Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

Similar Questions

• Dolby audio driver does not load after upgrade Windows 10

  Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)

  Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.

  Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.

• HP s5220f: CD/DVD drive not recognized after upgrade to win 10

  My in-laws improved to win 10 of Win 7 on their s5220f of HP.  Given that upgrade the CD/dvd drive is no longer working or is recogniozed by the computer.  It is not in the list of devices in the Device Manager either.  When you insert a disc turns but obliously that nothing happens, and the drive is not visible in the file Explorer window.

  Thanks for any help you can provide.

  Here's what I found the solution:

  It worked to fix my Windows 10 system. Note This mentions 32 bits, but it worked for my Windows 64-bit 10. This was taken from http://support.hp.com/us-en/document/c03280768

  Resolution 5: Create a registry subkey
  Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go to http://support.microsoft.com/gp/admin
  Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
  To create the registry subkey, follow these steps:
  Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
  Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
  In the navigation pane, locate the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
  Right-click atapi, point to new, and then click key.
  Type Controller0 and press ENTER.
  Right-click Controller0, point to new, and then click DWORD(32-bit) value.
  Type EnumDevice1 and press ENTER.
  Right-click EnumDevice1, click on change...
  Type 1 in the value data box, and then click OK.
  Exit Registry Editor.

  Restart the computer

• CD/DVD drive is not recognized after a partially uninstalled program

  Original title: I need help.  Desperately!

  I tried to remove some old software using the Control Panel, uninstall.  Uninstaller has partially and I got the "Error 1327.Invalid Drive: G:\. "When I reconnected it my drive hard Seagate he came as drive E:\ and my NERO account came as NERO (F).  The E:\ and F:\ use my optical drive names.

  I lost my CD and my readers of DVD-RW/CD-RW drive.  They are not recognized by my computer at all.  Now, my computer is useless, because I can't use readers for entry.

  When I tried the CMD, subst C:\ G: the answer came back no such aminal.  When I uninstalled my two optical drives and restarted my computer, it came back and said optical drive installation failed because the drivers were corrupt.  I can't install the new drivers because my optical drives do not exist.  Should I consider a sledge hammer or staple for repair, or?

  Hello
  You can try a system restore to a prior restore point you have been affected by the issue.
  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  To run the system restore, you can see the following link.
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  
  Hope this information is useful.

• Pavilion slimline s5-1014: CD rom is not working after upgrade Windows 10

  My Cd rom no longer works after upgrade to windows 10.  I read the posts that I should go to Device Manager to update, however it doesn't appear in the device driver.  How to solve this problem?

  Thank you

  Hello:

  Try the steps listed in 4 of the resolution on the link below...

  https://support.Microsoft.com/en-us/KB/314060

• External hard drive is not recognized after Windows Update

  Original title: XP Pro wants to install driver for external hard drive that is Plug-and-Play

  I think that using Windows Update can cause problems (unintentinally or not) for users of Windows XP.

  In a series of accidents with an old computer and reinstall the XP Pro operating system, I discovered that MS Money installing only if it was made before the Windows updates.  (planned obsolescense?) The issue has to do with the removal of the registry AUTORUN file. INF for some new and improved files through Windows Update.  Before the updates, the file exists, and I could install MS money.  After updates, AUTORUN. Missing INF file of the registry.

  Now, I encountered a new problem, and I think that it is also a result of Windows Update.  My external hard drive to IDE, that worked perfectly before on this computer (newer), is no longer recognized and want to reinstall the driver.

  The problem is that it is a Plug-and-Play device, and no driver was needed before updates.  I read somewhere in my many attempts to find a solution that the MS Plug and Play system was replaced by a universal version of this feature (UPNP?)

  It's on a more recent, computer replacement, which came not with a copy of the Windows XP Pro operating system, and I can't just reformat the hard drive and start all over again.

  Someone else has encountered this, and if so, have you found a solution?

  Double Post suite-

  Where is my external hard drive?

