By comparing the day of the Sysdate

Similar Questions

• Compare the date of the day against a date entered

  Hello

  In my form, I need for the user to enter a 'date needed '. So I need to compare the need of today, and if it is less than 15 days away, I need to display a message: we need more 15 days to respond to your command. »

  I found some scripts on the Forum, but none is exactly what I need and I can't find how to modify them for this specific problem. Any help is appreciated.

  Thank you

  MDawn

  OK, you just need to add a script to the output of the dateNeeded field event.

  If (date2num ($.formattedValue, "MM/DD/YYYY") lt date() + 15) then

  $host.messageBox ("at least 15 days in the future be as date", "entered an incorrect date", 0, 0)

  endif

• No need to advise - compare the date in *.sql with sysdate.

  Hi guys,.
  
  Need some help here.
  
  Someone has a script that will compare the date specified with the current sysdate. If previously, he will order that SQL * PLUS to leave immediately.
  The audit will be essentially in a script *.Sql. Whenever we run the script, @c:\script.sql, it will be first of all to compare the dates and decide whether to proceed with the rest of the codes (dml) below the date checker in the same script.sql
  
  Thank you

  I would like to combine the solutions of bencol and alberto:

  whenever sqlerror exit
  
  DECLARE
     v_date   DATE := TO_DATE('', 'YYYYMMDD');
  BEGIN
     IF v_date >= TRUNC(SYSDATE) -- or perhaps:  v_date>= sysdate
     THEN
       null;
     ELSE
       raise_application_error(-20000,'Date is before SYSDATE!');
     END IF;
  END;
  /
  
  whenever sqlerror continue
  
  -- rest of your script
  ...
  

  (not tested)

  Published by: hm on 08.05.2012 02:51

• Compare the result of a query with a number and return a message

  Hello
  I have the following query in oracle 9i:
  
  SELECT COUNT (*)
  OF hourly_files
  WHERE date_received = TO_DATE ((SELECT TO_CHAR (SYSDATE - INTERVAL '1' DAY, 'DDMMYYYY')
  (THE DOUBLE), 'DDMMYYYY');
  
  This will produce a number of lines required
  
  I need to compare the number of output with another number hardcoded (threshold) and print an appropriate example message
  
  If the result of the query above is 18000 and the number of threshold is fixed at 20000, then output a meesage:
  
  Number of files received less than 2000
  
  Any help will be very appreciated!
  
  Thank you.

  SQL> ed
  Wrote file afiedt.buf
  
    1  SELECT CASE WHEN COUNT(*) >5 THEN 'Number is > than 5'
    2              WHEN COUNT(*) <1 THEN 'Its less than 1'
    3  ELSE 'Its in between'
    4  END
    5  FROM emp
    6* WHERE deptno=20
  SQL> /
  
  CASEWHENCOUNT(*)>5
  ------------------
  Its in between
  
  SQL> SELECT COUNT(*) FROM emp
    2  WHERE deptno=10;
  
    COUNT(*)
  ----------
           3
  

• What formula would I use to add all the other ranks in my spreadsheet. I want to compare the fees and expenses of 2015 since they are incurred for 2016

  On the same worksheet, I want a spreadsheet to compare spending 2015 totals by month in several categories to 2016 expenses when they occur. What is the best way to implement this worksheet? It is essentially a budget, but wants to see how the category spending increase or decrease all the months for 2016.

  Thanks for any help.

  Hi Bruddah,

  I would like to start by rearranging your table so that the amounts from here to 2015 and 2016 switch not in the column, as implied in your question.

  Vocabulary of the numbers:

  worksheet not sentence numbers

  Worksheet: A spreadsheet. Usually abbreviated to 'Document '.

  Leaf: a blank canvas on which are placed the tables and other objects. A Document has at least one and maybe more than one.

  Table: an object consisting of one or more cells, arranged in rows and columns.

  Take a look at the personal Budget template (file > new form model...), specifically the summary in the table of categories.

  It uses the formula: = SUMIF (Transactions::Category, A2, Amount)

  Since you want to compare the volumes in several CATEGORIES at the specific two-year MONTH, you will need SUMIFS, using three test values, pairs of condition.

  Syntax: = SUMIFS (sum of the values,test values,condition,test values,condition,test values,condition)

  I would like to know if it is enough information. If this isn't the case, I'll be later in the day to enter more specific details. In the meantime, a screenshot of your table and the lines of (at least) your transactions table header would be probably useful.

