  If you want, you can disable the feature on your primary router WRT54G wireless and use WAP to send the wireless signal.

  Open the router configuration page and go to the Wireless tab, change the mode of network to people with reduced mobility. Save the settings.

  If your wireless network is secure only your wireless computer can connect to the wireless network and use the bandwidth. So, make sure your wireless network secure.

  Consult the manual for your Bluray and AT & T Tower and see if they take in charge WPA2.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses