By dragging the scene newbie question

Similar Questions

• How to drag the scene

  How I can begin to slide and stop, drag scene?

  You can only drag and drop an object targetable.  You will need to move everything in the scene inside a common object, and then drag this object autour

• Drag the Transition Fade question

  Hello

  I'm having a strange slide transition problem.

  Basically, I put slide 18 in my with a fade transition project.

  Slide 17-> Fade Transition-> Slide 18

  When I click on slide 17 and then select "Preview"--> "This Slide" it looks great. The transition between the 17 and 18 is perfect.

  However, when I select 'Preview'-> 'Project' and make the transition between slides 17/18, it shows a very strange fade. I suspended the fade and took a screenshot. See the image attached below.

  It almost seems as if he has stacked 3 arbitrary slides on top of the other (slides 5, 11 and 12) and shows them curiously in the transition. I tried to copy and paste the project into a new project. I tried to publish the project as a SWF file (to see if it publishes this way). I have tried to rearrange the position of the slide, save, then edit and save. Nothing works.

  Does anyone have ideas on this? Thank you!

  

  Okay, I think I found a solution.

  I tried to copy the slide 5, for example, pasted into another window of project and then delete the original slide in the initial project. Then I copied the slide I pasted into another window of project and pasted in the original project. It did not work.

  My original approach was to address the slides which seemed to 'stack' on the faded transition. But I am not trying to work with the slide itself, where the transition was actually applied. That's the key.

  I have reproduced the slide that contained the transition, hiding the original, and then when the realistic preview and published SWF file, the behavior of a normal transition faded returned.

  I hope this helps someone else who has run or will run into something similar!

• To loop through the table (newbie question)

  Hello

  I've read and read but can´t seem to do what I want to do.

  I do a lot of forms in Livecycle, but can´t seem to understand even the easiest loop.

  Let's say I have a table with two columns and ten rows. TextFields in column A is called Cell1 and Cell2 B column.

  I want to look through all the lines for that:

  If (Cell1.rawValue! == null)

  Cell2.fontcolor = "255,0,0";

  on the other

  Cell2.fontcolor = "0,0,0";

  If anyone can help me with this, I would be very happy. Mayvbe I can begin to understand this, because it seems that I m missing certain functions very practices.

  / Anders

  Sweden

  Assuming that all your lines are named 'Row ':

  for (var a=0;a
  Kyle
  		   

• On the positioning of the pallets newbie question...

  By default, the shade and layers palettes are opened and located on the right side of the screen... and all playing with the program, I seem to have "unlodged" these windows so that the open document now goes UNDER the pallets. And it's very annoying. The pallets are now floating above the document, even if I get back them in their original space.

  How to re-create the gutter which initially held these palettes?

  You can reset the workspace to the defauly by going to the maneuver of the workspace (the button at the top right of the interface Ps - he said Essentials or Web for example), click on it - it wil, menu drop-down and select Reset the workspace.

• I get about one second from the previous movie when the scene selection in the menu of the DVD

  I have PE 12 for mac and have a 21.5 "iMac with 4 GB RAM and 1 TB hard drive.  I asked questions on here before all of a DV footage.

  I have a delay of 1 hour, 20 minutes and used markers to scene to go to the cinema in the timeline panel.  There are 11 movies in the video.  Markers are at the beginning of the scene in question.  On some of the later scenes, I get about one second from the previous movie before the start of the current movie.  I did thorough tests 12 EP in order get my imported correctly DV film.  I finally decided to use LifeFlix to get the imported records.  When I was testing the creation of DVD, I have not found this second of the previous film in the current issue of the film.  The problem seems to be that less pronounced during playback on my DVD than VLC Player or Apple's DVD player.  I use DVD Widescreen Dolby Preset for the DVD.  I did a DVD earlier using brands of menu with the result being 11 main menus.  I decided to abandon this approach.  Two DVDs have the same second or so of the previous clip before the current movie.

  I tried to stop markers in the DVD to recreate what I had with Pinnacle Studio, but this resulted in a DVD with a 'mistake' at the stage of decision-making case and record a DVD with menus blacks half but for the buttons.  I had added some empty frames between scenes when adding the judgment of brands, such as advised by ATR, but this failed.

