c drive is not available after refresh of windows 8

My computer won't start so I decided to update it.

Hi Renon,

I suggest you perform a complete system recovery to solve the problem. Follow the steps here: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1031321

Note: If my post answered your question, please mark it as an "accepted Solution".

Tags: Sony Computers

Similar Questions

  • Bluetooth not available after update of Windows 10

    I have problems with my Yoga 260 after that windows update 10. Bluetooth is not available even in Device Manager. Any tips?

    Problem solved. Under system services, Bluetooth was arrested. Re start the service and solve the problem.

  • HP envy 15 notebook PC: Beats audio not available after update of windows 10

    Hi, I would like to know the characteristic audio Beats that isn't on my laptop anymore, after I've updated for Windows 10 he disappeared and now the audio on the laptop is not the same of course. The quality is worse.

    How can I get it back?

    Thank you

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

    When the reinstallation of Chipset has completed, restart the laptop.

    When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

    Kind regards

    DP - K

  • Drive external DRIVE will not mount after resizing in Windows

    Hi all

    I got a 1 TB external drive that I used for a while about 10 Windows and OSX (El Capitan). I had two partitions Configuration for use on every platform without any problems.

    Then, I needed extra space on the Windows partition, so I think that, if I remember correctly, that I've resized using the disk management tool in Windows. I reduced the OSX volume and increased the size of the Windows volume. I can probably hear you all shout now.

    Surprise, my volume OSX will now not mount when I run in El Capitan. It does not show in disk utility, and the only way to 'see' it is using diskutil:

    Output: Diskutil list

    / dev/disk2 (external, physical):

    #:                       TYPE      NAME                                                            SIZE        IDENTIFIER

    0: GUID_partition_scheme * 1.0 TB disk2

    1:                       EFI EFI                                                                         209.7 MB  disk2s1

    2: 000100AF-4028-0006-2192-BA7200000000 650,3 GB disk2s2

    3: 000100AF-7220-70FB-2192-BA7200000000 23.7 GB disk2s3

    4: Apple_HFS Install OS X Yosemite 5.7 GB disk2s4

    Output: Diskutil list cs

    CoreStorage groups of logical volumes (1 found)

    |

    + Logical Volume - Group DD8EBA77-8349-4762-BD32-4D45402DDE23

    =========================================================

    Name: Macintosh HD

    Status: online

    Dimensions: 120473067520 B (120.5 GB)

    Free space: 12656640 B (12.7 MB)

    |

    +-< physical="" volume="">

    |   ----------------------------------------------------

    |   Index: 0

    |   Disc: disk0s2

    |   Status: online

    |   Dimensions: 120473067520 B (120.5 GB)

    |

    + -> 70EB98AB-5D10-4774-89C9-F66D334A7BA0 family of Logical Volume

    ----------------------------------------------------------

    Type of encryption: AES - XTS

    Encryption status: unlocked

    The conversion status: complete

    High level queries: secure

    |                        Password required

    |                        Accepts new users

    |                        A visible users

    |                        At the Volume key

    |

    +-> Logical Volume BEE2BAE7-909A-42F8-91F1-55085485904A

    ---------------------------------------------------

    Disc: disk1

    Status: online

    Size (Total): 120108089344 B (120.1 GB)

    Reversible: Yes (unlock and decryption required)

    Put the situation: Restart required

    Name: Macintosh HD

    Volume name: Macintosh HD

    Content indicator: Apple_HFS

    Output: TPG - vv - r sudo show/dev/disk2

    See the TPG: / dev/disk2: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

    See the TPG: / dev/disk2: MBR suspicious to sector 0

    See the TPG: / dev/disk2: Pri GPT to sector 1

    See the TPG: / dev/disk2: GPT Sec at sector 1953525167

    start index size summary

    0           1         MBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 1270198464 2 part TPG - 000100AF-4028-0006-2192-BA7200000000

    1270608104 624918840

    1895526944 46298496 3 part TPG - 000100AF-7220-70FB-2192-BA7200000000

    1941825440 262144

    1942087584 11175400 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

    262151 1953262984

    1953525135 32 table dry GPT

    1953525167 1 dry GPT header

    Output from: sudo fdisk/dev/disk2

    Disk: geometry / dev/disk2: 121601/255/63 [1953525168 sectors]

    Signature: 0xAA55

    From end

    #: cyl hd s - cyl hd s id [Start - size]

    ------------------------------------------------------------------------

    1: EA 1023 254 63 - 1023 254 63 [1-409639]

    2: AF 1023 254 63 - 1023 254 63 [409640-1270198464] HFS +.