  I'm under XP Pro on a Dell Optiplex PC with all the current Windows updates (SP3. Net4, etc..) and last month, I added a USB IDE hard drive. the hard disk enclosure is MASSCOOL, and I used a 250 GB Seagate Barracuda7800. The car worked perfectly until this week. I had the Windows Update critical update automaticlly value and security updates.

  The hard drive has disappeared from "my computer." I tried to plug and unplug in different USB ports, restarted the computer, but continues to receive the "new hardware detected by saying me that new hardware has been detected and that I need to install the necessary driver.

  The problem is that Seagate does not provide any driver for this drive, because it is supposed to be (and was so far) recognized by the Plug-and-Play of Windows XP software. The hard drive enclosure came with a mini CD, but this contains software to use the unit as a back-up, not for storage.

  I can't understand that this change suddenly to believe that something in the Windows updates that have been installed recently changed the command structure, registry files or the drivers themselves.

  I know this is possible, because I've seen what's happened to any program that relied on self. INF file that was originally part of XP. This resulted in programs like Microsoft Money and older versions of MS Office, not being able to be installed by those of us who are not 'technically lit.

  I'm here in left field, or other people have had similar problems? And is anyone know how to solve this dilemma?

  Hello Ron Caley.

  Perform the steps in the link and check.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Hope this information helps.

• HP Pavilion 15 laptop: DVD not recognized after upgrade to W10 player

  Yesterday, I upgraded from Windows 8.1 for Windows 10 on my Hp Pavilion Notebook PC. However, the DVD player is most recognized, and I can't play CDs or DVDs. The DVD drive is hp CDDVW SU-208FB SATA CdRom Device.

  Anyone who can help me?

  I also tried to upgrad an old laptop pavilion of w7 HP to w10. The Graphic was not compatible, the connection to my rooter broke. I went to w7. Today, one of my friends who has an almost new Asus laptop had several problems after the installation of the w10. He returned to w8.1.

• Pavilion 23tm: 23tm Pavilion touchscreen does not work after upgrade Windows 10

  After the upgrade to Windows 10, my monitor touchscreen Pavilion 23tm lost touch.  I looked for a driver on the HP site and it required me to download the HP Support Assistant application.  In other words, the site would not just download an update to the driver.  After you download HP Support Assistant and running this application, he did not find the Pavilion 23tm monitor, then I hit a dead-end.  I think I just need to be able to download the latest driver, but the HP site will not allow it.

  Hi there @jazzquilt,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your touchscreen after that upgrade to Windows 10 and that you have installed the HP Support Assistant for help, but the problem remains. I'm happy to help you.

  The research of the model of the screen, I found a driver Windows 10, below the link. Give it a try, if you have not already.

  HP 23tm LCD Monitor - driver Windows 10

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Pavilion dv5020ca sound does not work after upgrade from xp to vista Home premium

  HP Pavilion Dv5020ca windows vista Home premium

  After the transition from xp to vista will not install the drivers for my sound card and the error message I got was

  cannot find media any help would be apperciated

  Hello:

  See if the works of audio driver XP installation...

  Download and run this driver.  If it automatically installs audio, very well.  If it's not... close any Windows error.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-42513-1&cc=us&DLC=en&LC=en&OS=228&product=3223544&sw_lang=

  Go to Device Manager and click on the multimedia audio controller needing drivers.

  Click the driver tab.  Click on set to update driver.  Select Browse my computer for driver and at the bottom of this window software option, select Let me pick from a list of drivers for devices on my computer.

  Select disc and go to: C:\SWSetup\sp33443\CPL30A5a and select the Conexant High Definition Audio from the list and see if the driver will install.

  Then restart.

• Re: Satellite L300D-11V-CD/DVD drive not recognized after upgrade to Windows 7

  Hi, I have a Satellite L300D-11V model pslc0e and have upgraded to 32 bit Windows7 ultimate. I downloaded all the necessary drivers on the toshiba site, but he acknowledges that he has a cd/dvd drive!