  Kind regards

  Barry

• To get the sysdate in a default input field text msg...

  Hi all...
  
  My requirement is simple but a bit complicated...
  
  I need to enter the SYSDATE as a default value in the field of DATE data type...
  
  I managed to get by writing the following code in AMimpl...
  
  OADBTransaction txn = (OADBTransaction) getOADBTransaction (); +
  oracle.jbo.domain.Date currentDate = txn.getCurrentUserDate (); +
  row.setAttribute("ClosingDate",currentDate); +
  
  
  his taking the value (10:17:09.0 2013-02-16) in this format and is saved in the back-end as the same...
  
  When I run the SEARCH page
  and
  Use this CURRENTDATE as search criteria...
  It evaluates (12:00:00.0 2013-02-16)
  
  So I am unable to get the result I want
  
  If I select a specific date
  could someone help me in this particular CASE...
  
  Regarding
  CE1

  Hello
  You can use the stuff (your date of entry)
  and compare with trunc (date of the table).

  Otherwise, you will need to use timestamp instead of the date column for the search field where the user can
  Enter the date and time stamp.

  Thank you

  With respect,
  Kali.
  OSSi.

• By comparing the fields on a JSPX

  OK, this should not be difficult, but I can't find anything on it.
  
  I want to do is compare two fields, in this case the dates on a form.
  
  Now, the tricky part seems to get values that are CURRENTLY in the form of type.
  
  I need a way to see what the user has typed currently on the form. Why is it so difficult? (or apparently?)
  
  He compares the value that was stored in the line, but this will only confuse the user:
  
  ' Public Sub StartDate_validator (FacesContext facesContext, UIComponent uIComponent object pObject)
  {
  RichInputDate vReturnDateComponent = uIComponent.findComponent ("id1") (RichInputDate);
  VReturnDate = vReturnDateComponent.getValue () (Date);
  Day vStartDate = pObject of (Date);
  System.out.println ("to start date" + vReturnDate.compareTo (vStartDate));
  
  If (vReturnDate.compareTo (vStartDate) < 0)
  {
  throw new ValidatorException (new FacesMessage (FacesMessage.SEVERITY_ERROR, "invalid leave", null));
  }
  }
  
  ' Public Sub ReturnDate_validator (FacesContext facesContext, UIComponent uIComponent object pObject)
  {
  RichInputDate vStartDateComponent = uIComponent.findComponent ("id2") (RichInputDate);
  VStartDate = vStartDateComponent.getValue () (Date);
  Day vReturnDate = pObject of (Date);
  System.out.println ("on the date of return" + vReturnDate.compareTo (vStartDate));
  
  If (vReturnDate.compareTo (vStartDate) < 0)
  {
  throw new ValidatorException (new FacesMessage (FacesMessage.SEVERITY_ERROR, "invalid return", null));
  }
  
  }
  
  < af:panelGroupLayout id = "pghb" layout = "vertical" >
  < af:inputDate value = "#{bindings." AutoSubmit DepartDate.inputValue}' = 'true '.
  label = "#{bindings." DepartDate.hints.label}.
  required = "#{bindings." DepartDate.hints.mandatory}.
  shortDesc = "#{bindings." DepartDate.hints.tooltip}"id ="id2 ".
  immediate = "true".
  Validator = "#{backingBeanScope.UpdateTABean.StartDate_validator}" >
  < f: validator binding = "#{bindings." DepartDate.validator} "/ >"
  
  <!-->
  < af:convertDateTime pattern = "#{bindings." DepartDate.format} "/ >"
  < / af:inputDate >
  < af:inputDate value = "#{bindings." AutoSubmit ReturnDate.inputValue}' = 'true '.
  label = "#{bindings." ReturnDate.hints.label}.
  required = "#{bindings." ReturnDate.hints.mandatory}.
  shortDesc = "#{bindings." ReturnDate.hints.tooltip}"id ="id1"immediate ="true ".
  Validator = "#{backingBeanScope.UpdateTABean.ReturnDate_validator}" >
  < f: validator binding = "#{bindings." ReturnDate.validator} "/ >"
  < af:convertDateTime pattern = "#{bindings." ReturnDate.format} "/ >"
  < / af:inputDate >
  < / af:panelGroupLayout >
  
  Thank you
  
  Jet

  Hello

  Try to set up each component of entry as one partialTrigger on the other. I think it should work.

