By specifying print restrictions detailed in GBLink

Similar Questions

• Print when detail overflows Question

  The option "Print when detail overflows" is supposed to work this way or I do something wrong? States to help...
  
  "Print when overflows retail indicates if an item prints only after a page or column break. Specify True or False. The default value is False. For example, you can set this to true to print the word more... after a page or column break. »
  
  Which seems to say that if mark you an item owning this property, it will appear on the 2nd, 3rd, etc. pages or columns. Now I have a multi-column subreport and I want to display the notice "continued" on the following columns, but when I change this property to true it puts on each column, even the first! It seems to me that it is not supposed to work this way because on the Help menu, it says that it "will only appear after a page or column break. Has anyone else had a problem with that, or I'm just on something that will remove the exit on the first column?

  You don't know if it's a bug or not, but I found how to fix this problem. In the case of a report that spans several pages, I also have to define the category 'Print when' to 'Calc. WG 1 "COMMENTS.

  However, for a multi-column report I must define the category "Print when" in "query. CurrentRow WG 1 ". I am sure that this also works for the method above, but I have absolutely no desire to check right now.

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

  I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

  When you try to remove the drivers under properties of the print server, I get the following message:

  "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
  Impossible to remove the hplj1020.inf package. Access is denied. »

  someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

  How can I remove the drivers?

  Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• Print commerceItem details

  Hi all
  Please check below and clearly indicate to what logic should be used in which senario to print the details of trade items:
  [1] < bean drop = 'ForEach' >
  "< param name ="table"value="/atg/commerce/Shoppingcart.current.commerceitems ">
  < param name = 'elementName' value = 'item' >
  < name oparam = "output" >
  ..................
  < / oparam >
  < / drop >
  
  [2] < dsp:droplet name = "ForEach" >
  < dsp:param name = "array" bean="CartModifierFormHandler.order.ShippingGroups"/ >
  < name dsp:param = "elementName" value = "ShippingGroup" / >
  < name dsp:oparam = "output" >
  
  < dsp:droplet name = "ForEach" >
  < name dsp:param = "array" param = "ShippingGroup.CommerceItemRelationships" / >
  < name dsp:param = "elementName" value = "CIRelationship" / >
  < name dsp:oparam = "output" >
  CIRelationship.commerceItem. * etc...
  < / dsp:oparam >
  < / dsp:droplet >
  < / dsp:oparam >
  < / dsp:droplet >
  
  [3] < bean drop = 'ForEach' >
  "< param name ="table"value="/atg/commerce/CartModifierFormHandler.order.commerceItems ">
  < param name = 'elementName' value = 'item' >
  ..................
  < name oparam = "output" >
  ..................
  < / oparam >
  < / drop >
  
  -RMishra

  Using (1) helps you retrieve the basket and display elements on any page. This is the mechanism by default since you have access to the command and you can get anything here without having to create other objects.

  Using (2) & (3) would create component in each jsp based application that you access. Why would you create an extra in the JVM object when you already have access to it. The concept of query/session scope comes into picture.

  -Kiss

• I can't view and print details in the Windows experience index, when I click on the display and printing of details.

  When I click on the button check printing details and it appears a message saying not able to create Details page.
  How can I solve this problem? for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Hi Alex,

  Thank you for using the Microsoft answers Forum!

  From my research, I suggest you try the following steps.

  Method I - execute a System File Checker tool.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your

  password or click on continue.

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  Once the completed scan, a test to see if the problem you are experiencing is resolved

  See this link for more information about the System File Checker tool.

  http://support.Microsoft.com/default.aspx/KB/936212

  Let me know if it worked

   

  Kind regards

  Karena a: MICROSOFT SUPPORT

  ------------------------------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• point to the existing pdf file and print to the specified printer (no default)

  Yes, several messages on the creation of pdf files, but have not found help send a pdf file to a folder on a default printer.

  Suggestions?

  have you tried using ActiveX?

• Get message specified print monitor unknown when you try to install the Dell A920 printer. Any ideas?

  Try to reinstall the Dell A920 printer. He stopped working because I kept getting a message saying "soecified unknown print monitor. I removed it by using control panel/Add Remove Programs, now I can't reinstall it on the CD. I get the above message when trying to load it.

  Thank you.

  Problem solved. A server called LexBce did not work, it has been disabled.

  To fix it, I went to start / my computer

  I have a click right on my computer and select manage. When the window open, I open Services and Applications, and then open Services. I then scroll to LexBce Server, open only to the top, under the general tab change the startup type to automatic, and restarted the machine. The Dell software then loaded properly and now the printer works.

• print the details of an individual selection from Windows Media Player

  I would like information on how to print the contents of a list of individual reading of the Windows Media Player. I tried the exporter of information media, but it exports all my playlists. Is there a way I could pick only playlists that I need or one at a time?

  Media Info exporter can export playlists too. To do this, click playlists in the sidebar left WMP, right click on the playlist you want to export and select send to - Media Info exporter . Tim Baets
  http://www.BM-productions.TK

• Printer through Microsoft problems. -Printer prints a details page after each page I print

  I had problems with my printer, printing a message page after each page to print. Even if I prtint 5 pages in a row, there is a page after each copy that indicates: in the format below:

  File name,

  Directory,

  Model,

  Title,

  Object

  Author,

  Key words,

  Comments,

  Date of creation,

  Number of change,

  Last record

  Last saved by.