  Can I put any disk in, but it will not load up or even acknowledge that the car exists!

  Help, please!

  Thank you

  James

  Please, read here:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  This is for Vista but works for win 7 too. I checked it myself before.

• HP Pavilion does not start after upgrading Windows 10

  (Sorry for my bad English)
  Last night I started to update my HP Pavilion Windows 8.1 to 10, but I have a problem, because today, in the morning, the update was 99%, and it ended, just after I have shut down the computer and is going to school and when I got home, I turned on my HP and the problem was that the HP logo appeared and he began to load , but he didn't only show anything else than that, so I thought I'd let load after 3 hours, it was still loading and it was reseting every 5 minutes and now I just can't not try windows 10. Help?

  Hi there @lmao1,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that once you tried to upgrade to Windows 10, now stuck on the HP Logo at startup.

  If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

  Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Have you tried a hard reset?

  Have you tried to Test for hardware failures?

  Are - that you receive error messages or error codes?

  You happen to see a blue "option ' screen at all? '"

  Follow these steps to remove and reinsert the memory modules for troubleshooting:

• Compaq Presario DVD/CD drive not recognized after upgrade to 8.1 Windows

  Hello, I recently updated my SR5601UK to Windows 8.1, and he ceased to recognize the CD-ROM drive in Windows.

  The last disc it read was the 8.1 upgrade disk.

  I checked the power and data cables and the two are connected, Bios, recognizes that I checked for upper and lower buffers in the registry and there is nothing to remove.

  No CD/DVD drive is listed in the section 'Devices & readers' on 'This PC' or in 'Device Manager '.

  The powers of disc when a disc is inserted, but nothing appears on the screen.

  I can only find drivers/firmware on the site HP for XP, Vista and 7, but nothing for 8, so cannot say if it is a firmware/driver problem.

  HP Web site says spec of the car but not the manufacturer, so I had trouble finding the update.

  Hello:

  See if the resolution steps 2, 3, 4 or 5 solves the problem.

  One usually does.

  http://support.Microsoft.com/kb/314060/en-us

• My Nec DVD RW ND-3520AW drive is not recognized by the system due to the corruption of recording possible

  I have a Gateway desktop and 510 x 86 with Windows XP Home SP3 and Internet Explorer 8.  My system does not recognize my DVD NEC drive due to recording possible file corruption.  How can I clean or set registry entries and/or device driver and get Device Manager to recognize the drive?

  http://support.Microsoft.com/kb/314060

  FixIt have a bad reputation on this forum, so you can go directly to "fix it myself" bit (for XP).

  Let us know how you go.

  Tricky

• Pavilion dv7: Wireless does not work after upgrade to Windows 10

  After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

  This feature worked perfectly in Windows 7

  No worries.

  Thanks for the actual name of the product from your laptop.

  Let me take a look.

  I will edit this thread to let you know what I found.

  The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

  https://communities.Intel.com/thread/59710?start=0 & tstart = 0

  You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

  I saw them on eBay for @ $20.00 USD

  http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681

• Pavilion slimline 400-034: no sound after upgrade windows 10

  Revently, I upgraded to Windows 10. Now my headphones do not work, there is no sound.  I went to windows web page downloaded all the drivers, uninstalled and reinstalled. I even had a tech guy to do a remote access and try to solve the problem.  He couldn't fix. He always says 'no audio devices installed.  I don't know what to try next... Help?  Thank you

  Hello:

  See if it works...

  Run IDT W8.1 audio driver. If she gets the audio, work great.

  This package provides the driver for the solutions Audio IDT high definition in the supported models that are running an operating system supported.

  File name: sp63932.exe

  Otherwise:

  See this thread.

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_devices/IDT-high-definition-audio-codec-not-working-on/570a5038-e48e-43F3-af75-95da61447c87?auth=1

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4. Select-> Browse my computer for driver software.

  5. Select-> let me pick from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7. Windows has updated your driver software.

  Key is step 6.