  It has to do with the life cycle JSF/ADF. It becomes a bit complicated because of the autoSubmits and the immediate you have on components. Learn more about the cycle of life and its variants here: http://docs.oracle.com/cd/E15523_01/web.1111/b31973/af_lifecycle.htm

• How to compare the time slices in 15 minutes?

  Using Flash 8 Pro AS2
  
  Have an animation to play once at the first visit to the site, regardless of the number of pages visited within the site. Then start over when to return to site.
  
  I thought that SharedObject would work for this. I managed to do it run at the same time to visit the site and the value of the shared object. Problem is that the animation NEVER play again because the shared object is never removed.
  
  Is there a way to put so it was like a session then that would solve this easy. I don't know how to do if there is a way.
  
  So I decided to make the swf file to check the page reload or if come back once again, site 15 minutes has elapsed. If so, update the time in being shared right now and the animation playback.
  
  Problem is that I have NO idea how compare the time set in the shared object at the moment to check whether or not the 15 minutes has passed.
  
  I tried different things, but the comparison, at the end of the hour, goes into the negative numbers. I am here minutes passing between saved time and the current time. Nothing else for a few minutes.
  
  I'm not a mathematical genius or understand all the stuff that I see out there in the tutorials and code examples, when it comes to the date and the time of calculation.
  
  I need to be. Delete the shared object to the closure or the site navigation browser.
  OR
  Check if 15 minutes has passed then at day time in the shared object and read the animation
  
  I'm just stuck in the calculation of time to determine whether or not the 15 minutes passed.
  
  What happens if they return to the site of the days or even weeks? My minutes of follow-up test has no meaning when entering hours and days or even weeks or months. Of course, my approach does NOT work.
  
  Any help would be great. Don't forget to Flash 8 pro and AS2 NOT AS3 or flash 9.
  
  
  Thank you

  I don't know how you look at the time, but if you create a DATE object:

  var today: Date = new Date(); It's actually an object of date and time.

  So, if you compare this date and time with an earlier date object and the object of time by using the Date method getTime() as follows

  Now.getTime () - previousDate.getTime () = the number of milliseconds that have elapsed between the "previousDate' and 'now '. If the difference is > 15 * 60 * 1000, 15 minutes.

• By comparing the numbers on MAC worksheet cell text

  How to compare the content of text in a cell in a column with the text content of each cell in another column to check for duplication. After checking the first cell, I won't move to the next and repeat the operation for each cell in the first column, ultimately comparing each cell in the first column with each in the second

  A simple way to do this would be something like this:

  

  The formula for C2, filled to the bottom of the column, is:

  = IF (COUNTIF (A, B) ", TRUE," "")

  The formula in D2, filled to the bottom is:

  = IF (COUNTIF(B,A), TRUE,"" ")

  This requires that you compare the contents of a cell in column B with all the contents of each cell in A and vice versa.

  If you want to see if the contents of a cell in column B is contained within the contents of the cells, etc., then a more complicated approach would be necessary.

  SG

• How to compare the 2 versions of the same document in Pages?

  How to compare the 2 versions of the same document on Pages?

  There is no OS X Visual tool which can open two Pages document and show the differences between them - other than the human eye.

  What information are you interested in identify as different between the two documents? What specific version of Pages?

• In comparing the two last samples read in

  Hey guys,.

  before the start of my program to test a sample, to check whether its current temperature stable

  So, I read the information of my sample temperature very low frequency (once every 5 seconds) and basically I want to compare the last two samples I have read, and if they are the same allow the next part of the program to start.

  I thought that this could involve using the Labview collector function, but I can't see how I would implement it.

  Any help is very appreciated,

  Sam.

  use a registry node or shift of feedback.

  Write the value to the entry of feedback node and compare to the output

• Compare the voltage

  Hello.

  I created a VI in order to compare the measure. I start with a simple button.

  I want to replace the button with a myDAQ data. But read the data on sent myDAQ of data streams, and I need only one value? How to extract a value from the stream?

  Pascal

  Hi Pascal, see the attached VI (old version, but should open).

  Place your daq assistant as shown and see the results.

  Hope this is what you are looking for.

  Best regards, W

  P.S. I could not resist to show an alternative to the structure of your business

• How do you compare the data collected continuously?