  I would like to use markers to stop it again, but the problem of the second or last if a clip is more pressing.  The previous screen is sometimes less than a second and has no picture, just sound.

  Never had this problem with my old program.

  I also had "Unknown error 2131042562" when writing a normal DVD with the project and the checkbox "adjust to the content of the available space." checked.  I also got this when trying to write on a normal DVD - RW disc, to test the DVD for 'Previous film' problem as stated above.

  My burner is a USB 3 Litton Blu - ray burner.  It worked without a problem since I bought it.  I also used TDK DVD that I used for a number of years without any problems at all.  Today I wrote a data DVD without any problem.  I also wrote the content of a DVD folder on the disc, after generating an image using disk utility and it worked successfully, I realized the same DVD using the software 'Burn' successfully.

  Again, I have never had such problems in the display of the videos on DVD before.

  Your help is very appreciated.

  I managed to get a DVD with 5 images of black video between the scenes I wanted.  Video of Black made sure the brands menu worked!  Started it at the beginning of the relevant scenes.  I've never had to do this before in any program.

  Add stop markers did not.  Brands menu would go up to a point half a second or a second before the required stage, as have no black video.  I tried all sorts of things to resolve this, even to copy the project using the project archiver and the opening of the copy, but nothing helped.  I don't really know how ATR has managed to get markers to stop working.  I even added 12 frames of black video between frames with markers of the judgment at the beginning of the black video and the marker of the scene at the end.  It did not work.  I have nothing out.  The program seems to create a folder, but there is no error message and no file at the end.  He writes date folder much faster than normal when using markers of the judgment.  Also do not work 12 images of the video I think.

  I gave up at stop markers.  The normal use of the menus seems OK.  Other programs like Apple Compressor have this type of menu structure.

  Note the use of 5 images of the black video locks marks menu successfully.

• Newbie question: Dimension of the hierarchy doesn't let me drag columns to levels

  Help.
  
  I am installing a new Dimension of the hierarchy in my repository OBIEE. It allows me to create a new dimension, and to set up the levels, but then it doesn't let me drag the columns above. I missed a step somewhere, but I don't know what.
  
  Steps to create a hierarchy of Dimension - >
  Create a dimension object.
  Add a parent level object.
  Add objects of child level.
  Determine the number of items.
  Specify level columns. -C' is where I'm stuck. I can drag columns from the fact, but not the size.
  Create level keys.
  
  B

  You can take the dimension columns from the dimesnion on which you created the hierarchy. You cannot extract columns of two dimensions in a hierarchy...

  Try to rebuild the hierarchy. Right-click on the dimension table and select Create dimension. All the columns in this dimension will be appera in the hierarchy. Then, you can create different levels and can drag columns of fall of hierarchy itself.

  Kind regards
  Sandeep

• A LOT of Newbie Questions blackBerry smartphones. (Must be the easy answer!)

  Good, please excuse my ignorance... guys xD

  I just bought two s BlackBerry Curve 8530 from Sprint. I'm pretty tech savvy, but there are some things about this phone, I can just enter in two or three days I got em:

  Deleting photos: Well, then I'm in my media folder, in the images. I selects a photo and press the BlackBerry button and select Delete. Then he said: it is read-only, and when I remove it, the icon is still there. I tried to turn on/off the device, and it's still there. Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared. I was also able to delete using the "BlackBerry" button and then "delete". It doesn't give me that read this option.

  Saving images: So, for some reason I can't save more photos. I don't know even how I saved the first 12 photos I have taken... but now it won't save any more. What the hell happened? xD I have a 2GB card in my phone... surely these 12 images didn't fill in this card... Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared.

  Buy ringtones: On my old phone LG, I used to buy ringtones RealTone Jukebox... where they had extracted from songs that I could download for a crazyhigh. Where can I buy the real music ringtones for BlackBerry? What I do myself?

  Media moving to my PC?: I went through the music store of Sprint comes with my camera, and two purchased songs. I want to know if I can get these songs out of my BlackBerry smart phone and my PC. Also, if anyone knows what format they are in (if they bought before Sprint music store).

