Unable to get Windows PowerShell to load

Similar Questions

• Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

  original title: Windows Mail

  Unable to get windows mail to send or receive.  Get this message error code when you try to send:

  Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
  0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
  To find these server addresses, took some time to locate.  After locating and entering, using authentication
  sign username and password, he kept sign asking repeatedly.
  Any help on these questions would be appreciated.

  POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.

  To find these server addresses, took some time to locate.

  POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

  Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• Unable to get windows update to function 0x8024400a error

  I tried to get windows update to function so I can update my xp prfessional software, but I get the 0x8024400a error message. I tried all the solutions available, but I'm still problems and error of SMEs.

  Hi Larrytravis,

  Did you change your computer before this problem?

  You can follow this link & check if the problem persists:

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  Hope the helps of information.

• Unable to get Windows Update after formatting

  Hi, my computer was not working and decided to format. When I formatted, he reversed himself to XP/SP2. Now I can't get Windows Update to work. I can't update Windows Update, install Microsoft Updates or get updates, not even when I tried to do it from the website. The website shows a couple of updates, but when I try to download/install, it fails.

  It seems I need to update to SP3 to get updates, but when I try this, told me to go to the updates of Windows. And once again. I can't do this, because it does not work. Is there anything I can do to update to SP3 and get my updates?  Thank you

  My computer has been pretty well updated, but now it's back to its native form:

  Windows XP/SP2

  IE6

  Have not reinstalled AV, because the computer is not letting me do

  I have a Super Antisuperware installed at the moment.

  Thank you

  Rosey

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3

  • Windows XP SP3 - read all the prerequisites for a successful installation

  What offers Shenan Stanley is...

  1. Go to this web page: How to reset the Windows Update components? and use the Fix It utility in aggressive mode.

  2. Reset.

  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  4. Reset.

  5. Double-click the installation file downloaded in step 3 and follow the instructions.

  UTC/GMT is 02:03 on Thursday, October 27, 2011

• Unable to get Windows XP back to the top, either normally or in Safe Mode, after the download and installation of the SP3

  Installed Service Pack 3 from Windows Update, now I can't get Windows XP to go back upwards, in the normal way or in any configuration of Safe Mode.  I am in the Recovery Console using my drive now.

  ohnooo313,
  Follow the steps on this post on the forum.  If these elements do not help, then follow the instructions that apply to this article.

  Post back with the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to get Windows Mail Server error: ox8CCC7D

  All of a sudden, I am unable to send "Windows Mail. I have "Vista Home Premium". I tried a "System Restore" twice, but he said he did not restore.

  I have AT & T as my ISP. My number out to SMTP is 25 and incoming is 110. On these boxes, I have not checked "requires authentication. I checked 'Requires authentication' in the box under "outgoing under"Servers"server. Any help would be appreciated.

  Thanks, ptfitzy

  Thank you. I discovered an E Mail I sent that went in my "Outbox". When I deleted it, I sent it and now Windows Mail works now. He was watching me in the face all the time.

  Thank you very much for answering.

  ptfitzy

• Unable to get windows live messenger is displayed on the screen

  I can't get windows live mesenger to arrive on the screen I continues to press the button

  OK the e-mail icon is back on computer.

• Unable to get Windows Update application to work... and all attempts to load updates fail

  Running Vista home Premium
  Service Pack 1
  32 bit OS

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to get facebook page to load

  When I try to go to the page, connect to facebook it will not load.

  Hello

  Check with Facebook help and Support and their Forums.

  Facebook - help and Support
  http://www.Facebook.com/help.php

  Facebook - Facebook Contact and support of Facebook
  http://www.Facebook.com/help/?page=835

  Facebook - Forums
  http://getsatisfaction.com/Facebook

  ===================================================================

  Try to add to your trusted sites in IE - Tools - Internet Options - Security - Trusted Sites.
  (Remove them if no aid or no need).

  https://www.Facebook.com/

  http://www.Facebook.com/

  http://www.Facebook.com/login.php

  http://www.Facebook.com/Farmville

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
  installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
  other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right.
  Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask
  topic here.

  Could be a free - SPYBHOremover - BHO - standalone program, needs no installation, download
  and run--all are not bad but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only.
  http://www.Malwarebytes.org/products/malwarebytes_free

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing
  Come in.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack
  ------------------------------------------------------

  Maybe using Compatibility Mode will help you.

  Introduction of compatibility view
  http://blogs.msdn.com/ie/archive/2008/08/27/introducing-compatibility-view.aspx

  http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

  Some Web sites are not displayed correctly or work correctly in Windows Internet
  Explorer 8
  http://support.Microsoft.com/kb/956197

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Wiped HP rp5700 scrubber and can't get Windows XP to load on it.

  Hi all

  I got the task of cleaning the HDD on a HP rp5700 point of sale computer and reinstall Windows XP. I rubbed the hard drive with Dban Boot and Nuke. Worked perfectly. Hard drive is wiped away. But when I try to reinstall Windows XP, the installation CD seems to start normally and go through the process of loading. But after I receive the windows starting message in the status bar. I get another blue screen telling me that

  A problem has been detected and windows has shut down to prevent damage to your computer

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again follow
  the following steps:

  He then invites me to runCHDSK/F, to see if there is a problem with the hard drive. But do me not not a command-line to do. What I am doing wrong? Should I reformat the hard drive? How to do this without an operating system? Do I need to install a driver? How can I get a CD since there is no floppy drive. DBAN damage the hard drive? XP worked perfectly until I rubbed it. I'm a real loss and under pressure to achieve.