  So, I'm stuck on the basic architecture, therefore, hoping that you can push took me.

  What I have is a VI that measures the tensions permanently, then, I have a flow of power from DAQ hardware data points.  What I WANT is to act on the data points of tension, only, which are larger than the previous points.  For example, I want to act on the first data point, since it will be the most important, since there is nothing to compare to, then I want to compare the points of data subsequent to the first, until there is a greater than the first data point.  Then, I want to compare tensions the NEW value more and so on, etc. and act only on the NEW larger value.

  Consider this list of data points and corresponding outcomes:

  2 LAW

  4 LAW

  3. DO NOTHING

  3. DO NOTHING

  4-DO NOTHING

  5 LAW

  4-DO NOTHING

  5-DO NOTHING

  4-DO NOTHING

  3. DO NOTHING

  6 LAW

  I've been watch combinations of them for WHILE loops and shift registers and the tables, but the table would get so huge so fast and the MIN/MAX value of the TABLE palette function would get pretty slow and I don't need to evaluate all previous data.  I just need to be able to identify the highest value and then compare it to the following values until there is a NEW larger value.  It's a bit like how the warriors would fight several opponents until they lost and then, there's a new champion, and all subsequent warriors are compared to the new champion and so on and so forth.

  You have any suggestions on how to achieve this?  I'm puzzled.

  Thank you

  Dave

  Yes, either case will work, I put it in the structure case just to show that you need to put in there if you want to use.

• Compare the table and out of the common elements

  Hello

  Can you help me to compare the two tables in the attached file in VI and out the elements common to the two tables?

  Thank you

  hiNi

  There is no wire table through the False State in the structure of your business.  Use the default value if unwired is selected for this tunnel. the default value for this tunnel is an array of empty strings.  Run the wire straight through, and Bob's your father's brother.

  

• by comparing the average centroid location to the location of the center of gravity measured

  I'm using labview 2015 to design a laser alignment system, using a contoller ag - uc2 and an optical mount piezo driven two webcams. The establishment, is that the webcams are positioned behind the mirrors, which are somewhat permeable, so the webcam will get a shot where the laser beam is pointed. The laser must be aligned manually first, and after that it is satisfied with the alignment, this program will be run once to run in the background. control the position of the laser a few times per minute to correct the thermal drift. After it is first of all, I would like the program to take maybe 10-15 images, to find a location to center of medium severity on each of the mirrors, then switching to compare new images of this center of gravity of the model. My problem is that I can't imagine a way to get a picture of model and have that info Reports to the next iteration of the while loop to the overall program be carried out. I have tried using the structures of the case, which, I imagine, will eventually be the solution, but it did not work as expected. I put the case structure to run based on the value of the indicator loop iteration of the main loop, and I got a while loop in there with registries to raise the center of gravity of this loop and store this information for the next loop to shift. I can see after running the program why my implementation does not work, but I don't know how I can design something that will have an average of several images. I think I should use learn and compare the model, but I don't know how I can convert a cluster (centroid) type of data appropriate for the model comparistion live if you have any suggestions for my existing code or want to offer a different approach, I appreciate it. Also let me know if you need any other screws included.

  In the past, when I had to switch between two 'modes', if you do, I used two consecutive loops while, one for the first mode and one for the second, or I would put Boolean register to indicate that, two modes, the loop was offset.  If you start in a mode, and then more later switch to another once and only once, then you can use a node 'OR' like a lock to power the old way, so the first true feed you of keeps it true until the next time that you run the VI and it returns false.

  I would also add that I looked your VI and the method that you use on average 10 images, while innovating, is usually not a great plan.  Instead of having 10 shift registers build an array of fixed size, just have a table in a shift register, add each new measure at the end and the VI means in the range of mathematics/statistics to calculate the average.

• compare the two array element and ignore the undesirable element of the array

  Hello

  Here I attached the vi. In this vi I compare table with ideal picture of A to z. normally in an entry, that we get a data with noise, as is show in this vi normally I just need to compare the value has Cwith c D with D with A & B with B, and so on. now the problem is I have to compare ideal picture with input .and string array if the input string is not in series from A to Z the whole comparion is .i false hope you understand my problem and give some suggestion thank you

  Please take a look at this modified version of your code and I would like to know if that's what you are trying to achieve.

  Please, ask questions and make sure you are comfortable and understand what I coded.