  To buy another memory card: Where the best place to buy one of these mini memory cards? One of my friends like, a 24 a concert... and I currently have a 2 gig (who, I should mention, is more fricken memory I have in the computer I do not write about this time xD) how can I find out if the card is compatible with my camera?

  WTF @ Redlight?: From time to time (we can always do that, I'm not sure), the little red light at the top of my unit starts to blink even if I do not have a weak battery or not new messages. It first happened lastnight when a friend sent me 3 IMs at once. I had to reboot my device and I think that he is stopped. Earlier, it happened again (I had several new messages) and this time whenever my display is on, the light was red only flashes do not. It can always be like this now, but I'm not sure. My camera is in the other room and I'm too lazy to check xD. Why would he do that? How can I get him to stop?

  Turn off the sound of the camera?: My camera makes the shutter of the camera, even when noise silence. Is there a way to stop this?

  
  

  Auto keyguard: I have EPIC hand-dial to people purse. In my view, it has a keyboard lock button in the dashboard of BlackBerry (that is the correct term for this?) But I want to get to the place where the keyboard auto-lock after a certain period of time. Is this possible? I saw somewhere about pressing the button mute will lock it... who is the top/center of the unit button?

  Key blackBerry?: Well, don't laugh, I know that I'm retarded. But, the key to the left of the beach towel... than the devil who called? He got the BlackBerry logo on it... is what he called the BlackBerry button? I know, I know, I'm retarded and could probably flip through the manual to figure it out... but still. I might as well ask now xD

  
  

  Choose the icons to display on the main screen: When I added an e-mail address, he put an icon on my main desktop, in the row of icons at the bottom of the screen. (where is my background image and all that). Can we choose the icons that we want to display on the main screen? I have really now, my calendar icon that I know that I use. I'd love to move the keyboard lock button here though... is it possible?

  Speaker?: How can I get speaker? xD

  Theme Studio (software, no associated device): Anyone used this? It is quite easy to use? I am tech savvy, but I don't want to just download a ton of programs on my PC that I won't use xD I'm working on the Desktop Manager and it takes forever. I want to make themes, but I'm curious to know how easy to use this program is... graduate to use design or if it would take a graph xD

  Well, then, I think that... Think THAT that's all. I can change this highest position (if we are allowed to edit) to delimit what questions have been answered. I hope someone sees this soon enough, that I don't know how "living" these forums are.

  Thanks for looking, and I warned you... they have been the newbie questions! xD

  -Darky Delacroix

  Welcome to the SkippyTheWonder forums.

  SkippyTheWonder wrote:

  Good, please excuse my ignorance... guys xD

  I just bought two s BlackBerry Curve 8530 from Sprint. I'm pretty tech savvy, but there are some things about this phone, I can just enter in two or three days I got em:

  Deleting photos: Well, then I'm in my media folder, in the images. I selects a photo and press the BlackBerry button and select Delete. Then he said: it is read-only, and when I remove it, the icon is still there. I tried to turn on/off the device, and it's still there. Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared. I was also able to delete using the "BlackBerry" button and then "delete". It doesn't give me that read this option.

  Saving images: So, for some reason I can't save more photos. I don't know even how I saved the first 12 photos I have taken... but now it won't save any more. What the hell happened? xD I have a 2GB card in my phone... surely these 12 images didn't fill in this card... Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared.

  Buy ringtones: On my old phone LG, I used to buy ringtones RealTone Jukebox... where they had extracted from songs that I could download for a crazyhigh. Where can I buy the real music ringtones for BlackBerry? What I do myself?

  There may be an icon on the home screen of your camera to buy ringtones. Or you can open the browser and go to http://mobile.blackberry.com. There is a link of ringtones that you can click

  Media moving to my PC?: I went through the music store of Sprint comes with my camera, and two purchased songs. I want to know if I can get these songs out of my BlackBerry smart phone and my PC. Also, if anyone knows what format they are in (if they bought before Sprint music store).

  It is recommended to buy a microSD card to store your multimedia files, if you run out of memory on your device.