  I need to communicate, I am a technician in audio/video by trade and I am not a newbie to computing. But above all, I work on MAC, and am not a COMPUTER guru. So I'll try to answer your questions to the best of my abilities. I appreciate all patience and assistance that you can give me.

  Thank you!

  If you have the option of Bios Setup to change the disk controller hard AHCI/RAID mode IDE, XP will install without problems, no driver necessary sata.

  If you do not have the setting in the Bios, the driver sata for your machine: is HERE

  The files will be extracted to C:\Swsetup\sp44098 to create a disk for use with the F6 option for the use of install_or with Nlite for wake.

  You can use Nlite to integrate the drivers in a new XP installation cd. NLite will still burn the new cd of XP.
  Very easy, really, just follow the guide below closely.

  http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/

  http://maxeasyguide.blogspot.com/2008/04/preparations-for-WinXP-installation-CD.html

  Download nLite:

  http://www.nliteos.com

• Unable to get Windows XP computer to creat Wi - Fi for printer.

  I bought a HP Officejet 7500 a E910 printer all-in-one.  I have set up for wireless connection.  I was able to access the printer to two computers Windows 7, but when I tried to connect to a Windows XP home computer, I was not able ot creat an access to the printer port.  The wireless network is really operational.

  I tried to install it using the wizard wireless, selected local printer option, then "create a new port" found "Port Discovery from HP (HP Officejet 7500 E910) monitor on the list but he was informed that"specified port cannot be added'. '.

  Is there a way to get this computer to work with the printer?

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Unable to get my iTunes to load after I did an update today.

  I received a notification this morning to update my phone (iPhone 6s) and I did.  Now, my iTunes only opens on a start page and does not load my music.  It just says that my music with a picture of a young girl with a helmet.  It will play in my car, but not individually on my phone.

  Under the Photo of the girl with headphones, there is a red bar with guy in it that says something like "go to my music." Tap on that and it will take you to your music.

• I am unable to get Windows Defender to turn on (he had been on, then returned to off) simply don't respond to a click.

  Windows Defender is disabled; I can't not do back on... no response when I click.

  Windows Defender cannot be used with AVG, McAfee, MSE or Norton.  It is part of the Vista and Win 7 operating system and cannot be uninstalled.  It must be uninstalled XP if you use AVG, McAfee, MSE and Norton.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Windows Defender and Microsoft Security Essentials

  If this does not solve your problem, please post back and elaborate detailed about your computer, AV programs, etc...

• Unable to get Windows XP Pro update

  When you try to install updates for Windows XP Pro, the installatoin fails. He said: "the following updates have not been installed, .net Framework 1.1 Service Pack 1 KB951847, KB2600217, KB2604121, KB2737019, KB2742595, KB2789642." How can I fix?

  View your history of update for the error codes.

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982 (including Windows 8)

  Use the foregoing as guides to solve the problem.

  If necessary, click the following link to download the .NET Framework cleanup tool:

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
   

  You can use this to check what versions are actually installed on your computer:

  The user guide for the .NET framework installation check tool
  http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  If any - relocation order:

  1. .NET framework 3.5 SP1 (this will install the .NET Framework 2.0 SP2 and 3.0 SP2)
  2. .NET framework 1.1 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  3. .NET framework 1.0 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  4. .NET framework 4

  For more information, please visit: http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx

  For .NET Framework 4

  You can try the applicable repair just only the .NET Framework versions affected - http://support.microsoft.com/kb/976982

  Windows XP users follow these steps to repair the installation of .NET Framework 4:

  1. Close all running applications.
  2. Click Start, click Control Panel , and then click on Add / Remove Programs.
  3. Click Microsoft .NET Framework 4 Client Profile in the list of installed programs, and then click Change/Remove.
  4. Select repair .NET Framework 4 Client Profile to its original state , and then click Next.
  5. Repairs completed, click Finish.
  6. Click restart now.
  7. After you log in to Windows, click the Start button, then type Windows Update in the box to search for and then click Windows Update.
  8. Click find updates. When the scan finished, click install updates to Windows.
  9. Follow the instructions on the screen to install the updates of Windows.

  Ref: http://support.microsoft.com/kb/976982

• I have aspire one with 160 HDD. My screen is empty. I put in a car and was able to get windows 98 to load. I have orderd a new h/d, how can I reinstall windows XP?

  Also I can possibly saave this hard drive?

  Hello tbcpat,

  Did you mean "how to reinstall a new copy of Windows XP in your newly ordered HD"?

  Or you meant "You will also record and save all your old HD on sound wave newly ordered data?".

  Fortunately, there is an article on installing WINDOWS XP in the microsoft technical support.

  Try http://support.microsoft.com/default.aspx/kb/316941

  If you have no prior knowledge of the Windows Xp installation by yourself, check out this link
  http://TechRepublic.com.com/2346-10878_11-5181.html (this is a tutorial on installing XP screenshot).

  Thank you and best regards.
  codescientist