  Total editing time,

  Last impression,

  From the last complete printing, etc.

  I had the Brother printer people help me and they say that it is the problem of Microsoft Software.

  How can I get rid of this annoying and useless prolblem. It cost me tons of sheets of paper wasted with the information above on any paper that is printed?

  The support of brother confirm that the version of your installed printer software is supported in IE9 (yet)?

  Printing webpages in Internet Explorer 9: FAQ
  http://Windows.Microsoft.com/en-us/Windows7/printing-webpages-in-Internet-Explorer-9-frequently-asked-questions

  You cannot print or preview before printing a Web page in IE9 (15 Apr-11)
  http://support.Microsoft.com/kb/2409656

  You cannot print or print preview the Web pages in IE7 & higher (Win7 or Vista)
  http://support.Microsoft.com/kb/973479

• PDF file with print restrictions still prints from gmail browser

  I saved a pdf file that is password protected. The file is quite locked, no no printing, no images, no text copy change...

  But the problem is that when the file is considered to be an attachment in gmail and return 'Preview' of the browser mode (in this case, firefox) it can be printed from the browser. a way to solve this problem? basically adobe security was bypassed easily even without a sophisticated hack. #disappointed adobe!

  Actually, it depends on how you password protect a document. If you just put a password on the file, but don't encrypt, Yes, not comply with can applications rules and opens the PDF file. But you can encrypt.

  See Security with passwords, Adobe Acrobat PDF files.

  -Dov

• Unable to connect to a network printer, but can see and discover

  I'd appreciate any help with this: I have exhausted my Google searches for most of the day, and Microsoft support articles are of course a great help.

  The problem: I have a printer installation on one of the XP Home computers in our home network (all the XP Home computers). I am trying to connect to this printer from another computer, but I'm unable to add through the "Add printer" Wizard While I can see the printer in the list of printers on a network (including two other printers on other machines that work), when I try to connect to this particular printer in question, I am struck with a challenge to connect with what seems to be the guest account on the computer. There is no password for this account so I leave the password blank, and I then told me that I do not have sufficient permissions. I don't know what to do.

  A few pieces of my Google-ing info that may be useful:

  (1) I made sure that the guest account is enabled and even perform the active command of the net user on the computer in question.
  (2) I use Windows Firewall and I said to turn on the printer and file sharing and have exceptions for such.
  (3) I use Microsoft Security Essentials.

  (4) given that it is XP Home of course I can't access everything related to security or other policy.

  In addition, whenever I try to access this computer on the Working Group, it says I have "insufficient permissions". I don't know what it means that I've never been specified no restrictions when I ran the Network Setup Wizard.

  Windows networking works better if you have matching user accounts password on each machine rather than try to rely on the guest account (which is a security hole).

  See the following tips from the old MS MVP Malke.  He's old, but it's always good.  Not everything can be applied to your situation; Take the parts that do.

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• OfficeJet Pro 8620: Officejet Pro 8620 - after software download on 4 March 2016 printer fails to detect the paper in the tray

  Hi, I downloaded and installed the latest version of the software on March 4, 2016. But after the installation of the software can not print as printer detects no paper and poster-error "on paper" message even if the paper tray is enough. The printer was working fine before the upgrade of the software. The printer is only 2 months old.

  Hi @Al2016,

  First of all, welcome on the HP Forums, as you know it is a big thank you to get help from community members! To ensure that the paper error output is not hardware related, please make a copy and let me know if it works. A successful copy determines that the problem is actually related to the software. If you can not copy, it's a hardware problem and we will focus on the material.

  If you determine that the problem is hardware related, please use the following to fix the problem: a Message displays "paper" and does not Pick Up paper from the printer. "

  In the unlikely event that you can copy do not print, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).

  The installation screen and the software opens and you can click on connect a new printer.

  Please let me know the results of your efforts and I will get back to you. If one of the suggestions I did resolve the problem, please click Accept as Solution button below so that others may see that your problem is solved! Thank you.

• How to print a list of your Skype to go number?

  Early on when Skype to go has been beta-testing, he had a "print" button so you can print the details of contact of STG and numbers, then one day he disappeared.

  Please bring back, even necessary, so now that you can have up to 30 numbers. At the moment I'm screen shotting, cut and paste in Microsoft Paint - a real pain especially because my list is constantly changing. The clues, please.

  tonyisburntout wrote:

  Please bring back, even necessary, so now that you can have up to 30 numbers.

  Hello

  I'll raise your request at our next meeting.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Photosmart HP 6520 printer: hp photosmart 6520 cannot set print at 100% scale/size

  What CD jewel box impression label width and higth suddenly became smaller. It works perfectly until recently. Have uninstalled and reinstalled the printer and drivers, but I am unable to find how re set the scale to 100%. in this hp6520 Photosmart printer.

  Any help would be appreciated: very happy smiley:

  After watching your @dlddemonscreenshots, I see that you use the HPDD896C (HP Photosmart 6520 series), it is a driver not driver HP class.

  I suggest all first to remove this driver and add the printer again. In fact, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).  The installation screen and the software opens and you can click on connect a new printer.

  Once you have added the HP driver, try to print a label again and let me know the result. In addition, you may need to change ' borderless printing: Print with border ' borderless Print.

  Let me know how it goes.