  
  

  Depending on what OS is your BlackBerry tells you what size you can buy a microSD card. You can check under Options | Topic (will appear as v4.xx.xxx). Look at the table on the following link to see what size you can get - http://www.blackberry.com/btsc/KB05461

  
  

  On the BlackBerry, go to Options | Media Media Card recommended parameters are:

  
  

  Media card support: WE

  Encryption mode: NO

  Mass storage support: WE

  Auto enable mass storage Mode when connected: YES

  
  

  Mass storage mode allows your BlackBerry to act as an extra drive when it is connected to your PC. It will appear as an extra drive letter in Windows Explorer. So you can just drag/release the multimedia files on your memory card

  WTF @ Redlight?: From time to time (we can always do that, I'm not sure), the little red light at the top of my unit starts to blink even if I do not have a weak battery or not new messages. It first happened lastnight when a friend sent me 3 IMs at once. I had to reboot my device and I think that he is stopped. Earlier, it happened again (I had several new messages) and this time whenever my display is on, the light was red only flashes do not. It can always be like this now, but I'm not sure. My camera is in the other room and I'm too lazy to check xD. Why would he do that? How can I get him to stop?

  Here is an article that describes the status of the LED

  http://www.BlackBerry.com/BTSC/KB03897

  If you want to disable the LED check this KB article

  http://www.BlackBerry.com/BTSC/KB10721

  Turn off the sound of the camera?: My camera makes the shutter of the camera, even when noise silence. Is there a way to stop this?

  Check out this post

  http://supportforums.BlackBerry.com/T5/BlackBerry-Pearl-BlackBerry-8100/turning-off-the-camera-Shutt...

  
  

  Auto keyguard: I have EPIC hand-dial to people purse. In my view, it has a keyboard lock button in the dashboard of BlackBerry (that is the correct term for this?) But I want to get to the place where the keyboard auto-lock after a certain period of time. Is this possible? I saw somewhere about pressing the button mute will lock it... who is the top/center of the unit button?

  Key blackBerry?: Well, don't laugh, I know that I'm retarded. But, the key to the left of the beach towel... than the devil who called? He got the BlackBerry logo on it... is what he called the BlackBerry button? I know, I know, I'm retarded and could probably flip through the manual to figure it out... but still. I might as well ask now xD

  Called the menu button

  
  

  Choose the icons to display on the main screen: When I added an e-mail address, he put an icon on my main desktop, in the row of icons at the bottom of the screen. (where is my background image and all that). Can we choose the icons that we want to display on the main screen? I have really now, my calendar icon that I know that I use. I'd love to move the keyboard lock button here though... is it possible?

  If you select an icon, click the menu button and choose move. You can rearrange the icons. The icons in the top 5 on the list will be those along the boittom when not looking at the full home screen.

  Speaker?: How can I get speaker? xD

  Can try to hit the key ' $' as a shortcut to activate speaker. During a call, you can click the menu button and choose the speaker phone option in the menu

  Theme Studio (software, no associated device): Anyone used this? It is quite easy to use? I am tech savvy, but I don't want to just download a ton of programs on my PC that I won't use xD I'm working on the Desktop Manager and it takes forever. I want to make themes, but I'm curious to know how easy to use this program is... graduate to use design or if it would take a graph xD

  Not sure about that sorry.

  Well, then, I think that... Think THAT that's all. I can change this highest position (if we are allowed to edit) to delimit what questions have been answered. I hope someone sees this soon enough, that I don't know how "living" these forums are.

  Thanks for looking, and I warned you... they have been the newbie questions! xD

  -Darky Delacroix

• Newbie question: to access the items in a locked file "kind of."

  Newbie question: a friend (who is not accessible now) has sent a file I. Vector graphics are enclosed in a blue box. I can move the whole box within the artboard and you can add other items, but I can't change the existing components. Unlock, dissociate are gray. How can I get 'in' components?

  Look in the layer panel and see if the layers are locked. You can also check in tracks mode and see if there is really something out there, or if it has been saved as an image.