    3: 1023 254 63 AF-1023 254 63 [1895526944-46298496] HFS +.

    04:00 0 0 0-0 0 0 [0-0] unused

    #2 partition is my concern. It contains my library, iPhoto and other important pieces.

    So, is anyway that I can get it back? What can I do to try to preserve its data? Thank you very much! Chris

    It comes out by any other command that could help someone point me in the right direction to solve this? Thank you

  • CD/DVD drive does not work after 8 Win instalation

    Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

    When I put the blank cd and try to open it, it gives me error when opening by saying:
    "windows could not complete the format".

    Who's a software or a hardware problem?

    waiting for help!

    This means that your CD/DVD drive no longer works and is not recognized by the system?

    If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

    + Why my CD/DVD drive does not work after upgrade to Windows 8? +
    http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

    You must uninstall the programs from Toshiba:
    TOSHIBA Recovery Media Creator
    TOSHIBA Disc Creator

  • The model name of my DM9601 To Fast Ethernet adapt is DM9601 to Fast Ethernet Adapterhas has stopped working correctly because a compatible driver is not available for this version of Windows.

    has stopped working properly because a compatible driver is not available for this version of Windows.  This is the error I get and it made my computer unable to re boot. Please help me how to set right.

    Thank youy

    Hello

    you left in the name of material on

    DM9601 USB to Fast Ethernet card; fix?

    and sorry, but I cannot find a driver for him after XP

    you are also posting in the wrong forum

    Try the forum hardware and drivers

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

    or contact the hardware manufacturer

    they write drivers for their products, not from microsoft

    ______________________________________________________

    try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  • Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

    HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

    Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

  • EQL PS6010 online and I want to upgrade the capacity of the disk but original Dell drive are not available, it is possible to replace it with the original brand of Seagate.

    Hello

    One of my largest clients use a PS6010XV storage in production for 3 years. It is equipped with 8 disks SAS 600 GB drive HARD 15'000 rpm and shortly it will be out of space. He ask me full fill the table with hard 16 600 GB.

    My sales representative Dell told me that this kind of upgrade is not possible, the 600GB 15,000 rpm SAS drives is not available...

    My client is very upset by this situation and I'm trying to find another solution.

    Is it possible fill completes the picture with the original disc Seagate Cheetah 15K 3.5 "600 GB SAS 6 GB/s 24 x 7, type ST3600057SS instead of the original Dell disks?

    I can see the Dell drive (P/N 0944832 - 01) are Seagate brand and type is exactly the same.

    Kind eyes and waiting for your response

    Christophe

    Hello

    No, because it is custom firmware on the brand of Dell disks.  The EQL firmware will be search and reject non Dell/EQL brand discs.  Do not add any disk brand would also void the warranty.

    Kind regards

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • Second monitor is not detected after upgrade to Windows 10

    After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

    I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

  • my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    I downloaded the former driver of windows 7 touchscreen and it worked

  • Apple Software Update will NOT work after upgrading to Windows 7

    Apple Software Update will NOT work after upgrading to Windows 7

    flyboy340 wrote:

    Apple Software Update will NOT work after upgrading to Windows 7

    More information is needed.

    Which machine you use, OS X are you running?

    Windows 7 running in BootCamp?

    The OS X app store is not present at all?

    AppStore is present but the update tab does not?

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

    Hello

    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards

    Joe

    SOLVED!


    I uninstalled VMware Player, including the abolition of the configuration files.


    re-installed VMware Player and it worked!

Maybe you are looking for

  • location of Halo 4 leak

    Yes, I found the location of a Web site that is distributing versions of Halo 4 leaks. I'm trying to prevent that all sorts of people have already played and beat the game and I think it's unfair. and I know they get a way with it also. so in order f

  • blue screen STOP: 0x0000007E

    I use XP and this morning I received the following error message STOP: 0X0000007E (0XC0000005, 0X89B8E988, 0XF78DABE8, 0XF78DA8E4) I can't restart in safe mode and the research revealed no information about this error. It started when I tried to deac

  • Unable to get Windows PowerShell to load

    Original title: administrative tools__ can not get the PowerShell window to load Giné

  • HP dv7 volume screen

    I have a dv7-4170us, but I don't know if it's common for all dv7 or simply dv7-4170us or just my only specific.  He got a few days ago and read a comment on amazon on the way when you look at say a youtube video in full screen or play a video game, w

  • ORA-65096 12 C

    Hi all32.Win712 c is now complicating things, they just don't give dba a peaceful lifeSQL > create user JENNA identified by JENNA quota unlimited on users;create unlimited user identified by quota JENNA JENNA on users*ERROR on line 1:ORA-65096: of in