• Newbie question - how to effectively check if photo is part of the selection

  Hi all

  Sorry for the newbie question, but I do not know how to solve, and I'm sure that there is a quick and easy answer to this:

  My goal is to get all the 'stack heads' (photos with Position 1 in batteries) selection ('photos' below).

  for I have, make photo in ipairs( photos )
  local date = picture:getFormattedMetadata("Filename")

  if Photo:getRawMetadata( "isInStackInFolder" ), then
  - Photo is in a stack
  local photoHeadOfStack = picture:getRawMetadata("topOfStackInFolderContainingPhoto")

  local stackPos = picture:getRawMetadata( "stackPositionInFolder" ), - get the position in the stack
  local photoHeadName = photoHeadOfStack:getFormattedMetadata("Filename")

  app:logVerbose(' Photo nb ^ 1, name ^ 2 is in a stack with the position ^ 3 ', i, date, stackPos"")

  if stackPos == 1 then
  - photo is the master of the battery
  stackTop[#stackTop+1] =photo
  app:logVerbose(' picture ^ 1 is the top of the stack ^ 2 ', date, #stackTop)

  -check if couple if it is correct
  elseif photos. photoHeadOfStack then
  app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") (Top of the stack already selected", date)

  other
  stackTop[#stackTop+1] =photoHeadOfStack
  app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") Top of the stack ^ 2 - ^ 3 ", date, #stackTop, photoHeadName)

  end
  end
  end

  
  

  In the if structure in the center of the Position in the stack control, if the Position is not 1, I would check if the photo to the stack ("photoHeadOfStack'") is part of the 'pictures '. I tried 'elseif photos.photoHeadOfStack then' and ' elseif photos [photoHeadOfStack] then ' but it doesn't work-> This elseif is never true even if 'photoHeadOfStack' part of the 'photos'.

  Any way to have this check done without checking the photos "manually"? (via e.g. a loop for)

  I'm sure that Lua offers this, but I do not know how...

  
  

  Thank you for your support!

      --[[ This code creates "stackTops", an array of LrPhotos that are the
      tops of all the stacks containing photos in the array
      "photos". ]]
  stackTopSet = {}
  for _, photo in ipairs (photos) do
      local stackTop = photo:getRawMetadata ("topOfStackInFolderContainingPhoto")
      if stackTop ~= nil then stackTopSet [stackTop] = true end
      end
  stackTops = {}
  for photo, _ in pairs (stackTopSet) do table.insert (stackTops, photo) end
  

• [Newbie question] How is-13:00 or by e-mail a link of Dell on the Community Council?

  [Newbie question] How is-13:00 or by e-mail a link of Dell on the Community Council?

  Once I click on a name of Dell link to access their profile. Currently, I don't see a where clause to send a private email Message. What Miss me? Thank you.

  A screenshot of the view that I see when I click on the link Dell profile is attached.

  

  My apologies, unlike most of us, DELL-Lorna M does not accept private messages. You will have to send him directly.

• Newbie Question: What should I put in for "Hostname" in the DNS Configuration during install ESXi

  Note: I'm not a professional but rather an amateur trying to test the power of virtualization technology. I understand the IP addresses and how to configure my router, Setup static IP address and build my own computer, but I have some limited knowledge when it comes to the configuration of the servers. All I want to do is use this ESXi server locally in my house to run several operating systems on one physical box. I really don't want to have a server on the internet, I think that Comcast doesn't let me run the servers with dynamic IP package I have. In any case, here's my problem:

  I followed with the installation of the link video tutorial ESXi in the intro email vmware sends you after registering. I'm around the 14:30 mark minute now where we are the management network configuration in the configuration menu of DNS.

  The tutorial guys sets its hostname to something he obviously installation but mine appears as "localhost.hsd1.ca.comcast.net". I do not understand what I do when I set up a host name - and as I said above, I don't want to be put in place a server on the comcast network.

  I think I'm a bit confused and don't know what to put in host name. I tried "localhost" and also "localhost.hsd1.ca.comcast.net" but hen t when I chose "network of test management", I got a message of failure for hostname.

  Sorry if it's a super newbie question, but I will not continue to implement virtual machines or what then if this setting is incorrect. I appreciate your time in reading this / to help me. Thank you.

  UPDATE: Ok, so since I'm impatient, I tried just letting the host name to what it was and continues with tutorial and realized that I could simply type the address static IP address from my ESXi server in my web browser from another computer on my home network to get the VI of the esxi Server client , then I typed just 192.168.1.50 which is that I put it was and it was successful! Is there a reason to set a host name then?

  So, my next question becomes: can I run my windows XP 64 OS at the same time as the ESXi Server? Each are installed on different disks in the same physical box, but this computer is one of my main computers that I work on in windows every day so ideally I would have ESXi running but also be able to use the base operating system. Is this possible or am I just dreaming / confused?

  Your welcome hardnesses, I think you can try to re-insalling ESXi with the hostanme you want, or you can connect to the existing installation with an unsupported option and try the same thing.

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

• Newbie question - alternating scenes in order using an audio track?

  Hello

  I filmed a musical school on 2 different nights.  Stage left the opening night and just Stadium last night.  All I want to do is use left step my main video and the audio track, then switch right of the stage sequences as needed.

  Left of the scene is clearly the best audio track because I was closer to the piano.  However, at certain times, right Stadium has a better POV through the action onstage, accessories, etc.  They slightly sped through the night last too so I have a few audio challenges of synchronization when using the images on the right of the scene.

  Anyway, here's where I am lost.  What is a cam multi task?  Or use the video 1 & video 2 track, if so, how?  Or should I cut the left and right of the stage scene scenes independent and mount it on 1 video all in order?

  I am without PP6 terminology to locate this answer in the help section, but learned some other great things by looking at .  I have CS6 and am a former loser of Pinnacle Studio, uh, I mean the user.

  Please tell me the commands/functions, I need to learn this task.  Thanks in advance for your help.

  JM

  Oh, I tried that.  Definitely * not * a multicam project (except if you really want to tear your hair out!).

  Because the timing is different on the two nights I recommend the implementation of these two shows in their own distinct sequences.  Stage left will be your primary, finished, sequence and allows you to define the right of the stage video and audio to be on track 2 (you'll need audio for reference and you will sometimes even use it).

  Through the performance of the stage left and split the video to any points you * know * you'll want to use another camera angle.  Start with the scenes of 'must-use' and then go to the scenes 'like to use' - you will need to practice!

  Disable clips of the scene left you use (or drop the opacity to 0%).  You should leave them in place, however, for reference.  Find the corresponding scene on the sequence of the scene to the right.  Cut it out and paste it on track 2 of the same scene in the sequence of the scene to the left (bring audio along for the ride too).

  Here's where the magic 'edition' (read: crazy) is available in.  Finessse the entry points and each camera (you'll end up setting two of them) until you like the cut.  Sometimes, the clip of the scene right will be longer than the same scene on the camera of the scene to the left.  Sometimes, it will be shorter.  Cut your master timeline as needed; If the new right scene is longer, just lop off the stage from stage left.  If it is shorter, leave a space or drag the hidden a little scene.  The idea is to keep as "synchronized" as possible to the end.

  You'll quickly learn when you can (and I can't) cut the songs!  Depends on your individual sellers, but will quickly become apparent.  You will also notice small (sometimes not so subtle) changes in costume, hair and makeup, not to mention the value of decoration and lighting.  You can sometimes get around these.  Sometimes you have to sacrifice your change to hide.  If you're very, very lucky you will have turned in very high HD.  If so, feel free to re-align your shots (i.e., zoom or pan).  Out and then put it on a standard def DVD and it will look wonderful!

  Oh Yes... Another thing... the * next * time for that (and if you do successfully this time * will * be a next time!), turn in high definition and beg, borrow or steal a second camera.  Set the second on the back of the House (or somewhere, he can see the whole show).  Then, you can be free to actually follow the action with your primary camera knowing that there is an 'insurance' static shot that you will be able to synchronize to the top.  * Who * will be a multicam edition!

• When I go to save, or export a document, my columns of dialog windows are all screwed up. Question: how to format them so that they are permanently attached? I'm tired of dragging the column over and over again. See for example the attached screenshots

  

  Open the dialogue window, the column width should expand. The new dialogue window size must be the same for subsequent exports. If you want to change the default column size, hold down the option key when you drag the small dividing line between the columns, (even if the new size apply to export and save the window).

• By dragging a scene on a clip (in the first) does not work

  Tutorials, I looked and I can't work this.

  I've created a script. I see it appear the Adobe Story tab in first. I try and drag an item in the project window and I see a hand and a circle with a cross through it.

  I'm dragging the text under the word 'Scène', as the video on this page.

  What I am doing wrong?

  This thread help me?

  Prelude CC - analyze the content/history integration grayed out